Littérature scientifique sur le sujet « Medium Voltage measurement »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Medium Voltage measurement ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Medium Voltage measurement"
Wetula, Andrzej, Andrzej Bień et Mrunal Parekh. « New Sensor for Medium- and High-Voltage Measurement ». Energies 14, no 15 (31 juillet 2021) : 4654. http://dx.doi.org/10.3390/en14154654.
Texte intégralCrotti, Gabriella, et Domenico Giordano. « Set up and characterization of a measuring system for PQ measurements in a MV site with PV generation ». ACTA IMEKO 4, no 1 (5 février 2015) : 97. http://dx.doi.org/10.21014/acta_imeko.v4i1.171.
Texte intégralKozyra, Jacek. « An analysis of remote voltage measurement in the medium voltage cable networks ». PRZEGLĄD ELEKTROTECHNICZNY 1, no 10 (3 octobre 2022) : 301–8. http://dx.doi.org/10.15199/48.2022.10.67.
Texte intégralArtale, Giovanni, Antonio Cataliotti, Valentina Cosentino, Dario Di Cara, Salvatore Guaiana, Enrico Telaretti, Nicola Panzavecchia et Giovanni Tinè. « Incremental Heuristic Approach for Meter Placement in Radial Distribution Systems ». Energies 12, no 20 (16 octobre 2019) : 3917. http://dx.doi.org/10.3390/en12203917.
Texte intégralPetkovic, Marko, Nicolai Hildebrandt, Francisco D. Freijedo et Drazen Dujic. « Medium Voltage Impedance-Admittance Measurement System Based on the Cascaded H-Bridge Multilevel Converter ». Electronics ETF 22, no 2 (19 septembre 2019) : 105. http://dx.doi.org/10.7251/els1822105p.
Texte intégralMingotti, Alessandro, Christian Betti, Lorenzo Peretto et Roberto Tinarelli. « Simplified and Low-Cost Characterization of Medium-Voltage Low-Power Voltage Transformers in the Power Quality Frequency Range ». Sensors 22, no 6 (15 mars 2022) : 2274. http://dx.doi.org/10.3390/s22062274.
Texte intégralPaulo Vogel, Ederson, et Cesar David Paredes Crovato. « Study of Non-Contact and Non-Ground Voltage Signal Measurement System in Medium Voltage ». IEEE Latin America Transactions 16, no 2 (février 2018) : 416–21. http://dx.doi.org/10.1109/tla.2018.8327394.
Texte intégralCataliotti, Antonio, Valentina Cosentino, Dario Di Cara et Giovanni Tine. « Measurement Issues for the Characterization of Medium Voltage Grids Communications ». IEEE Transactions on Instrumentation and Measurement 62, no 8 (août 2013) : 2185–96. http://dx.doi.org/10.1109/tim.2013.2264861.
Texte intégralGayatri Citra Dewi et Odetta Levin. « Analysis of Nickel(II) in Water Medium using Electrochemical Techniques ». Chemistry and Materials 2, no 1 (28 février 2023) : 24–29. http://dx.doi.org/10.56425/cma.v2i1.49.
Texte intégralČeović, Josip, et Matko Širola. « Medium and Low Voltage Cable Measurements - TD, PD, LIRA ». Journal of Energy - Energija 65, no 1-2 (27 juin 2022) : 24–37. http://dx.doi.org/10.37798/2016651-2125.
Texte intégralThèses sur le sujet "Medium Voltage measurement"
MODARRES, MOHAMMAD. « Development of Reference Tools for Medium Voltage Measurements in Smart Grids ». Doctoral thesis, Politecnico di Torino, 2017. http://hdl.handle.net/11583/2674202.
Texte intégralCARAVELLO, Giuseppe. « Study, project and implementation of new metrics for distributed measurement system in medium voltage smart grid ». Doctoral thesis, Università degli Studi di Palermo, 2022. http://hdl.handle.net/10447/534761.
Texte intégralBosi, Marco. « Development of a distributed measurement system for detection of high impedance faults in medium voltage power lines ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.
Trouver le texte intégralSchneider, Simon Michael [Verfasser], Clemens [Akademischer Betreuer] Gühmann, Uwe [Gutachter] Schäfer, Ronald [Gutachter] Plath et Martin [Gutachter] Doppelbauer. « Test bench design for power measurement of inverter-operated machines in the medium voltage range / Simon Michael Schneider ; Gutachter : Uwe Schäfer, Ronald Plath, Martin Doppelbauer ; Betreuer : Clemens Gühmann ». Berlin : Universitätsverlag der TU Berlin, 2018. http://d-nb.info/117425128X/34.
Texte intégralŠtefanka, Martin. « Aplikace senzorů a digitalizace podle IEC 61850 v sítích a rozvodnách vysokého napětí ». Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-240510.
Texte intégralKolacia, Tomáš. « Měření elektrických veličin v distribučních sítích 22 kV a 0,4 kV s disperzními zdroji ». Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221196.
Texte intégralTerçariol, Walter Luis 1975. « Contribuição ao projeto de circuitos integrados de reguladores de tensão com charge pump em tecnologia CMOS : aceleração do tempo de partida, redução do ripple, redução do efeito kick-back e técnica indireta de medida da tensão de saída ». [s.n.], 2014. http://repositorio.unicamp.br/jspui/handle/REPOSIP/260876.
Texte intégralTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de Computação
Made available in DSpace on 2018-08-26T13:53:46Z (GMT). No. of bitstreams: 1 Tercariol_WalterLuis_D.pdf: 1322557 bytes, checksum: 4f45518a1a62907cd9a61afa627408c3 (MD5) Previous issue date: 2014
Resumo: Este trabalho visa compilar três contribuições na melhoria dos projetos de reguladores de tensão com unidades de bombeamento de carga embutidos (células elevadoras de tensão Dickson - BC). A primeira aborda uma técnica inovadora de arranque na partida deste módulo elevador quando habilitado. Este projeto se refere à aceleração da inicialização do modulo BC, tendo como objetivo a diminuição do intervalo de tempo da rampa ascendente da tensão de saída Vo até atingir o nível alvo de regulação. A técnica consiste em gerenciar o aumento da freqüência do relógio de bombeamento entregue as unidades de bombeamento durante a fase de subida, quando a regulação estiver estabelecida o sistema se regenera voltando ao estado original de freqüência de bombeamento natural. Uma segunda proposta inovadora de projeto é referente à homogeneização e redução da aleatoriedade da ondulação da tensão de saída Vo, referente ao regulador com o modulo BC embutido, baseado em comparadores com trava, com proposta de redução do erro de comparação devido ao efeito aleatório durante o estagio de comparação comumente encontrado neste tipo de abordagem, a técnica consiste em suprimir o acoplamento capacitivo nocivo durante a fase de isolamento elétrico no processo de comparação mantendo o espelho de corrente do comparador na região de saturação. Esta técnica visa proporcionar uma redução significativa da capacitância de desacoplamento utilizada para filtragem da tensão Vo. Uma terceira e última contribuição é referente a uma inovadora técnica de medição indireta da tensão de saída Vo do regulador com módulo BC baseada em uma medida simples e precisa dos pares tensão da porta e fonte (VPS) e corrente elétrica do dreno (Idreno) de um dispositivo NMOS de alta tensão adicionado de modo que duas tensões conhecidas (preestabelecidas) são aplicadas na porta do dispositivo e as respectivas correntes de dreno são mensuradas e uma terceira desconhecida (oriunda do regulador elevador BC) desconhecida pode ser extrapolada de forma simples. Esta técnica visa ser útil para medição de reguladores de baixa potencia pois o carregamento do regulador (Vo) é quase nulo.Todas as inovações e melhorias propostas foram analisadas em veículos de teste (silício) e com as provas de conceito, feitas em simulações elétricas
Abstract: This work aims to compile contributions in improving designs based on voltage regulators with voltage elevator with built-in charge pump CP. The first deals with an innovative technique rump-up this module when enabled. This project refers to the acceleration of startup the CP module, aiming at the reduction of the period of stabilization of the ramp output voltage Vo to the level of regulation target. The technique is to manage increasing the frequency of pumping clock during the phase of rump up and when the setting established the system regenerates back to the original state pumping frequency. A second innovative project proposal was made on the homogenization and reduction of the ripple of the output voltage Vo, referring to the regulator with the |CP module, based on latch comparators , alignment error reduction proposal because of the random effect during the stage comparison commonly found in this type of approach, the technique is to remove the harmful capacitive coupling during electrical isolation phase on the comparison keeping the comparator current mirror in saturation region. This technique aims to provide a significant reduction in the decoupling capacitance used for filtering the voltage Vo. A third and final contribution is related to an innovative technique of indirect measurement of the output voltage Vo of the regulator module CP, based on a simple and accurate measure of the gate voltage and couples the drain electric current of a high voltage NMOS device
Doutorado
Eletrônica, Microeletrônica e Optoeletrônica
Doutor em Engenharia Elétrica
Aquilué, de Pedro Ricardo. « Power line communications for the electrical utility : physical layer design and channel modeling ». Doctoral thesis, Universitat Ramon Llull, 2008. http://hdl.handle.net/10803/9138.
Texte intégralEn aquesta Tesi s'introduiran i es comentaran les particularitats de les tres xarxes elèctriques, després, es mostraran al lector les solucions tecnològiques existents pels canals de BV basats en la norma Europea CENELEC així com pels canals d'AV, mostrant que els sistemes actuals de LAC ofereixen una diversitat freqüencial molt baixa i que els mòdems CXE-AV estan ancorats en estendards antiquats.
Aquest treball es mou per les tres topologies de la xarxa, particularment, en aplicacions orientades a la banda CENELEC, en mesura i modelat de canal, i en mesura i disseny del nivell físic per sistemes CXE-BV, CXE-MV i CXE-AV respectivament. Els sistemes actuals que exploten la banda CENELEC ofereixen mecanismes d'explotació de la diversitat freqüencial del canal molt limitats o nuls, donant lloc a una baixa robustesa en front a interferències i soroll de fons acolorit. Aquest treball proposa un esquema de modulació multiportadora que, mantenint una complexitat baixa, ofereix unes altes prestacions permetent un bon nivell d'explotació de la selectivitat freqüencial. Per al que a CXE-MV respecta, aquesta Tesi desenvolupa un model de canal determinístic-estadístic pels anells urbans de distribució de potència i, finalment, en sistemes CXE-AV, aquest treball proposa, basat en mesures de canal i proves de camp, un nivell físic de banda ampla capaç de incrementar la velocitat de comunicació mentre manté una baixa densitat espectral de potència limitant així la interferència a altres sistemes.
PARAULES CLAU: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.
El mundo de las comunicaciones por la red eléctrica (CRE) puede ser dividido en tres grandes tipos: CRE en bajo voltaje (CRE-BV), en medio voltaje (CRE-MV) y en alto voltaje (CRE-AV). En estos últimos años, las CRE-BV han atraído una gran expectación, ya que sus capacidades han hecho de esta tecnología una buena opción como alternativa para el bucle local de acceso y para el despliegue de redes de área local, focalizadas estas últimas en el entorno doméstico. Además, las CRE-BV incluyen un conjunto de aplicaciones de baja velocidad orientadas al operador como la lectura automática de contadores (LAC), distribución de carga, facturación dinámica, etc. Por otro lado, las CRE-MV y CRE-AV, históricamente ligadas a tareas de telecontrol y teleprotección, se están empezando a considerar como un canal de comunicaciones eficiente y fiable. El desarrollo de sistemas digitales y los esfuerzos de estandarización están haciendo de estos canales un medio atractivo para que los operadores eléctricos ofrezcan servicios de comunicaciones, ya que no necesitan invertir en infraestructura porque la red eléctrica ya está desplegada.
En esta Tesis se introducirán y se comentarán las particularidades de las tres redes eléctricas, luego, se mostrarán al lector las soluciones tecnológicas existentes para los canales de BV basados en la norma Europea CENELEC así como para los canales de AV, mostrando que los sistemas actuales de LAC ofrecen una diversidad frecuencial muy baja y que los módems CRE-AV están anclados en estándares anticuados.
Este trabajo se mueve por las tres topologías de red, particularmente, en aplicaciones orientadas a la banda CENELEC, en medida y modelado de canal, y en medida y diseño del nivel físico para sistemas CRE-BV, CRE-MV y CRE-AV respectivamente. Los sistemas actuales que explotan la banda CENELEC ofrecen mecanismos de explotación de la diversidad frecuencial del canal muy limitados o nulos, dando lugar a una escasa robustez frente a interferencias y ruido de fondo coloreado. Este trabajo propone un esquema de modulación multiportadora que, manteniendo una complejidad baja, ofrece unas altas prestaciones permitiendo un buen nivel de explotación de la selectividad frecuencial. Por lo que a CRE-MV respecta, esta Tesis desarrolla un modelo de canal determinístico-estadístico para los anillos urbanos de distribución de potencia y, finalmente, en sistemas de CRE-AV, este trabajo propone, basado en medidas de canal y pruebas de campo, un nivel físico de banda ancha capaz de incrementar la velocidad de comunicación mientras mantiene una baja densidad espectral de potencia limitando así la interferencia a otros sistemas.
PALABRAS CLAVE: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.
The world of Power line communications (PLC) can be divided into three main types: low voltage PLC (LV-PLC), medium voltage PLC (MV-PLC) and high voltage PLC (HV-PLC). These last years, LV-PLC has attracted a great expectation since its wideband capabilities has made this technology a suitable choice for last-mile access and in-home communications. Moreover, LV-PLC also includes a utility oriented low frequency and low speed applications, such as automatic meter reading (AMR), load distribution, dynamic billing and so on. On the other hand, MV-PLC and HV-PLC, historically oriented to teleprotection and telecontrol tasks, are being considered as a reliable communication channel. The development of digital equipment and the standardization efforts are making those channels an attractive medium for electrical utilities telecommunications services, since the network, as well as in LV-PLC, is already deployed.
In this PhD dissertation, the three different PLC topologies are reviewed and the different communications techniques in such channels exposed. Then, a deep technological review of existing AMR solutions for the European CENELEC band, as well as HV-PLC systems is given, showing that existing AMR systems deliver low frequency diversity and HV-PLC systems are anchored in old fashioned standards.
This work walks around the three topologies, specifically, CENELEC band utility oriented applications, channel measurement and modeling and channel measurement and physical layer design, regarding LV-PLC, MV-PLC and HV-PLC respectively. Existing CENELEC compliant systems deliver low or none frequency diversity mechanisms, yielding in a low robustness against colored noise and interference. This work propose a multicarrier based physical layer approach that, while keeping the complexity low, delivers high performance allowing a great level of frequency diversity. Focusing on MV-PLC, a hybrid deterministic-statistical channel model for urban underground rings is developed and, finally, in HV-PLC systems, this work proposes, based on measurements and field tests, a wideband physical layer in order to increase data rate while keeping low both the power spectral density and possible interference to other systems.
KEYWORDS: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.
Silva, Luiz Pinheiro Cordovil da. « Interferômetros recuperadores de baixa tensão de meia onda para sistemas interferométricos de luz branca utilizando moduladores eletro-ópticos ». Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/3/3143/tde-08122011-153421/.
Texte intégralThis work has as objective the study and development of low half-wave voltage recovery interferometers using electro-optical modulators to be applied to white light interferometric systems. This work is a continuation in the research carried out by the author to obtain his master degree, in which it was developed and tested an electro- optic sensing system capable to measure direct voltage to 69.4 kVrms. In the present work the optical signals processing system is improved by developing a new recovery interferometer based on integrated optics. To develop the proposed subject, initially a review of the literature, based on books, articles and thesis, has been done aiming to identify the State of the Art related to electro-optic modulators and helping to define the most suitable type of modulator for the desired application. The study resulted in the selection of an integrated optical device arranged in an unpublished configuration that was applied to a prototype of optical voltage transformer, intended to measure high voltage levels. The performance of this prototype was compared with a previous version. The results of this work increase the knowledge of the construction techniques of recovery interferometers based on integrated optic devices applicable to the recovering of optical signals in interferometric systems for high voltage measurement.
Egner, Sean Robert William. « HARMONIC INVESTIGATION IN LOW AND MEDIUM VOLTAGE NETWORKS USING COMPUTER SIMULATION AND MEASUREMENT DEVICES ». Thesis, 2006. http://hdl.handle.net/10539/1518.
Texte intégralThis dissertation discusses the development of an ATP model of a network to aid measurement techniques in a harmonic evaluation. A theoretical back- ground discussion of various pieces of equipment and their signi#12;cance to har- monics is included. National Electricity Regulator (NRS 048) standards are discussed with refer- ence to performing a basic investigation and short comings. A test study was performed on the Brandspruit Mine in Secunda. ATP models are developed for equipment relevant to the test case, these in- clude AC{AC converters, AC{DC converters, three phase transformers and cables. Finally the measured test case is compared to simulation results and conclusions drawn.
Chapitres de livres sur le sujet "Medium Voltage measurement"
Jebamony, David, Manjunath Ramesh, Bastian Wölke et Pascal Thyssen. « Evaluation and Performance Benchmarking of Partial Discharge Measurement Sensors Technologies Based on Non-conventional PD Measurement System for Medium Voltage GIS Applications ». Dans Lecture Notes in Electrical Engineering, 887–98. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31676-1_83.
Texte intégralLee, Seungjoon, Donghwan Shin, Yonghwa Kim, Jaejo Lee et Kihwan Eom. « Measurements and Modeling of Noise on 22.9-kV Medium-Voltage Underground Power Line for Broadband Power Line Communication ». Dans Communications in Computer and Information Science, 316–24. Berlin, Heidelberg : Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-16444-6_41.
Texte intégralBrock, Fred V., et Scott J. Richardson. « Static Performance Characteristics ». Dans Meteorological Measurement Systems. Oxford University Press, 2001. http://dx.doi.org/10.1093/oso/9780195134513.003.0005.
Texte intégralMagee, Patrick, et Mark Tooley. « Ultrasound and Doppler ». Dans The Physics, Clinical Measurement and Equipment of Anaesthetic Practice for the FRCA. Oxford University Press, 2011. http://dx.doi.org/10.1093/oso/9780199595150.003.0014.
Texte intégraluszcz, Jarosaw. « Voltage Harmonics Measuring Issues in Medium Voltage Systems ». Dans Power Quality Harmonics Analysis and Real Measurements Data. InTech, 2011. http://dx.doi.org/10.5772/16411.
Texte intégralAbdel Aziz, Mohamed Salah El-Din Ahmed, Mohamed Ahmed Moustafa Hassan et Fahmy M. A. Bendary. « Loss of Excitation Protection of Medium Voltage Hydro Generators Using Adaptive Neuro Fuzzy Inference System ». Dans Advances in System Dynamics and Control, 253–85. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-4077-9.ch009.
Texte intégralActes de conférences sur le sujet "Medium Voltage measurement"
Faifer, Marco, Roberto Ottoboni, Sergio Toscani, Claudio Cherbaucich, Mario Gentili et Paolo Mazza. « A medium voltage signal generator for the testing of voltage measurement transducers ». Dans 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, 2013. http://dx.doi.org/10.1109/i2mtc.2013.6555408.
Texte intégralFaifer, Marco, Roberto Ottoboni, Sergio Toscani, Paolo Mazza et Claudio Cherbaucich. « Characterization of an arbitrary medium voltage signal generator ». Dans 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, 2014. http://dx.doi.org/10.1109/i2mtc.2014.6860720.
Texte intégralEl-Refaie, El-Sayed M., Mohi Besheir, M. K. Abd Elrahman et Ramy Saad. « Partial Discharge measurement for medium voltage cables using different voltage wave forms ». Dans 2014 International Symposium on Electrical Insulating Materials (ISEIM). IEEE, 2014. http://dx.doi.org/10.1109/iseim.2014.6870782.
Texte intégralGottschlich, Jan, Pelle Weiler, Markus Neubert et Rik W. De Doncker. « Delta-sigma modulated voltage and current measurement for medium-voltage DC applications ». Dans 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe). IEEE, 2017. http://dx.doi.org/10.23919/epe17ecceeurope.2017.8099258.
Texte intégralYu Xiang et J. F. G. Cobben. « Probabilistic analysis on measurement timescale in medium voltage grid ». Dans 2013 13th International Conference on Environment and Electrical Engineering (EEEIC). IEEE, 2013. http://dx.doi.org/10.1109/eeeic-2.2013.6737882.
Texte intégralSchoder, Karl, Mischa Steurer, Ferene Bogdan, John Hauer, James Langston, Dushan Boroyevich, Rolando Burgos, Igor Cvetkovic, Zhiyu Shen et Christina DiMarino. « Testing of a novel medium voltage impedance measurement unit ». Dans 2015 IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA). IEEE, 2015. http://dx.doi.org/10.1109/wipda.2015.7369273.
Texte intégralKannappan, Manickavasagan, Chandan Kumar Chakrabarty et Goh Chin Hock. « Radiometric partial discharge location detection in medium voltage switchgears ». Dans 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA). IEEE, 2013. http://dx.doi.org/10.1109/icsima.2013.6717952.
Texte intégralXiping, Huang, Wang Xin et Qiang Wen. « Development of On-line Monitoring Equipment of Medium Voltage Switchgear ». Dans 2007 8th International Conference on Electronic Measurement and Instruments. IEEE, 2007. http://dx.doi.org/10.1109/icemi.2007.4350936.
Texte intégralXiao, Fei, Guorun Yang, Xuexin Fan, Zhen Xie, Ruitian Wang et Xiaotao Han. « Design of an isolated medium-frequency medium-voltage high-power three-level H-bridge DC/DC converter ». Dans 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, 2014. http://dx.doi.org/10.1109/i2mtc.2014.6860821.
Texte intégralShen, Zhiyu, Marko Jaksic, Igor Cvetkovic, Rolando Burgos et Dushan Boroyevich. « Small-signal impedance measurement in medium-voltage dc power systems ». Dans 2015 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS). IEEE, 2015. http://dx.doi.org/10.1109/esars.2015.7101537.
Texte intégralRapports d'organisations sur le sujet "Medium Voltage measurement"
Alizadeh, Omid, Niroj Gurung, Farid Katiraei, Muhidin Lelic, Ahmad Momeni, Aleksi Paaso, Paul Pabst, Douglas Proudfoot et Farnoosh Rahmatian. Sensors with Intelligent Measurement Platform and Low-cost Equipment (SIMPLE) for Monitoring and Control of Medium Voltage Distribution Systems with High Penetration of Intermittent Distributed Energy Resources. Office of Scientific and Technical Information (OSTI), mars 2021. http://dx.doi.org/10.2172/1774040.
Texte intégral