Bibliographies thématiques / NANOCOMPOSITE AND PEDOT: PSS / Articles de revues

Articles de revues sur le sujet « NANOCOMPOSITE AND PEDOT: PSS »

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : NANOCOMPOSITE AND PEDOT: PSS.
Auteur : Grafiati
Publié le 11 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « NANOCOMPOSITE AND PEDOT: PSS ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

SONG, DANDAN, MEICHENG LI, FAN BAI, YINGFENG LI, YONGJIAN JIANG et BING JIANG. « SILICON NANOPARTICLES/PEDOT–PSS NANOCOMPOSITE AS AN EFFICIENT COUNTER ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS ». Functional Materials Letters 06, no 04 (août 2013) : 1350048. http://dx.doi.org/10.1142/s1793604713500483.

Texte intégral
Résumé :
A novel inorganic/organic nanocomposite film composed of Si nanoparticles (NPs) and poly-(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT–PSS) is obtained from a simple mechanical mixture of Si NPs powder and aqueous PEDOT–PSS solution. Employing this composite film as a counter electrode, dye-sensitized solar cell (DSSC) exhibits an efficiency of 5.7% and a fill factor of 0.51, which are much higher than these of DSSC using pristine PEDOT–PSS electrode (2.9% and 0.25, respectively). The improvements in the photovoltaic performance of the former are primarily derived from improved electrocatalytic performance of the electrode, as evidenced by electrochemical measurements, the composite electrode has lower impedance and higher electrocatalytic activity when in comparison with pristine PEDOT–PSS electrode. These improvements are primarily deriving from the increased electrochemical surface by the addition of Si NPs. The characteristics of Si NPs/PEDOT–PSS composite counter electrode reveal its potential for the use of low-cost and stable Pt-free counter electrode materials. In addition, the results achieved in this work also provide a facile and efficient approach to improve the photovoltaic performance of DSSCs using PEDOT–PSS electrodes.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Dehsari, Hamed Sharifi, Jaber Nasrollah Gavgani, Amirhossein Hasani, Mojtaba Mahyari, Elham Khodabakhshi Shalamzari, Alireza Salehi et Farmarz Afshar Taromi. « Copper(ii) phthalocyanine supported on a three-dimensional nitrogen-doped graphene/PEDOT-PSS nanocomposite as a highly selective and sensitive sensor for ammonia detection at room temperature ». RSC Advances 5, no 97 (2015) : 79729–37. http://dx.doi.org/10.1039/c5ra13976g.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ummartyotin, S., J. Juntaro, C. Wu, M. Sain et H. Manuspiya. « Deposition of PEDOT : PSS Nanoparticles as a Conductive Microlayer Anode in OLEDs Device by Desktop Inkjet Printer ». Journal of Nanomaterials 2011 (2011) : 1–7. http://dx.doi.org/10.1155/2011/606714.

Texte intégral
Résumé :
A simple microfabrication technique for delivering macromolecules and patterning microelectrode arrays using desktop inkjet printer was described. Aqueous solution of nanoparticle of poly (3,4-ethylenedioxythiophene) (PEDOT) doped with polystyrene sulfonic acid (PSS) was prepared while its particle size, the surface tension, and the viscosity of the solution were adjusted to be suitable for deposition on a flexible cellulose nanocomposite substrate via inkjet printer. The statistical average of PEDOT: PSS particle size of 100 nm was observed. The microthickness, surface morphology, and electrical conductivity of the printed substrate were then characterized by profilometer, atomic force microscope (AFM), and four-point probe electrical measurement, respectively. The inkjet deposition of PEDOT: PSS was successfully carried out, whilst retained its transparency feature. Highly smooth surface (roughness ~23–44 nm) was achieved.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Pisesweerayos, Prasit, Somsak Dangtip, Pitt Supaphol et Toemsak Srikhirin. « Conductive Nanocomposite Aligned Fibers of PVA-AgNPs-PEDOT/PSS ». Advanced Materials Research 1033-1034 (octobre 2014) : 1009–19. http://dx.doi.org/10.4028/www.scientific.net/amr.1033-1034.1009.

Texte intégral
Résumé :
Poly (vinyl alcohol)-silver nanoparticles (PVA:AgNPs), and poly (vinyl alcohol)-silver nanoparticles-poly (3, 4-ethylene dioxythiophene)/poly (styrene sulfonate) (PVA:AgNPs: PEDOT/ PSS) were generated as ultra-fine electrospun fibers using the aligned fiber mat and aligned single fiber techniques. SEM and TEM were used to confirm the morphology, diameter size, and fiber alignment of the ultra-fine fibers. A two-probe technique was utilized to assess the electrical conductivity of the ultrafine fibers. The highest conductivity of PVA:AgNPs, (10 %w/v:0.75 %w/v) with a fiber diameter of 0.152 μm, with voltage applied at 17.5 kV within a 20 min collection period in the electrospinning process, was 43.20 S/cm; whereas the highest conductivity of PVA:AgNPs: PEDOT/PSS, (10 %w/v:0.25 %w/v:0.084 %w/v), with a fiber diameter of 0.158 μm and voltage applied at 17.5 kV within a 45 min collection period in the electrospinning process, was 92.18 S/cm.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Khasim, Syed, Apsar Pasha, Nacer Badi, Mohana Lakshmi et Yogendra Kumar Mishra. « High performance flexible supercapacitors based on secondary doped PEDOT–PSS–graphene nanocomposite films for large area solid state devices ». RSC Advances 10, no 18 (2020) : 10526–39. http://dx.doi.org/10.1039/d0ra01116a.

Texte intégral
Résumé :
In this work, we propose the development of high performance and flexible supercapacitors using reduced graphene oxide (rGO) incorporated poly(3,4 ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT–PSS) nanocomposites by secondary doping.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Khasim, Syed, Apsar Pasha, Nacer Badi, Adnen Ltaief, S. A. Al-Ghamdi et Chellasamy Panneerselvam. « Expression of concern : Design and development of highly sensitive PEDOT-PSS/AuNP hybrid nanocomposite-based sensor towards room temperature detection of greenhouse methane gas at ppb level ». RSC Advances 13, no 13 (2023) : 8719. http://dx.doi.org/10.1039/d3ra90018e.

Texte intégral
Résumé :
Expression of concern for ‘Design and development of highly sensitive PEDOT-PSS/AuNP hybrid nanocomposite-based sensor towards room temperature detection of greenhouse methane gas at ppb level’ by Syed Khasim et al., RSC Adv., 2021, 11, 15017–15029. DOI https://doi.org/10.1039/D1RA00994J.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Park, Eun-Soo. « Preparation and morphology of electroconductive PEDOT/PSS/ATO nanocomposite microsphere ». Polymer Composites 36, no 7 (19 avril 2014) : 1352–64. http://dx.doi.org/10.1002/pc.23040.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Hegde, Roopa, Koona Ramji, Swapna Peravali, Yallappa Shiralgi, Gurumurthy Hegde et Lavakumar Bathini. « Characterization of MWCNT-PEDOT : PSS Nanocomposite Flexible Thin Film for Piezoresistive Strain Sensing Application ». Advances in Polymer Technology 2019 (10 juin 2019) : 1–9. http://dx.doi.org/10.1155/2019/9320976.

Texte intégral
Résumé :
Multiwalled carbon nanotubes (MWCNTs) were synthesized by the reduction of ethyl alcohol with sodium borohydride (NaBH4) under a strong basic solvent with the high concentration of sodium hydroxide (NaOH). Nanocomposites of different concentration of MWCNT dispersed in poly(3,4-ethylene dioxythiophene) polymerized with poly(4-styrene sulfonate) (PEDOT:PSS) were prepared and deposited on a flexible polyethylene terephthalate (PET) polymer substrates by the spin coating method. The thin films were characterized for their nanostructure and subsequently evaluated for their piezoresistive response. The films were subjected to an incremental strain from 0 to 6% at speed of 0.2 mm/min. The nanocomposite thin film with 0.1 wt% of MWCNT exhibits the highest gauge factor of 22.8 at 6% strain as well as the highest conductivity of 13.5 S/m. Hence, the fabricated thin film was found to be suitable for piezoresistive flexible strain sensing applications.
Styles APA, Harvard, Vancouver, ISO, etc.
9

E. Amr, Abd, Mohamed Al-Omar, Ayman H. Kamel et Elsayed A. Elsayed. « Single-Piece Solid Contact Cu2+-Selective Electrodes Based on a Synthesized Macrocyclic Calix[4]arene Derivative as a Neutral Carrier Ionophore ». Molecules 24, no 5 (6 mars 2019) : 920. http://dx.doi.org/10.3390/molecules24050920.

Texte intégral
Résumé :
Herein, a facile route leading to good single-walled carbon nanotubes (SWCNT) dispersion or poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) based single-piece nanocomposite membrane is proposed for trace determination of Cu2+ ions. The single-piece solid contact Cu2+-selective electrodes were prepared after drop casting the membrane mixture on the glassy-carbon substrates. The prepared potentiometric sensors revealed a Nernstian response slope of 27.8 ± 0.3 and 28.1 ± 0.4 mV/decade over the linearity range 1.0 × 10−3 to 2.0 × 10−9 and 1.0 × 10−3 to 1.0 × 10−9 M with detection limits of 5.4 × 10−10 and 5.0 × 10−10 M for sensors based on SWCNTs and PEDOT/PSS, respectively. Excellent long-term potential stability and high hydrophobicity of the nanocomposite membrane are recorded for the prepared sensors due to the inherent high capacitance of SWCNT used as a solid contact material. The sensors exhibited high selectivity for Cu2+ ions at pH 4.5 over other common ions. The sensors were applied for Cu2+ assessment in tap water and different tea samples. The proposed sensors were robust, reliable and considered as appealing sensors for copper (II) detection in different complex matrices.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Gavgani, Jaber Nasrollah, Hamed Sharifi Dehsari, Amirhossein Hasani, Mojtaba Mahyari, Elham Khodabakhshi Shalamzari, Alireza Salehi et Farmarz Afshar Taromi. « A room temperature volatile organic compound sensor with enhanced performance, fast response and recovery based on N-doped graphene quantum dots and poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) nanocomposite ». RSC Advances 5, no 71 (2015) : 57559–67. http://dx.doi.org/10.1039/c5ra08158k.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
11

Zhang, Chuanxiang, Hao Huang, Jie Zhou, Changchun Hu, Shuo Li, Dan Wei, Yimin Tan et Yan Deng. « A Sensitive Electrochemical Aptasensor Based on Black Phosphorus Nanosheet for Carbaryl Detection ». Science of Advanced Materials 14, no 12 (1 décembre 2022) : 1836–44. http://dx.doi.org/10.1166/sam.2022.4394.

Texte intégral
Résumé :
Carbaryl is a broad-spectrum carbamate insecticide widely used to control pests on crops, trees and ornamental plants. Carbaryl residues in fruits and vegetables and other foods can accumulate in the human body and damage human health. Therefore, it is very essential to establish a sensitive and reliable method for determination of carbaryl. Black phosphorene nanosheets (BPNPs) modified glassy carbon electrode was herein prepared using poly(3,4-dioxyethylenethiophene)-poly(styrene sulfonate) (PEDOT: PSS) as both membrane and stabilizer. The nanocomposites (BP-PEDOT: PSS) were synthesized by combining BP at the ratio of PEDOT: PSS, which improved conductivity and stability of BP. In order to enhance the electrochemical signal and build the carbaryl aptamer sensor, the surface of BP-PEDOT: PSS was modified by Au nanoparticles (Au NPs). The carbaryl aptamer modified with sulfhydryl groups was immobilized in the outer layer of Au NPs, and the target carbaryl was specifically recognized and captured by carbaryl aptamer and adsorbed on the electrode surface, thus causing changes in the interfacial electrochemical signal. The conditions were optimized and characterized by cyclic voltammetry (CV), and linear equation was obtained as ΔI(μA) = −11.35logC−29.70, R2 = 0.997. The detection range was 0.01 ng/mL–10 μg/mL, with a limit of detection of 7.0 pg/mL.
Styles APA, Harvard, Vancouver, ISO, etc.
12

Sun, Dong Cheng, et De Sheng Sun. « The synthesis and characterization of electrical and magnetic nanocomposite : PEDOT/PSS–Fe3O4 ». Materials Chemistry and Physics 118, no 2-3 (décembre 2009) : 288–92. http://dx.doi.org/10.1016/j.matchemphys.2009.07.060.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
13

Baruah, Bhagyalakhi, et Ashok Kumar. « Electrocatalytic Acitivity of rGO/PEDOT : PSS Nanocomposite towards Methanol Oxidation in Alkaline Media ». Electroanalysis 30, no 9 (7 juin 2018) : 2131–44. http://dx.doi.org/10.1002/elan.201800086.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
14

Pisesweerayos, Prasit, Somsak Dangtip, Pitt Supaphol et Toemsak Srikhirin. « Electrically Conductive Ultrafine Fibers of PVA-PEDOT/PSS and PVA-AgNPs by Means of Electrospinning ». Advanced Materials Research 1033-1034 (octobre 2014) : 1024–35. http://dx.doi.org/10.4028/www.scientific.net/amr.1033-1034.1024.

Texte intégral
Résumé :
This research project produced two fabricated ultrafine conductive polymeric fibers. The first fiber was fabricated from a polymer and conductive polymer solution, and the second was fabricated from a polymer and metal nanoparticle/ nanocomposite. The resulting fibers were characterized and analyzed. For all fiber samples, the ultrafine polymeric fibers were fabricated using polyvinyl alcohol (PVA). The conductive polymer used in the first fiber sample was poly (3,4-ethylenedioxythiophene)/ polystyrene sulfonate (PEDOT/PSS). The conductive nanoparticles used in the second fiber sample were silver nanoparticles (AgNPs). The ultrafine conductive polymer fibers and the ultrafine conductive nanoparticle fibers were fabricated using an electrospining process. During the fabrication process of each fiber sample, different concentrations of either PEDOT/PSS, for fiber sample one, or AgNPs, for fiber sample two, were combined in PVA solution. Using optimal conditions, ultrafine fibers were fabricated at intervals of 5 min for the creation of random fibers, and intervals of 20 min for the creation of aligned fiber mats. The resulting fibers ranged from 0.1 μm to 0.2 μm in diameter. After characterization and analysis of the conductive ultrafine polymeric fibers, using either the PVA:PEDOT/PSS compound or the PVA:AgNPs compound, both samples produced greater conductive capacities with greater concentrations of solution. For the random fiber samples, the conductive capacity was sporadic. However, the ultrafine fiber mats (PVA:AgNPs) supported a capacity from 3.64 S/cm to 10.64 S/cm, and the PVA:PEDOT/PSS ultrafine fiber mats supported a capacity from 4.49 S/cm to 7.08 S/cm.
Styles APA, Harvard, Vancouver, ISO, etc.
15

Chi, Le Ha. « Electrical and Optical Properties of the Hybrid TiO\(_{2}\) Nanocrystals - MEH-PPV Thin Films ». Communications in Physics 19, no 4 (31 décembre 2009) : 243–48. http://dx.doi.org/10.15625/0868-3166/19/4/6410.

Texte intégral
Résumé :
Recently, the conjugated polymer -- inorganic nanocomposites have been increasingly studied because of their enhanced optical and electronic properties as well as their potential application in developing optoelectronic devices. In this study nanocomposite materials thin films based on poly [2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and nanocrystalline TiO\(_{2}\) (nc-TiO\(_{2}\)) have been fabricated. The photoluminescence (PL) spectra of pure MEH-PPV and nanohybrid films have shown that the excitation at a 377 nm wavelength leads to the strongly enhanced performance in photoluminescent intensity due to the compositions of TiO\(_{2}\) component. Current-voltage (I-V) characteristics of multi-layer device Al//MEH-PPV:nc-TiO\(_{2}\)//PEDOT: PSS//ITO//glass were investigated. The results show that the hybrid MEH-PPV:nc-TiO\(_{2}\) materials with high concentrations of TiO\(_{2}\) (>25%) can be expected to be a good candidate for photovoltaic solar cell applications whereas those with lower concentrations of TiO\(_{2}\) are more suitable for organic light-emitting diodes (OLEDs).
Styles APA, Harvard, Vancouver, ISO, etc.
16

Khasim, Syed, Apsar Pasha, Nacer Badi, Adnen Ltaief, S. A. Al-Ghamdi et Chellasamy Panneerselvam. « Design and development of highly sensitive PEDOT-PSS/AuNP hybrid nanocomposite-based sensor towards room temperature detection of greenhouse methane gas at ppb level ». RSC Advances 11, no 25 (2021) : 15017–29. http://dx.doi.org/10.1039/d1ra00994j.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
17

Alreda, Baraa Abd, et Shaymaa Hadi Al-Rubaye. « Study of Electrochemical Properties of NiCo2O4/ Reduced Graphene Oxide / PEDOT:PSS Ternary Nanocomposite for High Performance Supercapacitor Electrode ». NeuroQuantology 19, no 8 (4 septembre 2021) : 77–83. http://dx.doi.org/10.14704/nq.2021.19.8.nq21116.

Texte intégral
Résumé :
A two-step procedure is used to create a novel ternary composite NiCo2O4 hexagonalnanoplatesarray/ reducedgrapheneoxide/poly(3,4ethylenedioxythiophene): poly (styrene-sulfonate) (NiCo2O4-rGO/PEDOT:PSS). It was tested to see if it might be used in super capacitor electrode materials. According to electrochemical testing, the NiCo2O4-rGO-PEDOT. PSS materials has a great exact capacitance of 1115 Fg.1 on a current compactness of 2 Ag-1, decent rate ability, and excellent cycle stability, with capacitance retention of 88 percent after 10000 cycles. As a consequence, this ternary composite may find use in a variety of energy storage electrodes.
Styles APA, Harvard, Vancouver, ISO, etc.
18

Wang, Guang Feng, Xiao Ming Tao, Wei Chen, Rong Xin Wang et Pu Xue. « Study of OLEDs with Nanocomposites of MWNT Modified PEDOT : PSS ». Key Engineering Materials 334-335 (mars 2007) : 861–64. http://dx.doi.org/10.4028/www.scientific.net/kem.334-335.861.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Phongphut, A., C. Sriprachuabwong, A. Wisitsoraat, A. Tuantranont, S. Prichanont et P. Sritongkham. « A disposable amperometric biosensor based on inkjet-printed Au/PEDOT-PSS nanocomposite for triglyceride determination ». Sensors and Actuators B : Chemical 178 (mars 2013) : 501–7. http://dx.doi.org/10.1016/j.snb.2013.01.012.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
20

Lim, Byung Chul, Bal Sydulu Singu, Sang Eun Hong, Yang Ho Na et Kuk Ro Yoon. « Synthesis and characterization nanocomposite of polyacrylamide-rGO-Ag-PEDOT/PSS hydrogels by photo polymerization method ». Polymers for Advanced Technologies 27, no 3 (22 septembre 2015) : 366–73. http://dx.doi.org/10.1002/pat.3648.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
21

Safari, Zeinab, Mahmood Borhani Zarandi, Antonella Giuri, Francesco Bisconti, Sonia Carallo, Andrea Listorti, Carola Esposito Corcione, Mohamad Reza Nateghi, Aurora Rizzo et Silvia Colella. « Optimizing the Interface between Hole Transporting Material and Nanocomposite for Highly Efficient Perovskite Solar Cells ». Nanomaterials 9, no 11 (16 novembre 2019) : 1627. http://dx.doi.org/10.3390/nano9111627.

Texte intégral
Résumé :
The performances of organometallic halide perovskite-based solar cells severely depend on the device architecture and the interface between each layer included in the device stack. In particular, the interface between the charge transporting layer and the perovskite film is crucial, since it represents both the substrate where the perovskite polycrystalline film grows, thus directly influencing the active layer morphology, and an important site for electrical charge extraction and/or recombination. Here, we focus on engineering the interface between a perovskite-polymer nanocomposite, recently developed by our group, and different commonly employed polymeric hole transporters, namely PEDOT: PSS [poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)], PEDOT, PTAA [poly(bis 4-phenyl}{2,4,6-trimethylphenyl}amine)], Poly-TPD [Poly(N,N′-bis(4-butylphenyl)-N,N′-bis(phenyl)-benzidine] Poly-TPD, in inverted planar perovskite solar cell architecture. The results show that when Poly-TPD is used as the hole transfer material, perovskite film morphology improved, suggesting an improvement in the interface between Poly-TPD and perovskite active layer. We additionally investigate the effect of the Molecular Weight (MW) of Poly-TPD on the performance of perovskite solar cells. By increasing the MW, the photovoltaic performances of the cells are enhanced, reaching power conversion efficiency as high as 16.3%.
Styles APA, Harvard, Vancouver, ISO, etc.
22

Tung, Tran Thanh, Tae Young Kim, Hyun Wook Lee, Earl Kim, Tae Hee Lee et Kwang S. Suh. « Conducting Nanocomposites Derived from Poly(styrenesulfonate)-Functionalized MWCNT-PSS and PEDOT ». Journal of The Electrochemical Society 156, no 12 (2009) : K218. http://dx.doi.org/10.1149/1.3231486.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
23

Wang, Xi Chang, et Xin Li. « Core-Shell Structured Nanocomposites with Electromagnetic Properties ». Advanced Materials Research 785-786 (septembre 2013) : 607–12. http://dx.doi.org/10.4028/www.scientific.net/amr.785-786.607.

Texte intégral
Résumé :
The electromagnetic nanocomposites with a core-shell structure are synthesized by in situ chemical oxidative polymerization. The Co doped Fe3O4magnetic particles (Co-Fe3O4) act as the core and poly (3,4-ethylenedioxythiophene)-poly (sodium-p-styrenesulfonate) (PEDOT-PSS) as the conductive polymer shells. The morphology, structure, crystallinity, conductive and magnetic properties were studied by transmission electron microscopy (TEM), Scanning electron Microscope (SEM), Fourier Transform Infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), four-probe conductivity meter and vibrating sample magnetometer (VSM). It is found that the core-shell nanocomposites exhibit controllable electromagnetic properties by adjusting the molar ratio of Co-Fe3O4to EDOT monomer.
Styles APA, Harvard, Vancouver, ISO, etc.
24

Badi, Nacer, Syed Khasim, Ayshah S. Alatawi, Apsar Pasha, Saleh Ahmad Al-Ghamdi et Alex Ignatiev. « Fabrication and Testing Of PEDOT : PSS Wrapped WO2/Au Ternary Nanocomposite Electrodes for High Performance Flexible Supercapacitor Applications ». Journal of The Electrochemical Society 168, no 4 (1 avril 2021) : 040526. http://dx.doi.org/10.1149/1945-7111/abf509.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Rattan, Sunita. « Mdification Of Poly(3,4-Ethylenedioxy Thiophene)/Poly(4-Styrene Sulphonate) (PEDOT : PSS)/Nanographit Nanocomposite Through Ion Beam Technique ». Advanced Materials Letters 5, no 12 (1 décembre 2014) : 712–16. http://dx.doi.org/10.5185/amlett.2014.nib504.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
26

Ram, Jagjeevan, R. G. Singh, F. Singh, Vishnu Chauhan, Deepika Gupta, Vikas Kumar, Utkarsh Kumar, B. C. Yadav et Rajesh Kumar. « Ion beam engineering in WO3-PEDOT : PSS hybrid nanocomposite thin films for gas sensing measurement at room temperature ». Inorganic Chemistry Communications 119 (septembre 2020) : 108000. http://dx.doi.org/10.1016/j.inoche.2020.108000.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

Zhou, Jian, et Gilles Lubineau. « Improving Electrical Conductivity in Polycarbonate Nanocomposites Using Highly Conductive PEDOT/PSS Coated MWCNTs ». ACS Applied Materials & ; Interfaces 5, no 13 (25 juin 2013) : 6189–200. http://dx.doi.org/10.1021/am4011622.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
28

Alam, Kazi M., Piyush Kar, Ujwal K. Thakur, Ryan Kisslinger, Najia Mahdi, Arash Mohammadpour, Payal A. Baheti, Pawan Kumar et Karthik Shankar. « Remarkable self-organization and unusual conductivity behavior in cellulose nanocrystal-PEDOT : PSS nanocomposites ». Journal of Materials Science : Materials in Electronics 30, no 2 (19 décembre 2018) : 1390–99. http://dx.doi.org/10.1007/s10854-018-0409-y.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
29

HASAN, A. S., B. Y. KADEM, M. A. AKRAA et A. K. HASSAN. « PVA:PEDOT:PSS:CARBON BASED NANO-COMPOSITES FOR PRESSURE SENSOR APPLICATIONS ». Digest Journal of Nanomaterials and Biostructures 15, no 1 (janvier 2020) : 197–205. http://dx.doi.org/10.15251/djnb.2020.151.197.

Texte intégral
Résumé :
A novel pressure sensor, PVA:PEDOT:PSS: carbon-based nanocomposites has been characterized by different physical analyses and measurements. Through SEM and optical images, we notice that carbon-based materials to the PVA/PEDOT: PSS solutions change the shape of the surface and its mechanical characteristics in addition to the change of resistance and be the highest possible at carbon black (7.98 x 10-1). XRD results show that the PVA/PEDOT:PSS: MWCNTs composite has the highest value of the strain (s= - 0.0753) and the lowest value for grain size (G = 1.03456 nm). The adhesion properties, the casted drops solutions have high adhesion properties.
Styles APA, Harvard, Vancouver, ISO, etc.
30

Kukhta, A. V., A. E. Pochtenny, A. V. Misevich, I. N. Kukhta, E. M. Semenova, S. A. Vorobyova et E. Sarantopoulou. « Optical and electrophysical properties of nanocomposites based on PEDOT : PSS and gold/silver nanoparticles ». Physics of the Solid State 56, no 4 (avril 2014) : 827–34. http://dx.doi.org/10.1134/s1063783414040131.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
31

Giuri, Antonella, Sofia Masi, Silvia Colella, Andrea Listorti, Aurora Rizzo, Alessandro Kovtun, Simone Dell'Elce, Andrea Liscio et Carola Esposito Corcione. « Rheological and physical characterization of PEDOT : PSS/graphene oxide nanocomposites for perovskite solar cells ». Polymer Engineering & ; Science 57, no 6 (13 mars 2017) : 546–52. http://dx.doi.org/10.1002/pen.24554.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
32

Türkmen, Tülin Ateş, Nevin Taşaltın, Cihat Taşaltın, Gülsen Baytemir et Selcan Karakuş. « PEDOT : PSS / β12 borophene nanocomposites as an inorganic-organic hybrid electrode for high performance supercapacitors ». Inorganic Chemistry Communications 139 (mai 2022) : 109329. http://dx.doi.org/10.1016/j.inoche.2022.109329.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
33

Ram, Jagjeevan, R. G. Singh, Fouran Singh, Vikas Kumar, Vishnu Chauhan, Rashi Gupta, Utkarsh Kumar, B. C. Yadav et Rajesh Kumar. « Development of WO3-PEDOT : PSS hybrid nanocomposites based devices for liquefied petroleum gas (LPG) sensor ». Journal of Materials Science : Materials in Electronics 30, no 14 (29 juin 2019) : 13593–603. http://dx.doi.org/10.1007/s10854-019-01728-9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
34

Ganya, Elison S., Sabata J. Moloi, Sekhar C. Ray et Way-Faung Pong. « Tuning the electronic and magnetic properties of PEDOT-PSS-coated graphene oxide nanocomposites for biomedical applications ». Journal of Materials Research 35, no 18 (14 septembre 2020) : 2478–90. http://dx.doi.org/10.1557/jmr.2020.236.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
35

Shewale, Prashant Shivaji, et Kwang-Seok Yun. « Ternary nanocomposites of PEDOT : PSS, RGO, and urchin-like hollow microspheres of NiCo2O4 for flexible and weavable supercapacitors ». Materials Science and Engineering : B 292 (juin 2023) : 116404. http://dx.doi.org/10.1016/j.mseb.2023.116404.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
36

Almukhlifi, Hanadi A., Syed Khasim et Apsar Pasha. « Fabrication and testing of low-cost and flexible smart sensors based on conductive PEDOT-PSS nanocomposite films for the detection of liquefied petroleum gas (LPG) at room temperature ». Materials Chemistry and Physics 263 (avril 2021) : 124414. http://dx.doi.org/10.1016/j.matchemphys.2021.124414.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
37

N, Yashaswini, Suraj L, Sachith Nayak, Anil Subash S, Ajit Khosla et Manjunatha C. « Construction, Working, and Applications of E-Tongue : A Versatile Tool for All Tastes ? » ECS Transactions 107, no 1 (24 avril 2022) : 20193–211. http://dx.doi.org/10.1149/10701.20193ecst.

Texte intégral
Résumé :
An Electronic Tongue or E-tongue can be defined as a bio-mimicking sensor generally meant to mimic the ability to taste sweet, sour, bitter, and salty compounds and quantify each of these compounds. In an E-tongue, there are counter/sensing electrodes and a reference electrode. The current generated between the electrodes or the change in the resistance of the electrodes is used as an input for a mathematical model and with the help of computer simulations the taste or the nature of the compound is analyzed. This type analysis is usually seen in systems using electrodes modified with advanced nanocomposites such as graphene, PEDOT: PSS, Molybdenum Disulphide, etc. Here the tendency of the sample to resist the flow of electrons from the working electrode to the reference electrode is measured with input signals constantly varying in frequency and amplitude. This article discusses the methods and construction of E-tongues as well as their application across various fields. We shall also discuss the experimental details of various types of E-Tongue used in different solutions and their results. E-tongues have an important role in wine tasting today as their ability to breakdown the compound and individually analyze the components of the compounds with excellent accuracy is unparalleled.
Styles APA, Harvard, Vancouver, ISO, etc.
38

Mohanapriya, M. K. « Zeolite 4A Filled Poly (3, 4-Ethylenedioxythiophene) : (Polystyrenesulfonate) (PEDOT : PSS) And Polyvinyl Alcohol (PVA) Blend Nanocomposites As High-K Dielectric Materials For Embedded Capacitor Applications ». Advanced Materials Letters 7, no 12 (1 décembre 2016) : 996–1002. http://dx.doi.org/10.5185/amlett.2016.6555.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
39

Yasumoro, Keita, Yushi Fujita, Hideki Arimatsu et Takuya Fujima. « A New Composite Structure of PEDOT/PSS : Macro-Separated Layers by a Polyelectrolyte Brush ». Polymers 12, no 2 (16 février 2020) : 456. http://dx.doi.org/10.3390/polym12020456.

Texte intégral
Résumé :
Polyethylene dioxythiophene and polyethylene sulfonic acid (PEDOT/PSS) composite is gathering attention as an organic transparent conductive film material. However, it requires a core-shell structure in which conductive PEDOT is covered with insulating PSS. Providing film formability and a carrier to PEDOT, the PSS shell hinders carrier conduction as an insulating barrier. In this study, we realized that creating a macro-separated PEDOT/PSS composite by using a polyelectrolyte brush substrate and in-situ PEDOT polymerization without the PSS barrier increases durability and conductivity in comparison with commercially available PEDOT/PSS film, achieving a conductivity of 5000–6000 S/cm.
Styles APA, Harvard, Vancouver, ISO, etc.
40

Chung, Yun-Lung, Pei-Yu Chou et Ming-Jyh Sheu. « The Wound-Healing Activity of PEDOT-PSS in Animals ». International Journal of Molecular Sciences 24, no 16 (8 août 2023) : 12539. http://dx.doi.org/10.3390/ijms241612539.

Texte intégral
Résumé :
This study evaluated the wound-healing activity of a polymer, Poly(3,4-ethylenedioxythiophene):poly-(styrene sulfonate) (PEDOT: PSS), and determined its mechanism based on angiogenic activity in a full-thickness excision wound model in Spraque Dawley (SD) rats. Administering PEDOT: PSS (1.6) 1.5 ppm at a dose of 50 mg/kg/day significantly improved wound healing in the SD rats on the eleventh day after the incision was created. PEDOT: PSS-treated animals presented no anti-inflammatory skin effects; however, there was an increase in angiogenic behavior. VEGF was found to be significantly elevated in the PEDOT: PSS-treated groups seven days post-incision. However, only a higher concentration of PEDOT: PSS increased TGF-β1 expression within the same time frame. Our results showed that PEDOT: PSS enhances wound healing activity, mainly in terms of its angiogenic effects. In this paper, we describe the highly conductive macromolecular material PEDOT: PSS, which demonstrated accelerated wound-healing activity in the animal incision model. The results will further provide information regarding the application of PEDOT: PSS as a dressing for medical use.
Styles APA, Harvard, Vancouver, ISO, etc.
41

Lee, Sung Koo, et Kyeong K. Lee. « Conductivity Enhancement of PEDOT/PSS Films with Ionic Liquids as Dopants ». Advanced Materials Research 93-94 (janvier 2010) : 501–4. http://dx.doi.org/10.4028/www.scientific.net/amr.93-94.501.

Texte intégral
Résumé :
The ionic materials were added to PEDOT/PSS solution as secondary dopants. The conductivity of PEDOT/PSS film improved with adding ionic materials. The film of PEDOT/PSS with 1% pyridinium p-toluene-sulfonate showed the conductivity of 23S/cm, which is increased about three orders than the film of origin PEDOT/PSS with 0.028S/cm. The surface morphology of films of PEDOT/PSS mixture is investigated by atomic force microscope. The AFM showed the increasing of grain size with the addition of pyridinium p-toluene-sulfonate.
Styles APA, Harvard, Vancouver, ISO, etc.
42

Jönsson, S. K. M., W. R. Salaneck et M. Fahlman. « X-ray photoelectron spectroscopy study of the metal/polymer contacts involving aluminum and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonic acid) derivatives ». Journal of Materials Research 18, no 5 (mai 2003) : 1219–26. http://dx.doi.org/10.1557/jmr.2003.0167.

Texte intégral
Résumé :
The contact formed between aluminum and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonic acid) (PEDOT-PSS) derivatives was studied using x-ray photoelectron spectroscopy. The aluminum/PEDOT-PSS contact contains an interfacial layer formed by chemical reactions between aluminum and mainly poly(styrenesulfonic acid) (PSSH). These chemical interactions were studied with the help of model systems (PSSH, benzenesulfonic acid, and sodium benzenesulfonate). The preferred reaction site of aluminum is the SO3− and SO3−H+ groups of the PSS chains, giving rise to C-S-Al(-O) and C-O-Al species. The resulting contact formed consists of an insulating aluminum/PSS layer and a thin region of partially dedoped PEDOT-PSS. There is significant aluminum diffusion into films of the highly conducting form of PEDOT-PSS that have substantially less PSS at the surface. Hence, no (thick) aluminum/PSS layer is formed in this case, though the PEDOT chains close to the aluminum contact will still be partially dedoped as for the aluminum/PEDOT-PSS case.
Styles APA, Harvard, Vancouver, ISO, etc.
43

Lien, Shui-Yang, Po-Chen Lin, Wen-Ray Chen, Chuan-Hsi Liu, Kuan-Wei Lee, Na-Fu Wang et Chien-Jung Huang. « The Mechanism of PEDOT : PSS Films with Organic Additives ». Crystals 12, no 8 (8 août 2022) : 1109. http://dx.doi.org/10.3390/cryst12081109.

Texte intégral
Résumé :
This article demonstrates changes in the structures of poly (3,4-ethylene dioxythiophene): polystyrene sulfonate (PEDOT: PSS) with the addition of organic additives. The mechanisms of PEDOT: PSS are analyzed using X-ray photoelectron spectroscopy (XPS), cross-sectional images obtained from scanning electron microscopy (SEM), and contact angles. In this paper, a bond-breaking reaction and phase separation are successfully found to occur between PEDOT: PSS molecules and the organic additives. Our research also finds that this bond-breaking reaction and phase separation exist in the PEDOT: PSS–sorbitol–maltitol film at the same time. The addition of organic additives will improve the optical properties and the moisture stability of PEDOT: PSS films.
Styles APA, Harvard, Vancouver, ISO, etc.
44

Panapoy, M., M. Saengsil et Bussarin Ksapabutr. « Electrical Conductivity of Poly(3,4-Ethylenedioxythiophene)-Poly(Styrenesulfonate) Coatings on Polyacrylonitrile Nanofibers for Sensor Applications ». Advanced Materials Research 55-57 (août 2008) : 257–60. http://dx.doi.org/10.4028/www.scientific.net/amr.55-57.257.

Texte intégral
Résumé :
Conducting polyacrylonitrile (PAN) nanofiber mats were prepared by dipping non-woven nanofiber mats of PAN in the solution of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) (PEDOT/PSS). PAN nanofiber mats were fabricated via the electrospinning process. The solvent used for PEDOT/PSS was ethylene glycol and isopropanol. The morphology of the resulting PAN nanofibers and the coating layers was investigated using SEM analysis. The electrical conductivity of PEDOT/PSS coated PAN nanofiber mats was measured by the four-point probe method, for different concentrations of solvent in the PEDOT/PSS solution. An addition of ethylene glycol resulted in higher electrical conductivity of the coated mats than that of isopropanol. The resistive humidity sensing properties were also investigated. The device reproducibility was presented by vapor adsorption/desorption dynamic cycles. The reproducibility of the PEDOT/PSS coated mats was superior to that of neat PEDOT/PSS films. The response sensitivity of coated mats using isopropanol as solvent was higher than that using ethylene glycol.
Styles APA, Harvard, Vancouver, ISO, etc.
45

Liu, Yin, Xin Li et Jing Chun Lü. « Electrically Conductive PEDOT-PSS/PAN Composite Fibers Prepared by Wet Spinning ». Advanced Materials Research 627 (décembre 2012) : 885–91. http://dx.doi.org/10.4028/www.scientific.net/amr.627.885.

Texte intégral
Résumé :
The composite conductive fibers based on poly (3,4-ethylenedioxythiophene)-polystyrene sulfonic acid (PEDOT-PSS) blended with polyacrylonitrile (PAN) were prepared via a conventional wet spinning process. The influences of PEDOT-PSS content on the electrical conductivity, thermal stability and mechanical properties of the composite fibers were investigated. The fiber with 1.83 wt% PEDOT-PSS showed a conductivity of 5.0 S/cm. The breaking strength of the fibers was in the range of 0.36-0.60 cN/dtex. The thermal stability of the PEDOT-PSS/PAN composite fibers was similar to but a slightly lower than the pure PAN. The XRD results revealed that both pure PAN and the PEDOT-PSS/PAN composite fibers were amorphous phase, and the crystallization of the latter was lower than the former.
Styles APA, Harvard, Vancouver, ISO, etc.
46

Sachit, R. S. « Solar cells based on inkjet-printed layer polymer ». Journal of Physics : Conference Series 2114, no 1 (1 décembre 2021) : 012026. http://dx.doi.org/10.1088/1742-6596/2114/1/012026.

Texte intégral
Résumé :
Abstract In recent years, based on organic–inorganic hybrid solar cells the p-type conducting polymer poly (3,4-ethylenedioxythiophene): poly styrene sulfonate (PEDOT: PSS) and n-type silicon (Si) have attracted a lot of attention. We describe an efficient hybrid solar cell based on PEDOT from this perspective: The simplest and most cost-effective method is to use PSS and a planar Si substrate (1 0 0) fabrication method effective techniques for experimentation Drop casting was used to construct PSS at temperatures, solar cells based on a heterojunction between crystalline silicon and the organic polymer PEDOT: below 100 degrees Celsius. The Si/PEDOT interface prevents electrons from migrating to the anode in n-type silicon and serves diffused p-n junctions as a low-temperature alternative The devices take the consequence of silicon’s absorption and transfer of light capabilities while combining them with organics’ ease of manufacture. PEDOT: PSS and PEDOT: PSS interface properties hermetic Psi were studied. The structural, optical and morphological properties in addition to electrical PSS is a property of PEDOT. were studied, the effectiveness of The flawlessly matching contact between the PEDOT: PSS film and the tight silicon can be attributed to conversion. Obtaining Silver pave efficiency is a glowing future approach in order to attain maximum efficiency, low-cost solar cells.
Styles APA, Harvard, Vancouver, ISO, etc.
47

Li, Xin, et Cong Ju Li. « Synthesis and Electrochromic Properties of Fluorescent PEDOT/PSS Composite ». Applied Mechanics and Materials 665 (octobre 2014) : 300–306. http://dx.doi.org/10.4028/www.scientific.net/amm.665.300.

Texte intégral
Résumé :
A novel kind of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) (PEDOT/PSS) composite was synthesized through chemical oxidation polymerization in the presence of fluorescent yellow GG (FYGG) as the functional co-dopant and Poly(vinyl alcohol) as the film-forming additives. The as-prepared composite was found combined with fluorescent function and electrochromic property. Film of the PEDOT/PSS-FYGG composites switches from green in the reduction state to blue-green in the oxidized state, which is different from the pure PEDOT/PSS of light blue (-0.2V) and dark blue (0.8V). Because of the big molecule of FYGG as the dopant, the response time reaching 90% of the full optical contrast of PEDOT/PSS-FYGG was 1.77s for the coloration process and 1.78s for the reverse bleach process, which is a little slower than the pure PEDOT/PSS. Additionally, PEDOT/PSS-FYGG film presents a good stability. It is shown that acid dye doping is an effective method to broaden the color change range of the electrochromic mateials.
Styles APA, Harvard, Vancouver, ISO, etc.
48

Han, Tingting, Zekra Mousavi, Ulriika Mattinen et Johan Bobacka. « Coulometric response characteristics of solid contact ion-selective electrodes for divalent cations ». Journal of Solid State Electrochemistry 24, no 11-12 (15 juin 2020) : 2975–83. http://dx.doi.org/10.1007/s10008-020-04718-8.

Texte intégral
Résumé :
Abstract The chronoamperometric and coulometric response of solid contact ion-selective electrodes (SCISEs) for the detection of divalent cations was investigated in order to provide a more complete description of the mechanism of the recently introduced coulometric transduction method for SCISEs. The coulometric transduction method has earlier been employed only for SCISEs that were selective to monovalent ions. The SCISEs utilized poly(3,4-ethylenedioxythiophene) (PEDOT) doped with poly(styrene sulfonate) (PSS−) as the solid contact (ion-to-electron transducer). PEDOT(PSS) was electrodeposited on glassy carbon and covered with plasticized PVC-based ion-selective membranes (ISMs) that were selective towards divalent cations (Ca2+, Pb2+). In contrast to earlier studies, the results obtained in this work show that the coulometric response for the Pb2+-SCISE was limited mainly by ion transport in the PEDOT(PSS) layer, which was not the case for the Ca2+-SCISE, nor was it observed earlier for the monovalent ions. The exceptional behavior of the Pb2+-SCISE was explored further by electrochemical impedance spectroscopy, and it was shown that the effective redox capacitance of PEDOT(PSS) was significantly higher for the Pb2+-SCISE than for the Ca2+-SCISE although the polymerization charge of PEDOT(PSS) was the same. The slow transport of Pb2+ in PEDOT(PSS) was tentatively related to complexation between Pb2+ and PEDOT(PSS).
Styles APA, Harvard, Vancouver, ISO, etc.
49

Venkatesan, Ragavendran, Sheik Moideen Thaha Sheik Kadar Maideen, Saravanan Chandhiran, Sunil Singh Kushvaha, Suresh Sagadevan, Vishnukanthan Venkatachalapathy et Jeyanthinath Mayandi. « Fabrication and Characterization of Si/PEDOT : PSS-Based Heterojunction Solar Cells ». Electronics 11, no 24 (12 décembre 2022) : 4145. http://dx.doi.org/10.3390/electronics11244145.

Texte intégral
Résumé :
In this study, we fabricated a planar Si/PEDOT: PSS heterojunction solar cell using three different solvents—ethylene glycol, acetonitrile, and dimethyl sulfoxide—to find the best one. The fabricated samples were characterized by diffuse reflectance spectroscopy, scanning electron microscopy, X-ray diffraction, and current–voltage. Diffused reflectance spectrum analysis showed reduced reflectance compared to the bare silicon wafers. The absorbance spectrum shows the change in absorption of the Si-coated PEDOT: PSS which was more than a 50% increase in the UV region, and for the EG sample, there was a 20% increase in the entire visible spectrum. This indicates that the solvent plays a major role in the bandgap between the Si and Si/PEDOT: PSS. Scanning electron microscope (SEM) was used to examine the surface morphology of Si/PEDOT: PSS as agglomerated, island-formed surfaces and carbon-layered Si-PEDOT: PSS. Cross-sectional images show the thickness of the PEDOT: PSS layer on the silicon wafer surface. The X-ray diffraction (XRD) pattern shows the characteristic peaks for silicon (69.5°), and Si/PEDOT: PSS shows a forbidden Si (200) peak at 32°. Current–voltage measurements have shown the characteristic diode curve for all fabricated cells. This characteristic diode curve indicated the presence of a heterojunction. Ethylene glycol-containing cells showed current output as 0.2 μA with Voc of 0.2 V.
Styles APA, Harvard, Vancouver, ISO, etc.
50

Lien, Shui-Yang, Po-Chen Lin, Wen-Ray Chen, Chuan-Hsi Liu, Po-Wen Sze, Na-Fu Wang et Chien-Jung Huang. « Improving Optoelectrical Properties of PEDOT : PSS by Organic Additive and Acid Treatment ». Crystals 12, no 4 (11 avril 2022) : 537. http://dx.doi.org/10.3390/cryst12040537.

Texte intégral
Résumé :
This article demonstrates the change of structural and optical properties of poly (3,4-ethylene dioxythiophene): polystyrene sulfonate (PEDOT: PSS) by organic additive and acid treatment. The addition of sorbitol and maltitol can disperse the micelles of PEDOT: PSS. The mechanism of the bond-breaking reaction was investigated and a model for the bond-breaking reaction is also proposed. Furthermore, multiple formic acid treatments were found to reduce the PSS content of PEDOT: PSS, resulting in an enhancement in conductivity (4.2 × 104 S/m).
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « NANOCOMPOSITE AND PEDOT: PSS » pour d’autres types de sources :
Thèses
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie