Littérature scientifique sur le sujet « Morphology of electrojet »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Morphology of electrojet ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Morphology of electrojet"
Bolaji, Olawale, Oluwafisayo Owolabi, Elijah Falayi, Emmanuel Jimoh, Afolabi Kotoye, Olumide Odeyemi, Babatunde Rabiu et al. « Observations of equatorial ionization anomaly over Africa and Middle East during a year of deep minimum ». Annales Geophysicae 35, no 1 (20 janvier 2017) : 123–32. http://dx.doi.org/10.5194/angeo-35-123-2017.
Texte intégralLópez, Ericson, Franklin Aldás et Akimasa Yoshikawa. « Analysis of Magnetic Field Variations Produced by Equatorial Electro-Jets ». Proceedings of the International Astronomical Union 13, S335 (juillet 2017) : 125–27. http://dx.doi.org/10.1017/s1743921318000662.
Texte intégralPartamies, Noora, Daniel Whiter, Kirsti Kauristie et Stefano Massetti. « Magnetic local time (MLT) dependence of auroral peak emission height and morphology ». Annales Geophysicae 40, no 5 (12 octobre 2022) : 605–18. http://dx.doi.org/10.5194/angeo-40-605-2022.
Texte intégralMo, X. H., D. H. Zhang, L. P. Goncharenko, Y. Q. Hao et Z. Xiao. « Quasi-16-day periodic meridional movement of the equatorial ionization anomaly ». Annales Geophysicae 32, no 2 (18 février 2014) : 121–31. http://dx.doi.org/10.5194/angeo-32-121-2014.
Texte intégralKannan, Bhuvaneswari, David E. Williams et Jadranka Travas-Sejdic. « Effect of Morphology of Conducting Polymer on DNA Sensing ». Materials Science Forum 700 (septembre 2011) : 211–14. http://dx.doi.org/10.4028/www.scientific.net/msf.700.211.
Texte intégralPham Thi Thu, H., C. Amory-Mazaudier et M. Le Huy. « Sq field characteristics at Phu Thuy, Vietnam, during solar cycle 23 : comparisons with Sq field in other longitude sectors ». Annales Geophysicae 29, no 1 (4 janvier 2011) : 1–17. http://dx.doi.org/10.5194/angeo-29-1-2011.
Texte intégralMorozov, Oleg S., Anna V. Ivanchenko, Sergey S. Nechausov et Boris A. Bulgakov. « Effect of Electrode Morphology on Performance of Ionic Actuators Based on Vat Photopolymerized Membranes ». Membranes 12, no 11 (7 novembre 2022) : 1110. http://dx.doi.org/10.3390/membranes12111110.
Texte intégralPayer, Gizem, et Özgenç Ebil. « Zinc Electrode Morphology Evolution in High Energy Density Nickel-Zinc Batteries ». Journal of Nanomaterials 2016 (2016) : 1–9. http://dx.doi.org/10.1155/2016/1280236.
Texte intégralMungufeni, Patrick, John Bosco Habarulema, Yenca Migoya-Orué et Edward Jurua. « Statistical analysis of the correlation between the equatorial electrojet and the occurrence of the equatorial ionisation anomaly over the East African sector ». Annales Geophysicae 36, no 3 (13 juin 2018) : 841–53. http://dx.doi.org/10.5194/angeo-36-841-2018.
Texte intégralJaffe, Debra M., Nancy P. Solomon, Robert A. Robinson, Henry T. Hoffman et Erich S. Luschei. « Comparison of Concentric Needle Versus Hooked-Wire Electrodes in the Canine Larynx ». Otolaryngology–Head and Neck Surgery 118, no 5 (mai 1998) : 655–62. http://dx.doi.org/10.1177/019459989811800515.
Texte intégralThèses sur le sujet "Morphology of electrojet"
Melin, Tim. « Morphology of electrodeposited Na on Al electrodes ». Thesis, Uppsala universitet, Strukturkemi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-390801.
Texte intégralMcDermott, Christie Allred. « Morphology and electrochemical reactivity of glassy carbon electrodes / ». The Ohio State University, 1992. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487780393268822.
Texte intégralHua, Xiao. « Structure, morphology and reaction mechanisms of novel electrode materials for lithium-ion batteries ». Thesis, University of Cambridge, 2015. https://www.repository.cam.ac.uk/handle/1810/252637.
Texte intégralHegge, Friedemann [Verfasser], Stefan [Akademischer Betreuer] Glunz et Simon [Akademischer Betreuer] Thiele. « Morphology analysis and development of electrodes for polymer electrolyte membrane water electrolyzers and fuel cells ». Freiburg : Universität, 2020. http://d-nb.info/1218464089/34.
Texte intégralLiu, Shuai Verfasser], Werner [Akademischer Betreuer] [Lehnert et Lorenz [Akademischer Betreuer] Singheiser. « Morphology and degradation of high temperature polymer electrolyte fuel cell electrodes / Shuai Liu ; Werner Karl Josef Lehnert, Lorenz Singheiser ». Aachen : Universitätsbibliothek der RWTH Aachen, 2019. http://d-nb.info/1211487881/34.
Texte intégralVonau, Corinna. « Morphologie und Degradation von O2, Pt│YSZ-Elektrodensystemen ». Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-183965.
Texte intégralReddi, Rahul. « In-situ characterization of Li-ion battery electrodes using atomic force microscopy ». The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1524215477787917.
Texte intégralOyarce, Alejandro. « Electrode degradation in proton exchange membrane fuel cells ». Doctoral thesis, KTH, Tillämpad elektrokemi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-133437.
Texte intégralDenna doktorsavhandling behandlar degraderingen av polymerelektrolytbränslecellselektroder. polymerelektrolytbränslecellselektroder. Den handlar särskilt om nedbrytningen av elektroden kopplad till en degraderingsmekanism som heter ”localized fuel starvation” oftast närvarande vid uppstart och nedstängning av bränslecellen. Vid start och stopp kan syrgas och vätgas förekomma samtidigt i anoden. Detta leder till väldigt höga elektrodpotentialer i katoden. Resultatet av detta är att kolbaserade katalysatorbärare korroderar och att bränslecellens livslängd förkortas. Målet med avhandlingen har varit att utveckla metoder, material och strategier för att både öka förståelsen av denna degraderingsmekanism och för att maximera katalysatorbärarens livslängd.Ett vanligt tillvägagångsätt för att bestämma graden av katalysatorns degradering är genom mätning av den elektrokemiskt aktiva ytan hos bränslecellselektroderna. I denna avhandling har dessutom effekten av temperatur och relativ fukthalt studerats. Låga fukthalter minskar den aktiva ytan hos elektroden, vilket sannolikt orsakas av en omstrukturering av jonomeren och av kontaktförlust mellan jonomer och katalysator.Olika accelererade degraderingstester för kolkorrosion har använts. Potentiostatiska tester vid 1.2 V mot RHE visade sig vara för milda. Potentiostatiska tester vid 1.4 V mot RHE visade sig däremot medföra en hög grad av reversibilitet, som också den tros vara orsakad av en omstrukturering av jonomeren. Cykling av elektrodpotentialen degraderade istället elektroden irreversibelt, inom rimlig tid och kunde väldigt nära simulera förhållandena vid uppstart och nedstängning.Korrosionen av katalysatorbäraren medför degradering av katalysatorn och har också en stor inverkan på elektrodens morfologi. En minskad elektrodporositet, en ökad agglomeratstorlek och en anrikning av jonomeren gör att elektrodens masstransportegenskaper försämras. Grafitiska kolfibrer visade sig vara mer resistenta mot kolkorrosion än konventionella kol, främst p.g.a. deras låga ytarea. Grafitiska kolfibrer visade också en förmåga att bättre bibehålla elektrodens morfologi efter accelererade tester, vilket resulterade i lägre masstransportförluster.Olika systemstrategier för nedstängning jämfördes. Att inte göra något under nedstängning är mycket skadligt för bränslecellen. Förbrukning av syre med en last och spolning av katoden med vätgas visade 100 gånger lägre degraderingshastighet av bränslecellsprestanda jämfört med att inte göra något alls och 10 gånger lägre degraderingshastighet jämfört med spolning av anoden med luft. In-situ kontaktresistansmätningar visade att kontaktresistansen mellan bipolära plattor och GDL är dynamisk och kan ändras beroende på driftförhållandena.
QC 20131104
Gcilitshana, Oko Unathi. « Supercapacitor electrode materials based on nanostructured conducting polymers and metal oxides ». Thesis, University of the Western Cape, 2013. http://hdl.handle.net/11394/3532.
Texte intégralHsu, Chia-wei, et 許家瑋. « Electrochemical and in-situ surface morphology characteristics of radical polymer brushes for thin-film electrodes ». Thesis, 2016. http://ndltd.ncl.edu.tw/handle/22926789529737538490.
Texte intégral國立中山大學
化學系研究所
104
We report a novel approach to study the electrochemical performance of nitroxide radical polymer brushes for thin-film electrodes, in association with the in-situ surface morphology characteristics. In this thesis, we synthesized non-cross-linked nitroxide radical polymer brushes as the positive electrode material for thin-film electrodes via surface-initiated atom transfer radical polymerization (SI-ATRP), which is an effective method to produce smoothly surfaced organic radical polymer brushes with different grafting densities. After SI-ATRP, the covalent bonds between the nitroxide polymers and the conducting substrate are formed, which not only prevent the organic polymer from dissolving into organic electrolyte solution but also improve the cycle life performance of batteries. To understand the correlation between the density of surface-initiator and the amount of polymer chains via calculations of grafting density, we examined the electrochemical performance and the morphology of nitroxide radical polymers by varying their grafting densities. The polymer brushes with different grafting densities are characterized by water contact angle goniometer, atomic force microscope (AFM) and electron spectroscopy for chemical analysis (ESCA), along with electrochemistry techniques such as cyclic voltammetry (CV) and chronopotentiometry (CP). For further study of the mechanism in the polymer layer during electrochemical reactions within designated voltage ranges, in-situ measurements are performed by combining AFM and chronoamperometry (CA). The experimental results show that at 1% initiator composition polymer brushes exhibit better electrochemical performance, and the swelling effect in this electrolyte is also more obvious, implying an enhanced motion of polymer chains. Moreover, the space between ionic channels is enlarged by lowing the grafting density, which leads to a faster ionic diffusion rate. Through in-situ measurements, we found that polymer brushes at 1% initiator composition possess larger variation in thickness than at 100% initiator composition, and the value of apparent diffusion coefficients of polymer brushes reaches its maximum at 1% initiator composition as well, which are both in agreement with the molecular dynamic stimulation results. This study provides direct evidence showing that polymer brushes at 1% initiator composition have larger ionic-channel space, allowing more rapid passage of the anions.
Chapitres de livres sur le sujet "Morphology of electrojet"
Srinivasan, Venkat, Kenneth Higa, Pallab Barai et Yuanyuan Xie. « Computational Modeling of Morphology Evolution in Metal-Based Battery Electrodes ». Dans Handbook of Materials Modeling, 1193–219. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-44677-6_87.
Texte intégralSrinivasan, Venkat, Kenneth Higa, Pallab Barai et Yuanyuan Xie. « Computational Modeling of Morphology Evolution in Metal-Based Battery Electrodes ». Dans Handbook of Materials Modeling, 1–27. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-42913-7_87-1.
Texte intégralPopov, Konstantin I., Predrag M. Živković et Nebojša D. Nikolić. « The Effect of Morphology of Activated Electrodes on Their Electrochemical Activity ». Dans Modern Aspects of Electrochemistry, 163–213. New York, NY : Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-5589-0_4.
Texte intégralPouchko, S. V., A. K. Ivanov-Schitz, T. L. Kulova, A. M. Skundin et E. P. Turevskaya. « Morphology Control of Electrode Materials for Li Batteries through Sol-Gel Technique ». Dans New Trends in Intercalation Compounds for Energy Storage, 493–96. Dordrecht : Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0389-6_36.
Texte intégralAlvisi, Marco, Giovanna Galtieri, L. Giorgi, Emanuele Serra, Tiziana Di Luccio et R. Giorgi. « Evolution of Pt Nanoclusters Morphology on PEMFC Electrode due to Methanol Oxidation Reaction Studied by Electron Microscopy and Synchrotron Grazing Incidence X-Ray Diffraction ». Dans Advances in Science and Technology, 181–86. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-07-9.181.
Texte intégralAdarakatti, Prashanth S., et Sumedha H. N. « MXenes based 2D nanostructures for supercapacitors ». Dans Electrochemistry, 261–303. The Royal Society of Chemistry, 2023. http://dx.doi.org/10.1039/bk9781839169366-00261.
Texte intégralLiang, Hong, Hong Huang, Liying Zhao, Qingchun Wang, Yangmin Ren, Youli Yang, Qiang Zheng, Yi Liu et Jie Lv. « Preparation of Co-TiO2 Nanotube Array Electrode for the Electrocatalytic Degradation of Chlorine-Containing Wastewater ». Dans Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220332.
Texte intégralRozman, Martin, et Miha Lukšič. « Morphology and Functionalization of Metal Foils and Other Surfaces for Electrochemical Applications ». Dans Handbook of Research on Tribology in Coatings and Surface Treatment, 359–89. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-9683-8.ch015.
Texte intégralShao, Godlisten N., et Talam E. Kibona. « Mesoporous Electrodes for Supercapacitors ». Dans Morphology Design Paradigms for Supercapacitors, 115–29. CRC Press, 2019. http://dx.doi.org/10.1201/9780429263347-6.
Texte intégralKalivel, Parameswari. « Treatment of Textile Dyeing Waste Water Using TiO2/Zn Electrode by Spray Pyrolysis in Electrocoagulation Process ». Dans Dyes and Pigments - Novel Applications and Waste Treatment. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.95325.
Texte intégralActes de conférences sur le sujet "Morphology of electrojet"
Jibhakate, Piyush D., et George J. Nelson. « Fabrication and Characterization of Nanostructured Cathodes for Li-Ion Batteries ». Dans ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67873.
Texte intégralNelson, George J., Comas Haynes et William Wepfer. « A Fractal Approach for Modeling SOFC Electrode Mass Transport ». Dans ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12870.
Texte intégralKoraishy, Babar M., Sam Solomon, Jeremy P. Meyers et Kristin L. Wood. « Parametric Investigations of Direct Methanol Fuel Cell Electrodes Manufactured by Spraying ». Dans ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology collocated with ASME 2011 5th International Conference on Energy Sustainability. ASMEDC, 2011. http://dx.doi.org/10.1115/fuelcell2011-54824.
Texte intégralYe, F. X., A. Ohmori et C. J. Li. « The Photoresponse and Donor Concentration of Plasma Sprayed TiO2 and TiO2-ZnO Electrodes ». Dans ITSC2004, sous la direction de Basil R. Marple et Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p0922.
Texte intégralChiu, W. K. S., A. V. Virkar, K. L. Reifsnider, F. Rabbi et Q. Liu. « HeteroFoaMs : Electrode Modeling in Nano-Structured Heterogeneous Materials for Energy Systems ». Dans ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology collocated with ASME 2011 5th International Conference on Energy Sustainability. ASMEDC, 2011. http://dx.doi.org/10.1115/fuelcell2011-54950.
Texte intégralAhmed, Riaz, et Kenneth Reifsnider. « Study of Influence of Electrode Geometry on Impedance Spectroscopy ». Dans ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33209.
Texte intégralPark, Jonghyun, Sangmin Lee, John Hoffmann et Ann Marie Sastry. « Study of the Effect of Electrode Microstructures on Battery Performance ». Dans ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-52601.
Texte intégralMorovatiyan, Mohammadrasool, Martia Shahsavan, Mengyan Shen et J. Hunter Mack. « Investigation of the Effect of Electrode Surface Roughness on Spark Ignition ». Dans ASME 2018 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/icef2018-9691.
Texte intégralAkle, Barbar J., et Donald J. Leo. « Investigation of Extensional Actuation Strain in Ionomeric Polymer Transducers ». Dans ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80220.
Texte intégralTsushima, Shohji, Fumiya Kondo, Sho Sasaki et Shuichiro Hirai. « Efficient Utilization of the Electrodes in a Redox Flow Battery by Modifying Flow Field and Electrode Morphology ». Dans The 15th International Heat Transfer Conference. Connecticut : Begellhouse, 2014. http://dx.doi.org/10.1615/ihtc15.ecs.009326.
Texte intégralRapports d'organisations sur le sujet "Morphology of electrojet"
Landeros, J. Jr, P. Pizzo, M. Cantow et F. Uribe. Investigation of the electronic properties and morphology of conducting polymer electrodes for engineering applications. Office of Scientific and Technical Information (OSTI), février 1995. http://dx.doi.org/10.2172/437778.
Texte intégralBedrov, Dmitry. Final Technical Report : SISGR : The Influence of Electrolyte Structure and Electrode Morphology on the Performance of Ionic-Liquid Based Supercapacitors : A Combined Experimental and Simulation Study. Office of Scientific and Technical Information (OSTI), août 2013. http://dx.doi.org/10.2172/1090143.
Texte intégral