Littérature scientifique sur le sujet « METALLURGICAL INVESTIGATION »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « METALLURGICAL INVESTIGATION ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "METALLURGICAL INVESTIGATION"
Reitz, W. « Metallurgical investigation into an automotive fire ». Journal of Failure Analysis and Prevention 6, no 2 (avril 2006) : 20–23. http://dx.doi.org/10.1361/154770206x99280.
Texte intégralBhaumik, S. K., T. A. Bhaskaran, R. Rangaraju, M. A. Venkataswamy, M. A. Parameswara et R. V. Krishnan. « Metallurgical investigation of defective superalloy rings ». Engineering Failure Analysis 11, no 3 (juin 2004) : 449–62. http://dx.doi.org/10.1016/j.engfailanal.2003.05.019.
Texte intégralXiaolei, Xu, et Yu Zhiwei. « Metallurgical investigation on cracked plunger-sleeves ». Engineering Failure Analysis 16, no 5 (juillet 2009) : 1740–48. http://dx.doi.org/10.1016/j.engfailanal.2009.01.001.
Texte intégralSzumiata, Tadeusz, Marzena Rachwał, Tadeusz Magiera, Katarzyna Brzózka, Małgorzata Gzik-Szumiata, Michał Gawroński, Bogumił Górka et Joanna Kyzioł-Komosińska. « Iron-containing phases in metallurgical and coke dusts as well as in bog iron ore ». Nukleonika 62, no 2 (27 juin 2017) : 187–95. http://dx.doi.org/10.1515/nuka-2017-0029.
Texte intégralZivkovic, D., N. Strbac, J. Lamut, B. Andjelic, M. Cocic, M. Steharnik et A. Mitovski. « Investigation of archaeometallurgical findings from Felix Romuliana locality ». Journal of Mining and Metallurgy, Section B : Metallurgy 45, no 2 (2009) : 207–12. http://dx.doi.org/10.2298/jmmb0902207z.
Texte intégralNeidel, A., E. Cagliyan et B. Fischer. « Metallurgical Failure Investigation of Fractured Spring Seals ». Practical Metallography 58, no 8 (1 août 2021) : 539–49. http://dx.doi.org/10.1515/pm-2021-0041.
Texte intégralVasiltsov, V. S., et M. S. Nysh. « EXPLICATION OF THE INVESTMENT POLICY ESSENCE BY THE CASE OF METALLURGICAL SECTOR COMPLEX ». Bulletin of Udmurt University. Series Economics and Law 31, no 2 (20 avril 2021) : 204–14. http://dx.doi.org/10.35634/2412-9593-2021-31-2-204-214.
Texte intégralBondarenko, N., et A. Nesterova. « Investigation of the development status and provision with fixed assets of the metallurgical industry of Ukraine ». Galic'kij ekonomičnij visnik 70, no 3 (2021) : 178–87. http://dx.doi.org/10.33108/galicianvisnyk_tntu2021.03.178.
Texte intégralLi, Zhang, S. L. Gobbi, F. Bonollo, A. Tiziani et G. Fontana. « Metallurgical investigation of laser welds in wrought Waspaloy ». Science and Technology of Welding and Joining 3, no 1 (février 1998) : 1–7. http://dx.doi.org/10.1179/stw.1998.3.1.1.
Texte intégralCorni, F., C. Nobili, G. Ottaviani, R. Tonini, B. Grignaffini Gregorio et G. Queirolo. « Metallurgical and electrical investigation of Pt5Ni95/silicon interactions ». Applied Surface Science 91, no 1-4 (octobre 1995) : 107–11. http://dx.doi.org/10.1016/0169-4332(95)00104-2.
Texte intégralThèses sur le sujet "METALLURGICAL INVESTIGATION"
Adolphe, Warren James. « Application of PIV technique for the investigation of flow features within metallurgical vessels ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0002/MQ40981.pdf.
Texte intégralIsmail, Mohamed. « An investigation into the use of petroleum coke as a substitute for metallurgical coke ». Thesis, University of Nottingham, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.663253.
Texte intégralKoo, Hyung-Hoi. « A metallurgical investigation into the friction welding of rapidly-solidified, dispersion-strengthened aluminum alloys / ». The Ohio State University, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=osu148775868016277.
Texte intégralAldén, Rickard. « Metallurgical investigation in weldability of Aluminium Silicon coated boron steel with different coating thickness ». Thesis, KTH, Materialvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-171209.
Texte intégralNosal, P. E. « Metallurgical investigation of hyperbaric welding at pressures to 250-bar for repairs to deep sea pipelines ». Thesis, Cranfield University, 2001. http://dspace.lib.cranfield.ac.uk/handle/1826/11029.
Texte intégralStella, Piergiorgio. « Powder metallurgy : investigation of metallurgical and technological aspects and potential applications for critical components of turbomachineries ». Doctoral thesis, Università degli studi di Trento, 2016. https://hdl.handle.net/11572/369124.
Texte intégralStella, Piergiorgio. « Powder metallurgy : investigation of metallurgical and technological aspects and potential applications for critical components of turbomachineries ». Doctoral thesis, University of Trento, 2016. http://eprints-phd.biblio.unitn.it/1688/1/PhD_tesi_STELLA.pdf.
Texte intégralHeinrich, Glen Sean. « An investigation into the use of froth colour as sensor for metallurgical grade in a copper system ». Master's thesis, University of Cape Town, 2003. http://hdl.handle.net/11427/15427.
Texte intégralIn recent years the development of Machine Vision systems has opened up new possibilities for non-intrusive process performance sensors and process control. There are currently various Machine Vision systems on notation plants worldwide (Metso at Kennecott, Frothcam at Escondida). Extensive research has been done on using froth image analysis in closed loop control (Hyotyniemi et aI, 2000; Kittel et aI, 2001; Holtham and Nguyen, 2002; Cipriano et aI, 1998) and recently plants have been using these systems to control the air or level of a flotation cell as a means of controlling mass pull using the froth velocity output. As yet no flotation plants have reported the use of froth colour in their control strategies, however it is well accepted that an experienced operator can judge the metallurgical state of a flotation cell by the appearance of the froth, using colour as a key descriptor of grade, particularly in the case of copper froths. For this reason an investigation was undertaken to evaluate whether a relationship existed between concentrate grade and the froth colour obtained using a Machine Vision system. This relationship could be used to control reagent addition or for system diagnostics. Both would be invaluable tools for the flotation industry. A Machine Vision system called SmartFroth has been developed at University of Cape Town (VCT) as a research tool to investigate the relationships between froth surface indicators and metallurgical parameters. The relationship between froth colour and % solids was also investigated as it was believed that solids loading could be reflected by froth colour. This work was aimed at evaluating the empirical relationship between froth colour and copper grade in the laboratory and then investigating whether a similar relationship existed on plant. Various colour spaces were examined to find one appropriate for the copper flotation froths in order to allow for accurate colour analysis. It also evaluated the use of calibration objects in the colour analysis of flotation froths. This work also evaluated relating froth colour to % solids on plant. Two batch flotation campaigns were done using different ores as well as a preliminary plant trial.
Garpenquist, Simon, et Carl Erik Sebastian Lindfors. « Practical investigation of mixing phenomena by physical modelling : Scaling criteria applied for bottom gas-stirred water modelling of metallurgical vessels ». Thesis, KTH, Materialvetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-298410.
Texte intégralGasomrörning är för tillfället den vanligaste metoden som används för att homogenisera flytande stål i kommersiella processer. På grund av de svåra förhållandena under processen har fysiska modeller, byggda av exempelvis plexiglas, använts. Detta för att enklare förstå de komplexa fenomen som uppstår under processen. Modellerna används också för att optimera omrörningsförhållandena och för att uppskatta blandningstider. Istället för flytande stål har vatten använts vid modellering för att öka säkerheten och minska kostnaderna. Vattenmodellerna är vanligtvis nedskalade till storlekar som är lättare att hantera. En korrekt skalning kräver att vanliga kriterier och dimensionslösa tal uppfylls. Denna rapport undersökte noggrannheten för dessa dimensionslösa tal samt relationer som vanligtvis används vid skalning. Befintliga studier och relationer utvärderades och de teoretiskt mest lämpliga skalningsekvationerna testades. Tre stycken kärl med bottenblåsning byggdes för att testa dessa relationer. Genom att tillämpa skalningskriterier och beräkna gasflödeshastigheterna, kunde korrelationen mellan de teoretiska och uppmätta blandningstiderna undersökas. Denna avhandling drog slutsatsen att korrelationen mellan de uppmätta blandningstiderna inte var signifikant. Dock verkade en bättre approximation fås när skalfaktorn λ1/2 implementerades.
Ersson, Mikael. « Fundamental Experimental and Numerical Investigation Focusing on the Initial Stage of a Top-Blown Converter Process ». Doctoral thesis, KTH, Tillämpad processmetallurgi, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-9310.
Texte intégralQC 20100720
Livres sur le sujet "METALLURGICAL INVESTIGATION"
U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering. et Argonne National Laboratory. Materials and Components Technology Division., dir. TMI-2 vessel investigation project (VIP) metallurgical program. Washington, DC : Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1990.
Trouver le texte intégralW, Bohl Robert, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering. et Argonne National Laboratory, dir. Peer review of the Three Mile Island unit 2 vessel investigation project metallurgical examinations. Washington, DC : Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1994.
Trouver le texte intégralB, Ross Robert. Investigating mechanical failures : The metallurgist's approach. London : Chapman & Hall, 1995.
Trouver le texte intégralRoss, Robert B. Investigating mechanical failures : The metallurgists's approach. London : Chapman & Hall, 1995.
Trouver le texte intégralTMI-2 vessel investigation project (VIP) metallurgical program. Washington, DC : Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1990.
Trouver le texte intégralDiercks, D. R. TMI-2 vessel investigation project (VIP) metallurgical program. Supt. of Docs., U.S. G.P.O. [distributor, 1990.
Trouver le texte intégralCormick, Craig, dir. Ned Kelly. CSIRO Publishing, 2014. http://dx.doi.org/10.1071/9781486301775.
Texte intégralChapitres de livres sur le sujet "METALLURGICAL INVESTIGATION"
Danielsen, Hilmar Kjartansson, Somrita Dhar, Carsten Jørn Rasmussen et Dorte Juul Jensen. « Metallurgical Investigation of Crossing Noses ». Dans Springer Series in Reliability Engineering, 81–91. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-62472-9_5.
Texte intégralSmith-Hanssen, Nicholas, Gøril Jahrsengene et Eli Ringdalen. « Biocarbon Materials in Metallurgical Processes—Investigation of Critical Properties ». Dans The Minerals, Metals & ; Materials Series, 165–77. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-22634-2_16.
Texte intégralSteinacker, Stephan R., et Juergen Antrekowitsch. « Kinetic Investigation of the Electric Furnace Copper Slag Treatment ». Dans 7th International Symposium on High-Temperature Metallurgical Processing, 101–7. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48093-0_13.
Texte intégralBasag, Sedef Pinar, Ahmet Turan et Onuralp Yucel. « An Investigation on Antimony Production by Using Niederschlag Process ». Dans 7th International Symposium on High-Temperature Metallurgical Processing, 117–21. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48093-0_15.
Texte intégralSteinacker, Stephan R., et Juergen Antrekowitsch. « Kinetic Investigation of The Electric Furnace Copper Slag Treatment ». Dans 7th International Symposium on High-Temperature Metallurgical Processing, 101–7. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119274643.ch13.
Texte intégralBasag, Sedef Pinar, Ahmet Turan et Onuralp Yucel. « An Investigation on Antimony Production by Using Niederschlag Process ». Dans 7th International Symposium on High-Temperature Metallurgical Processing, 117–21. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119274643.ch15.
Texte intégralLiu, Jianhua, Yingwei Li, Lijun Liu, Jinhui Peng, Libo Zhang, Shenghui Guo, Huilong Luo, Hongpo Wang et Guo Chen. « Investigation on a Microwave High-Temperature Air Heat Exchanger ». Dans 2nd International Symposium on High-Temperature Metallurgical Processing, 119–24. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118062081.ch15.
Texte intégralYucel, Onuralp, Mehmet Bugdayci et Ahmet Turan. « An Investigation on the Self-Propagating High Temperature Synthesis of TiB2 ». Dans 5th International Symposium on High-Temperature Metallurgical Processing, 147–51. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118887998.ch19.
Texte intégralFan, Xiao-hui, Li-shun Yuan, Min Gan, Wei Lv, Yi Wang et Xu-ling Chen. « An Investigation on Utilization of Ferrous Scrap by Could-Bonded Pelletizing ». Dans 4th International Symposium on High-Temperature Metallurgical Processing, 579–86. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118663448.ch70.
Texte intégralCheng, Gong, Lifeng Zhang, Wenbo Wang, Qiangqiang Wang et Piotr Roman Scheller. « Investigation on Clogging of Submerged Entry Nozzles for GCr15 Bearing Steels ». Dans 10th International Symposium on High-Temperature Metallurgical Processing, 309–17. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05955-2_29.
Texte intégralActes de conférences sur le sujet "METALLURGICAL INVESTIGATION"
Llorca, Fabrice. « Metallurgical Investigation of Dynamic Damage in Tantalum ». Dans SHOCK COMPRESSION OF CONDENSED MATTER - 2003 : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2004. http://dx.doi.org/10.1063/1.1780308.
Texte intégralAl-Ghadeer, Yousuf, Ali Al-Shawaf, Abduljabbar Khan et Syed Jainulaudeen Nisthar. « Metallurgical Failure Investigation of Cracked Steam Reformer Tubes ». Dans The 4th World Congress on Mechanical, Chemical, and Material Engineering. Avestia Publishing, 2018. http://dx.doi.org/10.11159/mmme18.120.
Texte intégralAbdulhadi, E., J.-M. Pelletier et M. Lambertin. « Metallurgical effects induced by laser cutting : Experimental and theoretical investigation ». Dans ICALEO® ‘97 : Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1997. http://dx.doi.org/10.2351/1.5059642.
Texte intégralDriscoll, Matthew, Eric McFetridge, Robert Neff et Peter Descar. « Metallurgical Investigation of LM2500 High Pressure Turbine (HPT) Blade Failures ». Dans ASME Turbo Expo 2012 : Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-68605.
Texte intégralShejale, Girish M., et David Ross. « Failure Investigation of 1st Stage Buckets From Frame 3002, 10 MW Gas Turbine Unit ». Dans ASME 2011 Turbo Expo : Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-46863.
Texte intégralZieris, R., G. Langner, L. M. Berger, S. Nowotny et E. Beyer. « Investigation of AlSi Coatings Prepared by Laser-Assisted Atmospheric Plasma Spraying of Internal Surfaces of Tubes ». Dans ITSC2004, sous la direction de Basil R. Marple et Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p0651.
Texte intégralCole, Kevin D., Martin Reed, Constantine M. Tarawneh et Brent M. Wilson. « A Metallurgical and Experimental Investigation Into Sources of Warm Bearing Trending ». Dans IEEE/ASME/ASCE 2008 Joint Rail Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/jrc2008-63028.
Texte intégralChen, Chaoyue, Yingchun Xie, Xinliang Xie, Sihao Deng, Hanlin Liao, Renzhong Huang et Zhongming Ren. « Investigation of Particle/Substrate Bonding Between Copper Powder and Different Substrates in Cold Spray ». Dans ITSC2018, sous la direction de F. Azarmi, K. Balani, H. Li, T. Eden, K. Shinoda, T. Hussain, F. L. Toma, Y. C. Lau et J. Veilleux. ASM International, 2018. http://dx.doi.org/10.31399/asm.cp.itsc2018p0262.
Texte intégralSlogar, Gerrick, Gary Prus et Benjamin Canilang. « ETF40B 3rd Vane Field Investigation : Root Cause and Corrective Action ». Dans ASME Turbo Expo 2013 : Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-94449.
Texte intégralMadison, Daniel P., Scott A. Miers, Glen L. Barna et Jay L. Richerson. « Comparison of Piston Temperature Measurement Methods : Templugs Versus Wireless Telemetry With Thermocouples ». Dans ASME 2012 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/icef2012-92184.
Texte intégralRapports d'organisations sur le sujet "METALLURGICAL INVESTIGATION"
Alexander, D. Metallurgical investigation of material from chill-water piping system. Office of Scientific and Technical Information (OSTI), février 1990. http://dx.doi.org/10.2172/7198799.
Texte intégralBohl, R. W., R. G. Gaydos, G. F. Vander Voort et D. R. Diercks. Peer review of the Three Mile Island Unit 2 Vessel Investigation Project metallurgical examinations. Office of Scientific and Technical Information (OSTI), juillet 1994. http://dx.doi.org/10.2172/10173981.
Texte intégralCialone et Williams. L51589 Investigation of Sulfide-Stress Cracking at Pipe Seam Welds. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), août 1989. http://dx.doi.org/10.55274/r0010331.
Texte intégralRicker, R. E., D. J. Pitchure, M. E. Williams et S. A. Claggett. Metallurgical Investigations into Corrosion Damage in Homes Constructed with Problem Drywall. Gaithersburg, MD : National Institute of Standards and Technology, août 2011. http://dx.doi.org/10.6028/nist.ir.7809.
Texte intégralUnknown, Author. L52043 SCC Initiation Susceptibility Ranking-Screening. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), septembre 2005. http://dx.doi.org/10.55274/r0011149.
Texte intégral