Thèses sur le sujet « Numerica Modeling »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleures thèses pour votre recherche sur le sujet « Numerica Modeling ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les thèses sur diverses disciplines et organisez correctement votre bibliographie.
Villa, A. « Three dimensional geophysical modeling : from physics to numerical simulation ». Doctoral thesis, Università degli Studi di Milano, 2010. http://hdl.handle.net/2434/148440.
Texte intégralDe, Martino Giuseppe. « Multi-Value Numerical Modeling for Special Di erential Problems ». Doctoral thesis, Universita degli studi di Salerno, 2015. http://hdl.handle.net/10556/1982.
Texte intégralThe subject of this thesis is the analysis and development of new numerical methods for Ordinary Di erential Equations (ODEs). This studies are motivated by the fundamental role that ODEs play in applied mathematics and applied sciences in general. In particular, as is well known, ODEs are successfully used to describe phenomena evolving in time, but it is often very di cult or even impossible to nd a solution in closed form, since a general formula for the exact solution has never been found, apart from special cases. The most important cases in the applications are systems of ODEs, whose exact solution is even harder to nd; then the role played by numerical integrators for ODEs is fundamental to many applied scientists. It is probably impossible to count all the scienti c papers that made use of numerical integrators during the last century and this is enough to recognize the importance of them in the progress of modern science. Moreover, in modern research, models keep getting more complicated, in order to catch more and more peculiarities of the physical systems they describe, thus it is crucial to keep improving numerical integrator's e ciency and accuracy. The rst, simpler and most famous numerical integrator was introduced by Euler in 1768 and it is nowadays still used very often in many situations, especially in educational settings because of its immediacy, but also in the practical integration of simple and well-behaved systems of ODEs. Since that time, many mathematicians and applied scientists devoted their time to the research of new and more e cient methods (in terms of accuracy and computational cost). The development of numerical integrators followed both the scienti c interests and the technological progress of the ages during whom they were developed. In XIX century, when most of the calculations were executed by hand or at most with mechanical calculators, Adams and Bashfort introduced the rst linear multistep methods (1855) and the rst Runge- Kutta methods appeared (1895-1905) due to the early works of Carl Runge and Martin Kutta. Both multistep and Runge-Kutta methods generated an incredible amount of research and of great results, providing a great understanding of them and making them very reliable in the numerical integration of a large number of practical problems. It was only with the advent of the rst electronic computers that the computational cost started to be a less crucial problem and the research e orts started to move towards the development of problem-oriented methods. It is probably possible to say that the rst class of problems that needed an ad-hoc numerical treatment was that of sti problems. These problems require highly stable numerical integrators (see Section ??) or, in the worst cases, a reformulation of the problem itself. Crucial contributions to the theory of numerical integrators for ODEs were given in the XX century by J.C. Butcher, who developed a theory of order for Runge-Kutta methods based on rooted trees and introduced the family of General Linear Methods together with K. Burrage, that uni ed all the known families of methods for rst order ODEs under a single formulation. General Linear Methods are multistagemultivalue methods that combine the characteristics of Runge-Kutta and Linear Multistep integrators... [edited by Author]
XIII n.s.
Ferrari, Giacomo <1989>. « A Numerical Proposal of an Extended Solid Modeling System ». Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2017. http://amsdottorato.unibo.it/7858/1/Ferrari_Giacomo_Tesi.pdf.
Texte intégralZANELLA, Mattia. « Boltzmann-type and mean-field modeling of social dynamics : numerics, control, uncertainty quantification ». Doctoral thesis, Università degli studi di Ferrara, 2017. http://hdl.handle.net/11392/2488037.
Texte intégralThe aim of the present manuscript is to investigate a novel perspective in the modeling and control of complex system both in the deterministic and stochastic case, with particular attention to numerical methods, control methodologies and uncertainty quantification. In Chapter 1 we construct a Boltzmann--type control of a consensus dynamics. Based on a microscopic model we design a Boltzmann-type optimal control thanks to the model predictive control (MPC) approach in the case of an instantaneous control. In Chapter 2 we apply the MPC control approach in the context of complex networks where a control acts over a minimum set of nodes/agents influencing the dynamics of the whole network. We observed how the introduction of a suitable selective control depending on the connection degree of each node is capable of driving the overall opinion towards consensus. Chapter 3 regards the derivation of performance bounds for mean--field MPC control with varying horizon. Here we have established a computable and provable bound on the difference in the cost functional for MPC-controlled and optimally controlled dynamics in the case of a large number of agents. In Chapter 4 we developed numerical schemes that conserve structural property of mean--field equations: non--negativity of the solution, entropy dissipation and large time behavior. The methods here developed are second order accurate, they do not require any restriction on the mesh size and are capable to capture the asymptotic steady states with arbitrary accuracy. These properties are essential for a correct description of the underlying physical problem. Applications of the schemes to several nonlinear Fokker-Planck equations describing emerging collective behavior in socio-economic and life sciences are presented. We further applied in Chapter 5 the developed numerical techniques to a multivariate non--local model for opinion dynamics over complex network, where interactions depend on the opinion itself and on the discrete number of connections. It has been proven that for different choices of weights functions the introduced generator of the network may produce stationary scale-free degree distributions as well as uniform random graphs. Further, we observed that the presence of a small portion of highly connected agents may drive the overall dynamics towards their position. In Chapter 6 we further investigate multivariate models with a direct application to decision science. In particular, we introduce and discuss multivariate kinetic models describing the influence of competence in the evolution of decisions in a multiagent system. The exchange mechanism includes the role of the agents’ tendency to behave in the same way as if they were as good, or as bad, as their partner: the so-called equality bias. The presented modeling is inspired by real experiments and reproduces the empirical findings. The role of stochastic quantities in the dynamics is investigated in Chapter 7. Here we analyze the effect of the uncertainty in the interaction parameter in a second-order alignment model of the Cucker-Smale type using a generalized polynomial chaos approach. We observed that the presence of negative tails in the distribution of the random inputs lead to the divergence of the expected velocities of the system of agents, even in the regimes of unconditional flocking. We formalized a selective MPC approach to stabilize the dynamics and to steer the expected velocities toward the desired one, even in the divergence regimes. Chapter 8 is part of an ongoing work. Here we derived mean-field equations from microscopic Cucker-Smale type model dependent on random input in several cases. Further, a novel structure preserving numerical technique based on both Monte Carlo and stochastic Galerkin-gPC methods is addressed. Numerical experiments show that the scheme maintain the spectral accuracy for the statistical quantities of interest, like mean and variance.
Rucci, Marco. « Geometric Surface Processing and Virtual Modeling ». Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3426305.
Texte intégralIn questa tesi sono trattati due argomenti principali "Geometric Surface Processing" e "Virtual Modeling". L'ispirazione e la coordinazione di gran parte del lavoro di ricerca contenuto nella tesi e' dovuta al progetto New Interactive and Innovative Technologies for CAD (NIIT4CAD), finanziato dall'European Eurostars Programme. NIIT4CAD ha l'ambizioso obiettivo di superare le limitazioni degli approcci tradizionali alla modellazione di superfici dei moderni sistemi di progettazione assistita al calcolatore, introducendo nuove metodologie e tecnologie basate su superfici di suddivisione in un nuovo framework virtuale di modellazione. Tali innovazioni permetteranno progettisti ed ingegneri a trasformare velocemente ed intuitivamente l'idea di una forma in un modello geometrico ad alta qualita' adatto per scopi ingegneristici e di produzione. Uno degli obiettivi della tesi e' proprio la ricostruzione e modellazione di superfici, rappresentanti oggetti a topologia arbitraria, partendo da curve 3D irregolari acquisite tramite un dispositivo smart-pen sviluppato ad-hoc. La tesi e' organizzata in due parti: "Geometric Surface Processing" e "Virtual Modeling". Durante lo sviluppo della pipeline geometrica del nostro sistema di modellazione virtuale, abbiamo affrontato diverse problematiche che hanno attratto il nostro interesse ed aperto nuove aree di ricerca e sperimentazione. Nella prima parte, presentiamo tali teorie ed alcune applicazioni nell'ambito di Geometric Surface Processing. Questo ci permette di formalizzare meglio e dare una visione piu' ampia ad alcune delle tecniche usate nelle ultime versioni del nostro sistema ricostruzione di superfici e modellazione virtuale. Il lavoro di ricerca per entrambi gli argomenti ha portato al raggiungimento di importanti risultati che sono stati pubblicati e presentati in articoli e conferenze di rilevanza internazionale.
BOTTI, SOFIA. « Mathematical modeling of Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes (hiPSC-CMs) : from ionic currents to 3D ventricle models ». Doctoral thesis, Università degli studi di Pavia, 2022. https://hdl.handle.net/11571/1467309.
Texte intégralZanello, Francesca. « Contributions to modeling of Venice coastal peatlands and wetlands ». Doctoral thesis, Università degli studi di Padova, 2011. http://hdl.handle.net/11577/3427411.
Texte intégralLa presente Tesi riferisce di un articolato lavoro di ricerca che ha coperto diversi aspetti connessi con la modellazione dei processi idrologici sotterranei nei suoli organici in relazione ai principali rischi indotti dalla subsidenza delle aree torbose e alla conservazione e all’uso consapevole delle aree umide nel comprensorio lagunare veneziano. Sono state analizzate le dinamiche delle deformazioni dei terreni torbosi sia su lunga che su breve scala temporale e si propone un approccio modellistico in due step finalizzato alla separazione dei contributi reversibile e irreversibile della dello spostamento della superficie. Una relazione empirica per la stima degli spostamenti indotti dalla bio-ossidazione della matrice organica è stata quindi calibrata a partire dalla stimata determinata porzione irreversibile degli spostamenti registrati nell’ambito di una campagna sperimentale di 4 anni nel Bacino Zennare, Italia, Si è infine investigato l’evoluzione attesa delle zone torbose nell’area di Venezia nel secolo in corso. Lo studio dell’idrologia dei suoli organici è proseguito con l’analisi del comportamento isteretico della curva di ritenzione capillare misurata nei suoli del Bacino Zennare. I risultati dell’applicazione di un modello che accoppia un modello di isteresi con una relazione empirica che lega la variazione di porosità della matrice solida al grado di saturazione in acqua hanno messo in luce l’importanza delle deformazioni reversibili nella definizione delle curve di risalita capillare nei suoli organici. L’ultima parte è focalizzata sulle dinamiche idrologiche delle zone barenali, delicate aree intertidali caratterizzate da un forte feedback tra l’atmosfera e il sottosuolo, principalmente in termini di flussi d’aria. Si è sviluppato un modello bifase al fine di approfondire gli effetti del flusso d’aria nelle dinamiche sotterranee. È stato adottata una formulazione alle pressioni che consente il trattamento naturale delle complesse condizioni al contorno non lineari sull’interfaccio suolo/atmosfera al fine di includere gli effetti di evapotraspirazione durante i periodi di emersione e le fluttuazioni mareali in quelle di sommersione della superficie barenale. I risultati dell’applicazione del modello ad alcuni casi test finalizzati al verificare l’importanza di considerare il flusso d’aria nella descrizione del flusso idrico nella zona insatura sono infine proposti.
Gonzalez, Bejarano Mario Elias. « Modelagem numerica e experimental do processo de mudança de fase em placas paralelas ». [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263754.
Texte intégralDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica
Made available in DSpace on 2018-08-09T04:28:28Z (GMT). No. of bitstreams: 1 GonzalezBejarano_MarioElias_M.pdf: 3100005 bytes, checksum: 12668e0ddb58dbc3a200122e0c40da4b (MD5) Previous issue date: 2006
Resumo: No presente trabalho estuda-se o fenômeno de mudança de fase de um PCM em placas paralelas que compõe um banco de gelo. Parâmetros importantes como o espaçamento entre as placas, a temperatura da placa, a temperatura do fluido de trabalho e a vazão, são considerados numa faixa variável. Desenvolveu-se um modelo numérico para simular o processo de solidificação com o objetivo de determinar a posição da frente de solidificação e a distribuição de temperaturas na fase sólida, além de avaliar a influência dos parâmetros considerados. As equações governantes, considerando transferência de calor unidimensional, foram discretizadas utilizando o método de diferenças finitas e o esquema modificado de espaço de tempo variável (MVTS) para a resolução da malha computacional. Considera-se a temperatura inicial do PCM igual à da solidificação e com propriedades constantes. A modelagem da solidificação foi feita para os casos de temperatura da superfície da placa constante e variável. Para validar o modelo numérico, foi construída uma bancada experimental onde foram feitos diversos testes com os parâmetros mencionados anteriormente. Os resultados numéricos obtidos foram analisados e comparados. Estes mostraram concordância satisfatória com os resultados experimentais para a modelagem realizada com temperatura da placa variável. Os resultados deste trabalho podem ser utilizados para o projeto de armazenadores de calor latente em geometrias planas
Abstract: In the present work, the phase change phenomenon of a PCM in parallel plates that compose an ice bank is studied. Important parameters such as the gap between the plates, the plate temperature, the temperature and flow of the secondary fluid are considered. A numerical model was developed to simulate the solidification process with the aim of determine the position of the solidification front and the temperatures distribution at the solid phase, moreover, to evaluate the influence of the considered parameters. The governing equations, considering one-dimensional heat transfer, had been discretized using the finite differences method and the modified variable time steps scheme (MVTS) to resolve the computational mesh. The PCM was considered initially at solidification temperature and with constant thermal properties. The solidification model was made for the cases of constant plate temperature and variable temperature. To validate the numerical model, an experimental device was constructed where many tests were carried through with the mentioned parameters. The numerical results were analyzed and compared. These ones show satisfactory agreement with the experimental results for the modeling carried through with variable plate temperature. The results of this work can be used for the project of latent heat storage systems with plain geometries
Mestrado
Engenharia Termica e Fluidos
Mestre em Engenharia Mecânica
Manoli, Gabriele. « Contribution to modeling of soil-plant-atmosphere interactions and coupled hydro-geophysical data assimilation ». Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3423556.
Texte intégralLa comprensione dei molteplici meccanismi che regolano l'interazione tra suolo, vegetazione e atmosfera è oggi divenuta un imperativo nel campo della ricerca scientifica, poichè numerose sono le conseguenze che la presenza antropica puo avere sulla stabilità della Biosfera, a livello sia globale che locale. Questo lavoro di tesi si propone l'obiettivo di sviluppare nuovi strumenti modellistici che consentano una più accurata comprensione e descrizione del sistema suolo-vegetazione-atmosfera. A tal fine, un modello di trapirazione e fotosintesi della vegetazione è stato introdotto in un codice numerico per la descrizione del flusso in mezzi porosi. La dinamica dell'umidita del suolo e descritta dall'equazione tridimensionale di Richards, mentre il trasporto d'acqua attraverso le radici ed all'interno della pianta e definito tramite un modello di resistenze e potenziali idrici basato sulla legge di Ohm. Il flusso traspirativo è regolato dal potenziale fogliare, a sua volta determinato da condizioni locali di umidità del suolo e dalle forzanti atmosferiche. Il modello idraulico di assorbimento radicale è collegato all'atmosfera tramite il calcolo della resistenza stomatica, determinata sulla base di un modello di ottimizzazione dell'apertura degli stomi che massimizza la fotosintesi (descritta per mezzo di un modello biochimico) e minimizza la traspirazione. Tale approccio modellistico è stato impiegato per comprendere i meccanismi di competizione tra diverse piante per l'assorbimento idrico in una piantagione di Pinus Taeda. Il modello è stato inoltre integrato con un modulo di crescita del mais (Zea mays L.) per studiare la produttività agricola alla scala di bacino. Al fine di descrivere in modo completo le interazioni fra vegetazione ed atmosfera, il modello è stato poi accoppiato con la dinamica dello strato limite planetario ed utilizzato per comprendere l'effetto della falda e delle condizioni dell'atmosfera libera sugli eventi di precipitazione dovuti alla formazione di nubi convettive. I risultati modellistici illustrati in questa tesi sono confrontati con osservazioni di contenuto d'acqua nel suolo, misure di flussi xilematici, flussi energetici al di sopra della canopy ed eventi convettivi di precipitazione, dimostrando le ottime capacità predittive del modello sviluppato. Sia le osservazioni che i risultati numerici sono tuttavia caratterizzati da un certo grado di errore. Per ovviare a tale incertezza è stato pertanto studiato un algoritmo di assimilazione dei dati che consente di incorporare le osservazioni fisiche nel modello dinamico idrologico. Dal momento che recenti studi di settore si sono focalizzati sull'utilizzo di metodi geofisici indiretti per la caratterizzazione dei processi di interazione fra suolo e vegetazione, in questo lavoro di tesi è stato sviluppato un metodo particle filter iterativo per l'inversione idro-geofisica accoppiata di dati di tomografia elettrica. I risultati presentati in questa tesi dimostrano l'abilità del metodo proposto di migliorare le previsioni e stimare i parametri del modello e pongono le basi per un nuovo approccio alla simulazione numerica del sistema suolo-vegetazione-atmosfera.
Martalo', G. « DIFFERENT SCALE MODELING FOR CROWD DYNAMICS AND MULTI-TEMPERATURE GAS MIXTURES ». Doctoral thesis, Università degli Studi di Milano, 2014. http://hdl.handle.net/2434/243643.
Texte intégralScudeler, Carlotta. « Numerical modeling of flow and solute transport phenomena in subsurface and coupled surface-subsurface hydrology ». Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3421912.
Texte intégralLo scopo di questa tesi e' fornire dei contributi all'idrologia e alla modellazione idrologica nell'ambito di un modello numerico specifico, il modello CATchment HYdrology Flow-Transport (CATHY_FT), utilizzato per simulare processi integrati di superficie e sotterranei e di flusso e trasporto. Questi contributi riguardano tre temi principali: il miglioramento del comportamento numerico di modelli idrologici che simulano fenomeni di flusso e trasporto, l'approfondimento di condizioni al contorno complesse con l'obbiettivo di ridurre gli errori relativi alla loro modellazione e il test e l'analisi comparativa di modelli a base fisica utilizzati per simulare processi di flusso e trasporto sotterranei. Il lavoro per raggiungere l'obbiettivo generale viene diviso in quattro step. Nel primo step l'algoritmo di Larson-Niklasson e' implementato in CATHY_FT per ricostruire velocita' conservatrici della massa a partire da una soluzione lineare (o P1) di Galerkin dell'equazione di Richards, in modo da permettere al modello di trasporto avvettivo (basato sui volumi finiti) di conservare la massa, cosa che dipende strettamente dall'accuratezza del campo di velocita' che questo utilizza. Confrontando i risultati ottenuti con le velocita' derivanti dalla soluzione P1 di Galerkin e quelle ricostruite, viene mostrato che un campo di velocita' localmente conservativo e' necessario per ottenere risultati accurati con il trasporto. Nella seconda fase viene effettuata un'analisi dettagliata del comportamento delle condizioni ai limiti nella zona del fronte di infiltrazione con il modello di flusso di CATHY_FT. Le simulazioni numeriche esaminano il comportamento del modello in condizioni complesse come quelle di eterogeneita' e di flusso di superficie e sotterraneo accoppiato. Viene dimostrato che la soluzione numerica puo' essere fortemente influenzata dal modo in cui la zona di infiltrazione viene trattata nei modelli idrologici e che considerazioni accurate sono sempre necessarie quando si usano approssimazioni, in presenza di versanti eterogenei e per le zone di infiltrazione che si formano nella superficie terrestre. Come terzo step, CATHY_FT viene testato al Landscape Evolution Observatory del Biosphere 2 in Arizona. Viene eseguita un'analisi dettagliata di dati sperimentati raccolti durante un esperimento di tracciante isotopico e da un versante artificiale intensivamente controllato. Le informazioni comprendono la qualita' e la quantita' della portata sotterranea e dati puntuali di flusso e trasporto. Questi dati di flusso e tracciante sono utilizati per esplorare fenomeni complessi e le ipotesi associate (e.g., eterogeneita', frazionamento e dispersione), procedendo dalla risposta di flusso a quella di trasporto e dalla risposta integrata a quella puntuale. Questo approccio incrementale evidenzia le sfide legate alla validazione della nuova generazione di modelli idrologici integrati quando si guarda a diversi tipi e livelli di dati osservati. Infine, viene eseguita un'analisi conclusiva che si lega a tutti e tre i temi della tesi, descrivendo alcune caratteristiche del modello CATHY_FT, discutendo problemi chiave legati al suo sviluppo futuro e testando il suo compertamento fisico e numerico sia per scenari sintetici che reali. Questo step finale della tesi affronta la miriade di sfide legate alla risoluzione accurata ed efficace del comportamento difficile dell'equazione di avezione-dispersione per processi di trasporto di soluto sotterraneo, alla risoluzione appropriata delle condizioni ai limiti complesse per rappresentare le interazioni di soluto attraverso la superficie terrestre e, in generale, alla rappresentazione delle interazioni tra i fenomeni di flusso e trasporto nell'ambiente superficiale e sotterraneo.
MONACO, Alessia. « Experimental analysis, numerical and analytical modeling of shear strength mechanisms in Hybrid Steel Trussed Concrete Beams ». Doctoral thesis, Università degli Studi di Palermo, 2014. http://hdl.handle.net/10447/91703.
Texte intégralBettella, Francesco. « Reologia e dinamica di propagazione delle colate detritiche : analisi e modellazione a diversa scala ». Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3423371.
Texte intégralIl lavoro di ricerca, presentato in questo elaborato di tesi, riguarda lo studio della reologia delle colate detritiche attraverso indagini di laboratorio a piccola scala che permettono la caratterizzazione di miscele di acqua e sedimento che riproducono la fase matriciale e una parte della frazione solida (massimi diametri utilizzati in laboratorio pari a 19 mm) di colate detritiche verificatesi nelle Alpi e Prealpi orientali italiane. L’obiettivo è individuare procedure innovative, facilmente riproducibili e a basso costo per la definizione delle caratteristiche reologiche e fisiche che descrivono la dinamica delle colate detritiche, in modo da rendere disponibile questa tipologia di indagine a un pubblico più vasto e in particolar modo agli utenti dei modelli numerici monofasici. Per quanto riguarda i modelli analizzati nello studio, la scelta è ricaduta nei monofasici poiché sono la tipologia di modelli che, ad ora, è maggiormente diffusa e la cui efficacia è stata comprovata in diversi studi scientifici (Rickenmann et al., 2006; Bisantino et al., 2009; Calligaris e Zini, 2012). Il lavoro di ricerca, oltre al mero studio delle caratteristiche reologiche, vuole dare quindi un contributo alla definizione di procedure per la calibrazione dei parametri di input dei modelli numerici in quanto, come descritto anche da Calligaris e Zini (2012), attualmente l’obiettivo fondamentale nel campo dello studio delle colate detritiche è definire chiaramente le variabili di input dei modelli numerici per meglio comprendere la formazione dei conoidi da colata detritica e per predire, mitigare e controllare il pericolo che questi fenomeni hanno nei confronti delle comunità che vivono in questi territori. Riepilogando, gli obiettivi di questo studio sono: - studiare il comportamento delle colate detritiche a piccola scala con l’utilizzo di diversi strumenti, cercando di identificare nuove procedure per la definizione delle caratteristiche reologiche utili anche a fini modellistici; - determinare l’applicabilità dei risultati ottenuti a piccola scala alla scala reale e in particolare nella modellazione numerica delle colate detritiche, e identificare metodologie per la calibrazione dei parametri di input della modellazione numerica; - valutare i risultati ottenuti attraverso la loro applicazione alla modellazione di eventi reali di colata detritica, anche attraverso l’utilizzo di diversi modelli numerici sui quali poter effettuare un confronto ed un’analisi di performance. Gli obiettivi prefissati sono stati raggiunti inizialmente attraverso un’analisi bibliografica dello stato dell’arte concernente la fisica delle colate detritiche e in particolar modo ai metodi utilizzati per la misura delle grandezze fisiche che ne descrivono il comportamento. Le conoscenze acquisite sono state quindi messe a frutto attraverso un’indagine di laboratorio che ha visto l’utilizzo di due diverse strumentazioni per lo studio delle caratteristiche reologiche della frazione più fina che compone colate detritiche reali verificatesi in territorio alpino. Gli strumenti utilizzati sono un reometro con giranti a vano Brookfield DVIII Ultra e il reometro a piano inclinato presente nei laboratori del C.N.R. di Padova (D’Agostino e Cesca, 2009-a; D’Agostino et al., 2010). Oltre all’applicazione di procedure già riportate in letteratura, nell’ambito delle misure con reometro a piano inclinato è stato messo a punto, partendo dalle considerazioni di Hungr (1995), un metodo innovativo per la definizione degli sforzi tangenziali medi agenti al fondo nella fase di arresto di una colata detritica. Successivi test realizzati su piano inclinato, avvalendosi dell’uso di fotocellule per la misura della velocità del fronte del flusso di detriti all’interno di una canaletta, hanno permesso di effettuare interessanti considerazioni sui regimi di flusso che governano la fase di arresto e deposizione delle colate detritiche. Il secondo obiettivo, relativo alla definizione di metodologie per la calibrazione dei parametri di input della modellazione numerica, è stato perseguito attraverso due approcci diversi che prevedono l’utilizzo o meno dei risultati di laboratorio. La prima procedura proposta si basa su prove reologiche su piano inclinato mentre la seconda utilizza la relazione tra magnitudo dell’evento e mobilità già descritta in letteratura (Rickenmann, 1999; Lorente et al., 2003) e un indice reologico realizzato ad hoc. Nell’ultima fase del lavoro di ricerca si è realizzato un confronto e un’analisi di performance su due modelli bidimensionali monofasici, ampiamente utilizzati nel campo della modellazione delle colate detritiche, FLO-2D (O’Brien et al., 1993) e RAMMS (Rapid Mass MovementS, Christen et al. 2010). In questa fase di lavoro è stata valutata l’attendibilità dei due modelli nella modellazione di colate detritiche dalle caratteristiche diverse per comportamento reologico e volumetria in gioco, e nella modellazione di situazioni topografiche diverse (libertà di divagazione del flusso o presenza di opere di trattenuta importanti). In questa fase è stata inoltre valutata l’applicabilità dei test dinamici su reometro a piano inclinato per la calibrazione dei parametri utilizzati in FLO-2D. La bontà dei risultati delle modellazioni è stata misurata sulla base di un confronto tra l’area del deposito reale e quella simulata dal modello attraverso l’applicazione di due indici. Il primo misura l’accuratezza positiva della simulazione (indice utilizzato da Scheidl e Rickenmann, 2010) mentre il secondo, realizzato ad hoc, misura l’efficienza del modello valutando quanto il flusso modellato vada a coprire aree che nella realtà non sono state interessate dalla colata.
Bachini, Elena. « Numerical methods for Shallow Water Equations on regular surfaces ». Doctoral thesis, Università degli studi di Padova, 2019. http://hdl.handle.net/11577/3422699.
Texte intégralROMANENGO, CHIARA. « Recognition and representation of curve and surface primitives in digital models via the Hough transform ». Doctoral thesis, Università degli studi di Genova, 2023. https://hdl.handle.net/11567/1103813.
Texte intégralNilsson, Cecilia. « Modelling of Dynamically Loaded Shotcrete ». Thesis, KTH, Betongbyggnad, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-36923.
Texte intégralLin, Yuan. « Numerical modeling of dielectrophoresis ». Licentiate thesis, Stockholm, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4014.
Texte intégralZolfaghari, Reza. « Numerical Simulation of Reactive Transport Problems in Porous Media Using Global Implicit Approach ». Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-197853.
Texte intégralDiese Arbeit konzentriert sich auf die numerische Berechnung reaktiver Transportprobleme in porösen Medien. Es werden prinzipielle Mechanismen von Fluidströmung und reaktive Stofftransport in porösen Medien untersucht. Um chemische Reaktionen und Stofftransport zu koppeln, wurden die Ansätze Global Implicit Approach (GIA) sowie Sequential Non-Iterative Approach (SNIA) in die Software OpenGeoSys (OGS6) implementiert. Das von Kräutle vorgeschlagene Reduzierungsschema wird in GIA verwendet, um die Anzahl der gekoppelten nichtlinearen Differentialgleichungen zu reduzieren. Das Reduzierungsschema verwendet Linearkombinationen von mobilen und immobile Spezies und trennt die reaktionsunabhngigen linearen Differentialgleichungen von den gekoppelten nichtlinearen Gleichungen (dh Verringerung der Anzahl der Primärvariablen des nicht-linearen Gleichungssystems). Um die Gleichgewichtsreaktionen der Mineralien zu berechnen, wurde ein chemischer Gleichungslaser auf Basis von ”semi-smooth Newton-Iterations” implementiert. Ergebnisse von drei Benchmarks wurden zur Code-Verifikation verwendet. Diese Ergebnisse zeigen, dass die Simulation homogener Equilibriumreaktionen mit GIA 6,7 mal schneller und bei kinetischen Reaktionen 24 mal schneller als SNIA sind. Bei Simulationen heterogener Equilibriumreaktionen ist SNIA 4,7 mal schneller als der GIA Ansatz
Macchion, Olivier. « CFD in the design of gas quenching furnace ». Doctoral thesis, Stockholm : Department of Mechanics, Royal Institute of Technology, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-239.
Texte intégralVedin, Jörgen. « Numerical modeling of auroral processes ». Doctoral thesis, Umeå University, Physics, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-1117.
Texte intégralOne of the most conspicuous problems in space physics for the last decades has been to theoretically describe how the large parallel electric fields on auroral field lines can be generated. There is strong observational evidence of such electric fields, and stationary theory supports the need for electric fields accelerating electrons to the ionosphere where they generate auroras. However, dynamic models have not been able to reproduce these electric fields. This thesis sheds some light on this incompatibility and shows that the missing ingredient in previous dynamic models is a correct description of the electron temperature. As the electrons accelerate towards the ionosphere, their velocity along the magnetic field line will increase. In the converging magnetic field lines, the mirror force will convert much of the parallel velocity into perpendicular velocity. The result of the acceleration and mirroring will be a velocity distribution with a significantly higher temperature in the auroral acceleration region than above. The enhanced temperature corresponds to strong electron pressure gradients that balance the parallel electric fields. Thus, in regions with electron acceleration along converging magnetic field lines, the electron temperature increase is a fundamental process and must be included in any model that aims to describe the build up of parallel electric fields. The development of such a model has been hampered by the difficulty to describe the temperature variation. This thesis shows that a local equation of state cannot be used, but the electron temperature variations must be descibed as a nonlocal response to the state of the auroral flux tube. The nonlocal response can be accomplished by the particle-fluid model presented in this thesis. This new dynamic model is a combination of a fluid model and a Particle-In-Cell (PIC) model and results in large parallel electric fields consistent with in-situ observations.
Xie, Jinsong. « Numerical modeling of tsunami waves ». Thesis, University of Ottawa (Canada), 2007. http://hdl.handle.net/10393/27936.
Texte intégralPak, Ali. « Numerical modeling of hydraulic fracturing ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/nq21618.pdf.
Texte intégralVedin, Jörgen. « Numerical modeling of auroral processes / ». Umeå : Dept. of Physics, Umeå Univ, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-1117.
Texte intégralJohansson, Christer. « Numerical methods for waveguide modeling / ». Stockholm : Numerical Analysis and Computing Science (NADA), Stockholm university, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-992.
Texte intégralKim, Chu-p'yŏ. « Numerical modeling of MILD combustion ». Aachen Shaker, 2008. http://d-nb.info/988365464/04.
Texte intégralDePaoli, Laura L. (Laura Lynn) 1975. « Numerical modeling of wetland hydrodynamics ». Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80587.
Texte intégralNigam, Mats S. (Mats Sandje) 1970. « Numerical modeling of suspension flows ». Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/85307.
Texte intégralStathas, Alexandros. « Numerical modeling of earthquake faults ». Thesis, Ecole centrale de Nantes, 2021. http://www.theses.fr/2021ECDN0053.
Texte intégralDuring coseismic slip, the energy released by the elastic unloading of the adjacent earth blocks can be separated in three main parts: The energy that is radiated to the earth’s surface (_ 5% of the whole energy budget), the fracture energy for the creation of new fault surfaces and finally, the energy dissipated inside a region of the fault, with finite thickness, which is called the fault gauge. This region accumulates the majority of the seismic slip. Estimating correctly the width of the fault gauge is of paramount importance in calculating the energy dissipated during the earthquake, the fault’s frictional response, and the conditions for nucleation of the fault in the form of seismic or aseismic slip.In this thesis different regularization approaches were explored for the estimation of the localization width of the fault’s principal slip zone during coseismic slip. These include the application of viscosity and multiphysical couplings in the classical Cauchy continuum, and the introduction of a first order micromorphic Cosserat continuum. First, we focus on the role of viscous regularization in the context of dynamical analyses, as a method for regularizing strain localization. We study the dynamic case for a strain softening strain-rate hardening classical Cauchy continuum, and by applying the Lyapunov stability analysis we show that introduction of viscosity is unable to prevent strain localization on a mathematical plane and mesh dependence.We perform fully non linear analyses using the Cosserat continuum under large seismic slip displacements of the fault gouge in comparison to its width. Cosserat continuum provides us with a proper account of the energy dissipated during an earthquake and the role of the microstructure in the evolution of the fault’s friction. We focus on the influence of the seismic slip velocity to the weakening mechanism of thermal pressurization. We notice that the influence of the boundary conditions in the diffusion of the pore fluid inside the fault gouge, leads to frictional strength regain after initial weakening. Furthermore, a traveling strain localization mode is present during shearing of the layer introducing oscillations in the frictional response. Such oscillations increase the spectral content of the earthquake. Introduction of viscosity in the above mode, leads to a rate and state behavior without the introduction of a specific internal state variable. Our conclusions about the role of thermal pressurization during shearing of the fault gouge, agree qualitatively with newly available experimental results.Finally, based on the numerical findings we investigate the assumptions of the current model of a slip on a mathematical plane, in particular the role of the boundary conditions and strain localization mode in the evolution of the fault’s friction during coseismic slip. The case of a bounded domain and a traveling strain localization mode are examined in the context of slip on a mathematical plane under thermal pressurization. Our results expand the original model in a more general context
Zhou, Jun. « Numerical Modeling of Ductile Fracture ». University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1384774266.
Texte intégralHuang, Chuanshi. « NUMERICAL MODELING OF HYDROGEN EMBRITTLEMENT ». University of Akron / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=akron1588597670254056.
Texte intégralWood, Tamara Michelle. « Numerical modeling of estuarine geochemistry / ». Full text open access at:, 1993. http://content.ohsu.edu/u?/etd,240.
Texte intégralMcGrath, Thomas Peter. « Numerical modeling of multiphase explosions ». College Park, Md. : University of Maryland, 2008. http://hdl.handle.net/1903/8825.
Texte intégralThesis research directed by: Dept. of Mechanical Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.
Hadi, Jafari Pantea. « Numerical Modeling of Cyclone Gasification ». Licentiate thesis, Luleå tekniska universitet, Energivetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-70753.
Texte intégralPeeker, Eerik. « Extended numerical modeling of fatigue behavior / ». Lausanne : EPFL, 1997. http://library.epfl.ch/theses/?nr=1617.
Texte intégralKanzaki, Cabrera Takeichi. « Numerical modeling of anisotropic granular media ». Doctoral thesis, Universitat de Girona, 2013. http://hdl.handle.net/10803/133834.
Texte intégralEls materials granulars són sistemes de moltes partícules implicats en diversos processos industrials i en la nostra vida quotidiana. El comportament mecànic de conjunts granulars, com la sorra, grans de cafè, anells o pols planetàries, representa actualment un repte per a la ciència. En els últims anys aquests sistemes s’han estudiat àmpliament de forma experimental, analítica i numèrica. De totes maneres, avui dia es continuen obtenint resultats rellevants, i en moltes ocasions, inesperats. Malgrat el fet que els materials granulars sovint estan compostos per grans amb forma anisotròpica, com l’arròs, les llenties o les píndoles, la majoria dels estudis experimentals i teòrics se centren en partícules esfèriques. L’objectiu d’aquesta tesi ha estat analitzar numèricament el comportament dels mitjans granulars compostos per partícules esfèriques i no esfèriques. Els mètodes numèrics implementats han permès la descripció de les propietats macroscòpiques de piles i columnes granulars, que s’han estudiat experimentalment en el marc dels projectes "Estabilidad y dinámica de medios granulares anisótropos" (FIS2008-06034-C02- 02) de la Universitat de Girona i "Interacciones entre partículas y emergencia de propiedades macroscópicas en medios granulares" (FIS2008-06034-C02- 01) de la Universitat de Navarra
Christy, Clifford T. « Numerical modeling of a propagating crack ». Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1993. http://handle.dtic.mil/100.2/ADA272604.
Texte intégralJade, (B) Sridevi. « Numerical Modeling Of Jointed Rock Mass ». Thesis, Indian Institute of Science, 2000. http://hdl.handle.net/2005/257.
Texte intégralOzkaya, Melike. « Numerical Modeling Of Kizildere Geothermal Field ». Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/12609142/index.pdf.
Texte intégralPolat, Can. « Numerical Modeling Of Balcova Geothermal Field ». Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12611526/index.pdf.
Texte intégralova geothermal field, which is located in the izmir bay area of the Aegean coast. A commercial numerical simulation program, TOUGH2 was utilized with a graphical interface, PETRASIM to model the Balç
ova geothermal field. Natural state modeling of the field was carried out based on the conceptual model of the field, then history matching of production &ndash
injection practices of the field was established for the period of 1996 &ndash
2008. The final stage of modeling was the future performance prediction of the field by using three different Scenarios. In Scenario-1, production and injection rates in year 2008 were repeated for 20 years. In Scenario-2, production and injection rates in year 2008 were repeated for the first 3 years, then they were increased at every 3 years. In Scenario-3, a new well (BT-1) that is assumed to be drilled to 1000 m depth is added for injecting some portion of water that was injected through BD-8 well. In that scenario, similar to Scenario-2, production and injection rates in year 2008 were repeated during the first 3 years, and then the rates of these wells (except the new well) were increased every three years. Analysis of the results indicated that in Scenario-2, compared to Scenario-1, both the temperatures of deep wells located at the eastern portion of the field (BD-6, BD-2, BD-14, BD-9, BD-11, BD-12) and the temperatures of deep wells located at the western portion (BD-4, BD-15, BD-7, BD-5) decreased more. In Scenario-3, compared to Scenario-1, the deep wells located at the eastern side experienced less temperature drops while the deep wells located at the western side experienced higher temperature drops. Such temperature differences were not encountered in shallow wells. No significant changes in bottom hole pressures of deep wells occurred in all three scenarios. On the other hand, shallow wells, especially B-10 and B-5, responded to Scenario-2 and Scenario-3 as decrease in bottom hole pressures.
Gunay, Emre. « Numerical Modeling Of Edremit Geothermal Field ». Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614890/index.pdf.
Texte intégralGuo, Qingchao. « Numerical modeling of suspended sediment transport ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0019/NQ54671.pdf.
Texte intégralPike, Joshua Dennis. « Numerical modeling of soil-geosynthetic interaction ». Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5290.
Texte intégralTitle from document title page. Document formatted into pages; contains xii, 94 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 93-94).
Lee, Wayne Y. « Numerical modeling of blast-induced liquefaction / ». Diss., CLICK HERE for online access, 2006. http://contentdm.lib.byu.edu/ETD/image/etd1431.pdf.
Texte intégralAbed, Ayman A. « Numerical modeling of expansive soil behavior / ». Stuttgart : IGS, 2008. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=016534652&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Texte intégralStåhl, Martin. « Numerical modeling to complement wood tests ». Thesis, Uppsala universitet, Tillämpad mekanik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-207269.
Texte intégralTryckprover på trä har utförts för att ta reda dess egenskaper. Resultaten blev intevad som förväntades, och det blir därför svårt att få fram träets egenskaper. Dettaprojekt undersöker hur en viss defekt i träprovet påverkar resultatet.Tryckprovet simuleras med numerisk modellering. I modellen är kubens toppsida inteparallell med bottensidan, den är med andra ord något sned.Resultatet från modellen stämde med resultat från vissa tryckprover. Då kan man fåfram träets egenskaper. För andra tryckprover kan andra faktorer behöva undersökasinnan man kan dra några slutsatser.
Padhi, Gouri S. « Numerical failure modeling of composite structures ». Thesis, University of Southampton, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.312862.
Texte intégralROCHINHA, FERNANDO ALVES. « MODELING AND NUMERICAL SIMULATION OF RODS ». PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1990. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=20299@1.
Texte intégralFUNDAÇÃO DE APOIO À PESQUISA DO ESTADO DO RIO DE JANEIRO
É apresentado um modelo não-linear para estruturas unidimensionais em equilíbrio, onde não são feitas restrições de caráter geométrico. Este modelo é capaz de descrever movimentos que envolvam flexão, torção, cilhamento e extensão. As configurações de referência e deformada têm sua geometria descrita através da posição espacial de uma curva e da orientação de uma base ortonormal associada a cada ponto dessa curva. O uso dos ângulos de Euler na descrição das rotações, o que pode implicar em instabilidades numéricas, é evitado através do uso de uma nova parametrização para o problema. O problema de equilíbrio que envolve o comportamento não-linear de uma estrutura unidimensional é formulado de diferentes maneiras. São apresentados dois métodos numéricos para a solução desse problema. Um deles é baseado numa decomposição via lagrangeano aumentado e outro é um método de Newton não convencional. São discutidos detalhes acerca da implementação computacional desses métodos. A validade das formulações é atestada através de alguns exemplos numéricos. Em particular. São analisadas algumas aplicações relacionadas com operações de cabos umbilicais em prospecção petrolífera, que envolvem carregamentos estáticos complicados como aqueles ocasionados por flutuadores e pela atração gravitacional.
It is presented a model of the static geometrically non-linear behavior of an elastic rod which considers flexion, torsion, shear and tension. The geometry of the body, in the reference and deformed configurations, is described given the position of the centerline and the geometry of a rigid frame attached to each point of the line. A particular parametrization that avoids the difficulties associated with the use of Euler angles is employed simplifying the numerical treatment. The equilibrium problem for a nonlinear rod is formulated in several different ways and two numerical methods for solution of these problems are presented. One is based on augmented Lagrangian splitting and the second is a non-standard Newton’s method. Details pertaining to the implementation of that method are discussed. A number of numerical simulations have been documented to demonstrate the robustness of the formulations. In particular, some applications in connection with Off shore pipe lines operations, which involves complicated static loading conditions that includes floaters and gravitational forces, are analysed.
Zahedi, Sara. « Numerical Modeling of Fluid Interface Phenomena ». Licentiate thesis, Stockholm : Skolan för datavetenskap och kommunikation, Kungliga Tekniska högskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-10507.
Texte intégralLiu, Alfred D. « Numerical modeling of granular magnetic materials / ». Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2000. http://wwwlib.umi.com/cr/ucsd/fullcit?p9989763.
Texte intégralWang, Chin-Cheng. « Numerical modeling of microscale plasma actuators ». [Gainesville, Fla.] : University of Florida, 2009. http://purl.fcla.edu/fcla/etd/UFE0024818.
Texte intégral