Littérature scientifique sur le sujet « Paramètres procédé »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Paramètres procédé ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Paramètres procédé"
DIRRENBERGER1, P. « Méthanisation (partie 1) : principe, paramètres et polluants émis – état de l’art ». Techniques Sciences Méthodes, no 9 (21 septembre 2020) : 15–30. http://dx.doi.org/10.36904/tsm/202009015.
Texte intégralBen Amar, R., E. Ellouze, B. B. Gupta et A. M. Ayad. « Traitement d'effluents de tannerie-mégisserie par microfiltration tangentielle ». Revue des sciences de l'eau 14, no 4 (12 avril 2005) : 445–64. http://dx.doi.org/10.7202/705427ar.
Texte intégralMoletta, R. « Contrôle et conduite des digesteurs anaérobies ». Revue des sciences de l'eau 2, no 2 (12 avril 2005) : 265–93. http://dx.doi.org/10.7202/705031ar.
Texte intégralLamoudi, L., J. C. Chaumeil et K. Daoud. « Effet des paramètres du procédé de microencapsulation du piroxicam par coacervation complexe ». Annales Pharmaceutiques Françaises 73, no 1 (janvier 2015) : 37–42. http://dx.doi.org/10.1016/j.pharma.2014.05.006.
Texte intégralDROUIN, M., G. PARRAVICINI, S. NASSER et P. MOULIN. « Traitement des effluents de désulfuration des gaz d’échappement des navires de transport maritime par filtration membranaire ». Techniques Sciences Méthodes 1-2 (20 février 2023) : 27–39. http://dx.doi.org/10.36904/202301027.
Texte intégralMazzolini, Jérémy, Jean-Hugues questel et Julien Valette. « Influence du MHP dans les procédés LRI. Analyses expérimentales sur l'interaction entre les paramètres procédé et les performances du composite ». Revue des composites et des matériaux avancés 21, no 1 (avril 2011) : 43–56. http://dx.doi.org/10.3166/rcma.21.45-56.
Texte intégralHmida-Maamar, S., F. Schmidt, L. Robert, V. Velay et D. Mercier. « Identification de paramètres de comportement de membranes en polymères durant le procédé de soufflage ». Matériaux & ; Techniques 94, no 5 (2006) : 371–78. http://dx.doi.org/10.1051/mattech:2007010.
Texte intégralSmith, Jennifer, Birinder Praneet Purewal, Alison Macpherson et Ian Pike. « Paramètres d’évaluation des programmes de prévention des blessures chez les jeunes travailleurs occupant des professions à haut risque : examen de la portée de la littérature ». Promotion de la santé et prévention des maladies chroniques au Canada 38, no 5 (mai 2018) : 217–27. http://dx.doi.org/10.24095/hpcdp.38.5.01f.
Texte intégralLambert, Serge. « Compactage Horizontal Statique : retours d’expérience ». Revue Française de Géotechnique, no 162 (2020) : 3. http://dx.doi.org/10.1051/geotech/2020005.
Texte intégralEl Amrani, Abdelkader, Achour Mahrane, Mohamed Fathi Moussa et Yacine Boukennous. « Procédé d’encapsulation des modules photovoltaïques type mono-verre ». Journal of Renewable Energies 9, no 1 (30 avril 2006) : 37–42. http://dx.doi.org/10.54966/jreen.v9i1.812.
Texte intégralThèses sur le sujet "Paramètres procédé"
Monteiro, Centeno da Costa Filipe. « Procédé d’immobilisation de levures pour applications oenologiques. Etudes des paramètres du procédé. Validations experimentales ». Thesis, Toulouse, INPT, 2011. http://www.theses.fr/2011INPT0061.
Texte intégralThe study and development of yeast immobilization processes for wine fermentations started in the mid 80’s. Even though this technology could be of great benefit for the oenological sector very few process left the laboratory or pilot scale and those which arrived to industrial scale didn’t have the ambitioned success due to technical or economical constraints. The first goal of this work was to develop an industrial process for yeast immobilisation with emphasis on the most sensitive aspects which required further studies. The second objective of this work was to characterise the fermentation kinetics of immobilised yeasts cells during the production sparkling wines and during the deacidification of grape must. Whenever possible the wines produced were also characterised from a sensorial point of view. The third and last goal was to evaluate the use of immobilised yeast cells for continuous fermentation of grape must. For that we have used continuous fixed bed and fluidized bed fermenters
Monteiro, Centeno da Costa Filipe. « Procédé d’immobilisation de levures pour applications oenologiques. Etudes des paramètres du procédé. Validations experimentales ». Electronic Thesis or Diss., Toulouse, INPT, 2011. http://www.theses.fr/2011INPT0061.
Texte intégralThe study and development of yeast immobilization processes for wine fermentations started in the mid 80’s. Even though this technology could be of great benefit for the oenological sector very few process left the laboratory or pilot scale and those which arrived to industrial scale didn’t have the ambitioned success due to technical or economical constraints. The first goal of this work was to develop an industrial process for yeast immobilisation with emphasis on the most sensitive aspects which required further studies. The second objective of this work was to characterise the fermentation kinetics of immobilised yeasts cells during the production sparkling wines and during the deacidification of grape must. Whenever possible the wines produced were also characterised from a sensorial point of view. The third and last goal was to evaluate the use of immobilised yeast cells for continuous fermentation of grape must. For that we have used continuous fixed bed and fluidized bed fermenters
Tetart, Valérie. « Applications du procédé d'atomisation dans l'industrie pharmaceutique : étude de l'influence des paramètres ». Bordeaux 2, 1999. http://www.theses.fr/1999BOR2P026.
Texte intégralRiggio, Silvio. « Méthanisation par voie sèche discontinue des fumiers : optimisation des paramètres opérationnels du procédé ». Thesis, Paris Est, 2017. http://www.theses.fr/2017PESC1183/document.
Texte intégralAnaerobic Digestion (AD) is a process which allows the treatment of organic waste and the production of renewable energy. In particular, dry AD allows the treatment of solid organic substrates, offering several possibilities to the enhancement of agricultural waste such as spent livestock bedding (a mixture of straw, faeces and urine). Among the available biotechnologies in AD, leach-bed reactor (LBRs) is a promising but yet poorly known process both at scientific and industrial level.In order to develop this process, several issues have been studied: (i) the bio-physico-chemical characterization of spent animal bedding and its digestion potential in LBRs; (ii) the optimization of the start-up and the operating temperature of the digesters; (iii) the co-digestion of spent animal bedding with an easily-degradable substrate and the issues connected to the management of the volatile fatty acids (VFAs) produced.The results showed that spent animal bedding is a slowly-degradable substrate which needs a long digestion time. However, it is a substrate suitable to be treated through AD displaying high degradation and methane production rates when processed in LBRs. This substrate is, therefore, a valuable organic resource in the agricultural context.Spent animal bedding was shown to contain an active methanogenic population able to start the process efficiently, both in thermophilic and mesophilic temperature, without requiring a specific external inoculation. An economic study at industrial scale proved that this peculiarity can be used to diminish the investment costs and then promote the development of this process. Moreover, thermophilic temperature was proved to be less advantageous over mesophilic condition. In fact, despite the very close methane yield reached in both temperature range, the different biogas production rates in thermophilic conditions would lead to a reduction of the final electric energy production in this condition. Mesophilic temperature was then shown to be the best operating condition for this process.Finally, the role played by the leachate recirculation in the mobilization of the VFAs accumulating in the solid bulk was highlighted in the case of a reactor co-digesting slowly- (spent livestock bedding) and easily-degradable substrates. A strategy was even proposed to efficiently face such a problem by optimizing both the VFA extraction and consumption with the objectives of increasing the overall process efficiency.In the end, this work allowed to optimize some important parameters for the correct management of the LBRs. This technology was proved to be efficient in the treatment of spent livestock bedding, both as a sole substrate or in co-digestion with an easily-degradable substrate. This research study demonstrates that LBRs is an adapted process for the agricultural context and this technology can easily answer to the full scale issues usually encountered. This work represents a significant advance towards the comprehension and development of LBRs to treat agricultural waste and, more generally, to the development of renewable energies based on biomass
Chevrier, Turbide Guillaume. « Optimisation des paramètres de fonctionnement d’un bioréacteur dans un procédé de tri-compostage ». Mémoire, École de technologie supérieure, 2011. http://espace.etsmtl.ca/1052/1/CHEVRIER_TURBIDE_Guillaume.pdf.
Texte intégralGrardel, Bodart Martine. « Mécanosynthèse d'acier ferritique O. D. S : paramètres du procédé et microstructure du matériau ». Grenoble INPG, 1994. http://www.theses.fr/1994INPG0048.
Texte intégralDelamézière, Arnaud. « Contribution à l'optimisation des paramètres du procédé d'emboutissage des tôles minces par l'approche inverse ». Compiègne, 2002. http://www.theses.fr/2002COMP1435.
Texte intégralWeiland, Jean-Jacques. « Etude physico-chimique du traitement thermique du bois. Optimisation de paramètres du procédé de rétification ». Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2000. http://tel.archives-ouvertes.fr/tel-00820822.
Texte intégralBen, Elechi Slim. « Analyse et conception rapides de paramètres du procédé d'emboutissage pour le contrôle du retour élastique ». Compiègne, 2004. http://www.theses.fr/2004COMP1538.
Texte intégralThe inverse approach is an original method developed at UTC since 1990. Ln this study we introduce a new modification to the method called "Itnproved Inverse Approach" (lIA). This new approach has showen to be very efficient for the evaluation of stress distribution in the zone between the blank and the die wich has a great effect on the springback results. The second part of the thesis is dedicated to the fast springback simulation after the removal of tools at the end of the stamping process. A coupling of our numerical simulation between a deep drawing software code called REFORM based on the lIA, with an incremental code called REFLEX based on the Updated Lagrangian Formulation for the fast and automatic simulation of the springback. The last p. Art of our work is dedicated to the optimization of the deep drawing process parameters in order to reduce the springback after the removal of tools at the end of forming
Weiland, Jean-jacques. « Etude physico-chimique du traitement thermique du bois : Optimisation de paramètres du procédé de rétification ». Grenoble INPG, 2000. http://tel.archives-ouvertes.fr/tel-00820822.
Texte intégralChapitres de livres sur le sujet "Paramètres procédé"
PEYRE, Patrice. « Les procédés de fabrication additive métallique ». Dans La fabrication additive des alliages métalliques 1, 5–102. ISTE Group, 2022. http://dx.doi.org/10.51926/iste.9054.ch1.
Texte intégral