Littérature scientifique sur le sujet « Overhead contact line »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Overhead contact line ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Overhead contact line"
KUSUMI, Shunichi, Takahiro FUKUTANI et Kazuyoshi NEZU. « Diagnosis of Overhead Contact Line based on Contact Force ». Quarterly Report of RTRI 47, no 1 (2006) : 39–45. http://dx.doi.org/10.2219/rtriqr.47.39.
Texte intégralSmerdin, Aleksandr, Elena Butenko, Mikhail Mikhailov et Victor Philippov. « Improve hardware facilities and work algorithms of overhead contact line remote monitoring systems ». E3S Web of Conferences 363 (2022) : 01048. http://dx.doi.org/10.1051/e3sconf/202236301048.
Texte intégralSkrzyniarz, Marek, Włodzimierz Kruczek, Kamil Mike et Piotr Stypułkowski. « Development of a Model of Current Distribution in the Overhead Contact Lines for an Innovative de-Icing System ». Problemy Kolejnictwa - Railway Reports 66, no 195 (juin 2022) : 135–39. http://dx.doi.org/10.36137/1956e.
Texte intégralSugama, Yoji, Toshihide Kishi et Nobuyuki Ishioka. « 1B31 Development of an Overhead Contact Line Equipment Monitoring System(Condition Monitoring-Vehicle) ». Proceedings of International Symposium on Seed-up and Service Technology for Railway and Maglev Systems : STECH 2015 (2015) : _1B31–1_—_1B31–9_. http://dx.doi.org/10.1299/jsmestech.2015._1b31-1_.
Texte intégralBryja, Danuta, et Dawid Prokopowicz. « Discrete-continuous computational model of the coupled dynamic system : pantograph – overhead contact line ». Transportation Overview - Przeglad Komunikacyjny 2016, no 5 (1 mai 2016) : 71–83. http://dx.doi.org/10.35117/a_eng_16_05_08.
Texte intégralSun, Zhong Guo, Xiang Dong Li et Wei Dong Wang. « Measuring Model of Dynamic Contact Force ». Advanced Materials Research 503-504 (avril 2012) : 1614–18. http://dx.doi.org/10.4028/www.scientific.net/amr.503-504.1614.
Texte intégralKadiri, Karim, Anne-Cécile Roks, Tayeb Touat et Yannick Lecluse. « Combined Portal Frames for Signalling and Overhead Contact Line ». IABSE Symposium Report 99, no 15 (6 mai 2013) : 378–79. http://dx.doi.org/10.2749/222137813806501722.
Texte intégralLi, Xing Wang, et Ju Rui Yang. « Transient Responses in Continuous Co-Phase Traction Power Supply System ». Advanced Materials Research 1006-1007 (août 2014) : 955–61. http://dx.doi.org/10.4028/www.scientific.net/amr.1006-1007.955.
Texte intégralBryja, Danuta, et Adam Popiołek. « Initial validation of the method for simulating the dynamic interaction between pantograph and overhead contact line ». Transportation Overview - Przeglad Komunikacyjny 2017, no 6 (1 juin 2017) : 34–45. http://dx.doi.org/10.35117/a_eng_17_06_04.
Texte intégralSmerdin, Aleksandr, Gleb Ermachkov, Oleg Sidorov et Daniil Petin. « The use of predictive analysis algorithms and methods for the overhead contact line operation mode selection ». E3S Web of Conferences 363 (2022) : 01049. http://dx.doi.org/10.1051/e3sconf/202236301049.
Texte intégralThèses sur le sujet "Overhead contact line"
Li, Qi. « Acoustic noise emitted from overhead line conductors ». Thesis, University of Manchester, 2013. https://www.research.manchester.ac.uk/portal/en/theses/acoustic-noise-emitted-from-overhead-line-conductors(90a5c23c-a7fc-4230-bbab-16b8737b2af2).html.
Texte intégralNoack, Thomas. « Optimierung der Messverfahren zur Erfassung der Interaktion von Stromabnehmer und Oberleitung ». Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-209699.
Texte intégralHildmann, Christian. « Zum elektrischen Kontakt- und Langzeitverhalten von Pressverbindungen mit konventionellen und Hochtemperatur-Leiterseilen mit geringem Durchhang ». Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-222889.
Texte intégralIn Germany and in Europe it is due to the “Energiewende” necessary to transmit more electrical ener-gy with existing overhead transmission lines. One possible technical solution to reach this aim is the use of high temperature low sag conductors (HTLS-conductors). Compared to the common Aluminium Conductor Steel Reinforced (ACSR), HTLS-conductors have higher rated currents and rated tempera-tures. Thus the electrical connections for HTLS-conductors are stressed to higher temperatures too. These components are most important for the safe and reliable operation of an overhead transmission line. Besides other connection technologies, hexagonal compression connections with ordinary transmis-sion line conductors have proven themselves since decades. From the literature, mostly empirical stud-ies with electrical tests for compression connections are known. The electrical contact behaviour, i.e. the quality of the electrical contact after assembly, of these connections has been investigated insuffi-ciently. This work presents and enhances an electrical model of compression connections, so that the electrical contact behaviour can be determined more accurate. Based on this, principal considerations on the current distribution in the compression connection and its influence on the connection re-sistance are presented. As a result from the theoretical and the experimental work, recommendations for the design of hexagonal compression connections for transmission line conductors were devel-oped. Furthermore it is known from the functional principle of compression type connections, that the elec-trical contact behaviour can be influenced from their form fit, force fit and cold welding. In particular the forces in compression connections have been calculated up to now by approximation. The known ana-lytical calculations simplify the geometry and material behaviour and do not consider the correct me-chanical load during assembly. For these reasons the joining process of hexagonal compression con-nections with stranded overhead transmission line conductors was calculated with the finite element method. The compression forces and the residual contact forces were determined for all contacts be-tween barrel and conductor as well as between the wires of the conductor. It was shown, that high compression and residual contact forces are the main cause of good electrical contact behaviour. The physical relations are discussed. The electrical long-term behaviour was furthermore investigated in experiments. The results confirm the influence of the residual contact force on the long-term behaviour qualitatively. Those compression connections, which had only small residual contact forces, were less stable in the long-term tests
Bonora, Giulia. « Analysis of the impact of stationary energy storage systems in trolleybus grids using Simulink-based modelling ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2022. http://amslaurea.unibo.it/25832/.
Texte intégralMallangi, Siva Sai Reddy. « Low-Power Policies Based on DVFS for the MUSEIC v2 System-on-Chip ». Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-229443.
Texte intégralNuförtiden så har multifunktionella bärbara hälsoenheter fått en betydande roll. Dessa enheter drivs vanligtvis av batterier och är därför begränsade av batteritiden (från ett par timmar till ett par veckor beroende på tillämpningen). På senaste tiden har det framkommit att dessa enheter som används vid en fast spänning och frekvens kan användas vid flera spänningar och frekvenser. Genom att byta till lägre spänning och frekvens på grund av effektbehov så kan enheterna få enorma fördelar när det kommer till energibesparing. Dynamisk skalning av spänning och frekvens-tekniker (såkallad Dynamic Voltage and Frequency Scaling, DVFS) har visat sig vara användbara i detta sammanhang för en effektiv avvägning mellan energi och beteende. Hos Imec så använder sig bärbara enheter av den internt utvecklade MUSEIC v2 (Multi Sensor Integrated circuit version 2.0). Systemet är optimerat för effektiv och korrekt insamling, bearbetning och överföring av data från flera (hälso) sensorer. MUSEIC v2 har begränsad möjlighet att styra spänningen och frekvensen dynamiskt. I detta examensarbete undersöker vi hur traditionella DVFS-tekniker kan appliceras på MUSEIC v2. Experiment utfördes för att ta reda på de optimala effektlägena och för att effektivt kunna styra och även skala upp matningsspänningen och frekvensen. Eftersom att ”overhead” skapades vid växling av spänning och frekvens gjordes också en övergångsanalys. Realtidsoch icke-realtidskalkyler genomfördes baserat på dessa tekniker och resultaten sammanställdes och analyserades. I denna process granskades flera toppmoderna schemaläggningsalgoritmer och skalningstekniker för att hitta en lämplig teknik. Genom att använda vår föreslagna skalningsteknikimplementering har vi uppnått 86,95% effektreduktion i jämförelse med det konventionella sättet att MUSEIC v2-chipets processor arbetar med en fast spänning och frekvens. Tekniker som inkluderar lätt sömn och djupt sömnläge studerades och implementerades, vilket testade systemets förmåga att tillgodose DPM-tekniker (Dynamic Power Management) som kan uppnå ännu större fördelar. En ny metod för att genomföra den djupa sömnmekanismen föreslogs också och enligt erhållna resultat så kan den ge upp till 71,54% lägre energiförbrukning jämfört med det traditionella sättet att implementera djupt sömnläge.
Hildmann, Christian. « Zum elektrischen Kontakt- und Langzeitverhalten von Pressverbindungen mit konventionellen und Hochtemperatur-Leiterseilen mit geringem Durchhang ». Doctoral thesis, 2016. https://tud.qucosa.de/id/qucosa%3A30263.
Texte intégralIn Germany and in Europe it is due to the “Energiewende” necessary to transmit more electrical ener-gy with existing overhead transmission lines. One possible technical solution to reach this aim is the use of high temperature low sag conductors (HTLS-conductors). Compared to the common Aluminium Conductor Steel Reinforced (ACSR), HTLS-conductors have higher rated currents and rated tempera-tures. Thus the electrical connections for HTLS-conductors are stressed to higher temperatures too. These components are most important for the safe and reliable operation of an overhead transmission line. Besides other connection technologies, hexagonal compression connections with ordinary transmis-sion line conductors have proven themselves since decades. From the literature, mostly empirical stud-ies with electrical tests for compression connections are known. The electrical contact behaviour, i.e. the quality of the electrical contact after assembly, of these connections has been investigated insuffi-ciently. This work presents and enhances an electrical model of compression connections, so that the electrical contact behaviour can be determined more accurate. Based on this, principal considerations on the current distribution in the compression connection and its influence on the connection re-sistance are presented. As a result from the theoretical and the experimental work, recommendations for the design of hexagonal compression connections for transmission line conductors were devel-oped. Furthermore it is known from the functional principle of compression type connections, that the elec-trical contact behaviour can be influenced from their form fit, force fit and cold welding. In particular the forces in compression connections have been calculated up to now by approximation. The known ana-lytical calculations simplify the geometry and material behaviour and do not consider the correct me-chanical load during assembly. For these reasons the joining process of hexagonal compression con-nections with stranded overhead transmission line conductors was calculated with the finite element method. The compression forces and the residual contact forces were determined for all contacts be-tween barrel and conductor as well as between the wires of the conductor. It was shown, that high compression and residual contact forces are the main cause of good electrical contact behaviour. The physical relations are discussed. The electrical long-term behaviour was furthermore investigated in experiments. The results confirm the influence of the residual contact force on the long-term behaviour qualitatively. Those compression connections, which had only small residual contact forces, were less stable in the long-term tests.
Hinton, Scott. « An exploratory study in the construction industry on the efforts being taken to minimize contact with overhead power lines ». Thesis, 1993. http://hdl.handle.net/10945/24165.
Texte intégralLivres sur le sujet "Overhead contact line"
Mair, Clemens. Non-contact measurements of railway overhead line geometries. Birmingham : University of Birmingham, 2002.
Trouver le texte intégralKulpa, John S. Reducing the visual impact of overhead contact systems. Washington, D.C : National Academy Press, 1995.
Trouver le texte intégralHinton, Scott. An exploratory study in the construction industry on the efforts being taken to minimize contact with overhead power lines. Springfield, Va : Available from the National Technical Information Service, 1993.
Trouver le texte intégralJohansen, Bruce, et Adebowale Akande, dir. Nationalism : Past as Prologue. Nova Science Publishers, Inc., 2021. http://dx.doi.org/10.52305/aief3847.
Texte intégralChapitres de livres sur le sujet "Overhead contact line"
Głowacz, Michał, Marek Kaniewski et Artur Rojek. « Overhead contact line systems for high-speed rails ». Dans High-Speed Rail in Poland, 279–300. Leiden, The Netherlands ; Boca Raton : CRC Press/Balkema, [2018] : CRC Press, 2018. http://dx.doi.org/10.1201/9781351003308-11.
Texte intégralXu, Jianfeng, Yuan Zhong et Shibin Gao. « Monte Carlo Simulation Method Used in Reliability Evaluation of Railway Overhead Contact Line ». Dans Lecture Notes in Electrical Engineering, 619–28. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-7989-4_63.
Texte intégralRoy, Riya, Abdullah Al Jubayer, Kazi Sadman Sakib, Najmus Sakib, Avijit Saha, M. Rezwan Khan et M. Shahedul Alam. « Policy Options While Increasing Share of Renewable Energy : Technology Choices for Peaking Power in the Context of Bangladesh ». Dans Energiepolitik und Klimaschutz. Energy Policy and Climate Protection, 67–86. Wiesbaden : Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-38215-5_4.
Texte intégral« Design of Temperature Monitoring System for Overhead Contact Line Based on ZigBee and GPRS ». Dans International Conference on Computer Technology and Development, 3rd (ICCTD 2011), 911–15. ASME Press, 2011. http://dx.doi.org/10.1115/1.859919.paper149.
Texte intégralTheune, N., T. Bosselmann, J. Kaiser, M. Willsch, H. Hertsch et R. Puschmann. « Online temperature monitoring of overhead contact line at the new German high-speed rail line Cologne Rhine/Main ». Dans Power Supply, Energy Management and Catenary Problems, 87–94. WIT Press, 2010. http://dx.doi.org/10.2495/978-1-84564-498-7/09.
Texte intégralBaccari, Silvio, Giulio Cammeo, Christian Dufour, Luigi Iannelli, Vincenzo Mungiguerra, Mario Porzio, Gabriella Reale et Francesco Vasca. « Real-Time Hardware-in-the-Loop in Railway ». Dans Railway Safety, Reliability, and Security, 221–48. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-4666-1643-1.ch010.
Texte intégralFragoudakis, Christodoulos, et Markos Karampatsis. « Visualizing Content for Computational Geometry Courses ». Dans Cases on Inquiry through Instructional Technology in Math and Science, 581–604. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-4666-0068-3.ch021.
Texte intégralMitrea, Mihai, et Françoise Prêteux. « From Watermarking to In-Band Enrichment ». Dans Advanced Techniques in Multimedia Watermarking, 111–26. IGI Global, 2010. http://dx.doi.org/10.4018/978-1-61520-903-3.ch005.
Texte intégralAndrews, Chris. « Lightning and electrical injuries ». Dans Oxford Textbook of Medicine, sous la direction de Jon G. Ayres, 1696–700. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198746690.003.0208.
Texte intégraldeBuys, William. « High Blue : The Great Downshift of Dryness ». Dans A Great Aridness. Oxford University Press, 2011. http://dx.doi.org/10.1093/oso/9780199778928.003.0006.
Texte intégralActes de conférences sur le sujet "Overhead contact line"
Harada, S., et S. Kusumi. « Monitoring of overhead contact line based on contact force ». Dans IET International Conference on Railway Condition Monitoring. IEE, 2006. http://dx.doi.org/10.1049/ic:20060067.
Texte intégralBian, Zhi-Wen, Wen-Bing Xie, Zhi-Wen Zhang, Jia-Li Lie, Lie Wang, Hao Liu et Guo-Ming Ma. « Non-contact on-line overvoltage measurement system for overhead transmission line ». Dans 2022 IEEE International Conference on High Voltage Engineering and Applications (ICHVE). IEEE, 2022. http://dx.doi.org/10.1109/ichve53725.2022.9961663.
Texte intégralMatsumura, Itaru, Kazuyoshi Nezu, Takuro Kawabata et Yusuke Watabe. « Development of contactless measurement device for overhead contact line ». Dans 6th International Conference on Road and Rail Infrastructure. University of Zagreb Faculty of Civil Engineering, 2021. http://dx.doi.org/10.5592/co/cetra.2020.1011.
Texte intégralNakayama, Masahiro, Yukio Furuyama, Haruki Aoyagi, Hiroshi Katou, Takehiko Nakamura, Yuuki Iino, Takeshi Yamazaki, Hitoshi Hayashiya et Dan Tsuchizawa. « Revision of lightning protection map for overhead contact line system ». Dans 2016 33rd International Conference on Lightning Protection (ICLP). IEEE, 2016. http://dx.doi.org/10.1109/iclp.2016.7791510.
Texte intégralLi, Fubao, Zhongke Li, Qin Li et Dexi Wang. « Calibration of Three CCD Camera Overhead Contact Line Measuring System ». Dans 2010 International Conference on Intelligent Computation Technology and Automation (ICICTA). IEEE, 2010. http://dx.doi.org/10.1109/icicta.2010.17.
Texte intégralChang Jinbing, Wang Guogang et Liu Huijun. « Mechanisms analysis and countermeasure of electrical contact overheating of overhead line ». Dans 2014 International Conference on Power System Technology (POWERCON). IEEE, 2014. http://dx.doi.org/10.1109/powercon.2014.6993786.
Texte intégralJung, Sung Pil, Tae Won Park et Jin Hee Lee. « Numerical Analysis of the Dynamic Interaction Between Pantograph and Overhead Contact Line Using FEM ». Dans 2011 Joint Rail Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/jrc2011-56038.
Texte intégralLee, Jin-Hee, Tae-Won Park et Sung-Pil Jung. « Development of the Analysis Model for Overhead Contact Line and Pantograph by EN Standard ». Dans 2011 Joint Rail Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/jrc2011-56039.
Texte intégralGregori, Santiago, Jaime Gil, Manuel Tur, Ana Pedrosa et Fco Javier Fuenmayor. « Simulation of the contact wire wear evolution in high speed overhead contact lines ». Dans VI ECCOMAS Young Investigators Conference. València : Editorial Universitat Politècnica de València, 2021. http://dx.doi.org/10.4995/yic2021.2021.12566.
Texte intégralXie, Jiangjian, Yi Wang et Tingting Lu. « Overhead Contact System On-Line Monitor Technology Based on Wireless Sensor Network ». Dans 2011 Asia-Pacific Power and Energy Engineering Conference (APPEEC). IEEE, 2011. http://dx.doi.org/10.1109/appeec.2011.5747737.
Texte intégralRapports d'organisations sur le sujet "Overhead contact line"
Two masons electrocuted after contact with an overhead power line, Kentucky. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, février 2015. http://dx.doi.org/10.26616/nioshsface13ky010.
Texte intégralInsulation installer dies when his aluminum ladder makes contact with overhead power line. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control, National Institute for Occupational Safety and Health, février 1991. http://dx.doi.org/10.26616/nioshsface90nj013.
Texte intégralTree trimming/removal worker electrocuted after making indirect contact with a 8000 volt overhead power line. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control, National Institute for Occupational Safety and Health, septembre 1992. http://dx.doi.org/10.26616/nioshsface92mn012.
Texte intégralTwo equipment operators electrocuted when irrigation pipe made contact with an overhead electrical line in California. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, novembre 1994. http://dx.doi.org/10.26616/nioshsface94ca001.
Texte intégralA 29 year old truck driver/delivery man was electrocuted when the aluminum pole brush he was holding came in contact with a 14,000 volt overhead transmission line. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, mars 1994. http://dx.doi.org/10.26616/nioshsface92wi089.
Texte intégralConstruction worker electrocuted when crane cable contacts an overhead power line. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, décembre 1992. http://dx.doi.org/10.26616/nioshsface92nj029.
Texte intégralFarm worker electrocuted when aluminum grain tube contacts overhead power line. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, janvier 1995. http://dx.doi.org/10.26616/nioshsface94wi305.
Texte intégralHispanic laborer electrocuted after boom truck contacts overhead power line - North Carolina. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, juin 2005. http://dx.doi.org/10.26616/nioshface200502.
Texte intégralMachine operator electrocuted when crane contacts overhead power line, December 5, 1988. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control, National Institute for Occupational Safety and Health, février 1989. http://dx.doi.org/10.26616/nioshface8910.
Texte intégralConcrete pump truck operator electrocuted when boom contacts overhead power Line - Alaska. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, juin 1997. http://dx.doi.org/10.26616/nioshsface97ak013.
Texte intégral