Littérature scientifique sur le sujet « Outil statique »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Outil statique ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Outil statique"
Parent, Geneviève, Jean-Pierre Guay et Raymond A. Knight. « Évaluation de la validité prédictive de neuf instruments chez les agresseurs sexuels adultes ». Criminologie 42, no 2 (19 novembre 2009) : 223–47. http://dx.doi.org/10.7202/038606ar.
Texte intégralKirman, Alan. « La pensée évolutionniste dans la théorie économique néoclassique ». Philosophiques 25, no 2 (8 août 2007) : 219–37. http://dx.doi.org/10.7202/027488ar.
Texte intégralYao, Marcel Konan, Djedro Clément Akmel, Kouamé Lazare Akpetou, Albert Trokourey, Kouassi Benjamin Yao et Nogbou Emmanuel Assidjo. « Modélisation de l'évolution spatiotemporelle du phosphore minéral dans une baie lagunaire hypereutrophe tropicale : la baie lagunaire de Tiagba (Côte d'Ivoire) ». Revue des sciences de l’eau 30, no 3 (28 mars 2018) : 247–58. http://dx.doi.org/10.7202/1044250ar.
Texte intégralBoudour, Mohamed, et Abdelhafid Hellal. « Développement d'un outil rapide d'évaluation de la sécurité statique des réseaux électriques ». Revue internationale de génie électrique 7, no 5-6 (30 décembre 2004) : 543–61. http://dx.doi.org/10.3166/rige.7.543-561.
Texte intégralDÜPPE, Till. « L’histoire du concept d’équilibre en sciences économiques ». L'Actualité économique 92, no 3 (30 mai 2017) : 581–94. http://dx.doi.org/10.7202/1040002ar.
Texte intégralBrouillette-Alarie, Sébastien, Jean Proulx et Massil Benbouriche. « Mieux saisir les outils actuariels : une analyse factorielle de la Statique-99R ». Criminologie 46, no 1 (30 avril 2013) : 199–219. http://dx.doi.org/10.7202/1015299ar.
Texte intégralMAKOSSO, Béthuel. « Efficacité et efficience statique et dynamique dans la régulation des télécommunications ». L'Actualité économique 92, no 4 (12 juillet 2017) : 733–52. http://dx.doi.org/10.7202/1040504ar.
Texte intégralLussier, Patrick. « Trajectoires criminelles et récidive des délinquants sexuels adultes : l’hypothèse « statique » revue et corrigée ». Criminologie 43, no 2 (4 avril 2011) : 269–302. http://dx.doi.org/10.7202/1001778ar.
Texte intégralBlanchon, David, et Jean-Paul Bravard. « La stabilité des formes fluviales de l’Orange, entre variabilité naturelle et impacts des grands barrages (secteur Boegoeberg-Augrabies, Afrique du Sud) ». Géographie physique et Quaternaire 61, no 1 (26 mars 2009) : 21–37. http://dx.doi.org/10.7202/029568ar.
Texte intégralHaman, Didier Jean B., Fyetoh W. Fantong, G. Ombolo Auguste Ewodo Mboudou et Gabriel Messi. « Approche décisionnelle géospatiale et multicritère dans l’identification des zones potentielles de recharge des eaux souterraines : cas du bassin versant du Mayo Bocki au Nord Cameroun ». Journal of the Cameroon Academy of Sciences 18, no 1 (16 août 2022) : 339–56. http://dx.doi.org/10.4314/jcas.v18i1.5.
Texte intégralThèses sur le sujet "Outil statique"
PARMENTELAT, THIERRY. « Metropol : un outil de mesure statique sur les arbres centaur ». Paris, CNAM, 1991. http://www.theses.fr/1991CNAM0128.
Texte intégralMerdassi, Asma. « Outil d'aide à la modélisation moyenne de convertisseurs statiques pour la simulation de systèmes mécatroniques ». Phd thesis, Grenoble INPG, 2009. http://tel.archives-ouvertes.fr/tel-00434953.
Texte intégralMerdassi, Asma. « Outil d'aide à la modélisation moyenne de convertisseurs statiques pour la simulation de systèmes mécatroniques ». Phd thesis, Grenoble INPG, 2009. http://www.theses.fr/2009INPG0099.
Texte intégralPower electronics models of static converters are useful in a huge set of applications. They are used for component sizing, as well for control adjustment, control or behaviour simulation. In this context, average models are a good compromise between complexity, computation time and acceptable accuracy for system simulation. However, they may be difficult to create, especially when the structures of the studied converters are complex and their control involves uncontrolled commutations. Our work focuses on the way to carry out automatically such a process by using a symbolic treatment. We propose an automatic building approach of both exact and average models by using a software tool. This one is named AMG (for Average Model Generator) and has been developed in our works. This tool is dedicated to the average modelling of power electronics converters. It deals with some discontinuous conduction modes and continuous conduction modes. The models are created from the description of the structure of the static converter (i. E. Its netlist), its operating mode and its control. In the architecture of AMG, three steps are important: the analysis of the circuit, the extraction of the state matrixes for each configuration of the static converter and finally the building of the global state model. The generated models are generated under their symbolic forma and in Modelica and VHDL-AMS languages; so this allows their simulation in several software. The modelling of several static converters is presented to show the possibilities of AMG
Dau, Anh Tuan. « Elaboration d’un outil numérique reliant les échelles micro/méso d’un composite thermoplastique sensible à l’humidité et à la température en quasi-statique ». Thesis, Ecole centrale de Nantes, 2019. http://www.theses.fr/2019ECDN0004/document.
Texte intégralThe objective of this PhD thesis is to create a methodology to simulate the behavior of a 2x2 glass/PA66 twill composite using homogenization. To achieve this goal, we use two steps: first one is dedicated to represent the yarn behavior and the second one to represent the behavior of the composite RVE. An experimental characterization campaign about the PA66 has been done in order to quantify the influence of both hygrometry and temperature on the behavior of the matrix in quasi-static. Then, we formulated, implemented and validated an isotropic elasto-plastic damageable constitutive law. It was used to identify by homogenization the behavior of the yarns by assuming a perfect bonding of the fibers and the matrix as well as a water homogeneity inside the yarn. Thanks to the identified behavior of the yarns and by formulating a compatible constitutive law (anisotropic elasto-plastic damageable), we have determined for the woven composite on one hand the elastic properties and in the other hand the longitudinal/transversal and shear nonlinear behaviors. The comparisons of the numerical and experimental results offer satisfactory results. It provides good outlook in short-term in regard of structures design which include this type of woven composite materials. The main advantage of the methodology is to decrease the number of required experimental tests. Some outlook dedicated to crash studies are finally suggested
Enjalbert, Gérard. « Développement d'un outil de conception assistée par ordinateur : le logiciel circuit ». Grenoble INPG, 1989. http://www.theses.fr/1989INPG0095.
Texte intégralOikonomopoulou, Apostolia. « APPROCHES NUMERIQUES POUR L'ETUDE DU COMPORTEMENT DES STRUCTURES MAÇONNEES ANCIENNES : Un outil basé sur le Calcul à la Rupture et la visualisation graphique ». Phd thesis, Université Paris-Est, 2009. http://tel.archives-ouvertes.fr/tel-00493588.
Texte intégralAl-Kassar, Feras. « Testability Tarpits - Navigating the Challenges of Static Tools in Web Applications ». Electronic Thesis or Diss., Sorbonne université, 2023. http://www.theses.fr/2023SORUS675.
Texte intégralThe goal of this thesis was to evaluate the effectiveness of a combination of commercial and open source security scanners. Through experimentation, we identified various code patterns that hinder the ability of state-of-the-art tools to analyze projects. By detecting these patterns during the software development lifecycle, our approach can offer valuable feedback to developers regarding the testability of their code. Additionally, it enables them to more accurately evaluate the residual risk that their code might still contain vulnerabilities, even if static analyzers report no findings. Our approach also suggests alternative methods to transform the code and enhance its testability for SAST
Gauvin, Laetitia. « Modélisation de systèmes socio-économiques à l'aide des outils de physique statique ». Paris 6, 2010. http://www.theses.fr/2010PA066425.
Texte intégralEcorchard, Gaël. « Amélioration de la précision statique des machines-outils à cinématique parallèle redondante ». Rennes, INSA, 2009. http://www.theses.fr/2009ISAR0022.
Texte intégralRedundant parallel kinematic machines are parallel mechanisms to which one or more kinematic branch is added in order to improve their mechanical properties. New calibration methods are developed in this thesis in order to deal with the particularities related to the actuation redundancy. First, calibration methods using geometrical models are tested. Geometrical calibration methods, however, do not take into account the elastic deformations due to the internal constraints related to the redundancy. Modeling methods are then developed that take into account the geometry of the mechanism as well as the stiffness of its elements to improve the accuracy of the calibration. With such modeling methods, it is possible to determine the tool-center-point position for redundantly actuated parallel mechanisms from geometrical and stiffness parameters and given positions for all actuators
Metin, Hakan. « Exploitation des symétries dynamiques pour la résolution des problèmes SAT ». Electronic Thesis or Diss., Sorbonne université, 2019. http://www.theses.fr/2019SORUS552.
Texte intégralBoolean satisfiability (SAT) solves the problem of finding a solution to a propositional Boolean formula. This NP-complete problem can model a wide variety of industrial and academic problems covering planning, formal verification, logic optimization... Many systems in practice exhibit symmetries, that can allow to reason on a quotient abstraction of the search space that can be exponentially smaller than the full search space in favorable cases. In this thesis, we explore how to exploit symmetry to improve the performance of SAT solvers. Existing approaches to exploit symmetries in SAT solving, consist in computing the symmetries of the problem then generating so-called static "symmetry breaking predicates" (sbps) that are added to the problem, forcing the solver to adopt only one representative for each equivalence class. The problem with this approach is that the number of additional constraints can be larger than the original system, and may overload the solver. The first contribution of this thesis called CDCL[sym] is a novel lightweight and dynamic algorithm, that only introduces these additional sbps opportunistically as the solver progresses. A second approach to exploit symmetries consists in so-called dynamic symmetry breaking that is concerned with symmetric propagation of the deductions of the solver when possible. This approach solves some models that static symmetry breaking cannot solve, and vice-versa. In our second contribution of this thesis, we combine this strategy with the previous approach, enabling for the first time on the fly propagation of symmetric deductions while still gaining the benefits of CDCL[sym]
Actes de conférences sur le sujet "Outil statique"
Baranes, M., et T. Fortin. « Planification et chirurgie guidée - Avis d’experts : Apports des nouvelles technologies en implantologie : de la planification à la réalisation de la prothèse provisoire immédiate ». Dans 66ème Congrès de la SFCO. Les Ulis, France : EDP Sciences, 2020. http://dx.doi.org/10.1051/sfco/20206601011.
Texte intégralRapports d'organisations sur le sujet "Outil statique"
Gruson-Daniel, Célya, et Maya Anderson-González. Étude exploratoire sur la « recherche sur la recherche » : acteurs et approches. Ministère de l'enseignement supérieur et de la recherche, novembre 2021. http://dx.doi.org/10.52949/24.
Texte intégral