Littérature scientifique sur le sujet « PDMS-based »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « PDMS-based ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "PDMS-based"
Bergeron, V., P. Cooper, C. Fischer, J. Giermanska-Kahn, D. Langevin et A. Pouchelon. « Polydimethylsiloxane (PDMS)-based antifoams ». Colloids and Surfaces A : Physicochemical and Engineering Aspects 122, no 1-3 (avril 1997) : 103–20. http://dx.doi.org/10.1016/s0927-7757(96)03774-0.
Texte intégralLopera, S., et R. D. Mansano. « Plasma-Based Surface Modification of Polydimethylsiloxane for PDMS-PDMS Molding ». ISRN Polymer Science 2012 (3 avril 2012) : 1–5. http://dx.doi.org/10.5402/2012/767151.
Texte intégralZhang, Y., F. Karasu, C. Rocco, L. G. J. van der Ven, R. A. T. M. van Benthem, X. Allonas, C. Croutxé-Barghorn, A. C. C. Esteves et G. de With. « PDMS-based self-replenishing coatings ». Polymer 107 (décembre 2016) : 249–62. http://dx.doi.org/10.1016/j.polymer.2016.11.026.
Texte intégralYou, Jae Bem, Kyowon Kang, Thanh Tinh Tran, Hongkeun Park, Wook Ryol Hwang, Ju Min Kim et Sung Gap Im. « PDMS-based turbulent microfluidic mixer ». Lab on a Chip 15, no 7 (2015) : 1727–35. http://dx.doi.org/10.1039/c5lc00070j.
Texte intégralPergal, Marija, Jelena Nestorov, Gordana Tovilovic-Kovacevic, Petar Jovancic, Lato Pezo, Dana Vasiljevic-Radovic et Jasna Djonlagic. « Surface characterization, hemo- and cytocompatibility of segmented poly(dimethylsiloxane)-based polyurethanes ». Chemical Industry 68, no 6 (2014) : 731–41. http://dx.doi.org/10.2298/hemind141103082p.
Texte intégralKwon, Dae-Hyeon, Jaebum Jeong, Yongju Lee, Jun-Kyu Park, Suwoong Lee, Jin-Hyuk Bae et Hyeok Kim. « Carbon Nano Tube-Polymer Hybrid Nanocomposite Electrodes for Porous Polydimethylsiloxane Sponge-Based Flexible Triboelectric Nanogenerators ». Journal of Nanoscience and Nanotechnology 21, no 9 (1 septembre 2021) : 4680–84. http://dx.doi.org/10.1166/jnn.2021.19297.
Texte intégralTan, Xueqiang, et Jimin Zheng. « A Novel Porous PDMS-AgNWs-PDMS (PAP)-Sponge-Based Capacitive Pressure Sensor ». Polymers 14, no 8 (7 avril 2022) : 1495. http://dx.doi.org/10.3390/polym14081495.
Texte intégralKim, Jinook, Mikyung Park, Gee Sung Chae et In-Jae Chung. « Influence of un-cured PDMS chains in stamp using PDMS-based lithography ». Applied Surface Science 254, no 16 (juin 2008) : 5266–70. http://dx.doi.org/10.1016/j.apsusc.2008.02.074.
Texte intégralŠustková, Alena, Klára Konderlová, Ester Drastíková, Stefan Sützl, Lenka Hárendarčíková et Jan Petr. « Rapid Production of PDMS Microdevices for Electrodriven Separations and Microfluidics by 3D-Printed Scaffold Removal ». Separations 8, no 5 (14 mai 2021) : 67. http://dx.doi.org/10.3390/separations8050067.
Texte intégralXu, Guang Tao, Yi Qing Gao, Feng Li, Xiao Feng Cui et Guo Wen Kuang. « Design and Fabrication of PDMS MLA Based on Digital Maskless Lithography Method ». Advanced Materials Research 1091 (février 2015) : 71–76. http://dx.doi.org/10.4028/www.scientific.net/amr.1091.71.
Texte intégralThèses sur le sujet "PDMS-based"
Vila, i. Planas Jordi. « PDMS-based opto uidic systems ». Doctoral thesis, Universitat Autònoma de Barcelona, 2014. http://hdl.handle.net/10803/284136.
Texte intégralAlong the thesis, several optics and fluidics elements are succesfully integrated in fully functional optouidic systems. Integration of these elements using soft-lithography fabrication technique and PDMS as constituent material ensures low-cost, disposable and flexible LOCs systems. Developed elements are individually characterized and LOCs are characterized and tested as (bio)chemical tools to overcome unsolved issues of the present state of the art in LOC applications. Design, optimization, fabrication and characterization of individual optical elements is outlined. Optical elements have been divided in two categories, passive and active elements. Passive elements are those which do not require an energy source to work. Firstly, the most simple elements, i.e., collimation lenses and self-alignment structures, necessary to create more complex structures. Such elements usually were published previously, but our development and optimization of elements as well as auxiliary structures, e.g., stoppers and self-alignment channels, built using a single technology with no increase of fabrication steps, provide a robust approach to create more complex structures. Air mirrors and lenses are combined to create beam splitters. The major issue of the BS is the deviation of output power between channels. This result suggests that some misalignment in the fibre position, the lens collimation or the waveguide geometry has occurred. Using developed MIMIC variations a new passive optical element are designed, fabricated and characterized. PDMS doped with three different pigments are used to create filters with stopbands along the whole visible spectrum. Finally, an active element, an integrated emitter, is redesigned using TracePro simulation software. Simulation results suggest there are dead volumes inside the emitter chamber. Then, size reduction and shape change is proposed. Integration of many of the these optical plus some fluidic elements is explained. Firstly, different connectors between modules are designed and tested. The previously redesigned integrated emitter are manufactured and characterized. Its behaviour matches with simulations results and suggest a further size reduction is not only possible but also recommendable. All the modules are fabricated from two PDMS replicas. Each module is elastic and can be assembled with other modules in any substrate, modules connections are not permanent and can be plug and unplug with no previous knowledge in microfluidics or LOC. Hence, presented modular system have enough flexibility to create LOC on demand to researchers without the background required to design and manufacture LOC systems from scratch. In order to prove it several modules are tested together in a crystal violet concentration determination. Previously reported collimation lenses are monolithically integrated in a monodisperse microdroplets generator. Two different optical configurations have been proposed in order to make possible fluorescence and absorbance measurement of droplets. Both are tested and compared to previous set up with equivalent results. In addition, proposed configurations can detect unlabelled droplets, a feature that was not possible with the previous set up, with the same precision and reliability. However, due to our collimation lenses and readout equipment, the droplet generation rate is limited to 160 drops/s. Finally, screening of droplet inner medium is experimentally proved for first time in optofluidic system. Afterwards, a compact and integrable fluidically controlled optical router (FCOR) is build using soft-lithographic techniques and made entirely of PDMS and air ensuring low-cost and robustness. Phaseguides, has been exploited to create a FCOR with a movable mirror without mobile parts. The LOC is repetitive, and has a good durability (non appreciable degradation or performance deterioration for weeks, in the whole visible spectrum). Finally, FCOR is integrated in a previously reported LOC performing parallel measurements of glucose and lactate with a single light source. After setup calibration, the FCOR allows parallel measurement of glucose and lactate showing good agreement with previous results. Validating then, the FCOR for parallel analysis.
Ozkan, Ekrem. « PDMS-based antimicrobial surfaces for healthcare applications ». Thesis, University College London (University of London), 2018. http://discovery.ucl.ac.uk/10044839/.
Texte intégralLamperti, Emanuele. « PDMS based microfluidics membrane contactors for CO2 removal applications ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/15261/.
Texte intégralSommer, Stacy Ann. « Siloxane-Polyurethane Fouling-Release Coatings Based On PDMS Macromers ». Diss., North Dakota State University, 2011. https://hdl.handle.net/10365/29313.
Texte intégralOffice of Naval Research (U.S.)
Gong, Xiuqing. « PDMS based microfluidic chips and their application in material synthesis / ». View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?NSNT%202009%20GONG.
Texte intégralSamel, Björn. « Novel Microfluidic Devices Based on a Thermally Responsive PDMS Composite ». Doctoral thesis, KTH, Mikrosystemteknik, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4470.
Texte intégralQC 20100817
Samel, Björn. « Novel microfluidic devices based on a thermally responsive PDMS composite / ». Stockholm : Kungliga Tekniska högskolan, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4470.
Texte intégralTabarizadeh, Elham. « PDMS-based membranes for dehydration of Triethylene glycol using pervaporation technology ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.
Trouver le texte intégralForster, Simon. « Surface modification of PDMS-based microfluidic devices through plasma polymerisation : production and application ». Thesis, University of Sheffield, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.531221.
Texte intégralAbraham, Berhane Teclesenbet. « Degradation and recovery of polydimethylsiloxane (PDMS) based composites used as high voltage insulators ». Thesis, Stellenbosch : Stellenbosch University, 2004. http://hdl.handle.net/10019.1/49902.
Texte intégralENGLISH ABSTRACT: Polydimethylsiloxane (PDMS) compounds are utilized in outdoor high voltage insulation due to their low weight, vandalism resistance, better anti-contamination performance and their superior hydrophobic nature. Under severe environmental conditions and over prolonged service time, however, the hydrophobic surface can gradually become hydrophilic and then recover with adequate resting period. In this study, room temperature vulcanized (RTV) PDMS samples were prepared with different formulations and then exposed to corona discharge to evaluate its effect. The influence of different additives, such as different types and amount of fillers and additionally added low molar mass silicone oils, on the hydrophobicity recovery of the material was investigated. The effects of two types of corona treatment were also evaluated. Hydrophobicity recovery of corona and UV-C aged PDMS samples was evaluated by means of static contact angle measurements. Positron annihilation spectroscopy (PAS) gave important information on the micro structural change after corona treatment of RTV PDMS as well as naturally aged high temperature vulcanized (HTV) PDMS samples. The different formulations of the RTV PDMS samples and the effect of the additives were studied with this technique. The formation of a thin, highly crosslinked inorganic silica-like (SiOx) layer was confirmed even at the early stage of degradation. It was also possible to estimate the thickness of the silica-like layer formed during corona exposure that is responsible for the loss and recovery of hydrophobicity. The surface hardness and hydrophilicity change of PDMS samples due to corona treatment were studied simultaneously with force distance measurements by atomic force microscopy (AFM). The adhesive force calculated from the pull-off force-distance curves showed that the adhesive force between the probe and the sample decreased with increasing corona treatment time, indicating hydrophobicity recovery. In addition to this, the increase in hardness after corona exposure provides indirect evidence of the formation of a silica-like layer. In all cases the hydrophilicity and the surface hardness of the PDMS samples increased directly after corona treatment and recovered with time. Two types of FTIR spectroscopy were used to analyse the surface of the polymer.
AFRIKAANSE OPSOMMINGS: Polidimetielsiloksaan (PDMS) word in buitelug hoogspanninginsulasie gebruik as gevolg van sy lae massa, weerstand teen vandalisme, verbeterde anti-kontaminasie werkverrigting en superieure hidrofobiese karakter. Die hidrofobiese oppervlakte kan egter gelydelik hidrofillies word onder uiterste omgewingsomstandighede en oor langdurige dienstyd. PDMS materiaal herstel egter nadat dit genoeg rustyd toegelaat is. Kamertemperatuur-gevulkaniseerde (KTV) PDMS met verskillende formulasies is in hierdie studie voorberei, aan korona ontlading blootgestel, geëvalueer en vergelyk. Die invloed van bymiddels soos verskillende tipes en hoeveelhede vuiler, asook addisionele lae molekulêre massa silikoonolie, op die herstel van hidrofobisiteit van die materiaal is ondersoek. Twee verskillende metodes van korona behandeling is ook geëvalueer. Die herstel van hidrofobisiteit van korona en UV-C verouderde PDMS monsters is met statiese kontakhoekmeting geëvalueer. Positronvernietigingspektroskopie (PVS) is 'n kragtige tegniek wat belangrike inligting oor die mikrostrukturele verandering van korona behandelde van KTV PDMS sowel as natuurlik-verouderde hoë temperatuur gevulkaniseerde (HTV) PDMS monsters gee. Die verskillende formulasies van die KTV PDMS monsters, sowel as die effek van die vullers, is met behulp van hierdie tegniek ondersoek. Die vorming van 'n dun, hoogskruisgebinde, anorganiese silika-agtige (SiOx) laag op die PDMS oppervlak, selfs tydens die vroeë stadium van degradasie, is bevestig. Dit was ook moontlik om die dikte van die silika-agtige laag wat gedurende die korona blootstelling gevorm het, en wat verantwoordelik is vir die verlies aan hidrofobisiteit, te bepaal. Die oppervlakhardheid en hidrofilisiteit verandering van PDMS monsters as gevolg van korona behandeling, was gelyktydig met krag-afstand metings deur middel van atoomkragmikroskopie (AKM) bestudeer. Die kleefkrag, soos bereken van aftrek kragafstandkurwes, dui daarop dat kleefkragte tussen die taster en die monster afneem met toenemende korona behandelingstyd, wat beduidend is op die herstel van hidrofobisiteit. Daarbenewens is die toename van oppervlakhardheid na korona blootstelling "n indirekte bewys van die formasie van 'n silika-agtige laag. In alle gevalle het die hidrofilisiteit en die oppervlakhardheid van die PDMS monsters toegeneem direk na afloop van korona behandeling en gevolglik herstel met tyd. Twee tipes IR spektroskopie metodes is gebruik vir die chemiese-oppervlak analises
Livres sur le sujet "PDMS-based"
Wei, Li. Dual function magnetic PDMS microsphere-based microfluidic valve and mixer. 2005.
Trouver le texte intégralChapitres de livres sur le sujet "PDMS-based"
Bonifati, Angela, Gianvito Summa, Esther Pacitti et Fady Draidi. « Query Reformulation in PDMS Based on Social Relevance ». Dans Transactions on Large-Scale Data- and Knowledge-Centered Systems XIII, 59–90. Berlin, Heidelberg : Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-45942-3_3.
Texte intégralSharma, Amit, et Poonam Agarwal. « Triboelectric-Based Kinetic Energy Harvesting Using Polydimethylsiloxane (PDMS) ». Dans Advances in Polymer Sciences and Technology, 75–81. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2568-7_8.
Texte intégralPires, Carlos Eduardo, Damires Souza, Thiago Pachêco et Ana Carolina Salgado. « A Semantic-Based Ontology Matching Process for PDMS ». Dans Lecture Notes in Computer Science, 124–35. Berlin, Heidelberg : Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03715-3_11.
Texte intégralGallo, Simon, et Hannes Bleuler. « A Flexible PDMS-Based Multimodal Pulse and Temperature Display ». Dans Lecture Notes in Electrical Engineering, 55–58. Tokyo : Springer Japan, 2015. http://dx.doi.org/10.1007/978-4-431-55690-9_10.
Texte intégralYamamoto, T., T. Nojima et T. Fujii. « Cell-Free Protein Synthesis in PDMS-Based Parallel Microreactors ». Dans Micro Total Analysis Systems 2001, 69–71. Dordrecht : Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-010-1015-3_24.
Texte intégralAmiri, Sahar, Mohammad Ali Semsarzadeh et Sanam Amiri. « Synthesis and Characterization of PDMS Based Triblock and Pentablock Copolymers ». Dans SpringerBriefs in Molecular Science, 13–24. Cham : Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09225-6_3.
Texte intégralAmiri, Sahar, Mohammad Ali Semsarzadeh et Sanam Amiri. « Polyrotaxane Based on Inclusion Complexes of OH-PDMS-OH and Br-PDMS-Br with γ-Cyclodextrin Without Utilizing Sonic Energy ». Dans SpringerBriefs in Molecular Science, 5–12. Cham : Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09225-6_2.
Texte intégralNagai, Hidenori, Masayuki Matsubara, Kenji Chayama, Joji Urakawa, Yasuhiko Shibutani, Yoshihide Tanaka, Sahori Takeda et Shinichi Wakida. « Fabrication of Electrophoretic PDMS/PDMS Lab-on-a-chip Integrated with Au Thin-Film Based Amperometric Detection for Phenolic Chemicals ». Dans Atmospheric and Biological Environmental Monitoring, 275–84. Dordrecht : Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-1-4020-9674-7_19.
Texte intégralRehman, Tariq, Ahmad’ Athif Mohd Faudzi, Dyah Ekashanti Octorina Dewi et Mohamed Sultan Mohamed Ali. « Finite Element Analysis for PDMS Based Dual Chamber Bellows Structured Pneumatic Actuator ». Dans Communications in Computer and Information Science, 392–402. Singapore : Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6463-0_34.
Texte intégralKim, Jun-Min, et Jong-Mo Seo. « Fabrication of Polydimethylsiloxane (PDMS) - Based Flexible Electrode Array for Improving Tissue Contact ». Dans IFMBE Proceedings, 341–44. Cham : Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11128-5_85.
Texte intégralActes de conférences sur le sujet "PDMS-based"
Argueta-Diaz, Victor, et Brianna Fitzpatrick. « PDMS-based microstructured biosensor ». Dans Organic Photonic Materials and Devices XXI, sous la direction de Christopher E. Tabor, François Kajzar et Toshikuni Kaino. SPIE, 2019. http://dx.doi.org/10.1117/12.2506291.
Texte intégralHenle, C., C. Hassler, F. Kohler, M. Schuettler et T. Stieglitz. « Mechanical characterization of neural electrodes based on PDMS-parylene C-PDMS sandwiched system ». Dans 2011 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE, 2011. http://dx.doi.org/10.1109/iembs.2011.6090142.
Texte intégralPires, Carlos Eduardo, Paulo Sousa, Zoubida Kedad et Ana Carolina Salgado. « Summarizing ontology-based schemas in PDMS ». Dans 2010 IEEE 26th International Conference on Data Engineering Workshops (ICDEW 2010). IEEE, 2010. http://dx.doi.org/10.1109/icdew.2010.5452706.
Texte intégralFoland, Steven, Ke Liu, Kyung-Hak Choi, Duncan MacFarlane et Jeong-Bong Lee. « A PDMS-based pressure-tunable nanograting ». Dans 2011 IEEE 11th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2011. http://dx.doi.org/10.1109/nano.2011.6144497.
Texte intégralWang, Haichuan, Peinan Mao, Hongwei Lv et Huiling Peng. « Flexible Pulse Sensor Based on PDMS/MWCNTs ». Dans 2020 3rd International Conference on Advanced Electronic Materials, Computers and Software Engineering (AEMCSE). IEEE, 2020. http://dx.doi.org/10.1109/aemcse50948.2020.00147.
Texte intégralRiedl, X., C. Bolzmacher, R. Wagner, K. Bauer et N. Schwesinger. « A novel PDMS based capacitive pressure sensor ». Dans 2010 Ninth IEEE Sensors Conference (SENSORS 2010). IEEE, 2010. http://dx.doi.org/10.1109/icsens.2010.5690709.
Texte intégralSimorangkir, Roy B. V. B., Shilun Feng, Abu Sadat Sayem, Karu P. Esselle et Yang Yang. « PDMS-Embedded Conductive Fabric : A Simple Solution for Fabricating PDMS-Based Wearable Antennas with Robust Performance ». Dans 2018 12th International Symposium on Medical Information and Communication Technology (ISMICT). IEEE, 2018. http://dx.doi.org/10.1109/ismict.2018.8573690.
Texte intégralKlammer, I., A. Buchenauer, G. Dura, W. Mokwa et U. Schnakenberg. « A novel valve for microfluidic PDMS-based systems ». Dans 2008 IEEE 21st International Conference on Micro Electro Mechanical Systems. IEEE, 2008. http://dx.doi.org/10.1109/memsys.2008.4443734.
Texte intégralZhan, Zhikun, Ping Yao, Zaili Dong, Steve Tung, Jacob Hohnbaum, Balaji Srinivasan et Wen J. Li. « Insulin detection based on a PDMS microfluidic system ». Dans 2010 IEEE 4th International Conference on Nano/Molecular Medicine and Engineering (NANOMED). IEEE, 2010. http://dx.doi.org/10.1109/nanomed.2010.5749815.
Texte intégralZong-Ming Su, Xiao-Sheng Zhang, Meng-Di Han, Xiao-Liang Cheng, Xia Jiang, Xiang-Zhi Yin et Hai-Xia Zhang. « Honeycomb-patterned PDMS membrane based on nanosphere lithography ». Dans 2015 IEEE 10th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE, 2015. http://dx.doi.org/10.1109/nems.2015.7147493.
Texte intégralRapports d'organisations sur le sujet "PDMS-based"
Maiti, A., T. H. Weisgraber et L. N. Dinh. Radiation-induced aging of PDMS Elastomer TR-55 : a summary of constitutive, mesoscale, and population-based models. Office of Scientific and Technical Information (OSTI), novembre 2016. http://dx.doi.org/10.2172/1338168.
Texte intégralConrady, Morgan, Markus Bauer, Kyoo Jo, Donald Cropek et Ryan Busby. Solid-phase microextraction (SPME) for determination of geosmin and 2-methylisoborneol in volatile emissions from soil disturbance. Engineer Research and Development Center (U.S.), octobre 2021. http://dx.doi.org/10.21079/11681/42289.
Texte intégral