Littérature scientifique sur le sujet « Metal extrusion additive manufacturing »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Metal extrusion additive manufacturing ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Metal extrusion additive manufacturing"
Langelandsvik, Geir, Magnus Eriksson, Odd M. Akselsen et Hans J. Roven. « Wire arc additive manufacturing of AA5183 with TiC nanoparticles ». International Journal of Advanced Manufacturing Technology 119, no 1-2 (13 novembre 2021) : 1047–58. http://dx.doi.org/10.1007/s00170-021-08287-6.
Texte intégralCosta, José, Elsa Sequeiros, Maria Teresa Vieira et Manuel Vieira. « Additive Manufacturing ». U.Porto Journal of Engineering 7, no 3 (30 avril 2021) : 53–69. http://dx.doi.org/10.24840/2183-6493_007.003_0005.
Texte intégralFabrizio, Matteo, Matteo Strano, Daniele Farioli et Hermes Giberti. « Extrusion Additive Manufacturing of PEI Pellets ». Journal of Manufacturing and Materials Processing 6, no 6 (8 décembre 2022) : 157. http://dx.doi.org/10.3390/jmmp6060157.
Texte intégralTateno, Toshitake, Akira Kakuta, Hayate Ogo et Takaya Kimoto. « Ultrasonic Vibration-Assisted Extrusion of Metal Powder Suspension for Additive Manufacturing ». International Journal of Automation Technology 12, no 5 (5 septembre 2018) : 775–83. http://dx.doi.org/10.20965/ijat.2018.p0775.
Texte intégralJabbari, Amin, et Karen Abrinia. « A metal additive manufacturing method : semi-solid metal extrusion and deposition ». International Journal of Advanced Manufacturing Technology 94, no 9-12 (25 septembre 2017) : 3819–28. http://dx.doi.org/10.1007/s00170-017-1058-7.
Texte intégralLangelandsvik, Geir, Mathieu Grandcolas, Kristian G. Skorpen, Trond Furu, Odd M. Akselsen et Hans Jørgen Roven. « Development of Al-TiC Wire Feedstock for Additive Manufacturing by Metal Screw Extrusion ». Metals 10, no 11 (6 novembre 2020) : 1485. http://dx.doi.org/10.3390/met10111485.
Texte intégralKrinitcyn, Maksim, Alexandr Pervikov, Natalya Svarovskaya, Alexandr Lozhkomoev et Marat Lerner. « Extrusion-Based Additive Manufacturing of the Ti6Al4V Alloy Parts ». Coatings 13, no 6 (8 juin 2023) : 1067. http://dx.doi.org/10.3390/coatings13061067.
Texte intégralVan Sice, Corrie, et Jeremy Faludi. « COMPARING ENVIRONMENTAL IMPACTS OF METAL ADDITIVE MANUFACTURING TO CONVENTIONAL MANUFACTURING ». Proceedings of the Design Society 1 (27 juillet 2021) : 671–80. http://dx.doi.org/10.1017/pds.2021.67.
Texte intégralAnnoni, Massimiliano, Hermes Giberti et Matteo Strano. « Feasibility Study of an Extrusion-based Direct Metal Additive Manufacturing Technique ». Procedia Manufacturing 5 (2016) : 916–27. http://dx.doi.org/10.1016/j.promfg.2016.08.079.
Texte intégralJiang, Dayue, et Fuda Ning. « Bi-metal structures fabricated by extrusion-based sintering-assisted additive manufacturing ». Journal of Manufacturing Processes 98 (juillet 2023) : 216–22. http://dx.doi.org/10.1016/j.jmapro.2023.05.025.
Texte intégralThèses sur le sujet "Metal extrusion additive manufacturing"
PAKKANEN, JUKKA ANTERO. « Designing for Additive Manufacturing - Product and Process Driven Design for Metals and Polymers ». Doctoral thesis, Politecnico di Torino, 2018. http://hdl.handle.net/11583/2714732.
Texte intégralCumbunga, Judice. « Modeling and optimization of the thermomechanical behavior of metal partsobtained by sintering : Numerical and experimental approach ». Electronic Thesis or Diss., Bourgogne Franche-Comté, 2024. http://www.theses.fr/2024UBFCA006.
Texte intégralThe pressureless solid-state sintering process is a thermal treatment applied to improve or adjust material properties according to its field of application, given its ability to handle parts with complex geometries, high dimensional accuracy, small dimensions and suitability for soft and hard materials. However, modeling this type of process proves to be a difficult task, as an appropriate model needs to take into account various aspects, namely the multi-scale and multi-physics character of the problem, the high non-linearity of the material, the complexity of the geometries and, last but not least, the type of boundary conditions. From an industrial point of view, the appropriate heat treatment parameters are mainly obtained by trial and error. Numerical simulation makes it possible to reduce the cost of these tests and to provide more useful predictions or recommendations for actual production, than sintering tests themselves. Numerous research projects have been devoted to the development of mathematical and numerical models with approaches adapted to different levels or scales, such as the small scale (atomic level), the meso-scale (particle, grain and pore level), and the continuum scale (component level). The ability to predict the evolution of microstructure has put the mesoscopic model (at particle, grain and pore level) ahead of the others.In research terms, the question posed would therefore be "Given a untreated part obtained by MExAM, how can we numerically simulate the evolution of the microstructure (from an initial microstructural state) to control changes in thermomechanical properties during the solid-state sintering process ?"A robust computational model, based on a multiphysics and multi-scale approach, has been developed, tested and validated. It enables us to predict the evolution of the material's microstructure, thermal and mechanical properties. The model is based on the finite element method, and progressively takes into account the multiphysical couplings (thermal, mechanical and microstructure) that influence the material's behavior. Special considerations have been given to the integration of non-linear phenomena. The results of the various simulations have shown that the model developed is capable of predicting the behavior of the sintering process with correct accuracy. The special case of material behavior for MExAM was presented, as well as how to use the model to optimize its thermomechanical properties. Optimization was achieved by coupling the results of the various simulations with the Taguchi method. It should be noted that the results obtained from the analysis of material properties confirm the successful application of the model, both in predicting the microstructural and thermomechanical behavior of the material, and in optimizing its properties
Go, Jamison. « High-throughput extrusion-based additive manufacturing ». Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/101812.
Texte intégralCataloged from PDF version of thesis.
Includes bibliographical references (pages 171-179).
Additive manufacturing (AM), the process of building objects layer by layer from a three dimensional digital model, is gaining significance due to its ability to create unique geometries and/or novel material compositions while spanning a wide range of length scales. However, the viability of using AM for the production of end-use parts hinges on improvements to production speed without making sacrifices to quality. This thesis seeks to understand the rate-limits to extrusion-based AM, commonly referred to as fused deposition modeling (FDM), and to demonstrate this understanding via the design and fabrication of a high-throughput extrusion AM platform. Three subsystems - the pinch wheel extruder, the conduction liquefier, and the open loop series gantry - were identified as rate limiting to conventional FDM systems via module level experimentation and analysis. These limitations motivated the development of three alternate mechanisms -a screw-feed extruder, a laser-heated extruder, and H-frame gantry - which are designed to overcome the limitations of conventional techniques. These mechanisms are combined into a high-throughput desktop-scale prototype, called FastFDM. Using the FastFDM system, test parts are fabricated at twice the material deposition rate of state-of-the-art machines while maintaining comparable accuracy and resolution. The FastFDM approach has promising future applications to the extrusion AM of nanocomposite polymer resins, high-throughput AM of high performance thermoplastics, and adaptation to large-scale extrusion AM systems.
by Jamison Go.
S.M.
Braconnier, Daniel J. « Materials Informatics Approach to Material Extrusion Additive Manufacturing ». Digital WPI, 2018. https://digitalcommons.wpi.edu/etd-theses/204.
Texte intégralPEDEMONTE, LAURA CHIARA. « Laser in Metal Additive Manufacturing ». Doctoral thesis, Università degli studi di Genova, 2019. http://hdl.handle.net/11567/973605.
Texte intégralMalinowski, Maxwell. « High-throughput extrusion additive manufacturing using electrically resistive preheating ». Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/105693.
Texte intégralCataloged from PDF version of thesis.
Includes bibliographical references (page 33).
Extrusion-based additive manufacturing, commonly known as fused deposition modeling (FDM) or fused filament fabrication (FFF) is incredibly useful in industry for a variety of reasons, including rapid prototyping and the ability to create complex geometries easily. However, its further adoption is limited by relatively slow part manufacturing rates when compared to conventional manufacturing methods. Previous work has identified three modules within the FDM process which are rate limiting: speed of gantry positioning, polymer heating, and extrusion pressure. Advancements in any one module will allow for higher volumetric output, which will in turn allow for higher rates of production using FDM. This work focuses on polymer heating, and demonstrates a new concept for rapid heating of filament by introducing conductive nanoparticles into the polymer resin and resistively heating sections in flow. This technique can improve the volumetric output of FDM printers by at least 20%. First, the resistive properties of the composite filament are characterized. Second, the concept is experimentally validated by demonstrating a decrease in extrusion force required to maintain a given feed rate when using resistive heating.
by Maxwell Malinowski.
S.B.
Byron, Andrew James. « Qualification and characterization of metal additive manufacturing ». Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/104315.
Texte intégralThesis: S.M. in Engineering Systems, Massachusetts Institute of Technology, Department of Aeronautics and Astronautics, 2016. In conjunction with the Leaders for Global Operations Program at MIT.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 119-123).
Additive manufacturing (AM) has emerged as an effective and efficient way to digitally manufacture complicated structures. Raytheon Missile Systems seeks to gain limited production capability with metals AM, which can only be achieved with qualified, predictable processes that reduce variation. The project documented in this thesis produced two results needed to qualify AM for use on flight-critical parts: i) creation of a standard qualification process building upon Raytheon's product development knowledge, and ii) selection and identification of key metals AM process factors and their corresponding experimental responses. The project has delivered a qualification test plan and process that will be used next year to drive adoption and integration of Raytheon's metals AM technology. The first phase of the designed experiment on AM process factors was completed by experimenting with coupon orientation, position on the build platform, coupon shape and hot isostatic pressing (HIP) post-treatment for an Al alloy (AlSi10Mg) produced via laser powder bed fusion using 400-watt laser equipment. Only coupon orientation had a statistically significant effect on dimensional accuracy, increasing the variance of y-axis (within the build plane) error by ~50%, although this is considered a small increase. HIP decreased yield and ultimate stresses by ~60% while increasing ultimate strain by ~250%. Vertical orientation of coupons decreased yield and ultimate stresses by ~25% and increased ultimate strain by ~30%. Small coupon area on the build platform, associated with thin rectangle coupons, decreased yield stress and ultimate strain by ~5%. The processes and case study from this thesis represent a general advance in the adoption of metals AM in aerospace manufacturing.
by Andrew James Byron.
M.B.A.
S.M. in Engineering Systems
MURUGAN, VARUN. « Optimized Material Deposition for Extrusion-Based Additive Manufacturing of Structural Components ». Doctoral thesis, Università degli studi di Pavia, 2022. http://hdl.handle.net/11571/1464786.
Texte intégralMcCarthy, David Lee. « Creating Complex Hollow Metal Geometries Using Additive Manufacturing and Metal Plating ». Thesis, Virginia Tech, 2012. http://hdl.handle.net/10919/43530.
Texte intégralMaster of Science
Cunningham, Ross W. « Defect Formation Mechanisms in Powder-Bed Metal Additive Manufacturing ». Research Showcase @ CMU, 2018. http://repository.cmu.edu/dissertations/1160.
Texte intégralLivres sur le sujet "Metal extrusion additive manufacturing"
Leach, Richard, et Simone Carmignato. Precision Metal Additive Manufacturing. Sous la direction de Richard Leach et Simone Carmignato. First edition. | Boca Raton, FL : CRC Press, 2020. : CRC Press, 2020. http://dx.doi.org/10.1201/9780429436543.
Texte intégralShrivastava, Parnika, Anil Dhanola et Kishor Kumar Gajrani. Hybrid Metal Additive Manufacturing. Boca Raton : CRC Press, 2023. http://dx.doi.org/10.1201/9781003406488.
Texte intégralWaters, Cynthia K. Materials Technology Gaps in Metal Additive Manufacturing. Warrendale, PA : SAE International, 2018. http://dx.doi.org/10.4271/pt-189.
Texte intégralBian, Linkan, Nima Shamsaei et John M. Usher, dir. Laser-Based Additive Manufacturing of Metal Parts. Boca Raton : CRC Press, Taylor & Francis, 2018. : CRC Press, 2017. http://dx.doi.org/10.1201/9781315151441.
Texte intégralRamesh Babu, N., Santosh Kumar, P. R. Thyla et K. Sripriyan, dir. Advances in Additive Manufacturing and Metal Joining. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7612-4.
Texte intégralBorg Costanzi, Christopher. Reinforcing and Detailing of Thin Sheet Metal Using Wire Arc Additive Manufacturing as an Application in Facades. Wiesbaden : Springer Fachmedien Wiesbaden, 2023. http://dx.doi.org/10.1007/978-3-658-41540-2.
Texte intégralAdaskin, Anatoliy, Aleksandr Krasnovskiy et Tat'yana Tarasova. Materials science and technology of metallic, non-metallic and composite materials:the technology of manufacturing blanks and parts. Book 2. ru : INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1143897.
Texte intégralNarayan, Roger J., dir. Additive Manufacturing in Biomedical Applications. ASM International, 2022. http://dx.doi.org/10.31399/asm.hb.v23a.9781627083928.
Texte intégralToyserkani, Ehsan, Dipak Kumar Sarkar, Paola Russo, Osezua Obehi Ibhadod et Farzad Liravi. Metal Additive Manufacturing. Wiley & Sons, Limited, John, 2021.
Trouver le texte intégralLancaster, Robert J., Alessandro Fortunato et Stanislav Kolisnychenko. Metal Additive Manufacturing. Trans Tech Publications Ltd, 2020. http://dx.doi.org/10.4028/www.scientific.net/978-3-0357-3752-3.
Texte intégralChapitres de livres sur le sujet "Metal extrusion additive manufacturing"
Joshi, Sanjay, Richard P. Martukanitz, Abdalla R. Nassar et Pan Michaleris. « Metal Additive Manufacturing Processes – Jetting- and Extrusion-Based Processes ». Dans Additive Manufacturing with Metals, 151–93. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-37069-4_5.
Texte intégralBor, T. C., D. H. Strik, S. Sayyad Rezaeinejad, N. G. J. Helthuis, G. S. Vos, M. Luckabauer et R. Akkerman. « A Feasibility Study on Friction Screw Extrusion Additive Manufacturing of AA6060 ». Dans The Minerals, Metals & ; Materials Series, 27–38. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-22661-8_3.
Texte intégralGuerra, Maria Grazia, Luigi Morfini, Alessandro Pellegrini, Fankai Meng, Fulvio Lavecchia, Eleonora Ferraris et Luigi Maria Galantucci. « Material Extrusion-Debinding-Sintering as an Emerging Additive Manufacturing Process Chain for Metal/Ceramic Parts Construction ». Dans Lecture Notes in Mechanical Engineering, 147–82. Cham : Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-54034-9_5.
Texte intégralWetzig, Tony, Matthias Schwarz, Leandro Schöttler, Patrick Gehre et Christos G. Aneziris. « Functionalized Feeders, Hollowware, Spider Bricks and Starter Casting Tubes for Increasing the Purity in Steel Casting Processes ». Dans Multifunctional Ceramic Filter Systems for Metal Melt Filtration, 815–31. Cham : Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-40930-1_32.
Texte intégralGibson, Ian, David Rosen, Brent Stucker et Mahyar Khorasani. « Material Extrusion ». Dans Additive Manufacturing Technologies, 171–201. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-56127-7_6.
Texte intégralGibson, Ian, David W. Rosen et Brent Stucker. « Extrusion-Based Systems ». Dans Additive Manufacturing Technologies, 160–86. Boston, MA : Springer US, 2010. http://dx.doi.org/10.1007/978-1-4419-1120-9_6.
Texte intégralGibson, Ian, David Rosen et Brent Stucker. « Extrusion-Based Systems ». Dans Additive Manufacturing Technologies, 147–73. New York, NY : Springer New York, 2015. http://dx.doi.org/10.1007/978-1-4939-2113-3_6.
Texte intégralSrivastava, Manu, Sandeep Rathee, Sachin Maheshwari et T. K. Kundra. « Additive Manufacturing Processes Utilizing an Extrusion-Based System ». Dans Additive Manufacturing, 99–116. Boca Raton, FL : CRC Press/Taylor & ; Francis Group, 2019. : CRC Press, 2019. http://dx.doi.org/10.1201/9781351049382-8.
Texte intégralHaghighi, Azadeh. « Material Extrusion ». Dans Springer Handbook of Additive Manufacturing, 335–47. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20752-5_21.
Texte intégralZhao, Hao, et Garrison Zong. « Metal Additive Manufacturing ». Dans Materials in Advanced Manufacturing, 269–300. Boca Raton : CRC Press, 2022. http://dx.doi.org/10.1201/9781003182146-6.
Texte intégralActes de conférences sur le sujet "Metal extrusion additive manufacturing"
Marconcini, Francesco, Francesco Tamburrino, Guido Giammarinaro, Fabrizio Paganucci et Armando Viviano Razionale. « Investigation of the Material Extrusion Additive Manufacturing of an Inconel-718 Filament ». Dans Euro Powder Metallurgy 2023 Congress & Exhibition. EPMA, 2023. http://dx.doi.org/10.59499/ep235765215.
Texte intégralWassano Buchwitz, Victor, Bernardo Fabricio Martins Gonçalves, Luciano Zart Olanyk, Lucas Freitas Berti et Neri Volpato. « Comparing Metal Filaments and Pellets for Material Extrusion in Additive Manufacturing : A Review. » Dans 27th Brazilian Congress of Thermal Sciences and Engineering. ABCM, 2023. http://dx.doi.org/10.26678/abcm.cobem2023.cob2023-1182.
Texte intégralDi Nisio, Felipe, et Neri Volpato. « Void Reduction Strategies in Material Extrusion Additive Manufacturing of Metal Parts : A Review ». Dans 27th Brazilian Congress of Thermal Sciences and Engineering. ABCM, 2023. http://dx.doi.org/10.26678/abcm.cobem2023.cob2023-0620.
Texte intégralMansfield, Brooke, Sabrina Torres, Tianyu Yu et Dazhong Wu. « A Review on Additive Manufacturing of Ceramics ». Dans ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2886.
Texte intégralZhang, Bin, Bob Tarantino et Samuel C. Lieber. « Effect of Metal Additive Manufacturing on the Engineering Design of Manufacturing Tooling : A Case Study on Dies for Plastic Extruded Products ». Dans ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71534.
Texte intégralNEZIC, N. « Development of a new method utilizing semi-solid aluminum wires for extrusion based additive manufacturing ». Dans Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-9.
Texte intégralPellegrini, A. « Effect of layer and raster orientation on bending properties of 17-4 PH printed via material extrusion additive manufacturing technology ». Dans Italian Manufacturing Association Conference. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902714-17.
Texte intégralKim, Christopher D., Levi D. DeVries et Michael D. M. Kutzer. « A Slicing Method for Spherical Additive Manufacturing ». Dans ASME 2023 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/imece2023-113853.
Texte intégralTiwari, Mithilesh Kumar, Ankit Kumar Gupta, Harshal Y. Shahare, K. Ponappa et Puneet Tandon. « Investigating the Material Flow and Thermal Distribution in a Hybrid Additive Manufacturing Incremental Forming (HAMIF) Technology ». Dans ASME 2023 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/imece2023-116436.
Texte intégralKim, Christopher D., Levi D. DeVries et Michael D. M. Kutzer. « Design of a Robotic Testbed for Spherical Additive Manufacturing ». Dans ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/detc2023-114908.
Texte intégralRapports d'organisations sur le sujet "Metal extrusion additive manufacturing"
Slattery, Kevin, et Kirk A. Rogers. Internal Boundaries of Metal Additive Manufacturing : Future Process Selection. SAE International, mars 2022. http://dx.doi.org/10.4271/epr2022006.
Texte intégralDehoff, Ryan R., et Michael M. Kirka. Additive Manufacturing of Porous Metal. Office of Scientific and Technical Information (OSTI), juin 2017. http://dx.doi.org/10.2172/1362246.
Texte intégralCarter, William G., Orlando Rios, Ronald R. Akers et William A. Morrison. Low-cost Electromagnetic Heating Technology for Polymer Extrusion-based Additive Manufacturing. Office of Scientific and Technical Information (OSTI), janvier 2016. http://dx.doi.org/10.2172/1238025.
Texte intégralAllen, Jeffrey, et Guillermo Riveros. Mesoscale multiphysics simulations of the fused deposition additive manufacturing process. Engineer Research and Development Center (U.S.), mai 2024. http://dx.doi.org/10.21079/11681/48595.
Texte intégralKim, Felix H., et Shawn P. Moylan. Literature review of metal additive manufacturing defects. Gaithersburg, MD : National Institute of Standards and Technology, mai 2018. http://dx.doi.org/10.6028/nist.ams.100-16.
Texte intégralLove, Lonnie J., Andrzej Nycz et Mark W. Noakes. Large Scale Metal Additive Manufacturing with Wolf Robotics. Office of Scientific and Technical Information (OSTI), juillet 2018. http://dx.doi.org/10.2172/1465067.
Texte intégralNycz, Andrzej, Mark Noakes, Luke Meyer, Chris Masuo, Derek Vaughan, Lonnie Love et Mike Walker. Large Scale Metal Additive Manufacturing for Stamping Dies. Office of Scientific and Technical Information (OSTI), août 2022. http://dx.doi.org/10.2172/1883756.
Texte intégralKnapp, Cameron M. Los Alamos National Laboratory’s Approach to Metal Additive Manufacturing. Office of Scientific and Technical Information (OSTI), mars 2016. http://dx.doi.org/10.2172/1242923.
Texte intégralLee, Yousub, Srdjan Simunovic et A. Kate Gurnon. Quantification of Powder Spreading Process for Metal Additive Manufacturing. Office of Scientific and Technical Information (OSTI), octobre 2019. http://dx.doi.org/10.2172/1615799.
Texte intégralSlotwinski, John, April Cooke et Shawn Moylan. Mechanical properties testing for metal parts made via additive manufacturing :. Gaithersburg, MD : National Institute of Standards and Technology, 2012. http://dx.doi.org/10.6028/nist.ir.7847.
Texte intégral