Bibliographies thématiques / Peelable films / Articles de revues

Articles de revues sur le sujet « Peelable films »

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Peelable films.
Auteur : Grafiati
Publié le 10 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 24 meilleurs articles de revues pour votre recherche sur le sujet « Peelable films ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Wagle, Pareena G., Simran S. Tamboli et Aarti P. More. « Peelable coatings : A review ». Progress in Organic Coatings 150 (janvier 2021) : 106005. http://dx.doi.org/10.1016/j.porgcoat.2020.106005.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Toader, Gabriela, Aurel Diacon, Traian Rotariu, Mioara Alexandru, Edina Rusen, Raluca Elena Ginghină, Florentina Alexe et al. « Eco–Friendly Peelable Active Nanocomposite Films Designed for Biological and Chemical Warfare Agents Decontamination ». Polymers 13, no 22 (19 novembre 2021) : 3999. http://dx.doi.org/10.3390/polym13223999.

Texte intégral
Résumé :
In the context of imminent threats concerning biological and chemical warfare agents, the aim of this study was the development of a new method for biological and chemical decontamination, employing non-toxic, film-forming, water-based biodegradable solutions, using a nano sized reagent together with bentonite as trapping agents for the biological and chemical contaminants. Bentonite-supported nanoparticles of Cu, TiO2, and Ag were successfully synthesized and dispersed in a polyvinyl alcohol (PVA)/glycerol (GLY) aqueous solution. The decontamination effectiveness of the proposed solutions was evaluated by qualitative and quantitative analytical techniques on various micro-organisms, with sulfur mustard (HD) and dimethyl methylphosphonate (DMMP) as contaminants. The results indicate that the peelable active nanocomposite films can be successfully used on contaminated surfaces to neutralize and entrap the hazardous materials and their degradation products. Mechanical and thermal characterization of the polymeric films was also performed to validate the decontamination solution’s potential as peelable-film generating materials. The removal efficacy from the contaminated surfaces for the tested micro-organisms varied between 93% and 97%, while for the chemical agent HD, the highest decontamination factor obtained was 90.89%. DMMP was almost completely removed from the contaminated surfaces, and a decontamination factor of 99.97% was obtained.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ahmad, Naveed, Danial Tayyeb, Imran Ali, Nabil K. Alruwaili, Waqas Ahmad, Atta ur Rehman, Abdul Haleem Khan et Mohammad Saeed Iqbal. « Development and Characterization of Hemicellulose-Based Films for Antibacterial Wound-Dressing Application ». Polymers 12, no 3 (3 mars 2020) : 548. http://dx.doi.org/10.3390/polym12030548.

Texte intégral
Résumé :
Hemicelluloses are biopolymers with versatile properties for biomedical applications. Herein, hemicellulose (arabinoxylan)-based antibacterial film dressings were prepared and characterized. Arabinoxylan was isolated from psyllium husk. Blank and gentamicin-loaded films were prepared by the solvent cast method using glycerol as the plasticizer. The appropriate composition of the films was obtained by varying the amounts of arabinoxylan, glycerol, and gentamicin. The films were found to be transparent, smooth, bubble-free, flexible, and easily peelable with 2% to 3% arabinoxylan. They had uniform thickness and swelled up to 60% of their initial size. The mechanical properties and water vapor transmission rate through the films were found to be suitable for wound-dressing application. Fourier transform infrared spectroscopy (FTIR) analysis confirmed drug–film compatibility. In an in vitro release study, more than 85% of the gentamicin was released from the films in 12 h. The antibacterial activities of the gentamicin-loaded films were found to be close to the standard gentamicin solution. The films were found to be cytocompatible in cell viability assay. These results suggested that hemicellulose-based films are promising materials for the dressing of infected wounds.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Aithani, Dinesh, Hugh Lockhart, Rafael Auras et Krittika Tanprasert. « Predicting the Strongest Peelable Seal for ‘Easy-Open’ Packaging Applications ». Journal of Plastic Film & ; Sheeting 22, no 4 (octobre 2006) : 247–63. http://dx.doi.org/10.1177/8756087906071351.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Guaragnone, Teresa, Andrea Casini, David Chelazzi et Rodorico Giorgi. « PVA-based peelable films loaded with tetraethylenepentamine for the removal of corrosion products from bronze ». Applied Materials Today 19 (juin 2020) : 100549. http://dx.doi.org/10.1016/j.apmt.2019.100549.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Liebmann, A., I. Schreib, R. E. Schlözer et J. P. Majschak. « Practical Case Studies : Easy Opening for Consumer-Friendly, Peelable Packaging ». Journal of Adhesion Science and Technology 26, no 20-21 (16 mai 2012) : 2437–48. http://dx.doi.org/10.1163/156856111x599544.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Tang, Junlei, Shiyu Li, Yingying Wang, Hailong Zhang, Bing Lin et Mingxian Sun. « Ethyl cellulose based peelable coatings with visual sensing of hydrogen sulfide ». Progress in Organic Coatings 163 (février 2022) : 106617. http://dx.doi.org/10.1016/j.porgcoat.2021.106617.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Gao, Ningjie, Jiwen Li, Wanyu Zhang, Lin Ma, Izuchukwu Kenneth Nwokolo, Fuchun Liu et En-Hou Han. « Double-layer peelable coating with eminent mechanical properties and anti-permeability ». Progress in Organic Coatings 160 (novembre 2021) : 106517. http://dx.doi.org/10.1016/j.porgcoat.2021.106517.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Tanikawa, Kota, Toshihiro Okamoto, Shun Kamada, Ryota Matsumoto, Naoki Tamura et Masanobu Haraguchi. « Fabrication of peelable thin films containing crescent-shaped split-ring resonators for three-dimensional optical metamaterials ». Optical Materials Express 7, no 1 (2 décembre 2016) : 1. http://dx.doi.org/10.1364/ome.7.000001.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Lewandowski, Kevin, Larry R. Krepski et Daniel E. Mickus. « Dry-peelable temporary protective coatings from waterborne self-crosslinkable sulfourethane-silanol dispersions ». Journal of Applied Polymer Science 91, no 3 (2003) : 1443–49. http://dx.doi.org/10.1002/app.13316.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
11

Pujol Pozo, Alberto A., Fabiola Monroy-Guzmán, Diana R. Gómora- Herrera, J. Navarrete-Bolaños et Erika Bustos Bustos. « Radioactive decontamination of metal surfaces using peelable films made from chitosan gels and chitosan/magnetite nanoparticle composites ». Progress in Nuclear Energy 144 (février 2022) : 104088. http://dx.doi.org/10.1016/j.pnucene.2021.104088.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
12

Liewchirakorn, Pitcha, Pumpanchat Suthisamphat, Wannee Chinsirikul et Duangdao Aht-Ong. « Low Haze and Antifog Performance of 2-Layer Poly(Lactic Acid) Based Films ». Key Engineering Materials 751 (août 2017) : 326–31. http://dx.doi.org/10.4028/www.scientific.net/kem.751.326.

Texte intégral
Résumé :
For fresh-cut and ready-to-eat packaging films, antifog additives (AFs) are commonly used to suppress the formation of water droplets on film surface. To date, the type and dosage of antifogging for PLA based film are less studied. Therefore, in this research, films incorporated with antifog additive were fabricated by cast extrusion technique. The migration behavior of commercial polyglycerol ester as selected AF was investigated. The cold fog test results showed that 3.5 and 5 wt% of AF in 20PBAT/80PLA single layer film can provide clear films without droplet of water within 7 days and 3 hours, respectively. For 2-layer films, the presented of AF in seal layer as 95(20PBAT/80PLA)/5 (polyglycerol ester) and core layer of PLA were prepared having different thicknesses of seal layer/core layer of 20/15 and 10/15 μm. The migration rate of AF in thin 2-layer film (10/15 μm) appeared to be higher than that in 20/15 μm film. Films’ surface could become clear without water droplet (rating scale > 8) within 4 days for 10/15 μm and 7 days for 20/15 μm films. Haze of films was analyzed by haze meter. Haze of 10/15 μm film was decreased from 7 to 4.4, while that of 20/15 μm film was also decreased from 10 to 7.9 when AF appeared on its surface. Both films can be a peelable PLA based lidding film product with low haze (< 10 %) and antifog performance (within 1 month). In addition, 10/15 μm film can be an easy peel lidding film since its peel strength was in an easy peel range (6-10 N/15 mm).
Styles APA, Harvard, Vancouver, ISO, etc.
13

Long, Park, Chae, Lee, Bae et Shin. « Preparation of Peelable Coating Films with a Metal Organic Framework (UiO-66) and Self-Crosslinkable Polyurethane for the Decomposition of Methyl Paraoxon ». Polymers 11, no 8 (2 août 2019) : 1298. http://dx.doi.org/10.3390/polym11081298.

Texte intégral
Résumé :
For the fabrication of a peelable coating material that decomposes methyl paraoxone (MPO), a nerve agent simulant, self-crosslinkable waterborne polyurethanes (PUs) containing silane groups at the ends and a metal organic framework (UiO-66) were synthesized. UiO-66 dispersed PU solutions for spray coating were prepared by controlling the amount of silane in PU and the content of UiO-66. PUs with a large amount of silane (more than 7.2 wt.%) were easily gelated by adding UiO-66 because the solution was changed from neutral (pH = 7.3) to strongly acidic (pH = 2.5). Therefore, the silane content in PUs should be carefully controlled for the fabrication of composite films. When UiO-66 was added to the PU with a silane content of 2.7 wt.%, the reinforcing effect by UiO-66 was observed up to 15.3 wt.%, but a further increase in UiO-66 content decreased both the tensile strength and the elongation. The peel strength of the PU composite films on polyethylene (PET) and glass substrates decreased with increasing UiO-66 content, but their MPO conversion increased with increasing UiO-66 content. The PU composite film with 49.5 wt.% of added UiO-66 showed the MPO conversion of 63.2% and was easily peeled off from PET and glass substrates.
Styles APA, Harvard, Vancouver, ISO, etc.
14

Zhang, Jinguo, Evangelos Manias, George Polizos, Jin-Young Huh, Amos Ophir, Ponusa Songtipya et Maria del Mar Jimenez-Gasco. « Tailored Polyethylene Nanocomposite Sealants : Broad-Range Peelable Heat-Seals Through Designed Filler/Polymer Interfaces ». Journal of Adhesion Science and Technology 23, no 5 (janvier 2009) : 709–37. http://dx.doi.org/10.1163/156856108x379182.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Iwasaki, Toshiharu, Wataru Takarada et Takeshi Kikutani. « Influence of processing conditions on heat sealing behavior and resultant heat seal strength for peelable heat sealing of multilayered polyethylene films ». Journal of Polymer Engineering 36, no 9 (1 novembre 2016) : 909–16. http://dx.doi.org/10.1515/polyeng-2015-0383.

Texte intégral
Résumé :
Abstract The effects of processing conditions for peelable heat sealing of multilayered polyethylene (PE) films on heat sealing behavior and heat seal strength were investigated. Two sets of seal bars, knurled shape and flat shape, were used for heat sealing. After the heat sealing, the sealed portion was cooled using a set of cooling bars. Heat sealing temperature was adjusted to yield the heat seal strength of 4.0 N/15 mm, 6.0 N/15 mm and 8.0 N/15 mm at the heat sealing pressure of 0.4 MPa for each set of heat sealing bars. The heat seal strength increased with the increase of heat sealing pressure for the knurled shape bars, while it was less affected by heat sealing pressure for the flat shape bars. In situ measurements of the sealing bar clearance and interface temperature revealed that the reduction speed of clearance was significantly affected by the pressure for knurled shape bars, while it was almost independent of pressure for flat shape bars. Even though the temperatures set for the similar heat seal strength were different between knurled and flat shape bars, the maximum temperatures at the interface were almost identical. The effect of the shape of seal bars on heat seal strength became less significant after the sterilization process.
Styles APA, Harvard, Vancouver, ISO, etc.
16

Suresh, Bobde Suwarna, et Tank Hemraj M. « DESIGN AND STATISTICAL OPTIMIZATION OF MOUTH DISSOLVING SUBLINGUAL FILM OF FIXED DOSE COMBINATION OF DOXYLAMINE SUCCINATE AND PYRIDOXINE HYDROCHLORIDE USING DESIGN OF EXPERIMENT IN THE TREATMENT OF NAUSEA AND VOMITING IN PREGNANCY ». Asian Journal of Pharmaceutical and Clinical Research 11, no 12 (7 décembre 2018) : 202. http://dx.doi.org/10.22159/ajpcr.2018.v11i12.27978.

Texte intégral
Résumé :
Objective: The present research aims at formulating a mouth dissolving sublingual film of fixed dose combination of doxylamine succinate (DS) and pyridoxine hydrochloride (PH) that would provide faster onset of action and hence relief from the condition of nausea and vomiting in pregnancy.Methods: Mouth dissolving films were prepared using a solvent casting technique. A 23 full-factorial design of eight formulations was set up with three independent variables: X1 - polymer 1 HPMC E15 concentration, X2 - polymer 2 HPMC E5 concentration, and X3 - plasticizer PEG 400 concentration. The responses, i.e., dependent variables measured for the study were Y1 disintegration time in seconds, Y2 tensile strength in kg/cm2, Y3 drug release in the percentage of DS, and Y4 drug release in the percentage of PH. All the formulations were evaluated for physicochemical parameters such as clarity, weight, thickness, folding endurance, surface pH, and content. The design expert software 11.0 trial version was used for statistical analysis of the responses.Results and Conclusion: All the film formulations were found to be transparent, non-tacky, and easily peelable having the satisfactory tensile strength and folding endurance. The concentration of polymer 1 and 2 was found to have a significant effect on disintegration time and drug release of mouth dissolving films. The best film formulation DP1 was found to have a disintegration time of 77.66 s and found to release 96.22% of DS and 95.43% of pyridoxine HCl in 21 min.
Styles APA, Harvard, Vancouver, ISO, etc.
17

Iwasaki, Toshiharu, Wataru Takarada et Takeshi Kikutani. « Effect of Processing Conditions on Heat Seal Strength for Peelable Heat Sealing of Multilayered Polyethylene Films with Different Sealant Layers ». Journal of Macromolecular Science, Part B 56, no 9 (18 août 2017) : 709–23. http://dx.doi.org/10.1080/00222348.2017.1369250.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
18

Iwasaki, Toshiharu, Wataru Takarada et Takeshi Kikutani. « Relationship between Cooling Conditions After Heat Sealing and Variation of Heat Seal Strength After Sterilization Treatment for Peelable Heat Sealing of Multilayered Polyethylene Films ». Seikei-Kakou 28, no 1 (20 décembre 2015) : 34–40. http://dx.doi.org/10.4325/seikeikakou.28.34.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Hao, Panpan, Bingyan Sun, Xiaomeng Chu, Yujuan Sun, Xuteng Xing, Shaojie Liu, Erjun Tang et Xiaodong Xu. « Effect of castor oil based urethane oligomer on properties of UV-curable pressure sensitive adhesive for peelable wafer dicing tape ». Journal of Adhesion Science and Technology 34, no 23 (28 mai 2020) : 2499–509. http://dx.doi.org/10.1080/01694243.2020.1771974.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
20

Sun, Bingyan, Huimin Wang, Yanchao Fan, Xiaomeng Chu, Shaojie Liu, Song Zhao et Minzhong Zhao. « Fully cross-linked UV-induced peelable acrylic PSA prepared from a dual curable castor oil based urethane acrylate oligomer for wafer dicing ». Progress in Organic Coatings 163 (février 2022) : 106680. http://dx.doi.org/10.1016/j.porgcoat.2021.106680.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
21

Hao, Panpan, Ting Zhao, Lili Wang, Shaojie Liu, Erjun Tang et Xiaodong Xu. « IPN structured UV-induced peelable adhesive tape prepared by isocyanate terminated urethane oligomer crosslinked acrylic copolymer and photo-crosslinkable trifunctional acrylic monomer ». Progress in Organic Coatings 137 (décembre 2019) : 105281. http://dx.doi.org/10.1016/j.porgcoat.2019.105281.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
22

Chen, Kuan-Ting, Yi-Chun Yang, Yuan-Hsing Yi, Xiang-Ting Zheng et Hsing-Yu Tuan. « A carbon ink for use in thin, conductive, non peelable, amphiphilic, antioxidant, and large-area current collector coating with enhanced lithium ion battery performance ». Journal of Colloid and Interface Science 598 (septembre 2021) : 155–65. http://dx.doi.org/10.1016/j.jcis.2021.03.146.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
23

BOBDE, SUWARNA SURESH, et HEMRAJ M. TANK. « DESIGN, CHARACTERIZATION AND STATISTICAL OPTIMIZATION OF RAMOSETRON HYDROCHLORIDE MOUTH DISSOLVING FILM USING DESIGN OF EXPERIMENT ». International Journal of Applied Pharmaceutics, 12 février 2019, 224–30. http://dx.doi.org/10.22159/ijap.2019v11i2.30952.

Texte intégral
Résumé :
Objective: The present study aims to prepare a mouth dissolving film of ramosetron hydrochloride to provide relief to cancer patients suffering from nausea and vomiting. Methods: Mouth dissolving film of ramosetron hydrochloride were prepared and optimized using three levels two factor design. The films were prepared using the solvent casting technique. The effect of formulation variables such as the concentration of HPMC E15, and honey on disintegration time, tensile strength and drug release from the film were studied. The films were evaluated for weight, thickness, folding endurance, tensile strength, percent elongation, surface pH, disintegration time and drug release. Results: All the films were found to be transparent, non-sticky and easily peelable. The concentration of HPMC E 15 and Honey was found to have a significant effect on disintegration time and drug release of the mouth dissolving film. Formulation R1 was found to the best formulation with 104.21 % release in 9 min and disintegration time of 57 seconds. Conclusion: It can be concluded that the developed mouth dissolving film could serve as an effective, convenient alternative to prevent nausea and vomiting in cancer patients of any age group.
Styles APA, Harvard, Vancouver, ISO, etc.
24

Liu, Ziwei, Shan Chen, Ye Wan, Xin Miao, Qunchao Zhang, Tao Jiang, Cheng Zhang, Xianwu Cao et Tonghui Hao. « Efficient utilization of peach gum to prepare UV-responsive peelable pressure-sensitive adhesives for non-destructive fabrication of ultrathin electronics ». Applied Surface Science, novembre 2022, 155748. http://dx.doi.org/10.1016/j.apsusc.2022.155748.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie