Littérature scientifique sur le sujet « OPTIM –TOOL »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « OPTIM –TOOL ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "OPTIM –TOOL"
Astorino, Annabella, Massimo Di Francesco, Manlio Gaudioso, Enrico Gorgone et Benedetto Manca. « Polyhedral separation via difference of convex (DC) programming ». Soft Computing 25, no 19 (7 avril 2021) : 12605–13. http://dx.doi.org/10.1007/s00500-021-05758-6.
Texte intégralHeidarkhani, Shapour, et Ghasem Alizadeh Afrouzi. « SOME MULTIPLICITY RESULTS TO THE EXISTENCE OF THREE SOLUTIONS FOR A DIRICHLET BOUNDARY VALUE PROBLEM INVOLVING THE P-LAPLACIAN ». Mathematical Modelling and Analysis 16, no 3 (24 août 2011) : 390–400. http://dx.doi.org/10.3846/13926292.2011.601770.
Texte intégralAtlihan, Ö. G., T. Yurdakadim et E. Taş. « A new approach to the approximation by positive linear operators in weighted spaces ». Ukrains’kyi Matematychnyi Zhurnal 74, no 11 (26 décembre 2022) : 1447–53. http://dx.doi.org/10.37863/umzh.v74i11.6427.
Texte intégralKutuniva, Kari, Jussi A. Karjalainen et Kari Mäntyjärvi. « Effect of Convex Sheared Punch Geometry on Cutting Force of Ultra-High-Strength Steel ». Key Engineering Materials 504-506 (février 2012) : 1359–64. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.1359.
Texte intégralKesti, Vili, A. Kaijalainen, A. Väisänen, A. Järvenpää, A. Määttä, A. M. Arola, K. Mäntyjärvi et R. Ruoppa. « Bendability and Microstructure of Direct Quenched Optim® 960QC ». Materials Science Forum 783-786 (mai 2014) : 818–24. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.818.
Texte intégralLaitinen, Risto O., David A. Porter, L. Pentti Karjalainen, Pasi Leiviskä et Jukka Kömi. « Physical Simulation for Evaluating Heat-Affected Zone Toughness of High and Ultra-High Strength Steels ». Materials Science Forum 762 (juillet 2013) : 711–16. http://dx.doi.org/10.4028/www.scientific.net/msf.762.711.
Texte intégralKampai, Genta, et Harmadi Harmadi. « Rancang Bangun Alat Pendeteksi Kelebihan Beban Kendaraan Menggunakan Sensor Serat Optik dan Transceiver nRF24L01+ ». Jurnal Fisika Unand 9, no 1 (11 février 2020) : 1–8. http://dx.doi.org/10.25077/jfu.9.1.1-8.2020.
Texte intégral., Widodo, et Nur Hidayat. « Design And Development Of Automatic Fiber Optic Cable Roller Using Nodemcu Esp 8266 Module ». BEST : Journal of Applied Electrical, Science, & ; Technology 4, no 1 (22 mars 2022) : 27–32. http://dx.doi.org/10.36456/best.vol4.no1.5442.
Texte intégralHarvey, Bill. « Digital tools : Dispensing with reality ». Optician 2016, no 3 (mars 2016) : 139773–1. http://dx.doi.org/10.12968/opti.2016.3.139773.
Texte intégralZhang, Yuan Liang, Zhi Min Zhou et Xu Zhang. « Compensation Control of Cutting Tool Position in Machining Non-Axisymmetric Optic Mirror Surface ». Materials Science Forum 505-507 (janvier 2006) : 181–86. http://dx.doi.org/10.4028/www.scientific.net/msf.505-507.181.
Texte intégralThèses sur le sujet "OPTIM –TOOL"
Lu, Cheng-Kai. « Retinal imaging tool for assessment of the parapapillary atrophy and the optic disc ». Thesis, University of Edinburgh, 2012. http://hdl.handle.net/1842/9903.
Texte intégralBola, Sampol Raúl. « Development of optical tools for biological applications based on acousto-optic technology ». Doctoral thesis, Universitat de Barcelona, 2021. http://hdl.handle.net/10803/672264.
Texte intégralPer poder garantir l’avanç de les ciències de la vida, amb la gran repercussió a la salut mundial que això comporta, és important anar millorant les eines amb les quals els científics (especialment els biòlegs) desenvolupen els experiments, podent així millorar la quantitat i el volum de les dades extretes. Amb noves eines, els investigadors poden desenvolupar i dissenyar nous experiments que proporcionin informació rellevant sobre l’estudi i la comprensió de molts processos cel·lulars i malalties. La tesi tracta sobre el desenvolupament de dos sistemes òptics amb gran aplicació en el camp de la biologia, ambdues basades en un element modulador de llum comú, els deflectors acusto-òptics (AODs). El AODs són dispositius totalment analògics, on s’utilitzen ones acústiques per poder modular i deflectar un làser amb una gran precisió i velocitat. A la primera part, s’explica el desenvolupament d’un sistema d’atrapament òptic i mesura de força. El sistema permet atrapar i manipular, de manera estable, múltiples objectes, així com realitzar oscil·lacions controlades. Al mateix temps, el sistema és totalment compatible amb mesura de forces per canvis de moment. Tot això permet paral·lelitzar experiments a l’interior cel·lular de manera totalment invasiva, oferint informació sobre les propietats mecàniques de diverses estructures biològiques. A la segona part, es presenta una nova forma d’entendre i utilitzar aquests dispositius: l’holografia acusto-òptica. Mitjançant la generació de senyals acústiques complexes, els AODs permeten projectar patrons de llum arbitraris, més enllà del seu ús principal com a deflectors làser. Això porta al desenvolupament d’un nou microscopi confocal, totalment programable i sense elements mecànics o mòbils. El microscopi permet projectar una infinitat de patrons de llum estructurada, per tal d’obtenir reconstruccions d’alta qualitat a centenars d’imatges per segon. Aquesta nova plataforma de microscòpia d’estat sòlid, permet investigar i implementar una infinitat de maneres d’imatge, per adaptar-se a les necessitats de cada experiment i / o mostra.
Williams, Wesley Harlan. « Tool design for and process optimization of an automated workstation for the manufacture of fiber optic gyroscopes ». Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9879.
Texte intégralQuaglia, Casal Luciano. « Developing a Combinatorial Synthesis Database Tool ». Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-374858.
Texte intégralWigdahl, Jeffrey. « Retinal Vascular Measurement Tools for Diagnostic Feature Extraction ». Doctoral thesis, Università degli studi di Padova, 2017. http://hdl.handle.net/11577/3423246.
Texte intégralI contributi di questo lavoro sono per lo sviluppo di nuovi e lo stato degli algoritmi d'arte per l'analisi di immagini tra cui il rilevamento della retina ottica del disco, la stima tortuosità, e anomalia rilevamento cross-over. La retina è una delle poche zone del corpo umano che vasi sanguigni possono essere visualizzate in maniera non invasiva. imaging della retina è diventato uno standard nell'ufficio del oculista Poiché si tratta di un modo semplice e poco costoso per monitorare non solo la salute degli occhi, ma anche le malattie vascolari sistemiche. Le modifiche al sistema vascolare della retina possono essere i primi segni di malattie come la retinopatia diabetica e ipertensiva, di cui la diagnosi precoce può salvare la visione, il denaro, e migliorare la salute generale del paziente. Se si guarda alla vascolarizzazione della retina, oftalmologi in genere si basano su una valutazione qualitativa che può fare comparazioni nel tempo o tra i diversi oculisti difficile. Computer Aided sistemi sono ora incendio quantificare ciò che l'oculista è qualitativamente misura in quello che considerano essere le caratteristiche più importanti del sistema vascolare. Questi includono, ma non sono limitati a, tortuosità, arteriolare restringimento, anomalie di crossover, e il rapporto arteria-vena (AV). L'Università di Padova ha creato un sistema semi-automatico per la rilevazione e quantificazione vasi retinici a partire dalla rilevazione ottica del disco, la segmentazione nave, la stima di larghezza, il calcolo tortuosità, la classificazione AV, e il rapporto di AV. Abbiamo proposto un nuovo metodo per il rilevamento ottico che converte l'immagine retinica in un grafico e sfrutta disco metodi di aumento del vaso per calcolare i pesi bordo nel trovare il percorso più breve tra coppie di punti sulla periferia dell'immagine. Il segmento linea con il numero massimo di percorsi più brevi è considerata la posizione del disco ottico. Il metodo è stato testato su tre insiemi di dati accessibili al pubblico: DRIVE, DIARETDB1, e Messidor Composto da 40, 89, e 1200 immagini e ha raggiunto una precisione di 100, 98.88, e 99.42% respectively. Il secondo contributo è un nuovo algoritmo di calcolo anomalie AV ai punti di attraversamento. Nelle immagini della retina, segno di Gunn appare come una rastremazione della vena in un punto di passaggio, mentre il segno di Salus presenta come una curva a forma di S. Questo lavoro presenta un metodo per la quantificazione automatica di questi due segni once a incrocio è stato rilevato; combinando la segmentazione, l'arteria di classificazione della vena, e le tecniche di estrazione delle caratteristiche morfologiche per calcolare le larghezze delle vene e gli angoli che entrano ed escono il crossover. Risultati su due serie di dati mostrano la separazione tra le due classi e che possiamo in modo affidabile rilevare e quantificare Questi segni sotto le giuste condizioni. L'ultimo contributo in tortuosità compone di due parti. Uno studio comparativo è stato condotto su alcuni dei metodi più diffusi per la stima su un nuovo insieme di dati nave tortuosità. Che i risultati mostrano diversi metodi avere buon accordo con Cohen kappa Entrambi i selezionatori, mentre la metrica densità di tortuosità ha la più alta accordo metrica singola media di tipo di nave e selezionatore. Il secondo è un nuovo modo per migliorare curvature nei vasi segmentati sulla base di una differenza di Gabor filtri per creare una curvatura immagine migliorata. Theproposed Il metodo è stato testato su database RET-TORT utilizzando diversi metodi per calcolare tortuosità, e aveva più di correlazione di Pearson di .94 per arterie e vene per 0,882, superando singole formulazioni matematiche alla data. Questo valeva dopo aver testato il metodo proposto sul set di dati e, avendo valori di correlazione più elevati in tutta grader e tipo di imbarcazione tortuosità Rispetto ad altre metriche. Sintesi dei risultati: Il metodo di rilevazione disco ottico è stato testato su tre insiemi di dati accessibili al pubblico: DRIVE, DIARETDB1, e Messidor Composto da 40, 89, e 1200 immagini e ha raggiunto una precisione di 100, 98.88, e 99.42% respectively. Il metodo di quantificazione AV intaccare è stato testato su un piccolo insieme di dati di 10 attraversamento forniti dai medici Papageorgiou Hospital, Università Aristotele di Salonicco, Salonicco, Grecia. I risultati hanno mostrato separazione tra le normali e anormali Entrambe le classi per il segno Gunn e Salus. Il metodo è stato poi testato su un set di dati più grandi, a disposizione del pubblico che ha mostrato una buona separazione per il segno Gunn. Il metodo tortuosità Theproposed è stato testato su database RET-TORT utilizzando diversi metodi per calcolare tortuosità, e aveva più di correlazione di Pearson di .94 per arterie e vene per 0,882, superando singole formulazioni matematiche alla data. E 'stato poi testato su set di dati Theproposed in questa tesi, Ulteriori confermano l'efficacia del metodo.
Padayachy, Llewellyn. « Ultrasound as a non-invasive diagnostic tool in paediatric neurosurgery : relationship between the optic nerve sheath diameter (ONSD) and intracranial pressure (ICP) ». Doctoral thesis, University of Cape Town, 2015. http://hdl.handle.net/11427/16787.
Texte intégralBackground: Assessment of intracranial pressure (ICP) is an essential aspect in the management of most neurosurgical conditions in children. While invasive ICP monitoring is considered the criterion standard, the need for a reliable, non-invasive, easy-to-use and accurate method to detect and monitor raised ICP has inspired the development of many useful techniques. The present study examined the relationship between transorbital ultrasound measurement of the optic nerve sheath diameter (ONSD) and invasively measured ICP in children, as well as the influence of relevant physiological and demographic variables on this relationship. Methodology: ONSD measurement was performed using a high frequency, small footprint linear array probe, and prior to invasive ICP measurement. All patients were under general anaesthesia and being mechanically ventilated. Physiological variables including systolic blood pressure (SBP), diastolic blood pressure (DBP), mean arterial pressure (MAP), pulse rate, temperature, respiratory rate and end tidal carbon dioxide (ETCO2) level were recorded at the time of ONSD measurement. The ONSD measurements were analysed for repeatability, intra- and inter-observer variability as well for correlation between images acquired in different planes and those obtained from either eye. The diagnostic accuracy of ONSD measurement for detecting ICP at different thresholds of 20, 15, 10 and 5 mmHg was analysed. This analysis included evaluation of age-related thresholds for defining different ONSD cut-off values in children. Dynamic image acquisition was performed and analysed to evaluate the relevant pulsatile motion of the ONS as a marker of the sheath stiffness. Results: One hundred and seventy four children undergoing diagnostic or therapeutic surgical procedures were included in this study. ONSD measurement demonstrated good correlation with ICP across the entire patient cohort (r = 0.66, p < 0.001), but was better in children > 1 year or with a closed anterior fontanelle (AF) (r = 0.7, p < 0.001). Age above and below 1 year was found to be an appropriate age threshold for defining two different sets of ONSD cut-off values. The study however, supported using patency of the AF as a stronger clinical marker for describing different ONSD cut-off values in children. The second part of this work described a dynamic technique for analysing the pulsatile motion of the ONS. Analysis of the deformability index (DI) as an indirect marker of ONS stiffness, revealed a statistically significant relationship with ICP (sensitivity of 90%, specificity of 87% for detecting ICP ≥ 20 mmHg). Conclusion: Measurement of the ONSD is a sensitive surrogate marker of raised ICP, but demonstrated poorer specificity. This relationship was more reliable in older children, particularly when the AF was closed. Analysis of the dynamic characteristics of the ONS appeared to provide useful additional information as an independent marker, and may contribute to our overall understanding of ONSD measurement in raised ICP.
Padayachy, Vaishali. « Transorbital ultrasound measurement of the optic nerve sheath diameter (ONSD) as a screening tool for raised intracranial pressure in an acute care setting in children ». Master's thesis, University of Cape Town, 2016. http://hdl.handle.net/11427/20431.
Texte intégralEkberg, Lars Peter. « Development of ultra-precision tools for metrology and lithography of large area photomasks and high definition displays ». Doctoral thesis, KTH, Mätteknik och optik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-122264.
Texte intégralQC 20130515
Isaacson, Matthew David. « Using new tools to study the neural mechanisms of sensation : auditory processing in locusts and translational motion vision in flies ». Thesis, University of Cambridge, 2019. https://www.repository.cam.ac.uk/handle/1810/288741.
Texte intégralSHARMA, MOHIT. « COMBINED ECONOMIC EMISSION DISPATCH USING OPTIM –TOOL ». Thesis, 2012. http://dspace.dtu.ac.in:8080/jspui/handle/repository/13900.
Texte intégralCombined economic emission dispatch (CEED) problem is to schedule the committed generating units’ outputs to meet the required load demand at minimum operating cost with minimum emission simultaneously. This multi-objective CEED problem is converted into a single objective function using a price penalty factor. In this paper, combined economic emission dispatch problem (CEED) problem has been formulated using price penalty factor and solving the problem using GA toolbox of MATLAB R2008b. The multi-objective optimization problem is solved using optimization tool by means of assigning a price penalty factor to the emission function. This method makes it possible to combine the two objective functions into a single objective one. In the proposed method, price penalty factor is calculated and by calculating the value of hi with the described method and MATLAB OPTIMTOOL program is run for each value hi. The m-files for constraint function and objective function are written to execute the program in OPTIMTOOL in MATLAB. The feasibility of the proposed approach is demonstrated for two different power systems, six generators unit and eleven generators units for 500-2500 MW loads and compared with other methods as particle swarm optimization(PSO), differential evolution(DE), -iteration, recursive(RM) and simplified recursive method(SRM) for given systems .Data for six generators unit and eleven generators unit are taken from Scientific Research and Essays, Ugur Guvenc and Electric Power Components and Systems, R. Balamurugan , S. Subramanian. The study results show that the proposed approach is more efficient in finding higher quality solutions in CEED problems. Software used: MATLAB 7.6.0
Livres sur le sujet "OPTIM –TOOL"
Pearson, Ruth, Madhura Killedar, Janka Petravic, Jakub J. Kakietek, Nick Scott, Kelsey L. Grantham, Robyn M. Stuart et al. Optima Nutrition : An Allocative Efficiency Tool to Reduce Childhood Stunting by Better Targeting of Nutrition-Related Interventions. Springer, 2018. http://dx.doi.org/10.1596/31366.
Texte intégralRonen, Boaz, Joseph S. Pliskin et Shimeon Pass. Principles of Management in the Dynamic Healthcare Environment (DRAFT). Oxford University Press, 2018. http://dx.doi.org/10.1093/med/9780190843458.003.0002.
Texte intégralWinearls, Christopher G. Kidney disease-focused features on examination. Sous la direction de Christopher G. Winearls. Oxford University Press, 2015. http://dx.doi.org/10.1093/med/9780199592548.003.0005.
Texte intégralNagy, Andrea Marika. Developing the tools for molecular interferometry : Ultrafast pulse shaping and characterization using an acousto-optic programmable dispersive filter and transient grating frequency resolved optical gating. 2002, 2002.
Trouver le texte intégralUnited States Government US Army. Technical Manual TM 9-1240-416-13&P Operator and Field Maintenance Manual Including Repair Parts and Special Tools List for the M150 Sight, Rifle Combat Optic (RCO) (NSN : 1240-01-557-1897) Change 1. Independently Published, 2019.
Trouver le texte intégralChapitres de livres sur le sujet "OPTIM –TOOL"
Sychugov, V. A., A. V. Tishchenko, M. S. Klimov et O. Parriaux. « CAD-Tool for Integrated Optic Coupling Gratings ». Dans Micro System Technologies 90, 44–51. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-45678-7_7.
Texte intégralNaves, S. Cyril. « B-SPECS : An Optic Based Recognition Tool for Blind ». Dans Advances in Parallel Distributed Computing, 544–51. Berlin, Heidelberg : Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-24037-9_54.
Texte intégralZipoli Caiani, Silvano. « When Mechanical Computations Explain Better ». Dans Language, Cognition, and Mind, 463–77. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-50200-3_21.
Texte intégralWu, Zhichao, Michael A. Coote et Keith R. Martin. « Getting Better : Learning, New Tools and Risk Management ». Dans The Optic Nerve Head in Health and Disease, 159–62. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6838-5_10.
Texte intégralBouzid, Karim. « 5-Tools and Methods for Electro-Optic Simulation ». Dans OLED Microdisplays, 95–117. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781119004745.ch4.
Texte intégralLangloh, N., V. Christopoulos, S. Van Langendonck, J. Cornelis, R. Vounckx, A. Kirk, R. Buczynski, H. Thienpont et I. Veretennicoff. « Optsim : A Tool for the Design of Optical Parallel Computer Architectures ». Dans Applications of Photonic Technology 2, 553–61. Boston, MA : Springer US, 1997. http://dx.doi.org/10.1007/978-1-4757-9250-8_88.
Texte intégralFernandez-Granero, Miguel Angel, Auxiliadora Sarmiento Vega, Anabel Isabel García, Daniel Sanchez-Morillo, Soledad Jiménez, Pedro Alemany et Irene Fondón. « Automatic Tool for Optic Disc and Cup Detection on Retinal Fundus Images ». Dans Advances in Computational Intelligence, 246–56. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-59153-7_22.
Texte intégralZhang, Yuan Liang, Zhi Min Zhou et Xu Zhang. « Compensation Control of Cutting Tool Position in Machining Non-Axisymmetric Optic Mirror Surface ». Dans Materials Science Forum, 181–86. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-990-3.181.
Texte intégralElrawashdeh, Zeina, Philippe Revel, Christine Prelle et Frédéric Lamarque. « High Precision Fabrication of an Innovative Fiber-Optic Displacement Sensor ». Dans Lecture Notes in Mechanical Engineering, 48–55. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_5.
Texte intégralBlades, M. W., H. G. Schulze, S. O. Konorov, C. J. Addison, A. I. Jirasek et R. F. B. Turner. « New Tools for Life Science Research Based on Fiber-Optic-Linked Raman and Resonance Raman Spectroscopy ». Dans New Approaches in Biomedical Spectroscopy, 1–13. Washington, DC : American Chemical Society, 2007. http://dx.doi.org/10.1021/bk-2007-0963.ch001.
Texte intégralActes de conférences sur le sujet "OPTIM –TOOL"
Grama, Alin, et Dorin Petreus. « A Matlab simulator tool for a class E power amplifier designed to generate plasma torch ». Dans 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2012. http://dx.doi.org/10.1109/optim.2012.6231867.
Texte intégralCrisafulli, Vittorio, Andrea Gallivanoni et Cristiano Pastore. « Model based design tool for EMC reduction using spread spectrum techniques in induction heating platform ». Dans 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2012. http://dx.doi.org/10.1109/optim.2012.6231901.
Texte intégralSpammer, Stephanus J., Pieter L. Swart et Hendrik C. L. Loock. « Early warning tool for chute failure in a sugar mill ». Dans Pacific Northwest Fiber Optic Sensor Workshop, sous la direction de Chuck C. Jung et Eric Udd. SPIE, 1998. http://dx.doi.org/10.1117/12.323425.
Texte intégralLalam, Nageswara, Ibrahiim Syed, Dolendra Karki, Kent Weisenberg, Ruishu F. Wright et Paul R. Ohodnicki. « Robotic fiber optic internal deployment tool for pipeline integrity monitoring ». Dans Fiber Optic Sensors and Applications XVIII, sous la direction de Glen A. Sanders, Robert A. Lieberman et Ingrid U. Scheel. SPIE, 2022. http://dx.doi.org/10.1117/12.2619045.
Texte intégralKilmer, Joyce P., John P. Varachi, Jr. et Hakan H. Yuce. « Postmortem analysis as a tool for building optical cable reliability (Invited Paper) ». Dans Fiber Optic Components and reliability, sous la direction de Paul M. Kopera et Dilip K. Paul. SPIE, 1992. http://dx.doi.org/10.1117/12.135418.
Texte intégralOliver, Steven A., Charles A. DiMarzio, Aniruddha B. Kale, Scott C. Lindberg et Stephen W. McKnight. « Magneto-optic Kerr effect sensors for fiber optic applications ». Dans Optical Tools for Manufacturing and Advanced Automation, sous la direction de Ramon P. DePaula. SPIE, 1994. http://dx.doi.org/10.1117/12.169948.
Texte intégralMaican, Catalin Ioan. « Methods for increasing the access to information databases using open source tools ». Dans 2010 12th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2010. http://dx.doi.org/10.1109/optim.2010.5510365.
Texte intégralMihet-Popa, L., C. Koch-Ciobotaru, F. Isleifsson et H. Bindner. « Development of tools for simulation systems in a distribution network and validated by measurements ». Dans 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2012. http://dx.doi.org/10.1109/optim.2012.6231807.
Texte intégralWada, T., K. Okayama et Y. Morigo. « Tool wear of sintered cubic boron nitride compact in cutting hardened steel with high-pressure coolant supplied ». Dans HPSM/OPTI 2016. Southampton UK : WIT Press, 2016. http://dx.doi.org/10.2495/hpsm160171.
Texte intégralGirbea, Alina, Francisc Sisak et Liviu Perniu. « Design, implementation and monitoring of a screw order handling process using business process management tools ». Dans 2010 12th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2010. http://dx.doi.org/10.1109/optim.2010.5510565.
Texte intégralRapports d'organisations sur le sujet "OPTIM –TOOL"
VanKuiken, J. C., M. J. Jusko et M. E. Samsa. OPTUM : Optimum Portfolio Tool for Utility Maximization documentation and user's guide. Office of Scientific and Technical Information (OSTI), septembre 2008. http://dx.doi.org/10.2172/943428.
Texte intégralBlundell, S. User guide : the DEM Breakline and Differencing Analysis Tool—gridded elevation model analysis with a convenient graphical user interface. Engineer Research and Development Center (U.S.), août 2022. http://dx.doi.org/10.21079/11681/45040.
Texte intégralHunter, R., S. Ross et Jing-Ru Cheng. A general-purpose multiplatform GPU-accelerated ray tracing API. Engineer Research and Development Center (U.S.), juillet 2023. http://dx.doi.org/10.21079/11681/47260.
Texte intégralPerdigão, Rui A. P. New Horizons of Predictability in Complex Dynamical Systems : From Fundamental Physics to Climate and Society. Meteoceanics, octobre 2021. http://dx.doi.org/10.46337/211021.
Texte intégralL51574 Non-Conventional Means for Monitoring Pipelines in Areas of Soil Subsidence or Soil Movement. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), juin 1988. http://dx.doi.org/10.55274/r0010329.
Texte intégral