Livres sur le sujet « Micromechanic model »

Altus, Eli. Fatigue of hybrid composites by a cohesive micromechanic model. Haifa, Isreal : Faculty of Mechanical Engineering, Technion - Israel Institute of Technology, 1991.

P, Wriggers, dir. Introduction to computational micromechanics. Berlin : Springer, 2005.

Gu, Xiaohong. Micromechanics of model carbon-fibre/epoxy-resin composites. Manchester : UMIST, 1995.

Zohdi, Tarek I. An introduction to computational micromechanics. Berlin : Springer, 2008.

V, Sankar Bhavani, et Langley Research Center, dir. Micromechanical models for textile structural composites. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1995.

Kang, Hsü, et United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., dir. Micromechanical model of crack growth in fiber reinforced ceramics. [Washington, DC] : National Aeronautics and Space Administration, Scientific and Technical Information Division, 1990.

M, Arnold Steven, et United States. National Aeronautics and Space Administration., dir. Micromechanics analysis code (MAC) : User guide. [Washington, DC] : National Aeronautics and Space Administration, 1994.

Z, Voyiadjis G., Ju J. W et U.S. National Congress of Applied Mechanics (12th : 1994 : University of Washington, Seattle), dir. Inelasticity and micromechanics of metal matrix composites. Amsterdam : Elsevier, 1994.

-B, Mühlhaus H., dir. Continuum models for materials with microstructure. Chichester, England : Wiley, 1995.

United States. National Aeronautics and Space Administration., dir. COMGEN-BEM : Boundary element model generation for composite materials micromechanical analysis. Washington, DC : National Aeronautics and Space Administration, 1992.

United States. National Aeronautics and Space Administration., dir. COMGEN-BEM : Boundary element model generation for composite materials micromechanical analysis. Washington, DC : National Aeronautics and Space Administration, 1992.

F, Shih C., Anderson T. L. 1957-, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering., University of Illinois at Urbana-Champaign. Dept. of Civil Engineering., Brown University. Division of Engineering., Texas A & M University. Dept. of Mechanical Engineering. et Naval Surface Warfare Center (U.S.). Annapolis Detachment., dir. Continuum and micromechanics treatment of constraint in fracture. Washington, DC : Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1993.

J, Birt Michael, et Langley Research Center, dir. Evaluation of several micromechanics models for discontinuously reinforced metal matrix composites. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1990.

Jong-Won, Lee, et Langley Research Center, dir. A micromechanics model of the stiffness and strength of laminates with fiber waviness. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1988.

Brzesowsky, Rolf. Micromechanics of sand grain failure and sand compaction. [Utrecht : Faculteit Aardwetenschappen, Universiteit Utrecht, 1996.

D, Comiskey Michele, Bednarcyk Brett A et NASA Glenn Research Center, dir. Micromechanics Analysis Code post-processing (MACPOST) user guide. [Cleveland, Ohio] : National Aeronautics and Space Administration, Glenn Research Center, 1999.

A, Bednarcyk Brett, et United States. National Aeronautics and Space Administration., dir. An efficient implementation of the GMC micromechanics model for multi-phased materials with complex microstructures. [Washington, DC : National Aeronautics and Space Administration, 1997.

A, Bednarcyk Brett, et United States. National Aeronautics and Space Administration., dir. An efficient implementation of the GMC micromechanics model for multi-phased materials with complex microstructures. [Washington, DC : National Aeronautics and Space Administration, 1997.

United States. National Aeronautics and Space Administration., dir. On the finite element implementation of the generalized method of cells micromechanics constitutive model. [Washington, DC] : National Aeronautics and Space Administration, 1995.

Wiesner, C. S. A review of micromechanical failure models for cleavage and ductile fracture. Cambridge : TWI, 1997.

Lee, D. H. A review of current micromechanical models of the unit fibrous cell. Christchurch : WRONZ, 1990.

1951-, Pindera M. J., et United States. National Aeronautics and Space Administration., dir. Micromechanics of metal matrix composites using the generalized method of cells model (GMC) user's guide. [Washington, DC : National Aeronautics and Space Administration, 1992.

1951-, Pindera M. J., et United States. National Aeronautics and Space Administration., dir. Micromechanics of metal matrix composites using the generalized method of cells model (GMC) user's guide. [Washington, DC : National Aeronautics and Space Administration, 1992.

1951-, Pindera M. J., et United States. National Aeronautics and Space Administration., dir. Micromechanical modeling of woven metal matrix composites : [final contractor report]. [Washington, DC : National Aeronautics and Space Administration, 1997.

1951-, Pindera M. J., et United States. National Aeronautics and Space Administration., dir. Micromechanical modeling of woven metal matrix composites : [final contractor report]. [Washington, DC : National Aeronautics and Space Administration, 1997.

1951-, Pindera M. J., et United States. National Aeronautics and Space Administration., dir. Micromechanical modeling of woven metal matrix composites : [final contractor report]. [Washington, DC : National Aeronautics and Space Administration, 1997.

Ghosh, Somnath. Micromechanical analysis and multi-scale modeling using the Voronoi cell finite element method. Boca Raton, FL : CRC Press, 2011.

M, Zbib Hussein, Demir Ismail 1960-, Zhu Hong-tao, American Society of Mechanical Engineers. Applied Mechanics Division., American Society of Mechanical Engineers. Materials Division. et Joint ASME Applied Mechanics and Materials Summer Meeting (1995 : Los Angeles, Calif.), dir. Micromechanics and constitutive modelling of composite materials : Presented at the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, Los Angeles, California, June 28-30, 1995. New York : American Society of Mechanical Engineers, 1995.

Silvestre, Nuno. Advanced computational nanomechanics. Chichester, West Sussex, United Kingdom : John Wiley & Sons Inc., 2016.

C, Pauly Christopher, Pindera M. J. 1951- et United States. National Aeronautics and Space Administration., dir. Experimental characterization and micromechanical modeling of woven carbon/copper composites. [Washington, D.C.] : National Aeronautics and Space Administration, 1997.

M, Arnold Steven, et United States. National Aeronautics and Space Administration., dir. Critique of macro flow/damage surface representations for metal matrix composites using micromechanics. [Washington, D.C : National Aeronautics and Space Administration, 1996.

L, Bradley Walter, Texas A & M University. Mechanics and Materials Center. et United States. National Aeronautics and Space Administration., dir. Micromechanics of compression failures in open hole composite laminates : A report. College Station, Tex : Mechanics and Materials Center, Texas A&M University, 1987.

1933-, Dvorak George J., Lagoudas Dimitris C, American Society of Mechanical Engineers. Winter Meeting, American Society of Mechanical Engineers. Applied Mechanics Division. et American Society of Mechanical Engineers. Materials Division., dir. Microcracking-induced damage in composites : Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, Texas, November 25-30, 1990. New York, N.Y : The Society, 1990.

Dormieux, Luc. Microporomechanics. New York : John Wiley & Sons, Ltd., 2006.

M, Mehrabadi M., American Society of Mechanical Engineers. Materials Division. et American Society of Mechanical Engineers. Winter Meeting, dir. Mechanics of granular materials and powder systems : Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York : ASME, 1992.

Microporomechanics. Chichester, UK : John Wiley & Sons, 2007.

A, Meguid S., American Society of Mechanical Engineers. Applied Mechanics Division., American Society of Mechanical Engineers. Materials Division. et Joint ASME Applied Mechanics and Materials Summer Meeting (1995 : Los Angeles, Calif.), dir. Micromechanical modelling and damage characterization of advanced materials : Presented at the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, Los Angeles, California, June 28-30, 1995. New York, N.Y : American Society of Mechanical Engineers, 1995.

1955-, Benson D. J., Asaro Robert J, American Society of Mechanical Engineers. Winter Meeting, American Society of Mechanical Engineers. Applied Mechanics Division. et American Society of Mechanical Engineers. Pressure Vessels and Piping Division., dir. Advanced computational methods for material modeling : Presented at the 1993 ASME Winter Annual Meeting, New Orleans, Louisiana, November 28-December 3, 1993. New York : American Society of Mechanical Engineers, 1993.

Center, NASA Glenn Research, dir. Strain rate dependent deformation and strength modeling of a polymer matrix composite utilizing a micromechanics approach. [Cleveland, Ohio] : National Aeronautics and Space Administration, Glenn Research Center, 1999.

Heinz, Konietzky, dir. Numerical modeling in micromechanics via particle methods : Proceedings of the 1st International PFC Symposium, Gelsenkirchen, Germany, 6-8 November 2002. Lisse : Balkema, 2003.

Mishnaevsky, L. Computational mesomechanics of composites : Numerical analysis of the effect of microstructures of composites on their strength and damage resistance. Chichester, West Sussex, England : John Wiley, 2007.

Mishnaevsky, Leon L. Jr. Computational Mesomechanics of Composites. New York : John Wiley & Sons, Ltd., 2007.

IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity (1997 Bochum, Germany). IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity : Proceedings of the IUTAM symposium held in Bochum, Germany, 25-29 August 1997. New York : Kluwer Academic Publishers, 2002.

D, Roberts Gary, Gilat Amos et NASA Glenn Research Center, dir. Implementation of an associative flow rule including hydrostatic stress effects into the high strain rate deformation analysis of polymer matrix composites. [Cleveland, Ohio] : National Aeronautics and Space Administration, Glenn Research Center, 2003.

IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity (1997 Bochum, Germany). IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity : Proceedings of the IUTAM symposium held in Bochum, Germany, 25-29 August 1997. Dordrecht : Kluwer Academic Publishers, 1999.

1948-, Varadan V. V., Society of Photo-optical Instrumentation Engineers., Society for Experimental Mechanics (U.S.), Air Force Research Laboratory (Wright-Patterson Air Force Base, Ohio), Nihon Seramikkusu Kyōkai et Intelligent Materials Forum (Mitō Kagaku Gijutsu Kyōkai), dir. Smart structures and materials 2000. : 6-9 March, 2000, Newport Beach, USA. Bellingham, Washington : SPIE, 2000.

Saravanos, D. A. Optimal fabrication processes for unidirectional metal-matrix composites : A computational simulation. [Washington, D.C.] : NASA, 1990.

Saravanos, D. A. Computational simulation of damping in composite structures. [Washington, D.C.] : National Aeronautics and Space Administration, 1990.

C, Chamis C., et United States. National Aeronautics and Space Administration., dir. Computational simulation of damping in composite structures. [Washington, D.C.] : National Aeronautics and Space Administration, 1990.

1948-, Varadan V. V., Chandra J, Society of Photo-optical Instrumentation Engineers., American Society of Mechanical Engineers. et Wright Laboratory (Wright-Patterson Air Force Base, Ohio), dir. Smart structures and materials 1996. Bellingham, Wash : SPIE, 1996.