Bibliographies thématiques / Mefo

Littérature scientifique sur le sujet « Mefo »

Auteur : Grafiati
Publié le 25 juillet 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Mefo ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Mefo"

1

Schoellhorn, Richard K., James E. Barrett, Carolyn A. Bartuska et Terril Nell. « Elevated Temperature Affects Axillary Meristem Development in Dendranthema ×grandiflorum 'Improved Mefo' ». HortScience 36, no 6 (octobre 2001) : 1049–52. http://dx.doi.org/10.21273/hortsci.36.6.1049.

Texte intégral
Résumé :
Effects of heat stress on viable and nonviable axillary meristem development and subsequent lateral branching in 'Improved Mefo' chrysanthemum [Dendranthema ×grandiflorum Ramat. (Kitamura)] were studied. Plants grown at 33 °C day/27 °C night produced more nonviable buds than did plants grown at 23 °C day/18 °C night. A negative linear relationship {y = 28.7 + [-0.66 (x days)], r2 = 0.70} between timing of exposure to high temperatures and the number of nonviable buds was observed. Histological examination 28 days after exposure to 33 °C/27 °C revealed that plants showed both normal and abnormal bud development. Abnormal bud development occurred as a consequence of premature differentiation of axillary meristematic tissue into nonmeristematic parenchyma tissue immediately after separation of axillary from apical meristems.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Delgado Derio, C., S. Guerrero Bonnet, M. Troncoso Ponce, A. Araneda Yañez, A. Slachevsky Chonchol et M. I. Behrens Pellegrino. « Memory, fluency, and orientation (MEFO) : A five-minute screening test for cognitive decline ». Neurología (English Edition) 28, no 7 (septembre 2013) : 400–407. http://dx.doi.org/10.1016/j.nrleng.2012.10.001.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ortega, J., A. Turnipseed, A. B. Guenther, T. G. Karl, D. A. Day, D. Gochis, J. A. Huffman et al. « Overview of the Manitou Experimental Forest Observatory : site description and selected science results from 2008–2013 ». Atmospheric Chemistry and Physics Discussions 14, no 2 (20 janvier 2014) : 1647–709. http://dx.doi.org/10.5194/acpd-14-1647-2014.

Texte intégral
Résumé :
Abstract. The Bio-hydro-atmosphere interactions of Energy, Aerosols, Carbon, H2O, Organics & Nitrogen (BEACHON) project seeks to understand the feedbacks and inter-relationships between hydrology, biogenic emissions, carbon assimilation, aerosol properties, clouds and associated feedbacks within water-limited ecosystems. The Manitou Experimental Forest Observatory (MEFO) was established in 2008 by the National Center for Atmospheric Research to address many of the BEACHON research objectives, and it now provides a fixed field site with significant infrastructure. MEFO is a mountainous, semi-arid ponderosa pine-dominated forest site that is normally dominated by clean continental air, but is periodically influenced by anthropogenic sources from Colorado Front Range cities. This article summarizes the past and ongoing research activities at the site, and highlights some of the significant findings that have resulted from these measurements. These activities include: – soil property measurements, – hydrological studies, – measurements of high-frequency turbulence parameters, – eddy covariance flux measurements of water, energy, aerosols and carbon dioxide through the canopy, – biogenic and anthropogenic volatile organic compound emissions and their influence on regional atmospheric chemistry, – aerosol number and mass distributions, – chemical speciation of aerosol particles, – characterization of ice and cloud condensation nuclei, – trace gas measurements, and – model simulations using coupled chemistry and meteorology. In addition to various long-term continuous measurement, three focused measurement campaigns with state-of-the-art instrumentation have taken place since the site was established, and two of these are the subjects of this special issue: BEACHON-ROCS (Rocky Mountain Organic Carbon Study, 2010) and BEACHON-RoMBAS (Rocky Mountain Biogenic Aerosol Study, 2011).
Styles APA, Harvard, Vancouver, ISO, etc.
4

Ortega, J., A. Turnipseed, A. B. Guenther, T. G. Karl, D. A. Day, D. Gochis, J. A. Huffman et al. « Overview of the Manitou Experimental Forest Observatory : site description and selected science results from 2008 to 2013 ». Atmospheric Chemistry and Physics 14, no 12 (26 juin 2014) : 6345–67. http://dx.doi.org/10.5194/acp-14-6345-2014.

Texte intégral
Résumé :
Abstract. The Bio-hydro-atmosphere interactions of Energy, Aerosols, Carbon, H2O, Organics & Nitrogen (BEACHON) project seeks to understand the feedbacks and inter-relationships between hydrology, biogenic emissions, carbon assimilation, aerosol properties, clouds and associated feedbacks within water-limited ecosystems. The Manitou Experimental Forest Observatory (MEFO) was established in 2008 by the National Center for Atmospheric Research to address many of the BEACHON research objectives, and it now provides a fixed field site with significant infrastructure. MEFO is a mountainous, semi-arid ponderosa pine-dominated forest site that is normally dominated by clean continental air but is periodically influenced by anthropogenic sources from Colorado Front Range cities. This article summarizes the past and ongoing research activities at the site, and highlights some of the significant findings that have resulted from these measurements. These activities include - soil property measurements; - hydrological studies; - measurements of high-frequency turbulence parameters; - eddy covariance flux measurements of water, energy, aerosols and carbon dioxide through the canopy; - determination of biogenic and anthropogenic volatile organic compound emissions and their influence on regional atmospheric chemistry; - aerosol number and mass distributions; - chemical speciation of aerosol particles; - characterization of ice and cloud condensation nuclei; - trace gas measurements; and - model simulations using coupled chemistry and meteorology. In addition to various long-term continuous measurements, three focused measurement campaigns with state-of-the-art instrumentation have taken place since the site was established, and two of these studies are the subjects of this special issue: BEACHON-ROCS (Rocky Mountain Organic Carbon Study, 2010) and BEACHON-RoMBAS (Rocky Mountain Biogenic Aerosol Study, 2011).
Styles APA, Harvard, Vancouver, ISO, etc.
5

Schoellhorn, Richard Kent, James E. Barrett et Terril A. Nell. « VARIATIONS IN BRANCHING OF CHRYSANTHEMUM CULTIVARS AS INFLUENCED BY SEASON, TEMPERATURE, AND IRRADIANCE. » HortScience 28, no 5 (mai 1993) : 520f—520. http://dx.doi.org/10.21273/hortsci.28.5.520f.

Texte intégral
Résumé :
Effects of irradiance and temperature on bud break and elongation in chrysanthemum (Dendranthema grandiflora × Ramat.) were studied. Expt. 1 - 2 growth chambers were maintained at air temperatures of 25C and 30C and within each chamber root-zone temperatures were maintained in relationship to air temperature (+ 5C, 0C, -5C). At 15C/20C and 30C/25C root-zone/air temperatures, lateral number was reduced up to 50%. Variation in response was seen between cultivars `Tara' and `Limelight'. Expt. 2 - A study of the interaction of temperature, irradiance and cultivar on lateral number showed increasing irradiance fro m 400 to 1400μmol m-2s-1 increased lateral numbers by up to 40% depending on cultivar. Cultivars `Limelight', `Tara' and `Improved Mefo' were used. Temperature had no effect on lateral number.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Gregory, Richard L. « A Memo on Meno ». Perception 29, no 6 (juin 2000) : 631–33. http://dx.doi.org/10.1068/p2906ed.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Couto, Joaquim Miguel, et Gilberto Hackl. « Hjalmar Schacht e a economia alemã (1920-1950) ». Economia e Sociedade 16, no 3 (décembre 2007) : 311–41. http://dx.doi.org/10.1590/s0104-06182007000300002.

Texte intégral
Résumé :
O objetivo deste artigo é expor as idéias econômicas de Hjalmar Schacht (1877-1970) e explicar suas medidas práticas para a resolução dos principais problemas enfrentados pela Alemanha na primeira metade do século XX. Schacht teve papel-chave no término da hiperinflação alemã na década de 1920, nas negociações das reparações de guerra (planos Dawes e Young), na superação da grande depressão dos anos 1930 (acabando com o desemprego e tornando a Alemanha, novamente, uma potência econômica) e, por fim, formulou um novo plano para superar a crise econômica vivida pelo seu país após o término da Segunda Guerra. Utilizou duas ilusões monetárias: a do Rentenmark, que ajudou a terminar com a inflação; e a do Saques Mefo, que financiou as obras públicas que extinguiriam o desemprego. Por seu sucesso na resolução de problemas econômicos, foi considerado um "bruxo" por muitos. Na verdade, Hjalmar Schacht conhecia apenas o funcionamento do sistema capitalista; as relações existentes entre as variáveis econômicas.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Banken, Ralf. « Der Ursprung der geräuschlosen Kriegsfinanzierung im „Dritten Reich“ 1935–1939 ». Jahrbuch für Wirtschaftsgeschichte / Economic History Yearbook 61, no 2 (25 novembre 2020) : 459–85. http://dx.doi.org/10.1515/jbwg-2020-0019.

Texte intégral
Résumé :
AbstractIn addition to the well-known mefo bills and other types of state debts, National Socialist tax policy was also of great importance for the financing of armament before the war began. Nevertheless, the leaders of the Nazi regime could not agree on the general course of tax policy due to the already high tax burden since spring 1935. As the Reich Ministry of Finance was only able to push through a few small tax increases despite a stricter tax collection practice, the tax coverage of Reich expenditures sank further and further and the short-term national debt increased. This development led to a severe liquidity crisis of the Reich’s finances in 1938 due to the ever accelerating armament, which was overcome for the time being mainly by issuing short-term treasury bonds. This ad hoc solution became entrenched during the war due to those groups in the Nazi regime that continued to block tax policy and formed the basis for the silent financing of the war.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Schoellhorn, Richard K., James E. Barrett et Terril A. Nell. « Changes in Chrysanthemum Meristem and Lateral Bud Development at Elevated Temperatures ». HortScience 30, no 4 (juillet 1995) : 760C—760. http://dx.doi.org/10.21273/hortsci.30.4.760c.

Texte intégral
Résumé :
`Improved Mefo' chrysanthemums were grown at 22C/18C and 34C/28C day/night temperature regimes to evaluate the failure of lateral bud development following pinching of this temperature sensitive cultivar. The number of viable buds on plants at the high temperatures was 40% of number at low temperature. Loss of bud viability was categorized as those buds that were: 1) absent, or 2) those in which growth was present, but inhibited. Inhibited buds were visible swellings surrounded by dense masses of secondary cell wall material. Anatomical studies were completed to verify the absence of lateral buds and determine what cellular changes imposed inhibition on those buds that did develop. A second group of experiments demonstrated that moving low-temperature plants to the high temperature caused production of viable buds to decline. Plants were moved from high temperatures to low, and reciprocally to high from low temperature. Anatomical sampling of apical meristems began at time of shift and at 1, 2, 4, and 8 days after temperature shift. High-temperature meristems possessed predominantly non-viable lateral buds, with few viable buds present.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Huang, Li-Chun, Ellen T. Paparozzi et Carol Gotway. « The Effect of Altering Nitrogen and Sulfur Supply on the Growth of Cut Chrysanthemums ». Journal of the American Society for Horticultural Science 122, no 4 (juillet 1997) : 559–64. http://dx.doi.org/10.21273/jashs.122.4.559.

Texte intégral
Résumé :
`Dark Yellow Fuji Mefo' chrysanthemums (Dendranthema grandiflora Tzvelev.) were grown hydroponically with either 64, 127, or 254 mg·L-1 N and either 0, 1, 2, 4, 8, 16, 32, or 64 mg·L-1 S in a randomized complete block. Time to flower was measured and symptoms of S deficiency were observed on root, stem, and leaf systems. New leaves and inflorescences were analyzed for S, and lower leaves were analyzed for N concentration. There were four sampling dates and two experiments. Flower diameter was measured when flowers were present, while stem length was measured every sampling date. Nitrogen application could be reduced by half to 127 mg·L-1 as long as some S, 4 mg·L-1 in the fall and 8 mg·L-1 in the spring, was applied. Sulfur deficiency symptoms observed included branchless roots, which aged earlier, overall yellowing of new leaves, and reddening on the leaf abaxial starting from older leaves and moving acropetally. Plants receiving no S had smaller leaves, shorter stems, delayed inflorescence initiation, and restricted inflorescence development. Without S, plants did not produce flowers suitable for commercial sale.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Mefo"

1

Mefo, Kue Floriane [Verfasser], Stephan [Akademischer Betreuer] Dempe, Stephan [Gutachter] Dempe et Andreas [Gutachter] Fischer. « Mixed integer bilevel programming problems / Floriane Mefo Kue ; Gutachter : Stephan Dempe, Andreas Fischer ; Betreuer : Stephan Dempe ». Freiberg : Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2017. http://d-nb.info/1221069543/34.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Santos, Maria de Jesus Chumbo dos. « O medo da grávida durante o trabalho de parto, no meio hospitalar ». Master's thesis, Universidade de Évora, 2003. http://hdl.handle.net/10174/15036.

Texte intégral
Résumé :
Este trabalho de pesquisa, teve como objetivo avaliar "0 medo da grávida durante o trabalho de parto no meio hospitalar". Trata-se de um estudo exploratório, descritivo, de natureza quantitativa. A amostra populacional para este estudo selecionada aleatoriamente, é constituída por 158 (cento e cinquenta e oito) puérperas internadas no hospital do Espirito Santo em Évora. Propusemo-nos atingir os seguintes objetivos: •identificar os principais medos experimentados pelas gravidas; •identificar alguns dos fatores que interferem na ocorrência de medo na gravida em trabalho de parto; •Saber a intensidade do medo da gravida em trabalho de parto. Após o enquadramento teórico, onde abordamos ternas como a revisão da assistência obstétrica, gravidez, trabalho de parto e parto e conceito de medo, selecionámos as variáveis e os indicadores que permitiram a elaboração do instrumente de colheita de dados. Este foi aplicado no período de 1 de Fevereiro a 15 de Março de 2003, recolhidos através de um questionário para identificação da vivência dos medos experimentados durante o trabalho de parto. A análise dos dados recolhidos, através de um questionário, permitiram-nos concluir que: •A intensidade do medo varia, mas existe em grande parte das puérperas inquiridas. •Os medos mais referidos foram o medo do bebé ser deficiente e o medo da dor. durante o trabalho de parto. •Os fatores que influenciam os medo sentidos são as habilitações literárias e, consequentemente, a profissão. 0 fato de a grávida possuir mais informação acerca das diversas fases do trabalho de parto e parto parece assim dar - lhe uma perspetiva mais real do acontecimento. •A presença do companheiro/marido revelou ser uma influência positiva contribuindo para o bem-estar da grávida funcionando como suporte afetivo para a mulher ajudando a lidar como medo./*** Abstract - "The evaluation of pregnant fear during childbirth in an hospital environment" was the objective of this research work. This is an exploratory, descriptive study with a quantitative nature. The population sample of this study was selected randomly and it is constituted by 158 (one hundred and fifty eight) pregnant women interned in Hospital Espírito Santo, in Évora. We intended to achieve the objectives below: •To identify the main fears experimented by pregnant women; •To identify some of the elements that interfere in the pregnant fear during childbirth; •To know the intensity of the pregnant fear during childbirth; After the theoretical framing where we referred subjects such as the revision of the obstetrics assistance, pregnancy, childbirth and birth, and the fear concept, we selected the indicators and variables which allowed the development of a data supply instrument. The data gathering took place between the February's 1stand March's 15th of 2003, by questionnaire with the objective to identifying the fears experimented during childbirth. The data analysis allowed us to reach the conclusions below: •Fear intensity changes, which was common to the most of the inquired pregnant; •The imperfection of the baby and the pain during childbirth were the most referred fears; •The women's degree and job are the key elements that have influence in the way that fears are lived. A good information about the stages of childbirth seems to give to the pregnant women a closer perspective to the reality of the event; •The presence of the father turned out to be a positive influence for the pregnant well being, helping her to overcome the fear.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Mero-Matikainen, Niina. « Postprandial metabolism of HLD and apolipoproteins B-48 and B-100 ». Helsinki : University of Helsinki, 1999. http://ethesis.helsinki.fi/julkaisut/laa/kliin/vk/mero-matikainen/.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Gomes, Érica Alves [UNESP]. « Estudo do desajuste angular e vertical em próteses fixas implantossuportadas por meio do MEF-3D ». Universidade Estadual Paulista (UNESP), 2009. http://hdl.handle.net/11449/105579.

Texte intégral
Résumé :
Made available in DSpace on 2014-06-11T19:35:03Z (GMT). No. of bitstreams: 0 Previous issue date: 2009-09-17Bitstream added on 2014-06-13T19:44:52Z : No. of bitstreams: 1 gomes_ea_dr_araca.pdf: 12533208 bytes, checksum: 62db616b630b0f9a9807e6b24297d9e8 (MD5)
Objetivo: A análise pelo método dos elementos finitos tridimensional foi utilizada para avaliar o efeito dos desajustes angular e vertical simulado em próteses fixas implantossuportadas parafusadas de 3 elementos, na resposta biomecânica do tecido ósseo peri-implantar, implantes e componentes protéticos. Material e método: Foram confeccionados 4 modelos tridimensionais, representativos de secção mandibular direita contendo um implante na região de segundo pré-molar (2oPM) e outro na região de segundo molar (2oM) ferulizados por uma prótese metalocerâmica implantossuportada parafusada de 3 elementos, diferenciados pelo tipo de desajuste protético, gerando os grupos: GC (grupo controle) - prótese totalmente adaptada aos implantes, DAU (desajuste angular unilateral) - prótese com desajuste angular unilateral de 100μm na região mesial do 2oM, DVU (desajuste vertical unilateral) - prótese com desajuste vertical unilateral de 100μm na região mesial do 2oM e DVT (desajuste vertical total) - prótese com desajuste vertical de 100μm em toda a plataforma de assentamento da infraestrutura no 2oM. Com a utilização do programa de elementos finitos Ansys® uma força vertical total de 400N foi distribuída em 12 pontos de parada cêntrica, sendo que cada molar recebeu um carregamento total de 150N e o 2oPM de 100N, gerando mapas de tensões. Resultados: Verificou-se que a distribuição e os valores de tensões para o tecido ósseo peri-implantar foram similares para todos os grupos. Os grupos com desajustes alteraram o padrão de distribuição e elevaram a magnitude das tensões em relação ao grupo GC. No grupo DAU os maiores valores de tensões foram observados no corpo do implante e parafuso de retenção. Já nos grupos DVU e DVT elevados valores de tensões foram encontrados na plataforma de assentamento da infraestrutura...
Purpose: The three-dimensional finite element analysis was used to evaluate the effect of vertical and angular misfit in 3-piece implant-supported and screw-retained fixed prostheses on biomechanical response in peri-implant bone tissue, implants and prosthetic components. Material and method: Four three-dimensional models were fabricated to represent a right posterior mandibular section with one implant in the region of second premolar (2°PM) and other in the region of second molar (2°M). The implants were splinted by a 3- piece implant-supported metal ceramic prosthesis and differed according to the type of misfit as represented by the groups: CG (control group) - prosthesis with complete fit to the implants, UAM (unilateral angular misfit) – prosthesis presenting unilateral angular misfit of 100μm in the mesial region of the 2°M, UVM (unilateral vertical misfit) – prosthesis presenting unilateral vertical misfit of 100μm in the mesial region of the 2°M, and TVM (total vertical misfit) – prosthesis presenting total vertical misfit of 100μm in the platform of the framework in the 2°M. A vertical load of 400N was distributed and applied on 12 centric points by the software Ansys®. So, vertical loading of 150N was applied on each molar while vertical load of 100N was applied on the 2°PM. Stress maps were obtained by processing of the finite element software. Results: The stress values and distribution on peri-implant bone tissue were similar for all groups. The groups presenting misfit exhibited different distribution pattern and increased stress magnitude in comparison to the group CG. The highest stress values in group UAM were observed in the implant body and retention screw. The groups UVM and TVM exhibited high stress values in the platform of the framework... (Complete abstract click electronic access below)
Styles APA, Harvard, Vancouver, ISO, etc.
5

Gomes, Érica Alves. « Estudo do desajuste angular e vertical em próteses fixas implantossuportadas por meio do MEF-3D / ». Araçatuba : [s.n.], 2009. http://hdl.handle.net/11449/105579.

Texte intégral
Résumé :
Resumo: Objetivo: A análise pelo método dos elementos finitos tridimensional foi utilizada para avaliar o efeito dos desajustes angular e vertical simulado em próteses fixas implantossuportadas parafusadas de 3 elementos, na resposta biomecânica do tecido ósseo peri-implantar, implantes e componentes protéticos. Material e método: Foram confeccionados 4 modelos tridimensionais, representativos de secção mandibular direita contendo um implante na região de segundo pré-molar (2oPM) e outro na região de segundo molar (2oM) ferulizados por uma prótese metalocerâmica implantossuportada parafusada de 3 elementos, diferenciados pelo tipo de desajuste protético, gerando os grupos: GC (grupo controle) - prótese totalmente adaptada aos implantes, DAU (desajuste angular unilateral) - prótese com desajuste angular unilateral de 100μm na região mesial do 2oM, DVU (desajuste vertical unilateral) - prótese com desajuste vertical unilateral de 100μm na região mesial do 2oM e DVT (desajuste vertical total) - prótese com desajuste vertical de 100μm em toda a plataforma de assentamento da infraestrutura no 2oM. Com a utilização do programa de elementos finitos Ansys® uma força vertical total de 400N foi distribuída em 12 pontos de parada cêntrica, sendo que cada molar recebeu um carregamento total de 150N e o 2oPM de 100N, gerando mapas de tensões. Resultados: Verificou-se que a distribuição e os valores de tensões para o tecido ósseo peri-implantar foram similares para todos os grupos. Os grupos com desajustes alteraram o padrão de distribuição e elevaram a magnitude das tensões em relação ao grupo GC. No grupo DAU os maiores valores de tensões foram observados no corpo do implante e parafuso de retenção. Já nos grupos DVU e DVT elevados valores de tensões foram encontrados na plataforma de assentamento da infraestrutura... (Resumo completo, clicar acesso eletrônico abaixo)
Abstract: Purpose: The three-dimensional finite element analysis was used to evaluate the effect of vertical and angular misfit in 3-piece implant-supported and screw-retained fixed prostheses on biomechanical response in peri-implant bone tissue, implants and prosthetic components. Material and method: Four three-dimensional models were fabricated to represent a right posterior mandibular section with one implant in the region of second premolar (2°PM) and other in the region of second molar (2°M). The implants were splinted by a 3- piece implant-supported metal ceramic prosthesis and differed according to the type of misfit as represented by the groups: CG (control group) - prosthesis with complete fit to the implants, UAM (unilateral angular misfit) - prosthesis presenting unilateral angular misfit of 100μm in the mesial region of the 2°M, UVM (unilateral vertical misfit) - prosthesis presenting unilateral vertical misfit of 100μm in the mesial region of the 2°M, and TVM (total vertical misfit) - prosthesis presenting total vertical misfit of 100μm in the platform of the framework in the 2°M. A vertical load of 400N was distributed and applied on 12 centric points by the software Ansys®. So, vertical loading of 150N was applied on each molar while vertical load of 100N was applied on the 2°PM. Stress maps were obtained by processing of the finite element software. Results: The stress values and distribution on peri-implant bone tissue were similar for all groups. The groups presenting misfit exhibited different distribution pattern and increased stress magnitude in comparison to the group CG. The highest stress values in group UAM were observed in the implant body and retention screw. The groups UVM and TVM exhibited high stress values in the platform of the framework... (Complete abstract click electronic access below)
Orientador: Wirley Gonçalves Assunção
Coorientador: Edson Antônio Capello Sousa
Banca: Paulo Henrique dos Santos
Banca: Ricardo Faria Ribeiro
Banca: João Neudenir Arioli Filho
Doutor
Styles APA, Harvard, Vancouver, ISO, etc.
6

Silva, Jonathan Esteban Arroyo. « Acoplamento de interface Iterativo MEF—MEFE para problemas do tipo sólido-fluido no domínio do tempo ». Universidade Federal de Juiz de Fora (UFJF), 2018. https://repositorio.ufjf.br/jspui/handle/ufjf/6911.

Texte intégral
Résumé :
Submitted by Renata Lopes (renatasil82@gmail.com) on 2018-06-29T15:51:42Z No. of bitstreams: 0
Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2018-07-03T15:49:10Z (GMT) No. of bitstreams: 0
Made available in DSpace on 2018-07-03T15:49:10Z (GMT). No. of bitstreams: 0 Previous issue date: 2018-03-27
CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Neste trabalho será proposto um método de acoplamento iterativo de interface com um esquema de subcycling no tempo eficiente e preciso. Este será aplicado a pro-blemas do tipo sólido-fluido discretizados, respectivamente, pelos métodos dos elementos finitos clássico (MEF) e espectral (MEFE). Adicionalmente, será proposta uma melhoria no esquema de subcycling, de modo que para convergir não sejam necessários métodos de relaxação. Aplicando o MEFE em subdomínios com geometrias pouco distorcidas, pode-se usufruir da alta precisão numérica com baixo custo de armazenamento oferecidos pelo método ao mesmo tempo em que é possível aplicar o MEF aos subdomínios com geometrias complexas, acrescentando versatilidade ao método. Diferentes exemplos nu-méricos são apresentados e analisados para demonstrar a precisão e a potencialidade das formulações numéricas propostas.
In this work, an iterative interface coupling method with an efficient and precise time subcycling scheme is proposed. It is applied to solid-fluid type problems discretized respectively by classical finite element method (FEM) and spectral finite element method (SFEM), additionally, an improvement in the subcycling scheme is proposed so as not to require relaxation methods to converge. Applying the SFEM in subdomains with low distorted geometries one can take advantage of the high numerical precision with low cost of storage offered by the method, while it is possible to apply the FEM in subdomains with complex geometries, adding versatility to the method. Many numerical examples are presented and analyzed here to show the accuracy and potentiality of the proposed numerical formulations.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Gomes, Érica Alves [UNESP]. « Efeito da ausência de passividade no sistema coroa-implante-parafuso de retenção por meio do MEF-2D ». Universidade Estadual Paulista (UNESP), 2006. http://hdl.handle.net/11449/97373.

Texte intégral
Résumé :
Made available in DSpace on 2014-06-11T19:28:57Z (GMT). No. of bitstreams: 0 Previous issue date: 2006-12-12Bitstream added on 2014-06-13T20:37:55Z : No. of bitstreams: 1 gomes_ea_me_araca.pdf: 1098815 bytes, checksum: 1bafd8a36608b27cf45144d22d87c56d (MD5)
Odonto Mega
Objetivo: avaliar o deslocamento e distribuição interna de tensões do sistema coroa/implante/parafuso de retenção e tecido ósseo adjacente, em função de diferentes níveis de desadaptação angular unilateral, por meio do MEF-2D. Materiais e método: foram confeccionados 4 modelos matemáticos, representativos de coroa metálica conectada a implante por meio de parafuso deretenção, inseridos em tecido ósseo, determinando os 4 grupos estudados: Grupo 1 (controle), coroa completamente adaptada ao implante; Grupo 2, 3 e 4, coroa com desadaptações angulares unilaterais de 50æm, 100æm e 200æm, respectivamente. A partir do programa de elementos finitos Ansys, os modelos receberam carga de 133N, com angulação de 30o e deslocamento de 2mm do longo eixo do implante em lado oposto a desadaptação, sendo analisados os mapas de tensões e deslocamento. Resultados: com o aumento das desadaptações angulares, os mapas de tensões mostraram aumento gradativo das tensões na coroa (1056 N/mm2 a 2326N/mm2) e no parafuso de retenção (909.91 N/mm2 a 987.02N/mm2) e uniformidade na distribuição de tensões no implante e tecido ósseo medular. Quanto ao deslocamento, verificou-se inclinação do conjunto de 0.3101mm (controle) a 0.3179mm no grupo 4, em função do carregamento e das desadaptações. Conclusão: a redução do contato unilateral entre a coroa e o implante levou ao deslocamento de todo conjunto e alteração na distribuição e magnitude das tensões ao longo do sistema, principalmente na região da coroa e parafuso de retenção, sendo que, de modo geral, as desadaptações angulares unilaterais de 100æm e 200æm mostraram maiores valores de tensões em relação ao controle.
Objectives: the aim of this study was to evaluate the displacement and stress inner distribution of the prostheses/implant/abutment screw set and surrounding bone, with prostheses presenting different levels of angular misfit unilateral through FEA-2D. Materials and methods: four mathematic models were made, representing metal prostheses in connection of the implant through abutment screw, inside bone tissue, determining 4 groups: Group 1 (control) prostheses fit on the implant; Groups 2, 3 and 4, prostheses with angular misfit unilateral of 50æm, 100æm and 200æm, respectively. It was applied a load of 133N with 30o angulation and off-axis at 2mm of long axis of the implant in opposite direction of misfit on the models, through finite element program Ansys. Results: with upper of angular misfit, the stress maps showed gradual increased of prostheses stress (1056N/mm2 at 2326N/mm2) and uniform stress distribution in the implant and trabecular bone. About the displacement, observed inclination of the set of 0.3101mm (control) at 0.3179mm in the group 4 due to loading and misfit. Conclusions: the lower of the unilateral contact between prostheses and implant proportionate the displacement of all set and the distribution and magnitude alterations of the stress of all the system, principally in the prostheses and abutment screw regions; as a general rule, the angular misfit unilateral of the 100æm and 200æm showed higher stress values in relation to the control.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Gomes, Érica Alves. « Efeito da ausência de passividade no sistema coroa-implante-parafuso de retenção por meio do MEF-2D / ». Araçatuba : [s.n.], 2006. http://hdl.handle.net/11449/97373.

Texte intégral
Résumé :
Orientador: Wirley Gonçalves Assunção
Banca: Paulo Henrique dos Santos
Banca: Flávio Domingues das Neves
Resumo: Objetivo: avaliar o deslocamento e distribuição interna de tensões do sistema coroa/implante/parafuso de retenção e tecido ósseo adjacente, em função de diferentes níveis de desadaptação angular unilateral, por meio do MEF-2D. Materiais e método: foram confeccionados 4 modelos matemáticos, representativos de coroa metálica conectada a implante por meio de parafuso deretenção, inseridos em tecido ósseo, determinando os 4 grupos estudados: Grupo 1 (controle), coroa completamente adaptada ao implante; Grupo 2, 3 e 4, coroa com desadaptações angulares unilaterais de 50æm, 100æm e 200æm, respectivamente. A partir do programa de elementos finitos Ansys, os modelos receberam carga de 133N, com angulação de 30o e deslocamento de 2mm do longo eixo do implante em lado oposto a desadaptação, sendo analisados os mapas de tensões e deslocamento. Resultados: com o aumento das desadaptações angulares, os mapas de tensões mostraram aumento gradativo das tensões na coroa (1056 N/mm2 a 2326N/mm2) e no parafuso de retenção (909.91 N/mm2 a 987.02N/mm2) e uniformidade na distribuição de tensões no implante e tecido ósseo medular. Quanto ao deslocamento, verificou-se inclinação do conjunto de 0.3101mm (controle) a 0.3179mm no grupo 4, em função do carregamento e das desadaptações. Conclusão: a redução do contato unilateral entre a coroa e o implante levou ao deslocamento de todo conjunto e alteração na distribuição e magnitude das tensões ao longo do sistema, principalmente na região da coroa e parafuso de retenção, sendo que, de modo geral, as desadaptações angulares unilaterais de 100æm e 200æm mostraram maiores valores de tensões em relação ao controle.
Abstract: Objectives: the aim of this study was to evaluate the displacement and stress inner distribution of the prostheses/implant/abutment screw set and surrounding bone, with prostheses presenting different levels of angular misfit unilateral through FEA-2D. Materials and methods: four mathematic models were made, representing metal prostheses in connection of the implant through abutment screw, inside bone tissue, determining 4 groups: Group 1 (control) prostheses fit on the implant; Groups 2, 3 and 4, prostheses with angular misfit unilateral of 50æm, 100æm and 200æm, respectively. It was applied a load of 133N with 30o angulation and off-axis at 2mm of long axis of the implant in opposite direction of misfit on the models, through finite element program Ansys. Results: with upper of angular misfit, the stress maps showed gradual increased of prostheses stress (1056N/mm2 at 2326N/mm2) and uniform stress distribution in the implant and trabecular bone. About the displacement, observed inclination of the set of 0.3101mm (control) at 0.3179mm in the group 4 due to loading and misfit. Conclusions: the lower of the unilateral contact between prostheses and implant proportionate the displacement of all set and the distribution and magnitude alterations of the stress of all the system, principally in the prostheses and abutment screw regions; as a general rule, the angular misfit unilateral of the 100æm and 200æm showed higher stress values in relation to the control.
Mestre
Styles APA, Harvard, Vancouver, ISO, etc.
9

Frare, Vanessa Cristina. « Desenvolvimento de um meio semi-seletivo para detecção de Acidovorax avenae subsp. citrulli em sementes de melão (Cucumis melo L.) ». Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/11/11135/tde-22022006-145257/.

Texte intégral
Résumé :
Um dos principais fatores limitantes da produção do melão é a ocorrência de doenças. Entre os patógenos mais importantes estão as bactérias, que causam perdas significativas na produção. Causada pela bactéria Acidovorax avenae subsp. citrulli (Aac), a mancha-aquosa-do-melão, também conhecida como mancha-bacteriana-dofruto, é uma doença grave, que tem preocupado produtores do nordeste, sendo que todos os tipos de melão apresentam suscetibilidade ao patógeno. A principal fonte de inóculo para esta bactéria é a semente infectada. Este trabalho teve como objetivo o desenvolvimento de um meio semi-seletivo para detecção e identificação de Acidovorax avenae subsp. citrulli em sementes de melão, para testes de rotina em laboratórios de patologia de sementes. Por meio de testes de fungitoxicidade, antibiogramas qualitativos e quantitativos e testes bioquímicos foi desenvolvido o seguinte meio semiseletivo para a detecção de Aac em sementes de melão: dextrose (5 g/L), NaCl (5 g/L), peptona (5 g/L), KH2PO4 (2 g/L), MgSO4.7H2O (0,2 g/L), vermelho de fenol (0,012 g/L), uréia (25 g/L), agar (17 g/L), benomil (100 mg/L), nistatina (200 mg/L) e amoxicilina (15 mg/L).
One of the main limiting factors of the melon production is the occurrence of diseases. The bacteria are among the most important pathogens causing significant losses in the production. Caused by the bacterium Acidovorax avenae subsp. citrulli (Aac), the bacterial-fruit-blotch is a serious disease that affects all types of melon and has worried northeast producers. The main source of inoculum for this bacterium is the infected seed. This work had as objective the development of a semi-selective medium to detect and identify Acidovorax avenae subsp. citrulli in melon seeds, for routine tests in seed pathology laboratories. By means of fungitoxicity tests, qualitative and quantitative antibiograms and biochemical tests the following semi-selective medium to detect Aac in melon seeds was developed: dextrose (5 g/L), NaCl (5 g/L), peptone (5 g/L), KH2PO4 (2 g/L), MgSO4.7H2O (0,2 g/L), phenol red (0,012 g/L), urea (25 g/L), agar (17 g/L), benomil (100 mg/L), nistatina (200 mg/L) and amoxicilin (15 mg/L).
Styles APA, Harvard, Vancouver, ISO, etc.
10

Ferreira, Mayara Barbosa [UNESP]. « Avaliação da distribuição de tensões em próteses do tipo protocolo mandibular para carregamento imediato por meio do MEF-3D ». Universidade Estadual Paulista (UNESP), 2013. http://hdl.handle.net/11449/108877.

Texte intégral
Résumé :
Made available in DSpace on 2014-08-27T14:36:42Z (GMT). No. of bitstreams: 0 Previous issue date: 2013-08-30Bitstream added on 2014-08-27T15:57:10Z : No. of bitstreams: 1 000749476.pdf: 2329747 bytes, checksum: 03a2fd6929cc767c1fa0d33bd2730969 (MD5)
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Proposição: Esse estudo comparou a distribuição das tensões em 3 diferentes tipos de próteses fixas implanto-suportadas mandibulares para carregamento imediato com o protocolo convencional de dois estágios cirúrgicos, no que diz respeito à distribuição de tensões, por meio do Método de Elementos Finitos tridimensional não linear. Materiais e Métodos: Quatro modelos de mandíbula humana edêntula suporte de prótese fixa implanto-suportada com quatro implantes foram construídos. Os modelos foram divididos em 4 grupos: Grupo A (controle) – os implantes foram rigidamente esplintados por meio de infraestrutura metálica, e submetidos ao protocolo de carregamento convencional de dois estágios cirúrgicos; no Grupo B – os implantes não foram rigidamente esplintados (esplintagem por meio de resina acrílica), e submetidos ao protocolo de carregamento imediato; no Grupo C – os implantes foram rigidamente esplintados por meio de infraestrutura metálica e submetidos ao protocolo de carregamento imediato; no Grupo D – os implantes não foram rigidamente esplintados (esplintagem por meio de resina acrílica), sendo que foi inserido na região do cantilever uma barra-distal pré-fabricada, e foram submetidos ao protocolo de carregamento imediato.Para simular a condição de carregamento imediato dos implantes (Grupos B, C e D), elementos de contato não linear e friccional foram usados. O coeficiente de fricção de 0,3 ? foi utilizado entre o osso e o implante. No modelo A foi considerado um contato colado na interface osso-implante. Os modelos foram suportados pelos músculos da mastigação e pela articulação temporomandibular. Uma carga de 100 N no sentido oblíquo...
Purpose: This study compared the stress distribution between 3 different mandibular full-arch implant-supported fixed dentures submitted to immediate loading and conventional full-arch implant-supported fixed denture through three-dimensional finite element analysis. Materials and Methods: Four models of edentulous human mandible were fabricated with 4 implants for restoration with full-arch implant-supported fixed denture. The models were divided into 4 groups: Group A (control) – implants were splinted with metallic framework and submitted to conventional loading protocol after 2 surgical steps, Group B – implants were splinted with acrylic resin and submitted to immediate loading, Group C – implants were splinted with metallic framework and submitted to immediate loading, and Group D – implants were splinted with acrylic resin and submitted to immediate loading with a prefabricated distal bar positioned in the cantilever region. Non-linear and frictional contact elements were used to simulate immediate loading (Groups B, C and D). The coefficient of friction ?=0.3 was established between bone and implant. Direct contact at bone implant interface was assumed in the model A. All models were supported by masticatory muscles and the temporomandibular joint. Oblique load of 100N was applied on mandibular first molar. The values of von Mises (?vM) and maximum (?max) and minimum (?min) principal stresses (in MPa) were obtained. Results: Group A presented the lowest stress values (?vM=147, ?max=102 e ?min=-131 MPa) while group D showed the highest values (?vM=904, ?max=685 e ?min=-1481 MPa). In bone tissue, the groups submitted...
FAPESP: 10/09857-3
FAPESP: 11/15172-6
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Mefo"

1

Bággio, Antônio. Nanetto in meso i búlgari : No meio dos índios. Porto Alegre : EST Edições, 2003.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Śākya, Ashṭalakshmī. Mero pāilā, mero anubhava. Kāṭhamāḍauṃ : Motīdevī Smr̥ti Kendra, 2013.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Mero sr̥shṭi, mero dr̥shṭi. Kathmandu] : Gomādevī Upādhyāya, 2003.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Danīkas, Dimītris. Melo : Melo-dramatikō thrīler. Athēa : Kedros, 1994.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

1978-, Corsaletti Fabrício, Molina Sergio et Piquet Cide, dir. Meio intelectual, meio de esquerda. São Paulo : Editora 34, 2010.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Podracká, Dana. Meno. Bratislava : Slovensky spisovatelʹ, 1999.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Plato. Meno. Chicago, Il : Bolchazy-Carducci, 1985.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Italiano, Monini, dir. Medo. Goiânia : Editora UCG, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Meḷo. 2e éd. Amadāvāda : Ḍivāina Pablikeśansa, 2011.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Memo. Milano : Baldini Castoldi Dalai, 2008.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Mefo"

1

Gadomski, Bartosch, Mario Retzlaff et Fabian Thamm. « Potential Analysis of a DMC/MeFo Mixture in a 4-Cylinder Light Vehicle Gasoline Engine ». Dans Proceedings, 555–68. Wiesbaden : Springer Fachmedien Wiesbaden, 2021. http://dx.doi.org/10.1007/978-3-658-35588-3_33.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Härtl, Martin, Dominik Pélerin, Patrick Dworschak, Thomas Maier, Andreas Stadler, Sebastian Blochum, Kai Gaukel, Eberhard Jacob et Georg Wachtmeister. « Potential of the sustainable C1 fuels OME, DMC, and MeFo for particle-free combustion in SI and CI engines ». Dans Proceedings, 459–78. Wiesbaden : Springer Fachmedien Wiesbaden, 2018. http://dx.doi.org/10.1007/978-3-658-21015-1_29.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Bährle-Rapp, Marina. « Cucumis melo ». Dans Springer Lexikon Kosmetik und Körperpflege, 135. Berlin, Heidelberg : Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_2550.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Bartel, Daniela. « Melo, Patrícia ». Dans Kindlers Literatur Lexikon (KLL), 1. Stuttgart : J.B. Metzler, 2020. http://dx.doi.org/10.1007/978-3-476-05728-0_13138-1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Toulemonde, Joules. « Memo Pillbox ». Dans Designed Technologies for Healthy Aging, 62–65. Cham : Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-031-01598-4_15.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Dekker, Sidney. « The meso ». Dans Compliance Capitalism, 75–104. London : Routledge, 2021. http://dx.doi.org/10.4324/9781003177807-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Mihas, Paul. « Memo Writing ». Dans Expanding Approaches to Thematic Analysis, 46–59. London : Routledge, 2024. http://dx.doi.org/10.4324/9781003389149-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Schomburg, Dietmar, Margit Salzmann et Dörte Stephan. « meso-Tartrate dehydrogenass ». Dans Enzyme Handbook, 387–89. Berlin, Heidelberg : Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-58051-2_80.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Kalma, Jetse D., Gregory P. Laughlin, Joseph M. Caprio et Paul J. C. Hamer. « Meso-Scale Processes ». Dans Advances in Bioclimatology, 32–43. Berlin, Heidelberg : Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-58132-8_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Wenzel, Henrik, Michael Hauschild et Leo Alting. « The MECO Principle ». Dans Environmental Assessment of Products, 135–38. Boston, MA : Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6367-9_12.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Mefo"

1

Kraus, Christoph, Felix Fellner, Akiyasu Miyamoto, Henning Sauerland, Martin Härtl et Malte Jaensch. « Injector Design and Fuel Pressure Variation for Oxygenated Spark Ignition Fuels ». Dans WCX SAE World Congress Experience. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2023. http://dx.doi.org/10.4271/2023-01-0306.

Texte intégral
Résumé :
<div class="section abstract"><div class="htmlview paragraph">This study provides an overview of injector design adaptations and fuel pressure variations for oxygenated synthetic fuels, benchmarked against gasoline. The promising oxygenated fuels exhibited reduced emissions, especially with respect to particles. In gasoline engines, high fuel pressures are needed to keep the particle emissions below the permitted level. In oxygenated fuels, high fuel pressures are required to compensate for the lower volumetric energy density when used with non-adapted injectors. This study demonstrates that an adapted injector design enables engine operation with a fuel pressure reduction from 35 MPa to 10 MPa, without emission drawbacks.</div><div class="htmlview paragraph">The fuel investigated contained dimethyl carbonate (DMC) and methyl formate (MeFo). The fuel mass contained around 50% oxygen. A relatively high percentage of 35 vol.% MeFo was chosen because of its high vapor pressure, thus providing fast mixture formation and enabling very late compression stroke injections. The basic design adaptations are expected to be transferable to other oxygenated synthetic fuels, e.g., containing methanol (MeOH) and MeFo.</div><div class="htmlview paragraph">The main tests were conducted on a single cylinder research engine, based on a four-cylinder automotive engine. The exhaust gas composition was measured using an FTIR equipped with a fuel-tailored evaluation method, several standard exhaust gas analyzers, and a solid particle counting system with 10 and 23 nm cut-off sizes. The spray from both the two synthetic fuel injectors and the standard injector was further investigated at a spray chamber by means of a high-speed camera. Given a standard injector the spray pattern of 65vol% DMC+ 35vol%MeFo, and 85vol%MeOH+15 vol% MeFo were compared to the pattern of G100. All of the injectors were further investigated at an injection rate analyzer in order to provide necessary information about the injected fuel mass.</div></div>
Styles APA, Harvard, Vancouver, ISO, etc.
2

Binder, Jürgen, Oleg Krecker, Christoph Kraus, Malte Jaensch et Georg Wachtmeister. « Analysis of the Piston Group Friction in a Single-Cylinder Gasoline Engine When Operated with Synthetic Fuel DMC/MeFo ». Dans WCX SAE World Congress Experience. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2022. http://dx.doi.org/10.4271/2022-01-0485.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Maliha, Maliha, Heiko Kubach et Thomas Koch. « Influence of the MeFo and DMC Content in the Fuel on the Gasoline DI Spray Characteristics with the Focus on Droplet Speed and Size ». Dans SAE Powertrains, Fuels & Lubricants Digital Summit. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2021. http://dx.doi.org/10.4271/2021-01-1191.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Kraus, Christoph, Fabian Thamm, Mario Retzlaff, Bartosch Gadomski, Patrick Fitz, Martin Härtl, Steffen Hoppe et Malte Jaensch. « Highly Efficient and Clean Combustion Engine for Synthetic Fuels ». Dans WCX SAE World Congress Experience. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2023. http://dx.doi.org/10.4271/2023-01-0223.

Texte intégral
Résumé :
<div class="section abstract"><div class="htmlview paragraph">This paper provides an overview of possible engine design optimizations by utilizing highly knock-resistant potential greenhouse gas (GHG) neutral synthetic fuels. Historically the internal combustion engine was tailored to and highly optimized for fossil fuels. For future engine generations one of the main objectives is to achieve GHG neutrality. This means that either carbon-free fuels such as hydrogen or potential greenhouse gas neutral fuels are utilized. The properties of hydrogen make its use challenging for mobile application as it is very diffusive, not liquid under standard temperature/pressure and has a low volumetric energy density. C1-based oxygenated fuels such as methanol (MeOH), dimethyl carbonate (DMC) and methyl formate (MeFo) have properties like conventional gasoline but offer various advantages. Firstly, these fuels can be produced with renewable energy and carbon capture technologies to be GHG neutral. Secondly, the C1-based fuels burn with significantly less pollutant emissions. A third advantage is the high knock resistance of those fuels. This inherits a drastic efficiency potential for spark ignition engines as the compression ratio and therefore the potential thermal efficiency can be directly increased. In the single cylinder engine, a compression ratio (CR) of ~20:1 is investigated proving the high knock resistance as well as the efficiency potential of MeOH and a mixture containing 65 vol% DMC and 35 vol% MeFo (C65F35). Special attention is paid to the direct injection strategy, which utilizes up to quadruple injections and 35MPa fuel pressure. Later on, a more moderate CR increase to 15:1 with a CFD optimized piston design is investigated at a state of the art four-cylinder engine (4CE) utilizing C65F35. The whole engine map is presented proving the real-world usability and efficiency potential of this fuel type in combination with the optimized piston. WLTC and RDE tests were performed, underling both the practicality and the efficiency potential in dynamic conditions. The 4CE tests are rounded off by showcasing the potential of lean operation with two different high-energy ignition systems (Corona and passive pre-chamber ignition). The performance investigation on both engines is accompanied by emission measurements utilizing standard exhaust analyzers, an FTIR-device and particle number counting systems.</div></div>
Styles APA, Harvard, Vancouver, ISO, etc.
5

Hong, Stefan, et Yuh-Jzer Joung. « Meso ». Dans the 28th Annual ACM Symposium. New York, New York, USA : ACM Press, 2013. http://dx.doi.org/10.1145/2480362.2480657.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Aberer, Karl, Michele Catasta, Georgios Christodoulou, Ivan Gavrilovic, Filip Hrisafov, Mathieu Monney, Abdessalam Ouaazki et al. « Memo-it ». Dans UbiComp '14 : The 2014 ACM Conference on Ubiquitous Computing. New York, NY, USA : ACM, 2014. http://dx.doi.org/10.1145/2638728.2638753.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Nabeshima, Shinji, Shinichirou Yamamoto, Kiyoshi Agusa et Toshio Taguchi. « MEMO-PEN ». Dans Conference companion. New York, New York, USA : ACM Press, 1995. http://dx.doi.org/10.1145/223355.223662.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

SCULLI, JOHN. « THE MECO EXPERIMENT ». Dans Lepton Flavor Violation and Neutrino Oscillation with High Intense Muon and Neutrino Sources - The New Initiatives. WORLD SCIENTIFIC, 2002. http://dx.doi.org/10.1142/9789812777003_0009.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

« Memo [blank page] ». Dans OCEANS 2008 MTS/IEEE Kobe Techno-Ocean. IEEE, 2008. http://dx.doi.org/10.1109/oceanskobe.2008.4530897.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

« MECO 2024 Committees ». Dans 2024 13th Mediterranean Conference on Embedded Computing (MECO). IEEE, 2024. http://dx.doi.org/10.1109/meco62516.2024.10577859.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Mefo"

1

Gonzalez, Sigifredo. Mojave memo. Office of Scientific and Technical Information (OSTI), juin 2022. http://dx.doi.org/10.2172/1871861.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Goldstein, Noah, Jeff Stewart, Alan Lamont, Evi Dube et Jim Gansemer. Scoping Memo Response. Office of Scientific and Technical Information (OSTI), juin 2010. http://dx.doi.org/10.2172/1124858.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

BENAVIDES, GILBERT L., DAVID P. ADAMS et PIN YANG. Meso-Machining Capabilities. Office of Scientific and Technical Information (OSTI), juin 2001. http://dx.doi.org/10.2172/782720.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Moya, Adam Chris. Ganged Heliostat Modal Memo. Office of Scientific and Technical Information (OSTI), juin 2016. http://dx.doi.org/10.2172/1561504.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Wilke, Jeremiah J. ECP Milestone Memo for 2.3.1.04.16. Office of Scientific and Technical Information (OSTI), septembre 2018. http://dx.doi.org/10.2172/1469762.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Wilke, Jeremiah J. ECP Milestone Deliverable Memo ? 2.3.1.04.15. Office of Scientific and Technical Information (OSTI), septembre 2018. http://dx.doi.org/10.2172/1469763.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Wilke, Jeremiah J. ECP Milestone Memo for 2.3.1.04.14. Office of Scientific and Technical Information (OSTI), septembre 2018. http://dx.doi.org/10.2172/1475259.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Wolfe, Justin E. LSST Painting Risk Evaluation Memo. Office of Scientific and Technical Information (OSTI), novembre 2016. http://dx.doi.org/10.2172/1342020.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Sauer, Jon. Meso-Optics Based WDM Receiver. Fort Belvoir, VA : Defense Technical Information Center, octobre 1999. http://dx.doi.org/10.21236/ada383266.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Lopez, Jose M., Jorge E. Corredor, Julio M. Morell, Jorge E. Capella et Fernando Gilbes. Characterization of Caribbean Meso-Scale Eddies. Fort Belvoir, VA : Defense Technical Information Center, septembre 2006. http://dx.doi.org/10.21236/ada611897.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Mefo » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie