Bibliographies thématiques / Metallized film capacitor / Articles de revues
Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Metallized film capacitor.

Articles de revues sur le sujet « Metallized film capacitor »

Auteur : Grafiati
Publié le 21 décembre 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Metallized film capacitor ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Jia Zhanqiang, 贾占强, 蔡金燕 Cai Jinyan, 梁玉英 Liang Yuying et 韩春辉 Han Chunhui. « Reliability assessment of metallized film pulse capacitor ». High Power Laser and Particle Beams 23, no 1 (2011) : 272–76. http://dx.doi.org/10.3788/hplpb20112301.0272.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Vuillermet, Y., O. Chadebec, J. M. Lupin, A. Saker, G. Meunier et J. L. Coulomb. « Optimization of Low-Voltage Metallized Film Capacitor Geometry ». IEEE Transactions on Magnetics 43, no 4 (avril 2007) : 1569–72. http://dx.doi.org/10.1109/tmag.2007.892473.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ho, Janet, T. Jow et Steven Boggs. « Implications of advanced capacitor dielectrics for performance of metallized film capacitor windings ». IEEE Transactions on Dielectrics and Electrical Insulation 15, no 6 (décembre 2008) : 1754–60. http://dx.doi.org/10.1109/tdei.2008.4712681.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Du, Guoqiang, et Jie Zhang. « Capacitance Evaluation of Metallized Polypropylene Film Capacitors Considering Cumulative Self-Healing Damage ». Electronics 13, no 14 (22 juillet 2024) : 2886. http://dx.doi.org/10.3390/electronics13142886.

Texte intégral
Résumé :
Self-healing (SH) in metallized polypropylene film capacitors (MPPFCs) can lead to irreversible damage to electrode and dielectric structures, resulting in capacitance loss and significant stability degradation, especially under cumulative SH conditions. To enhance the reliability assessment of MPPFCs post-SH, this study conducted SH experiments on MPPFCs, examined the damage patterns of the electrodes and dielectric films, and proposed a novel capacitance evaluation method for MPPFCs under cumulative SH conditions. The results reveal that with increasing SH voltage, the number of dielectric layers experiencing single SH breakdowns rises, SH energy significantly escalates, and the loss area of the electrode due to high-temperature evaporation expands. Under cumulative SH conditions, the number of SH events is linearly correlated with the total number of SH-breakdown film layers and shows an exponential decay with the average single SH energy. By utilizing a Support Vector Machine (SVM) to classify the SH condition and damage features within the capacitor based on the correlation and distribution patterns of SH feature parameters, this study introduces an advanced method for evaluating the capacitance of MPPFCs under cumulative SH conditions. This method promises to improve the predictive maintenance and reliability of power electronic systems utilizing MPPFCs.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Li Hua, Lin Fuchang, Zhong Heqing, Dai Ling, Han Yongxia et Kong Zhonghua. « Study on Metallized Film Capacitor and Its Voltage Maintaining Performance ». IEEE Transactions on Magnetics 45, no 1 (janvier 2009) : 327–30. http://dx.doi.org/10.1109/tmag.2008.2008863.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Chen Yaohong, 陈耀红, 章妙 Zhang Miao, 李化 Li Hua, 林福昌 Lin Fuchang, 李智威 Li Zhiwei, 吕霏 Lü Fei et 刘德 Liu De. « Insulation resistance characteristics of metallized film capacitor under high electric field ». High Power Laser and Particle Beams 24, no 4 (2012) : 797–800. http://dx.doi.org/10.3788/hplpb20122404.0797.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Kong, M. G., et Y. P. Lee. « Impact of surface discharge plasmas on performance of a metallized film capacitor ». Journal of Applied Physics 90, no 6 (15 septembre 2001) : 3069–78. http://dx.doi.org/10.1063/1.1389072.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Li, Hua, Yaohong Chen, Fuchang Lin, Bo Peng, Fei Lv, Miao Zhang et Zhiwei Li. « The capacitance loss mechanism of metallized film capacitor under pulsed discharge condition ». IEEE Transactions on Dielectrics and Electrical Insulation 18, no 6 (décembre 2011) : 2089–94. http://dx.doi.org/10.1109/tdei.2011.6118648.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Dai, Xiying, Zhaoliang Xing, Wei Yang, Chong Zhang, Fei Li, Xin Chen, Chen Li, Jianjun Zhou et Lin Li. « The Effect of Annealing on the Structure and Electric Performance of Polypropylene Films ». International Journal of Polymer Science 2022 (8 novembre 2022) : 1–12. http://dx.doi.org/10.1155/2022/5970484.

Texte intégral
Résumé :
Biaxially oriented polypropylene (BOPP) and uniaxially oriented polypropylene (UOPP) films were annealed. The effect of annealing temperature (Ta) on dielectric strength was studied. The electric breakdown strength (Eb) of BOPP and UOPP films changes in a quite different trend with the annealing process. Eb of BOPP films decreases with the increase in Ta, whereas Eb of UOPP films increases first and then decreases with Ta. The structural changes during annealing were investigated. The crystallinity rises with Ta, while the orientation degree and Eb show a similar trend with Ta. Although the crystallinity and crystal structure can affect Eb of polypropylene films, the orientation of chain segments has a much larger correlation with Eb. Our results indicate that the deterioration of the metallized BOPP film capacitor may originate from the orientation degree decrease of chain segments after experiencing high temperature.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Yoon, Jung-Rag, Young-Kwang Kim, Serk-Won Lee et Heun-Young Lee. « The Design and Reliability Evaluation of Metallized Film Capacitor for Power Electronic Applications ». Journal of the Korean Institute of Electrical and Electronic Material Engineers 24, no 5 (1 mai 2011) : 381–86. http://dx.doi.org/10.4313/jkem.2011.24.5.381.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
11

Peng, Bao Hua, J. L. Zhou et Jing Feng. « Product Reliability Assessment Method Combining Degradation Data and Lifetime Data ». Advanced Materials Research 44-46 (juin 2008) : 795–802. http://dx.doi.org/10.4028/www.scientific.net/amr.44-46.795.

Texte intégral
Résumé :
Reliability of products has long been considered as an important quality characteristic. Traditional methods of product reliability assessment are based on lifetime data. With products being much more reliable and the growing need for developing new products within shorter period and at lower cost, we can hardly get enough lifetime data in many cases. Performance degradation data can also be used for reliability assessment. Recently, they are found to be useful in some cases where they are easier to collect. But when performance degradation data are also limited and some lifetime data are available, it is preferred to utilize both information sources. This paper deals with the problem of reliability assessment combining both performance degradation data and lifetime data. It is assumed that two samples from the same product are tested differently. Degradation data are collected from one sample and lifetime data from the other. First, the performance degradation model is established, using either statistical methods or methods from physics of failure. Then lifetime of the product, which is defined as the first time when the performance crosses the known failure threshold, is calculated. The MLE method is used for parameter estimation where the maximum likelihood function is multiplication of the one from degradation data and the one from lifetime data. To illustrate the proposed method, an example of the metallized film capacitor, which is used in inertial confinement fusion (ICF) facility, is given. We model the performance degradation data of metallized film capacitor with Wiener process with drift. The failure of the capacitor is defined as the first time when its capacitance drops below a threshold. The lifetime distribution is deduced and the parameters are estimated from the joint maximum likelihood function. A comparison is conducted between the assessment results of degradation data only and those of combination of degradation data and lifetime data. In conclusion we propose that both degradation information and lifetime information should be used when neither of them is sufficient enough for reliability assessment. Some directions for future work are also discussed.
Styles APA, Harvard, Vancouver, ISO, etc.
12

Tai, Yunxiao, Pengqi Chen, Yang Jian, Qingqing Fang, Dang Xu et Jigui Cheng. « Failure mechanism and life estimate of metallized film capacitor under high temperature and humidity ». Microelectronics Reliability 137 (octobre 2022) : 114755. http://dx.doi.org/10.1016/j.microrel.2022.114755.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
13

Zhang, Yong-Xin, Qi-Kun Feng, Shao-Long Zhong, Jia-Yao Pei, Fang-Yi Chen, Guan-Nan He et Zhi-Min Dang. « Digital twin accelerating development of metallized film capacitor : Key issues, framework design and prospects ». Energy Reports 7 (novembre 2021) : 7704–15. http://dx.doi.org/10.1016/j.egyr.2021.10.116.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
14

Lv, Chunlin, Jinjun Liu, Yan Zhang, Wanjun Lei et Rui Cao. « An improved lifetime prediction method for metallized film capacitor considering harmonics and degradation process ». Microelectronics Reliability 114 (novembre 2020) : 113892. http://dx.doi.org/10.1016/j.microrel.2020.113892.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Qi, Xiaoguang, et Steven Boggs. « Electrothermal failure of metallized film capacitor end connections–computation of temperature rise at connection spots ». Journal of Applied Physics 94, no 7 (octobre 2003) : 4449–56. http://dx.doi.org/10.1063/1.1602947.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
16

Chen, Yaohong, Hua Li, Fuchang Lin, Fei Lv, Miao Zhang, Zhiwei Li et De Liu. « Study on Self-Healing and Lifetime Characteristics of Metallized-Film Capacitor Under High Electric Field ». IEEE Transactions on Plasma Science 40, no 8 (août 2012) : 2014–19. http://dx.doi.org/10.1109/tps.2012.2200699.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
17

H. Lean, Meng, et Wei-Ping L. Chu. « Simulation of charge packet formation in layered polymer film ». COMPEL : The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 33, no 4 (1 juillet 2014) : 1396–415. http://dx.doi.org/10.1108/compel-09-2013-0291.

Texte intégral
Résumé :
Purpose – The purpose of this paper is to describe a rapid and robust axisymmetric hybrid algorithm to create dynamic temporal and spatial charge distributions, or charge map, in the simulation of bipolar charge injection using Schottky emission and Fowler-Nordheim tunneling, field-dependent transport, recombination, and bulk and interfacial trapping/de-trapping for layered polymer films spanning the range from initial injection to near breakdown. Design/methodology/approach – This hybrid algorithm uses a source distribution technique based on an axisymmetric boundary integral equation method (BIEM) to solve the Poisson equation and a fourth-order Runge-Kutta (RK4) method with an upwind scheme for time integration. Iterative stability is assured by satisfying the Courant-Friedrichs-Levy (CFL) stability criterion. Dynamic charge mapping is achieved by allowing conducting and insulating boundaries and material interfaces to be intuitively represented by equivalent free and bound charge distributions that collectively satisfy all local and far-field conditions. Findings – Charge packets cause substantial increase of electric stress and could accelerate the breakdown of polymeric capacitors. Conditions for the creation of charge packets are identified and numerically demonstrated for a combination of impulsive step excitation, high charge injection, and discontinuous interface. Originality/value – Metallized bi-axially oriented polypropylene (BOPP) dielectric thin film capacitor with self-clearing and enhanced current carrying capability offer an inexpensive and lightweight alternative for efficient power conditioning, energy storage, energy conversion, and pulsed power. The originality is the comprehensive physics and multi-dimensional modeling which span the dynamic range from initial injection to near breakdown. This model has been validated against some empirical data and may be used to identify failure mechanisms such as charge packets, gaseous voids, and electroluminescence. The value lies in the use of this model to develop mitigation strategies, including re-designs and materials matching, to avoid these failure mechanisms.
Styles APA, Harvard, Vancouver, ISO, etc.
18

Qi, Xiaoguang, et Steven Boggs. « Transient finite element computation of the temperature rise in metallized film capacitor end connections caused by underdamped discharge ». IEEE Transactions on Dielectrics and Electrical Insulation 15, no 1 (2008) : 277–83. http://dx.doi.org/10.1109/t-dei.2008.4446761.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Donhowe, Mark, Jeff Lawler, Sean Souffie et E. Lee Stein. « 250°C Operating Temperature Dielectric Film Capacitors ». Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2011, HITEN (1 janvier 2011) : 000201–6. http://dx.doi.org/10.4071/hiten-paper2-mdonhowe.

Texte intégral
Résumé :
High operating temperature electronic components are needed for a variety of military, aerospace, down-hole, and electric vehicle applications. One of the limiting technologies is the availability of highly reliable capacitors that operate at temperatures greater than 150°C and up through 250°C. This paper introduces a high breakdown strength dielectric film Gore has developed for metallized film capacitors. In addition to exceptionally high breakdown voltages, the 6 μm PTFE film exhibits low dissipation factor and stable capacitance over a wide temperature range. Film properties were tested from −50°C to 250°C and both wound film/foil and metallized film capacitors were fabricated and tested from RT to 300°C.
Styles APA, Harvard, Vancouver, ISO, etc.
20

Revenok, T. V., V. V. Sleptsov et A. O. Diteleva. « Research of electrode materials for the creation of multifunctional current sources with increased capacity as a components of the energy sector of an efficient urban environment ». Construction Materials, no 9 (9 octobre 2024) : 63–69. http://dx.doi.org/10.31659/0585-430x-2024-828-9-63-69.

Texte intégral
Résumé :
As part of creating a comfortable and safe environment, constructing energy-efficient residential and industrial buildings and structures that meet modern requirements and standards, the development of the production of environmentally friendly renewable and new individual energy sources is becoming especially relevant. In this regard, there is a need to increase the energy capacity of electrochemical cells. Research has been carried out on the metallized conductive materials creation based on rolled carbon non-woven material “Busofit” with the sequential application of metal coatings of titanium and silver using ion-plasma sputtering and electric pulse dispersion methods. It has been shown that surface layer metallization of the electrode material with titanium can improve the electrochemical cell characteristics. Additional silver film deposition leads to further cell performance improvement. It has been confirmed that the multilayer structure interfacial resistance between the carbon and the current collector has a significant effect on the conductivity of the electrochemical cell and the stability of its operation. The contact area increase of the electrode with the electrolyte leads to an increase in the rate processes occurring on the electrode surface and in the near-electrode space, which opens up prospects for increasing the energy intensity of the electrochemical system. A significant capacity increase of a water-based capacitor structure is achieved by the formation of a nanostructured dielectric layer of potassium titanate in the interelectrode space. It has been confirmed that the cell voltage cycling helps to stabilize the processes occurring in the surface layer of the electrode material at the interface and determining the range of mechanisms for transmitting electrical energy, which makes it possible to achieve higher energy intensity of the samples. Improvement of technological solutions in the field of ion-plasma technologies and the use of new perspective nanostructured materials creates the prerequisites for the creation of advanced automation and energy supply systems with a higher resource, which expands the possibilities of their use in various construction projects.
Styles APA, Harvard, Vancouver, ISO, etc.
21

Rytöluoto, Ilkka, Minna Niittymäki, Paolo Seri, Hadi Naderiallaf, Kari Lahti, Eetta Saarimäki, Timo Flyktman et Mika Paajanen. « Biaxially oriented silica–polypropylene nanocomposites for HVDC film capacitors : morphology-dielectric property relationships, and critical evaluation of the current progress and limitations ». Journal of Materials Chemistry A 10, no 6 (2022) : 3025–43. http://dx.doi.org/10.1039/d1ta10336a.

Texte intégral
Résumé :
Investigation of the processing–morphology–dielectric performance relationships of BOPP nanocomposites provides critical perspectives on the future prospects and challenges of polymer nanocomposites for high voltage metallized film capacitors.
Styles APA, Harvard, Vancouver, ISO, etc.
22

Li Hua, 李化, 陈耀红 Chen Yaohong, 林福昌 Lin Fuchang et 彭波 Peng Bo. « Lifetime characteristics of metallized film pulsed capacitors ». High Power Laser and Particle Beams 22, no 4 (2010) : 773–76. http://dx.doi.org/10.3788/hplpb20102204.0773.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
23

Joubert, Ch, A. Béroual et G. Rojat. « Asymmetrical current distribution in metallized film capacitors ». Journal of Applied Physics 95, no 11 (juin 2004) : 6420–25. http://dx.doi.org/10.1063/1.1712009.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
24

Ostrowski, Jörg, Ralf Hiptmair et Henning Fuhrmann. « Electric 3D‐simulation of metallized film capacitors ». COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 26, no 2 (10 avril 2007) : 524–43. http://dx.doi.org/10.1108/03321640710727836.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Belko, Victor, Ivan Ivanov, Andrey Plotnikov et Valery Belanov. « Energy characteristics of self-healing process in metallized film capacitors ». E3S Web of Conferences 140 (2019) : 02006. http://dx.doi.org/10.1051/e3sconf/201914002006.

Texte intégral
Résumé :
Metallized film capacitors widely used in energy applications were studied. The experimental method for investigation of energy and dynamic characteristics of self-healing processes in real metal-film capacitors was developed. The commercial PET and PP MFCs of 0.22 – 1 μF capacitance and 63–250 V voltage were tested. Depending on applied voltage, 3 types of SH processes in MFC were discovered: single, repetitive, and multiple SH. Dependencies of self-healing energy on breakdown voltage were obtained. These dependencies are described by power law with the exponent n = 2.2–2.4 that significantly differs from literature data. The obtained data will be used for degradation and aging laws formulation for capacitors’ energy storage capability improvement.
Styles APA, Harvard, Vancouver, ISO, etc.
26

Silvus, Stan, et Kenneth Cook. « Useful Technique for Analysis of Fluid-Filled Capacitors ». EDFA Technical Articles 9, no 2 (1 mai 2007) : 6–12. http://dx.doi.org/10.31399/asm.edfa.2007-2.p006.

Texte intégral
Résumé :
Abstract Fluid-filled metallized-polymer-film capacitors have unique failure mechanisms, many of which are related to insufficient fluid level, improper installation geometry, or both. Although such failures can be analyzed using X-ray testing equipment, it is often impractical or cost-prohibitive. This article describes some of the failure modes observed in fluid-filled capacitors and explains how to analyze them easily and inexpensively.
Styles APA, Harvard, Vancouver, ISO, etc.
27

Kong, M. G., et Y. P. Lee. « Electrically induced heat dissipation in metallized film capacitors ». IEEE Transactions on Dielectrics and Electrical Insulation 11, no 6 (décembre 2004) : 1007–13. http://dx.doi.org/10.1109/tdei.2004.1387824.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
28

Tortai, J. H., A. Denat et N. Bonifaci. « Self-healing of capacitors with metallized film technology : ». Journal of Electrostatics 53, no 2 (août 2001) : 159–69. http://dx.doi.org/10.1016/s0304-3886(01)00138-3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
29

Godec, M., Dj Mandrino et M. Gaberšček. « Investigation of performance degradation in metallized film capacitors ». Applied Surface Science 273 (mai 2013) : 465–71. http://dx.doi.org/10.1016/j.apsusc.2013.02.063.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
30

Kim, Namhun, Changju Park, Sangshin Kwak et Jeihoon Baek. « Experimental Comparisons and Evaluations of Different Types of DC-link Capacitors for VSI-Based Electric Compressors in Battery Electric Vehicle Systems ». Electronics 9, no 8 (8 août 2020) : 1276. http://dx.doi.org/10.3390/electronics9081276.

Texte intégral
Résumé :
Electric compressor systems for air conditioning operations are an essential part in battery electric vehicle systems, which are not applicable to conventional belt-driven compressors due to no combustion engines. Three-phase voltage source inverters (VSI) and interior permanent magnet (IPM) motors are generally used for electric compressor systems in battery electric vehicles. Direct current (DC)-link capacitors are a critical component in the power converter systems, which affect the cost, size, performances and scale. Metallized polypropylene film capacitors are considered more reliable than conventional electrolytic capacitors for high temperature environments such as electric vehicle applications. This paper presents comprehensive comparisons and evaluations of electric compressors with two types of DC-link capacitors. Based on a 5 kW IPM motor drives and a VSI with a nominal DC voltage of 360 V for electric compressors, performances with electrolytic and film capacitors have been evaluated by experimental tests.
Styles APA, Harvard, Vancouver, ISO, etc.
31

Kong, Zhong Hua, Li Gang Wu, Chun Ya Tong et Zai Fei Luo. « Calculation of Self-Healing Contract Resistance of Metallized Film ». Applied Mechanics and Materials 615 (août 2014) : 236–39. http://dx.doi.org/10.4028/www.scientific.net/amm.615.236.

Texte intégral
Résumé :
Abstract. Self-healing is an interesting property of metallized capacitors. contract resistance is importance to self healing. In the paper contract resistance is calculated with different diameters of hole and different thickness of metal layer. The larger is radius of hole, the less is contract resistance. The thicker is metal layer, the less is contract resistance.
Styles APA, Harvard, Vancouver, ISO, etc.
32

Picci, G., et M. Rabuffi. « Pulse handling capability of energy storage metallized film capacitors ». IEEE Transactions on Plasma Science 28, no 5 (2000) : 1603–6. http://dx.doi.org/10.1109/27.901241.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
33

Belko, Victor, Dmitry Glivenko, Oleg Emelyanov, Ivan Ivanov et Andrey Plotnikov. « Current Pulse Polarity Effect on Metallized Film Capacitors Failure ». IEEE Transactions on Plasma Science 45, no 6 (juin 2017) : 1020–25. http://dx.doi.org/10.1109/tps.2017.2703947.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
34

Li, Zhiwei, Hua Li, Fuchang Lin, Yaohong Chen, De Liu, Bowen Wang, Haoyuan Li et Qin Zhang. « Lifetime investigation and prediction of metallized polypropylene film capacitors ». Microelectronics Reliability 53, no 12 (décembre 2013) : 1962–67. http://dx.doi.org/10.1016/j.microrel.2013.06.005.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
35

Na, J. G. « New method to predict corrosion characteristics of Zn‐metallized thin films for film capacitors ». Journal of Vacuum Science & ; Technology A : Vacuum, Surfaces, and Films 13, no 6 (novembre 1995) : 2739–41. http://dx.doi.org/10.1116/1.579697.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
36

Xiao, Meng, Mengdie Zhang, Haoliang Liu, Boxue Du et Yawei Qin. « Dielectric Property and Breakdown Strength Performance of Long-Chain Branched Polypropylene for Metallized Film Capacitors ». Materials 15, no 9 (23 avril 2022) : 3071. http://dx.doi.org/10.3390/ma15093071.

Texte intégral
Résumé :
At high temperatures, the insulation performance of polypropylene (PP) decreases, making it challenging to meet the application requirements of metallized film capacitors. In this paper, the dielectric performance of PP is improved by long-chain branching modification and adding different kinds of nucleating agents. The added nucleating agents are organic phosphate nucleating agent (NA-21), sorbitol nucleating agent (DMDBS), rare earth nucleating agent (WBG-Ⅱ) and acylamino nucleating agent (TMB-5). The results show that the long-chain branches promote heterogeneous nucleation and inhibit the motion of molecular chains, thereby enhancing the dielectric properties at high temperatures. Nucleating agents modulate the crystalline morphology of long-chain branched polypropylene (LCBPP), which leads to a decrease in the mean free path of carriers and an increase in trap energy level and trap density. Therefore, the conductivity is reduced and the breakdown strength is improved. Among the added nucleating agents, NA-21 showed a significant improvement in the electrical properties of LCBPP films. At 125 °C, compared with PP, the breakdown strength of the modified film is increased by 26.3%, and the energy density is increased by 66.1%. This method provides a reference for improving the dielectric properties of PP.
Styles APA, Harvard, Vancouver, ISO, etc.
37

Wang Wenjuan, 王文娟, 李化 Li Hua, 李智威 Li Zhiwei, 童勇 Tong Yong et 林福昌 Lin Fuchang. « Lifetime improvement of metallized film capacitors by inner pressure strengthening ». High Power Laser and Particle Beams 26, no 4 (2014) : 45015. http://dx.doi.org/10.3788/hplpb20142604.45015.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
38

Belko, Victor O., Oleg A. Emelyanov, Ivan O. Ivanov, Andrey P. Plotnikov et Efrem G. Feklistov. « Application of Numerical Simulation for Metallized Film Capacitors Electrodes Design ». IEEE Access 9 (2021) : 80945–52. http://dx.doi.org/10.1109/access.2021.3085695.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
39

Belko, V. O., D. Y. Glivenko, O. A. Emelyanov et I. O. Ivanov. « INVESTIGATION OF DEGRADATION IN ELECTRODE CONTACTS OF METALLIZED FILM CAPACITORS ». St. Petersburg State Polytechnical University Journal 254, no 4 (février 2017) : 69–76. http://dx.doi.org/10.5862/jest.254.8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
40

Li, Hua, Wenjuan Wang, Zhiwei Li, Haoyuan Li, Bowen Wang, Fuchang Lin et Zhijian Xu. « Polarization characteristics of metallized polypropylene film capacitors at different temperatures ». IEEE Transactions on Dielectrics and Electrical Insulation 22, no 2 (avril 2015) : 682–88. http://dx.doi.org/10.1109/tdei.2015.7076763.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
41

Zhao, Jianyin, et Fang Liu. « Reliability assessment of the metallized film capacitors from degradation data ». Microelectronics Reliability 47, no 2-3 (février 2007) : 434–36. http://dx.doi.org/10.1016/j.microrel.2006.05.013.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
42

McCluskey, F. P., N. M. Li et E. Mengotti. « Eliminating infant mortality in metallized film capacitors by defect detection ». Microelectronics Reliability 54, no 9-10 (septembre 2014) : 1818–22. http://dx.doi.org/10.1016/j.microrel.2014.07.090.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
43

Makdessi, M., A. Sari et P. Venet. « Metallized polymer film capacitors ageing law based on capacitance degradation ». Microelectronics Reliability 54, no 9-10 (septembre 2014) : 1823–27. http://dx.doi.org/10.1016/j.microrel.2014.07.103.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
44

Valentine, Nathan, Michael H. Azarian et Michael Pecht. « Metallized film capacitors used for EMI filtering : A reliability review ». Microelectronics Reliability 92 (janvier 2019) : 123–35. http://dx.doi.org/10.1016/j.microrel.2018.11.003.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
45

El-Husseini, M. H., P. Venet, G. Rojat et C. Joubert. « Thermal simulation for geometric optimization of metallized polypropylene film capacitors ». IEEE Transactions on Industry Applications 38, no 3 (mai 2002) : 713–18. http://dx.doi.org/10.1109/tia.2002.1003421.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
46

Li, Zhiwei, Hua Li, Fuchang Lin, Yaohong Chen, De Liu, Bowen Wang, Qin Zhang et Wei He. « Lifetime Prediction of Metallized Film Capacitors Based on Capacitance Loss ». IEEE Transactions on Plasma Science 41, no 5 (mai 2013) : 1313–18. http://dx.doi.org/10.1109/tps.2013.2243476.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
47

Li, Zhiwei, Hua Li, Fuchang Lin, De Liu, Bowen Wang, Ling Dai, Haoyuan Li, Qin Zhang et Yaohong Chen. « Lifetime Improvement of Metallized Film Capacitors by Inner Pressure Strengthening ». IEEE Transactions on Plasma Science 41, no 10 (octobre 2013) : 3063–68. http://dx.doi.org/10.1109/tps.2013.2279140.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
48

Li, Zhiwei, Hua Li, Xiang Huang, Haoyuan Li, Wenjuan Wang, Bowen Wang, Fuchang Lin et Qin Zhang. « Temperature Rise of Metallized Film Capacitors in Repetitive Pulse Applications ». IEEE Transactions on Plasma Science 43, no 6 (juin 2015) : 2038–45. http://dx.doi.org/10.1109/tps.2015.2429144.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
49

Greenbank, William, et Thomas Ebel. « Layer-by-layer printable nano-scale polypropylene for precise control of nanocomposite capacitor dielectric morphologies in metallised film capacitors ». Power Electronic Devices and Components 4 (mars 2023) : 100025. http://dx.doi.org/10.1016/j.pedc.2022.100025.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
50

Li Hua, 李化, 李智威 Li Zhiwei, 王国帅 Wang Guoshuai, 林福昌 Lin Fuchang, 刘德 Liu De, 王博闻 Wang Bowen, 李浩原 Li Haoyuan et 张钦 Zhang Qin. « Lifetime prediction of metallized polypropylene film capacitors in pulsed power applications ». High Power Laser and Particle Beams 26, no 4 (2014) : 45016. http://dx.doi.org/10.3788/hplpb20142604.45016.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie