Articles de revues sur le sujet « Non-Standard bending test »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Non-Standard bending test ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
Liu, Chao, Ning Ding, Jingsong Duan, Lili Zhou, Shanfu Cui, Shuna Jiang et Aofei Li. « Precise mathematical model for the ratchet tooth root bending stress ». Mechanical Sciences 12, no 2 (20 décembre 2021) : 1105–13. http://dx.doi.org/10.5194/ms-12-1105-2021.
Texte intégralKalia, Ajit, Juhi Joshi, Mohammed Mandsaurwala, Sayali Bobade et Azmat Azha Khan. « Esthetic nickel titanium wires– Do they deliver the same force ? » IP Indian Journal of Orthodontics and Dentofacial Research 8, no 4 (15 décembre 2022) : 260–66. http://dx.doi.org/10.18231/j.ijodr.2022.045.
Texte intégralChai, Teck Jung, Tan Cher Siang, Tang Hing Kwong et Koh Heng Boon. « Bending Strength of Magnesium Oxide Board ». Key Engineering Materials 879 (mars 2021) : 169–78. http://dx.doi.org/10.4028/www.scientific.net/kem.879.169.
Texte intégralKunecký, Jiří, Václav Sebera, Jan Tippner, Hana Hasníková, Michal Kloiber, Anna Arciszewska-Kędzior et Jaromír Milch. « Mechanical Performance and Contact Zone of Timber Joint With Oblique Faces ». Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 63, no 4 (2015) : 1153–59. http://dx.doi.org/10.11118/actaun201563041153.
Texte intégralKosior-Kazberuk, Marta, et Rafał Wasilczyk. « Influence of static long-term loads and cyclic freezing/thawing on the behaviour of concrete beams reinforced with BFRP and HFRP bars ». MATEC Web of Conferences 174 (2018) : 04013. http://dx.doi.org/10.1051/matecconf/201817404013.
Texte intégralSusanto, Eko, Yulian Maheswara et Akhmad Basuki Widodo. « Bending Strength of Apus Bamboo Fiber Reinforced Asphalt Composite Materials as Small Ship ». BERKALA SAINSTEK 10, no 4 (10 décembre 2022) : 195. http://dx.doi.org/10.19184/bst.v10i4.32604.
Texte intégralVu, Ngoc-Hung, Xuan-Tan Pham, Vincent François et Jean-Christophe Cuillière. « Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science 233, no 17 (7 juillet 2019) : 6167–76. http://dx.doi.org/10.1177/0954406219861126.
Texte intégralDeTora, M., et K. Kraus. « Mechanical testing of 3.5 mm locking and non-locking bone plates ». Veterinary and Comparative Orthopaedics and Traumatology 21, no 04 (2008) : 318–22. http://dx.doi.org/10.3415/vcot-07-04-0034.
Texte intégralConcli, Franco. « Numerical Study of the Impact of Shot Peening on the Tooth Root Fatigue Performances of Gears Using Critical Plane Fatigue Criteria ». Applied Sciences 12, no 16 (18 août 2022) : 8245. http://dx.doi.org/10.3390/app12168245.
Texte intégralFuentes-Talavera, F. J., J. A. Silva-Guzmán, R. Rodríguez-Anda, M. G. Lomelí-Ramírez, R. Sanjuán-Dueñas et H. G. Richter. « Strength properties and natural durability of Avocado (Persea americana Mill.) branch wood ». Madera y Bosques 17, no 1 (30 août 2016) : 37–47. http://dx.doi.org/10.21829/myb.2011.1711153.
Texte intégralMa, Yifan, Yazhi Li et Lu Liu. « Off-Axis Tension Behaviour of Unidirectional PEEK/AS4 Thermoplastic Composites ». Applied Sciences 13, no 6 (9 mars 2023) : 3476. http://dx.doi.org/10.3390/app13063476.
Texte intégralTrinidad-Fernández, Manuel, David Beckwée, Antonio Cuesta-Vargas, Manuel González-Sánchez, Francisco-Angel Moreno, Javier González-Jiménez, Erika Joos et Peter Vaes. « Validation, Reliability, and Responsiveness Outcomes of Kinematic Assessment with an RGB-D Camera to Analyze Movement in Subacute and Chronic Low Back Pain ». Sensors 20, no 3 (27 janvier 2020) : 689. http://dx.doi.org/10.3390/s20030689.
Texte intégralTeder, Marko, Kalle Pilt, Matis Miljan, Vello Pallav et Jaan Miljan. « INVESTIGATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF TIMBER USING ULTRASOUND EXAMINATION ». Journal of Civil Engineering and Management 18, no 6 (20 novembre 2012) : 795–801. http://dx.doi.org/10.3846/13923730.2012.736233.
Texte intégralJin, Ai Hua, et Bai Shou Li. « Research on Axial Behavior of Thin-Walled T-Shaped Steel Stub Columns Filled with Recycled Demolished Concrete Lump ». Advanced Materials Research 690-693 (mai 2013) : 881–85. http://dx.doi.org/10.4028/www.scientific.net/amr.690-693.881.
Texte intégralCasado, Milagros, Luis Acuña, Luis-Alfonso Basterra, Gemma Ramón-Cueto et Daniel Vecilla. « Grading of structural timber of Populus × euramericana clone I-214 ». Holzforschung 66, no 5 (1 juillet 2012) : 633–38. http://dx.doi.org/10.1515/hf-2011-0153.
Texte intégralShmulsky, Rubin, Laurice Mara Spinelli Correa et Franklin Quin. « Strength and stiffness of 3-ply industrial bamboo matting ». BioResources 16, no 3 (1 août 2021) : 6392–400. http://dx.doi.org/10.15376/biores.16.3.6392-6400.
Texte intégralLandowski, Michał, Aleksandra Świerczyńska, Grzegorz Rogalski et Dariusz Fydrych. « Autogenous Fiber Laser Welding of 316L Austenitic and 2304 Lean Duplex Stainless Steels ». Materials 13, no 13 (30 juin 2020) : 2930. http://dx.doi.org/10.3390/ma13132930.
Texte intégralŽivčák, Jozef, Martin Petrík, Radovan Hudák, Teodor Tóth, Dusan Knezo et Eva Kovalova. « Embedded Tensile Strenght Test Machine FM1000 – An Upgrade of Measurement and Control ». Solid State Phenomena 147-149 (janvier 2009) : 657–62. http://dx.doi.org/10.4028/www.scientific.net/ssp.147-149.657.
Texte intégralMay, Nguyen Huu, Huynh Trong Phuoc, Le Thanh Phieu, Ngo Van Anh, Chau Minh Khai et Le Nong. « Recycling of waste incineration bottom ash in the production of interlocking concrete bricks ». Journal of Science and Technology in Civil Engineering (STCE) - NUCE 15, no 2 (15 avril 2021) : 101–12. http://dx.doi.org/10.31814/stce.nuce2021-15(2)-09.
Texte intégralŠmídová, Eliška, et Petr Kabele. « CONSTITUTIVE MODEL FOR TIMBER FRACTURE USED FOR FE SIMULATION OF LVL ARCH ». Acta Polytechnica CTU Proceedings 15 (31 décembre 2018) : 109–13. http://dx.doi.org/10.14311/app.2018.15.0109.
Texte intégralPokorska, Iwona, Mariusz Poński, Wojciech Kubissa, Tomasz Libura, Adam Brodecki et Zbigniew Kowalewski. « Computational Fracture Evolution Analysis of Steel-Fiber-Reinforced Concrete Using Concrete Continuous Damage and Fiber Progressive Models ». Materials 16, no 16 (15 août 2023) : 5635. http://dx.doi.org/10.3390/ma16165635.
Texte intégralSkarzynski, Ł., et J. Tejchman. « Numerical Mesoscopic Analysis of Fracture in Fine-Grained Concrete ». Archives of Civil Engineering 58, no 3 (1 septembre 2012) : 331–61. http://dx.doi.org/10.2478/v.10169-012-0019-7.
Texte intégralCarreira, Marcelo Rodrigo, Pedro Gutemberg de Alcântara Segundinho, Fabricio Gomes Gonçalves, Juarez Benigno Paes, Antônio Alves Dias, Pedro Nicó de Medeiros Neto, Leonor da Cunha Mastela et Yonny Martinez Lopez. « Influence of moisture content on the dynamic modulus of elasticity ». Research, Society and Development 11, no 11 (21 août 2022) : e232111133687. http://dx.doi.org/10.33448/rsd-v11i11.33687.
Texte intégralJamshidi Avanaki, Mohammad, Mohammad Abedi et Abdollah Hoseini. « Stress-Strain Constitutive Material Models for Hybrid Steel Fiber Reinforced Concrete ». Journal of Civil Engineering and Construction 9, no 2 (15 mai 2020) : 74–82. http://dx.doi.org/10.32732/jcec.2020.9.2.74.
Texte intégralCho, Seong-Mook, Brian G. Thomas, Jong-Yeon Hwang, Jong-Geun Bang et Il-Sin Bae. « Modeling of Inclusion Capture in a Steel Slab Caster with Vertical Section and Bending ». Metals 11, no 4 (17 avril 2021) : 654. http://dx.doi.org/10.3390/met11040654.
Texte intégralYan, Zhao. « Research New Waterproof Agent of the Particleboard ». Advanced Materials Research 960-961 (juin 2014) : 43–46. http://dx.doi.org/10.4028/www.scientific.net/amr.960-961.43.
Texte intégralSimegnaw, Abdella Ahmmed, Yetanawork Teyeme, Benny Malengier, Tamrat Tesfaye, Hundessa Daba, Kaledawit Esmelealem et Lieva Van Langenhove. « Smart Shirt for Measuring Trunk Orientation ». Sensors 22, no 23 (23 novembre 2022) : 9090. http://dx.doi.org/10.3390/s22239090.
Texte intégralSauri, Fauzan, et Mulianti Mulianti. « The Effect of Preheating and Non-Preheating in Cast Iron Welding Toward Mechanical Properties ». Teknomekanik 3, no 2 (10 décembre 2020) : 70–74. http://dx.doi.org/10.24036/teknomekanik.v3i2.7272.
Texte intégralBahtiar, Effendi Tri, Erizal Erizal, Dede Hermawan, Naresworo Nugroho et Rizky Hidayatullah. « Experimental Study of Beam Stability Factor of Sawn Lumber Subjected to Concentrated Bending Loads at Several Points ». Forests 13, no 9 (14 septembre 2022) : 1480. http://dx.doi.org/10.3390/f13091480.
Texte intégralZhang, Qin, Song Mao, Mao Jiang, Xiao Dong Chen et Wei Cheng. « Experiment on Decarburization of High Carbon Fly Ash and Preparation of Concrete ». Advanced Materials Research 881-883 (janvier 2014) : 1250–54. http://dx.doi.org/10.4028/www.scientific.net/amr.881-883.1250.
Texte intégralSuwanasri, Cattareeya, Thanapong Suwanasri et Phanupong Fuangpian. « Investigation on Partial Discharge of Power Cable Termination Defects using High Frequency Current Transformer ». ECTI Transactions on Electrical Engineering, Electronics, and Communications 12, no 1 (19 novembre 2013) : 16–23. http://dx.doi.org/10.37936/ecti-eec.2014121.170810.
Texte intégralvan Blokland, Joran, Stergios Adamopoulos et Sheikh Ali Ahmed. « Performance of Thermally Modified Spruce Timber in Outdoor Above-Ground Conditions : Checking, Dynamic Stiffness and Static Bending Properties ». Applied Sciences 10, no 11 (8 juin 2020) : 3975. http://dx.doi.org/10.3390/app10113975.
Texte intégralKrzosek, Sławomir, Marek Grześkiewicz, Izabela Burawska Kupniewska, Piotr Mańkowski et Marek Wieruszewski. « MECHANICAL PROPERTIES OF POLISH-GROWN PINUS SYLVESTRIS L. STRUCTURAL SAWN TIMBER FROM THE BUTT, MIDDLE AND TOP LOGS ». WOOD RESEARCH 66(2) : 2021 66, no 2 (30 avril 2021) : 231–42. http://dx.doi.org/10.37763/wr.1336-4561/66.2.231242.
Texte intégralAdamczak-Bugno, Anna, Grzegorz Świt et Aleksandra Krampikowska. « Fibre-Cement Panel Ventilated Façade Smart Control System ». Materials 14, no 17 (5 septembre 2021) : 5076. http://dx.doi.org/10.3390/ma14175076.
Texte intégralZhang, Hou Jiang, Lei Zhu, Yan Liang Sun, Xi Ping Wang et Hai Cheng Yan. « Determining Modulus of Elasticity of Ancient Structural Timber ». Advanced Materials Research 217-218 (mars 2011) : 407–12. http://dx.doi.org/10.4028/www.scientific.net/amr.217-218.407.
Texte intégralGajewski, Tomasz, Tomasz Garbowski, Natalia Staszak et Małgorzata Kuca. « Crushing of Double-Walled Corrugated Board and Its Influence on the Load Capacity of Various Boxes ». Energies 14, no 14 (17 juillet 2021) : 4321. http://dx.doi.org/10.3390/en14144321.
Texte intégralFu, Baofei, Chenzhuo Li, Bo Dong et Pan Ou. « Enhanced Digital Gradient Sensing Using Backlight Digital Speckle Target ». Sensors 20, no 22 (17 novembre 2020) : 6557. http://dx.doi.org/10.3390/s20226557.
Texte intégralİşleyen, Ümmü K., Rahim Ghoroubi, Ömer Mercimek, Özgür Anil et Recep Tuğrul Erdem. « Behavior of glulam timber beam strengthened with carbon fiber reinforced polymer strip for flexural loading ». Journal of Reinforced Plastics and Composites 40, no 17-18 (9 avril 2021) : 665–85. http://dx.doi.org/10.1177/0731684421997924.
Texte intégralRakhmanov, V. A., V. I. Melikhov et A. A. Safonov. « Wind loads tests of external walls blocks masonry of noncombustible polystyrene concrete ». Concrete and Reinforced Concrete 617, no 3 (31 juillet 2023) : 15–23. http://dx.doi.org/10.37538/0005-9889-2023-3(617)-15-23.
Texte intégralAhmad, Bilal, et Xiangfan Fang. « Modeling Shear Behavior of Woven Fabric Thermoplastic Composites for Crash Simulations ». Applied Composite Materials 27, no 6 (20 novembre 2020) : 739–65. http://dx.doi.org/10.1007/s10443-020-09844-0.
Texte intégralLolli, S., A. Hidalgo, C. Alamprese, V. Ferrante et M. Rossi. « Layer performances, eggshell characteristics and bone strength in three different housing systems ». Biotehnologija u stocarstvu 29, no 4 (2013) : 591–606. http://dx.doi.org/10.2298/bah1304591l.
Texte intégralSubramanya, N., A. R. Satheesh Kumar, D. G. Visakh et K. Balasubramanya. « Certification of welder for tungsten inert gas welding in unmanned aerial vehicle systems ». IOP Conference Series : Materials Science and Engineering 1291, no 1 (1 septembre 2023) : 012036. http://dx.doi.org/10.1088/1757-899x/1291/1/012036.
Texte intégralBui, Tien Thanh, Guido De Roeck, Jeroen Van Wittenberghe, Patrick De Baets et Wim De Waele. « Fatigue damage identification in threaded connection of tubular structures through in-situ modal tests ». International Journal Sustainable Construction & ; Design 2, no 2 (6 novembre 2011) : 207–2016. http://dx.doi.org/10.21825/scad.v2i2.20518.
Texte intégralBhanushali, J. D., et M. Nithyadharan. « Experimental studies on fiber cement boards under compression loading ». Proceedings of the 12th Structural Engineering Convention, SEC 2022 : Themes 1-2 1, no 1 (19 décembre 2022) : 179–86. http://dx.doi.org/10.38208/acp.v1.492.
Texte intégralKauniste, Maarja, Alar Just, Eero Tuhkanen et Targo Kalamees. « Assessment on Strength and Stiffness Properties of Aged Structural Timber ». Journal of Sustainable Architecture and Civil Engineering 34, no 1 (19 février 2024) : 62–74. http://dx.doi.org/10.5755/j01.sace.34.1.35534.
Texte intégralCarvalho, Ronaldo Lúís Almeida de, Estevão Tomomitsu Kimpara, Eduardo Bresciani, Márcia Carneiro Valera et Renata Marques Melo. « Effect of thermocycling aging on the flexural strength of feldspathic ceramic ». Brazilian Dental Science 21, no 3 (1 août 2018) : 315. http://dx.doi.org/10.14295/bds.2018.v21i3.1554.
Texte intégralFajrin, Jauhar, Ni Nyoman Kencanawati, Miko Eniarti et Arismanto Arismanto. « Core Configuration Effect On The Flexural Behaviour Of Sandwich Panel Made Of Aluminium Skin And Sengon Wood Core ». Jurnal Rekayasa Sipil (JRS-Unand) 17, no 3 (26 février 2022) : 186. http://dx.doi.org/10.25077/jrs.17.3.186-193.2021.
Texte intégralAl-Qahtani, Amal S., Huda I. Tulbah, Mashael Binhasan, Maria S. Abbasi, Naseer Ahmed, Sara Shabib, Imran Farooq et al. « Surface Properties of Polymer Resins Fabricated with Subtractive and Additive Manufacturing Techniques ». Polymers 13, no 23 (24 novembre 2021) : 4077. http://dx.doi.org/10.3390/polym13234077.
Texte intégralMoh, Eun Ho, Kyo Shik Park, Jeong Woo Jo et Myeong Hui Yu. « A Study on the Improvement of Safety Management by Improving the Production Quality of PC(Precast Concrete) : PC Slab Falling Accident in Construction of Logistics Warehouse ». Forum of Public Safety and Culture 19 (30 novembre 2022) : 15–30. http://dx.doi.org/10.52902/kjsc.2022.19.15.
Texte intégralMikoliūnas, Audrius, et Rimantas Kačianauskas. « STIFFNESS CHARACTERISTICS OF GEOMETRICALLY NON-LINEAR BEAM FINITE ELEMENT/GEOMETRIŠKAI NETIESINIO LENKIAMO STRYPO BAIGTINIO ELEMENTO STANDUMO RODIKLIŲ NUSTATYMAS ». JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT 3, no 10 (30 juin 1997) : 52–59. http://dx.doi.org/10.3846/13921525.1997.10531684.
Texte intégral