Littérature scientifique sur le sujet « Microscale fabrication process »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Microscale fabrication process ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Microscale fabrication process"
Ghaznavi, Amirreza, Jie Xu et Seth A. Hara. « A Non-Sacrificial 3D Printing Process for Fabricating Integrated Micro/Mesoscale Molds ». Micromachines 14, no 7 (30 juin 2023) : 1363. http://dx.doi.org/10.3390/mi14071363.
Texte intégralBley, P. « The Liga Process for Fabrication of Three-Dimensional Microscale Structures ». Interdisciplinary Science Reviews 18, no 3 (septembre 1993) : 267–72. http://dx.doi.org/10.1179/isr.1993.18.3.267.
Texte intégralSugimoto, Ryota, Ju Hun Lee, Ju-Hyuck Lee, Hyo-Eon Jin, So Young Yoo et Seung-Wuk Lee. « Bacteriophage nanofiber fabrication using near field electrospinning ». RSC Advances 9, no 67 (2019) : 39111–18. http://dx.doi.org/10.1039/c9ra07510k.
Texte intégralKim, Kangil, Jae Keun Lee, Seung Ju Han et Sangmin Lee. « A Novel Top-Down Fabrication Process for Vertically-Stacked Silicon-Nanowire Array ». Applied Sciences 10, no 3 (8 février 2020) : 1146. http://dx.doi.org/10.3390/app10031146.
Texte intégralBunea, Ada-Ioana, Nuria del Castillo Iniesta, Ariadni Droumpali, Alexandre Emmanuel Wetzel, Einstom Engay et Rafael Taboryski. « Micro 3D Printing by Two-Photon Polymerization : Configurations and Parameters for the Nanoscribe System ». Micro 1, no 2 (25 septembre 2021) : 164–80. http://dx.doi.org/10.3390/micro1020013.
Texte intégralChoi, Jinwoong, Myeonghyeon Cho et Bumjoo Kim. « Fabrication of Nonconductive Microscale Patterns on Ion Exchange Membrane by Laser Process ». Korean Journal of Materials Research 33, no 2 (27 février 2023) : 71–76. http://dx.doi.org/10.3740/mrsk.2023.33.2.71.
Texte intégralYang, Zhuo Qing, Hong Wang, Zheng Jie Zhang, Gui Fu Ding, Xiao Lin Zhao et Chun Yan Jiang. « Fabrication and Mechanical Characterization of a Microscale Electrophoretic Polymer Based on MEMS Technology ». Advanced Materials Research 422 (décembre 2011) : 375–78. http://dx.doi.org/10.4028/www.scientific.net/amr.422.375.
Texte intégralTang, Min Jin, Hui Min Xie, Jian Guo Zhu, Peng Wan Chen, Qing Ming Zhang et Xiao Jun Li. « A New Moiré Grating Fabrication Technique Using Hot Embossing Lithography ». Applied Mechanics and Materials 83 (juillet 2011) : 7–12. http://dx.doi.org/10.4028/www.scientific.net/amm.83.7.
Texte intégralHerrera-Loya, Maite R., L. Mariana Cervantes-Herrera, Sofia Gutierrez-Vallejo et Jorge G. Ibanez. « Leaded or unleaded ? Homemade microscale tin electroplating ». Chemistry Teacher International 4, no 1 (1 mars 2022) : 97–102. http://dx.doi.org/10.1515/cti-2021-0024.
Texte intégralPark, Seorin, Da Young Lee et Sunghun Cho. « Development of Light-Scribing Process Using L-Ascorbic Acid for Graphene Micro-Supercapacitor ». Micromachines 15, no 7 (30 juin 2024) : 858. http://dx.doi.org/10.3390/mi15070858.
Texte intégralThèses sur le sujet "Microscale fabrication process"
Young-Waithe, Karen (Karen A. ). 1960. « Process design, development and fabrication of InAs homojunction converter cells for microscale thermophotovoltaic application ». Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/86597.
Texte intégralIncludes bibliographical references (p. 179-182).
by Karen Young-Waithe.
S.M.
Hem, Sopheasith. « Nonlinear epitaxial functional oxide-based resonant sensors ». Electronic Thesis or Diss., université Paris-Saclay, 2023. http://www.theses.fr/2023UPAST220.
Texte intégralThe detection of weak magnetic field signals has gained significant attention for its potential applications in fields such as medicine, geophysics, and nanotechnology. Various methods, including Superconducting Quantum Interference Devices (SQUIDs), optically pumped magnetometers (diamond sensors), and magnetoelectric (ME) resonators, have been used to enhance the detection of these weak signals. The choice of detection method depends on factors such as application context, available resources, cost, and sensitivity requirements. Among these methods, MEMS ME resonator-based sensors have garnered attention due to their design flexibility, compactness, and compatibility with integrated circuits. In these microscale resonators, the interaction between magnetostrictive and piezoelectric thin films enables a strain-mediated effect at micro- and nano-scales, resulting in high precision and spatial-temporal resolution. The thesis delves into the nonlinear regime in resonator operation, characterized by nonlinearity in vibrational responses, including asymmetrical peak shapes, multivalued responses, bifurcations, and nonlinear resonances. The nonlinear regime, particularly bifurcation, promises enhanced sensing capabilities and analog operation modes by sweeping the excitation frequency. Despite challenges like noise-activated stochastic switching, the nonlinear regime is valuable for detecting weak signals. Bistability in resonators within the nonlinear regime, underutilized in piezoelectric configurations, is explored. A proof-of-concept device quantifies signal changes through jumping frequency. Mathematically, differential equations are transformed into normalized Duffing equations using Galerkin's method, enabling dynamic behaviors to manifest through coefficients. Distinct models accommodate various conditions and assumptions, revealing connections between mechanical parameters and normalized coefficients in linear and nonlinear regimes. Bridging the gap between vibrational amplitude-based models and impedance data is complex but achievable. Experiments and iterative model refinement provide insights into frequency responses. Limitations regarding the neutral axis in monolayer thin films are acknowledged, with suggestions to reevaluate assumptions, consider multilayer effects, and employ numerical simulations. A relative neutral axis concept is introduced, transparently justified, and aligned with observed experimental behavior. The nonlinear regime widens resonance peaks, enhancing sensitivity in magnetic field detection. Parameters like piezoelectric and dielectric coefficients influence the transition to the nonlinear regime. The research extends beyond ideal scenarios, requiring further investigation to replicate the bifurcation regime under different conditions. In parallel, the fabrication of PZT-based microcantilevers, vital components of the resonant sensor, underwent multiple iterations to address challenges. These iterative improvements resulted in a more robust and reliable fabrication process. In conclusion, this study advanced the understanding of piezoelectrically actuated resonators and their potential applications in weak signal detection. The iterative fabrication enhancements and mathematical models contributed to the development of multifunctional sensing devices. The research also emphasized the importance of bridging the gap between vibrational amplitude-based models and impedance data. Finally, it shed light on the intricate interplay of nonlinearity and resonance in resonator systems, providing insights for future investigations and practical applications
Chapitres de livres sur le sujet "Microscale fabrication process"
Simpson, Michael L., et Gary S. Sayler. « The Device Science of Whole Cells as Components in Microscale and Nanoscale Systems ». Dans Cellular Computing. Oxford University Press, 2004. http://dx.doi.org/10.1093/oso/9780195155396.003.0009.
Texte intégralHuang, Weidong, Zihan Wang, Bo Wang, Xianli Liu et Xiaoju Lu. « Implant Development Using 3D Printing with Polylactic Acid-Based Polymer ». Dans Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230027.
Texte intégralActes de conférences sur le sujet "Microscale fabrication process"
Dash, Susmita, Niru Kumari, Mercy Dicuangco et Suresh V. Garimella. « Single-Step Fabrication and Characterization of Ultrahydrophobic Surfaces With Hierarchical Roughness ». Dans ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/ipack2011-52046.
Texte intégralSherehiy, Andriy, Andres Montenegro, Danming Wei et Dan O. Popa. « Adhesive Deposition Process Characterization for Microstructure Assembly ». Dans ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63929.
Texte intégralDiBartolomeo, Franklin J., et Christine A. Trinkle. « High Throughput Continuous Fabrication of Large Surface Area Microstructured PDMS ». Dans ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10383.
Texte intégralBastwros, Mina, Miao Liu, Nicholas Orlowsky et Gap-Yong Kim. « Effects of Reinforcement Particle Size on Cold Roll Bonded (CRB) Al1100 Laminate Composites ». Dans ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9469.
Texte intégralKhuushi, Sanjay Kumar Srinivasan, Chandantaru Dey Modak, Arvind Kumar, Abinash Tripathy et Prosenjit Sen. « A Maskless Process for Fabrication of Patterned Surfaces with Microscale Superhydrophobic Borders for High Throughput Droplet Microarray Printing ». Dans 2019 IEEE 32nd International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2019. http://dx.doi.org/10.1109/memsys.2019.8870702.
Texte intégralRen, Jing, et Sriram Sundararajan. « Microfluidic Channel Fabrication With Tailored Wall Roughness ». Dans ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7328.
Texte intégralThorsen, Todd A. « Microfluidic Logic : Addressing Complexity at the Microscale ». Dans ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42982.
Texte intégralRoy, Nilabh, Obehi Dibua, Chee Seng Foong et Michael Cullinan. « Preliminary Results on the Fabrication of Interconnect Structures Using Microscale Selective Laser Sintering ». Dans ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2017 Conference on Information Storage and Processing Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/ipack2017-74173.
Texte intégralOk, Jeong Tae, Eugene Lopez-On˜a, Daniel Sang-Won Park, Harris Wong et Sunggook Park. « Fabrication of 3-D Superhydrophobic Micro-Ratchets via Combined Thermal Imprint Lithography and Photolithography ». Dans ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67880.
Texte intégralLee, Choongyeop, et Chang-Jin “C J. ”. Kim. « Fabrication of Superhydrophobic Microstructures With Nanostructured Sidewalls Designed to Maximize Giant Liquid Slip ». Dans ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer. ASMEDC, 2009. http://dx.doi.org/10.1115/mnhmt2009-18535.
Texte intégral