Littérature scientifique sur le sujet « Moisture and thermal regulating textile »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Moisture and thermal regulating textile ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Moisture and thermal regulating textile"
Huang, Leping, Ying Chen, Zhaobao Xu, Cui He, Youmu Li, Jinchao Zhao et Youhong Tang. « Regulating Al2O3/PAN/PEG Nanofiber Membranes with Suitable Phase Change Thermoregulation Features ». Nanomaterials 13, no 16 (12 août 2023) : 2313. http://dx.doi.org/10.3390/nano13162313.
Texte intégralПожилов-Несміян, Г. М., Н. П. Супрун et Т. В. Гірна. « РОЗРОБКА АПЛІКАЦІЙНИХ ВКЛАДОК У ШВЕЙНІ ВИРОБИ ДЛЯ ЛЮДЕЙ З ІНВАЛІДНІСТЮ ». Bulletin of the Kyiv National University of Technologies and Design. Technical Science Series 142, no 1 (3 juin 2020) : 63–70. http://dx.doi.org/10.30857/1813-6796.2020.1.6.
Texte intégralSantos, Gilda, Rita Marques, Miguel Pinto, Francisco Pinheiro et Patricia Ferreira. « Innovative clothing system for protection against perforation ». Communications in Development and Assembling of Textile Products 1, no 2 (3 décembre 2020) : 121–29. http://dx.doi.org/10.25367/cdatp.2020.1.p121-129.
Texte intégralMcCann, Jane. « Design for Ageing Well : Improving the Quality of Life for the Ageing Population Using a Technology Enabled Garment System ». Advances in Science and Technology 60 (septembre 2008) : 154–63. http://dx.doi.org/10.4028/www.scientific.net/ast.60.154.
Texte intégralHowie, Nicholas, et Samuel Rabey. « A Meta-Analysis on the Advancement on the thermodynamic properties of clothing in extreme cold environments ». PAM Review Energy Science & ; Technology 6 (24 mai 2019) : 73–87. http://dx.doi.org/10.5130/pamr.v6i0.1548.
Texte intégralGOHAR, EMADELDIN SAYED, et ADNAN AHMED MAZARI. « Thermal performance of protective clothing (firefighter) under extreme ambient conditions ». Industria Textila 74, no 05 (31 octobre 2023) : 542–46. http://dx.doi.org/10.35530/it.074.05.20237.
Texte intégralGu, Hai Lan, et Wei Zhang. « Optimization Research in Heat-Moisture Comfort Evaluation System Parameters of Fabric Based on Matlab ». Applied Mechanics and Materials 644-650 (septembre 2014) : 1514–18. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.1514.
Texte intégralHes, Lubos, Roshan Unmar et Satyadeo Rosunee. « Factors influencing precision of determination of thermal parameters of textile fabrics ». Journal of Textile Engineering & ; Fashion Technology 9, no 4 (11 août 2023) : 101–4. http://dx.doi.org/10.15406/jteft.2023.09.00341.
Texte intégralSchönfisch, David, Michael Göddel, Jörg Blinn, Christian Heyde, Heiko Schlarb, Wim Deferme et Antoni Picard. « New Type of Thermal Moisture Sensor for in‐Textile Measurements ». physica status solidi (a) 216, no 12 (14 février 2019) : 1800765. http://dx.doi.org/10.1002/pssa.201800765.
Texte intégralWijenayaka, Lahiru A., Ruchira N. Wijesena, Nadeeka D. Tissera, W. R. L. Nisansala Bandara, Gehan J. Amaratunga et K. M. Nalin De Silva. « Infrared absorbing nanoparticle impregnated self-heating fabrics for significantly improved moisture management under ambient conditions ». Royal Society Open Science 8, no 5 (mai 2021) : 202222. http://dx.doi.org/10.1098/rsos.202222.
Texte intégralThèses sur le sujet "Moisture and thermal regulating textile"
Kaleem, ullah Hafiz Muhammad. « Développement de fibres bicomposantes innovantes pour le textile de confort thermique ». Electronic Thesis or Diss., Centrale Lille Institut, 2022. http://www.theses.fr/2022CLIL0034.
Texte intégralThis study is part of Interreg European Project between Haute de France and Belgium. The project is called Photonitex. The aim of this project is to develop a personal thermal regulation intelligent textile that dynamically controls skin temperature. This work was done in collaboration between Centre Européen des Textiles Innovants (CETI) and School National Superior of Textile Arts and Industries (ENSAIT).The objective of this thesis is to develop a bicomponent fibers for thermal comfort textile. The literature review was done to select the most suitable polymer materials that are commonly used in textile industry. In addition, based on the literature review, the design of the trilobal bicomponent fibers was finalized to realize the dynamic thermal comfort textile. Moreover, used polymer materials must exhibit hydrophilic difference to achieve the dynamic thermal properties in fabrics. The inner material of this bicomponent trilobal fiber must be more hydrophilic than the outer material. PA6 and PA6-6 were selected as hydrophilic core and PET hydrophobic outer material for trilobal bicomponent filaments. However, PA6 and PA6-6 are incompatible and immiscible to PET. The major challenge to achieve the desired bicomponent fibers is to acquire a sufficient adhesion at the interface to avoid the pre-splitting or separation between these two polymer materials. In order to improve their miscibility at the interface PA12 was added in PA6 and PA6-6 at 5, 10, 15% wt % via polymer compounding process. In order to produce trilobal bicomponent filament via coextrusion melt spinning process, rheological behavior of the used polymer materials play an important role. To select the most suitable materials for trilobal bicomponent fiber, rheological studies were conducted on pure and polymer blends using capillary rheometer. In addition, hydrophilic properties of each polymer and their blends were also tested on knitted fabrics with contact angle and wicking measurements. To evaluate the effect of PA12 on PET and PA6 interfacial adhesion, bicomponent PET/PA6 sheath/core fibers were produced via melt spinning process and interfacial adhesion was investigated through techniques (tensile test, dynamic mechanical thermal analysis (DMTA), Wide Angle Xray Diffraction (WAXD), Differential scanning calorimetry (DSC), and Scanning Electron Microscope (SEM)). Based on the obtained results from the above mentioned techniques, the most suitable composition was produced in trilobal bicomponent fibers for thermal comfort fabrics. Simulation studies were also performed using Compuplast 3D FEM software to optimize the melt spinning process settings and produce trilobal bicomponent fibers.The textile made out of such innovative bicomponent fibers will show a self-actuation phenomenon are autonomous, self-empowered, and adaptive to the environment. This will help to mitigate the higher energy consumptions by conventional indoor heating, cooling, and ventilation systems and eventually minimizes the global energy consumptions and climate issues
Backe, Carin. « Enhancing textile electrode performance : Regulating moisture management through textile structure ». Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-12389.
Texte intégralKosturová, Andrea. « Vývoj tepelně izolačních a akusticko izolačních materiálů na bázi druhotných surovin z textilního průmyslu ». Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392320.
Texte intégralLivres sur le sujet "Moisture and thermal regulating textile"
(Editor), N. Pan, et P. Gibson (Editor), dir. Thermal and moisture transport in fibrous materials (Woodhead Publishing in Textiles). CRC, 2006.
Trouver le texte intégralChapitres de livres sur le sujet "Moisture and thermal regulating textile"
Ghaddar, Nesreen, et Kamel Ghali. « Modeling of Heat and Moisture Transfer in Porous Textile Medium Subject to External Wind : Improving Clothing Design ». Dans Handbook of Thermal Science and Engineering, 885–916. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-26695-4_40.
Texte intégralGhaddar, Nesreen, et Kamel Ghali. « Modeling of Heat and Moisture Transfer in Porous Textile Medium Subject to External Wind : Improving Clothing Design ». Dans Handbook of Thermal Science and Engineering, 1–32. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-32003-8_40-2.
Texte intégralJones, B., K. Ghali et N. Ghaddar. « Textile–body interactions and modelling issues ». Dans Thermal and moisture transport in fibrous materials. CRC Press, 2006. http://dx.doi.org/10.1201/9781439824351.ch12.
Texte intégralNaeem Akhtar, Muhammad, Muhammad Waseem Akhtar, Ashfaq Ahmad Rahi et Tanveer ul Haq. « Enhancing Water Use Efficiency by Using Potassium-Efficient Cotton Cultivars Based on Morphological and Biochemical Characteristic ». Dans Best Crop Management and Processing Practices for Sustainable Cotton Production [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.112606.
Texte intégralTsybulskyi, Vitalii. « IMPROVEMENT OF CALCULATION METHOD OF ROAD PAVEMENT EMBANKMENT ON THE APPROACHES TO ROAD BRIDGES ». Dans Integration of traditional and innovation processes of development of modern science. Publishing House “Baltija Publishing”, 2020. http://dx.doi.org/10.30525/978-9934-26-021-6-41.
Texte intégralActes de conférences sur le sujet "Moisture and thermal regulating textile"
Yao, Bao-guo, Li-xia Yan et Yi Li. « Measurement system and precision analysis for thermal regulating properties evaluation of textile materials ». Dans International Symposium on Precision Engineering Measurement and Instrumentation 2012, sous la direction de Jie Lin. SPIE, 2013. http://dx.doi.org/10.1117/12.2014827.
Texte intégralKai, Xue, Li Jing, Hu Wensheng, Guo Chaofan et Du Pengcheng. « Cause Analysis and Improvement of Drain Regulating Valve Blockage in Nuclear Power Plant ». Dans 2022 29th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icone29-93344.
Texte intégralAyadi, Melek, Riadh Zouari, César Ségovia, Ayda Baffoun, Slah Msahli et Nicolas Brosse. « Development of Airlaid Non-Woven Panels for Building’s Thermal Insulation ». Dans 4th International Conference on Bio-Based Building Materials. Switzerland : Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.772.
Texte intégralLee, Kapo, Joanne Yip et Kit Lun Yick. « Investigating the Factors Affecting the Thermal and Tactile Comfort of Summer Undergarments ». Dans 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1001537.
Texte intégralNeves, M. M., J. L. Cunha, P. M. Arezes, C. P. Lea˜o, S. F. C. F. Teixeira, P. Lobarinhas et J. C. Teixeira. « IN2TEC : A Multidisciplinary Research Project Involving Researchers, Students and Industry ». Dans ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-14916.
Texte intégralSecan, Cristina, et Sunhilde Cuc. « Aspects Regarding the Physiological and Comfort Parameters in Shoes Made of Leather Substitutes ». Dans The 9th International Conference on Advanced Materials and Systems. INCDTP - Leather and Footwear Research Institute (ICPI), Bucharest, Romania, 2022. http://dx.doi.org/10.24264/icams-2022.iv.13.
Texte intégral