Bibliographies thématiques / Mechanical technique

Littérature scientifique sur le sujet « Mechanical technique »

Auteur : Grafiati
Publié le 10 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Mechanical technique ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Mechanical technique"

1

Chatwin, Michelle, et Anita Simonds. « Mechanical Technique for Assisted Cough ». Physiotherapy 88, no 6 (juin 2002) : 381–82. http://dx.doi.org/10.1016/s0031-9406(05)60758-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

EREMIA, SORIN. « The Minimal Mechanical Trauma Technique ». Dermatologic Surgery 23, no 12 (décembre 1997) : 1224. http://dx.doi.org/10.1111/j.1524-4725.1997.tb00485.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Molloy, Sean, Bradd G. Burkhart, Louis E. Jasper, Matthew C. Solan, John T. Campbell et Stephen M. Belkoff. « Biomechanical Comparison of Two Fixation Methods for First Metatarsophalangeal Joint Arthrodesis ». Foot & ; Ankle International 24, no 2 (février 2003) : 169–71. http://dx.doi.org/10.1177/107110070302400212.

Texte intégral
Résumé :
Purpose: The aim of this study was to compare the mechanical stability of two methods of fixation for arthrodesis of the hallux metatarsophalangeal joint: a technique using an intramedullary screw and a standard technique using crossed interfragmentary compression screws. Methodology: The metatarsophalangeal joint was mechanically evaluated in cantilever bending using a servohydraulic testing machine. Differences in stiffness and strength parameters between the two techniques were checked for significance (P<0.05) using a paired t-test. Results: Fixation provided by the intramedullary screw was stiffer and stronger than that from crossed compression screws. Conclusions: The stronger and stiffer intramedullary screw technique offers mechanical advantages over the crossed interfragmentary screw technique.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Weihs, T. P., S. Hong, J. C. Bravman et W. D. Nix. « Mechanical deflection of cantilever microbeams : A new technique for testing the mechanical properties of thin films ». Journal of Materials Research 3, no 5 (octobre 1988) : 931–42. http://dx.doi.org/10.1557/jmr.1988.0931.

Texte intégral
Résumé :
The mechanical deflection of cantilever microbeams is presented as a new technique for testing the mechanical properties of thin films. Single-layer microbeams of Au and SiO2 have been fabricated using conventional silicon micromachining techniques. Typical thickness, width, and length dimensions of the beams are 1.0,20, and 30 μm, respectively. The beams are mechanically deflected by a Nanoindenter, a submicron indentation instrument that continuously monitors load and deflection. Using simple beam theory and the load-deflection data, the Young's moduli and the yield strengths of thin-film materials that comprise the beams are determined. The measured mechanical properties are compared to those obtained by indenting similar thin films supported by their substrate.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Syazwan Ramli, Alif Syamim, Tengku Fadilah Tengku Kamalden, Raihana Sharir, Hazreen Haizi Harith, Marsyita Hanafi, Qais Gasibat et Shamsulariffin Samsudin. « Mechanical Interaction Within Badminton Forehand Shot Technique : A Review Paper ». International Journal of Kinesiology and Sports Science 9, no 3 (31 juillet 2021) : 28. http://dx.doi.org/10.7575/aiac.ijkss.v.9n.3p28.

Texte intégral
Résumé :
Background: The performance outcome model in qualitative technique analysis can determine the mechanical interactions between a performance outcome and the factors that yield such results in sports techniques. Very little attention has been received for badminton forehand shots for such model work, considering the significance of this technical skill as fundamental to play badminton and as important offensive shots. Objective: This study proposes a performance outcome model that associates performance criteria and relevant mechanical variables in the badminton forehand shot technique. Methods: Literature review provided the basis of model development. The Literature research in this paper was conducted in the following databases; PubMed, ScienceDirect, Google Scholar Medline, Pedro, and Cinahl. An additional search (including relevant grey literature) was also done on the internet through ResearchGate. Relevant literature research related to the keywords such as biomechanics of badminton, badminton forehand shot, biomechanical analysis, badminton performance, racquet sports, performance indicators, technique analysis and technique models were included and reviewed. Results: The results managed to present a synthesis of the literature review and provided constructive discussions as a basis to propose a performance outcome model that illustrates mechanical interactions that contribute to badminton forehand and shot technique performance. Conclusions: This model manages to find mechanical relationships and allows for a better grasp of understanding the association between performance criteria and mechanics in the badminton forehand shot technique, which is bases on the kinetic chain principle through the body segmental coordination.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Song Wei, Chen Yu-Hao, Li Xiao-Hui, Zhang Xian-Liang, Wang Jia-Hui et Cai Zhi-Gang. « Mechanical resonance based acoustic spectrographic technique ». Acta Physica Sinica 61, no 22 (2012) : 226202. http://dx.doi.org/10.7498/aps.61.226202.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Lichaa, Hady. « Modified Coronary Pharmaco-Mechanical Thrombectomy Technique ». Journal of the Society for Cardiovascular Angiography & ; Interventions 1, no 2 (mars 2022) : 100028. http://dx.doi.org/10.1016/j.jscai.2022.100028.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Tan, NC, SP Rajapaska, J. Gaynor et S. Nair. « Mechanical endonasal dacryocystorhinostomy--a reproducible technique ». Rhinology journal 47, no 3 (1 septembre 2009) : 310–15. http://dx.doi.org/10.4193/rhin08.150.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Stulak, John M., et Joseph A. Dearani. « Technique of Mechanical Pulmonary Valve Replacement ». Operative Techniques in Thoracic and Cardiovascular Surgery 11, no 3 (2006) : 200–206. http://dx.doi.org/10.1053/j.optechstcvs.2006.05.003.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Utsumi, Ryoji. « Mechanical Technique of an Age Ago ». Journal of the Society of Mechanical Engineers 97, no 913 (1994) : 1009–11. http://dx.doi.org/10.1299/jsmemag.97.913_1009.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Mechanical technique"

1

Moharrami, Noushin. « Extracting reliable mechanical properties using the nanoindentation technique ». Thesis, University of Newcastle upon Tyne, 2014. http://hdl.handle.net/10443/2738.

Texte intégral
Résumé :
Extracting the mechanical properties of thin films and small volumes of bulk materials through the use of nanoindentation is a well established technique but getting good data from all types of test sample is not always easy. Factors such as surface roughness and oxidation, density/porosity of the material, adhesion/detachment of a thin film, pile-up/sink-in, the presence of the substrate, as well as grain size and its distribution have a significant effect on the observed mechanical properties (e.g. Young’s modulus and hardness). Considerable differences between predicted and observed performance can be seen depending on the material tested and how it has been prepared. This thesis concerns developing test protocols to get good nanoindentation data and reliable measurements of the properties for a range of material types (chiefly metals and ceramics). Firstly, this work highlights the effect of crystallographic anisotropy, grain size, shape and orientation on the mechanical response of metallic thin films such as copper used for semiconductor metallisation. Results obtained on highly polished semiconductor materials were compared with those from engineering surfaces with much higher roughness which show increased scatter in results across the complete range of contact scales. Further studies were carried out on hard coatings and bulk materials such as titanium carbide, zirconium nitride and tungsten. The scatter in data obtained at low tests loads is dominated by anisotropy and grain size effects but disappears at higher loads. For soft materials such as copper, the appearance of pile-up was shown to be significant when compared with harder materials which tend to sink-in. Secondly, to assess the effect of creep (time-dependent behaviour) and also grain boundary effects on the measured mechanical properties, soft materials with a range of grain sizes have been examined. Different indentation control cycles (load and displacement control, single indent and multicycling tests) have been investigated to determine what is most suitable with displacement control being essential in most cases. To study the effect of the density/porosity of the sample and its surface roughness on mechanical properties, the work was carried out on porous coatings of tin, copper and copper-tin alloy coatings with a low density. To further understand the behaviour of porous materials and their mechanical properties, finite element analysis was also used to compare the experimental results with a numerical model. The size, shape and location of porosity with respect to the indenter is critical in determining the mechanical properties of a porous material obtained from nanoindentation analysis. Finally, fully processed engineering surfaces were investigated at the component scale to compare with idealised flat plate samples. Titanium-based and cobalt-chrome alloys in the form of femoral heads and stems for replacement hips have been used to assess the effect of in service oxidation on mechanical properties. These have been studied to look at the effects of sample fixturing and support and surface contact in worn and virgin regions of the sample surface. The extent of oxidation and the mechanical properties of the oxide produced are critical in dictating performance.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Jung, Sunghwan. « Growing crack analyses using nodal release technique ». Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/38075.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Shilpiekandula, Vijay 1979. « A laser speckle based position sensing technique ». Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/27131.

Texte intégral
Résumé :
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004.
Includes bibliographical references (p. 129-131).
This thesis presents the design and development of a novel laser-speckle-based position sensing technique. In our prototype implementation, a He-Ne laser beam is directed at the surface of an air-bearing spindle. An imaging system is set up to capture speckle patterns scattered from the spindle surface. These patterns are highly correlated over small angular displacements of the spindle. We use correlation-based image-processing algorithms to measure offsets between the speckle patterns. These offsets are calibrated against the counts of a commercial incremental optical encoder. A custom-built bicell photointerrupter unit is used as a reference sensor for the incremental optical encoder. To test for the control performance of this speckle-based sensor, we have constructed a transmission drive to run the air-bearing spindle. Our speckle-based metrology system is able to run at update rates of 10 Hz with a measured closed loop -3 dB bandwidth of about 2 Hz. Using a real-time processor interfaced with a desktop PC, we have implemented a novel algorithm that interpolates position estimates with respect to two pre-stored global images. We predict that this technique can potentially achieve resolutions of 0.1 [mu]m for translational and 5 [mu]rad for rotational motion. The limitation of our current implementation is the low update rates resulting from the time-intensive nature of correlation-based methods. Possible methods to overcome this limitation are addressed and ideas for follow-on work are presented.
by Vijay Shilpiekandula.
S.M.
Styles APA, Harvard, Vancouver, ISO, etc.
4

TANNERU, VENKAT SUNIL. « A STABILIZATION TECHNIQUE BASED ON MESHFREE METHOD ». University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1130385545.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Smallwood, Gregory John. « A technique for two-colour particle image velocimetry ». Thesis, University of Ottawa (Canada), 1992. http://hdl.handle.net/10393/7599.

Texte intégral
Résumé :
To study the complex flowfields found in combustion, it is often necessary to acquire an instantaneous overall view of the flowfield. One method of achieving this is two-dimensional velocity mapping with particle image velocimetry (PIV). A two-colour PIV experimental apparatus has been developed expressly to meet the demands of combustion and related flowfields. This technique offers advantages over other PIV methods in that the absolute velocity vector direction is known and data processing requirements are reduced. A method for calculating the mean exposure from particles on colour film, based on Mie scattering theory, is developed. A technique optimized for analysis of two-colour PIV images is described. Two-colour PIV is demonstrated in the wake of a noncombusting n-heptane fuelled bluff-body burner, which presented a suitably complex flowfield including counter-rotating recirculation zones and centreline stagnation points. To complement these results, mean velocities obtained with LDA are also presented. This is the first report of spray velocity measurement by PIV.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Elmouelhi, Ahmed (Ahmed M. ). 1979. « Genome scanning : an AFM-based DNA sequencing technique ». Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/34149.

Texte intégral
Résumé :
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2003.
Includes bibliographical references (p. 157-160).
Genome Scanning is a powerful new technique for DNA sequencing. The method presented in this thesis uses an atomic force microscope with a functionalized cantilever tip to sequence single stranded DNA immobilized to a mica surface. The functionalized cantilever tip hybridizes with only one base type (A, C, T, or G) and results in distinct peaks in the AFM-produced image. Genome Scanning has been successful at identifying 40 base strands of synthesized DNA and has been shown to detect a particular base type on 48 kilobase strands of lambda DNA. Currently, Genome Scanning is only accurate to 3-26 bases at a time, however, it can achieve a sequencing speed of 6000 bases/sec. In other words, Genome Scanning can be used to sequence the 3 billion bases of the human genome in 5.78 days.
by Ahmed Elmouelhi.
S.M.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Born, Melanie P. (Melanie Providencia) 1975. « Ice and abrasive particles : an alternative CMP polishing technique ». Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9570.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Barrett, Hannah (Hannah Jane). « Quantifying ballet technique through turn kinematics for injury assessment ». Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/98953.

Texte intégral
Résumé :
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.
Cataloged from PDF version of thesis.
Includes bibliographical references (page 49).
The most common turns in ballet, pirouettes and fouettés require precise movement to match proper technique and prevent injury. Variation in knee angle of a dancer's supporting leg during pirouettes of 1-5 rotations was measured using a goniometer for 12 professional and pre-professional ballet dancers. Plié angle saw no significant difference for different numbers of rotations, but the effect of gender was significant: males pliéd at least 20.3 degrees deeper than females. Average knee angle while turning was less than zero for all pirouettes, highlighting dancers' tendency to bend their supporting knee to correct for instability, which may contribute to knee injuries. Knee angle trajectory closely matched a minimum jerk profile, indicating that dancers encode movements in angle coordinates. Knee angle was compared between pirouettes and fouettés using 2 goniometers and aerial video for 3 advanced amateurs. No difference was found in preparation plié or turn angle between turn types. Axis of rotation remained within 0.221 +/- 0.014 meters of starting position during fouettés. Maximum angular velocity of the head was nearly one and a half times that of the body during fouettés. This kinematic definition of ballet technique creates a framework for movement control of a dancer's lower extremities to prevent injury.
by Hannah Barrett.
S.B.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Janakiraman, Balasubramanian. « Mechanical property measurement by indentation techniques ». Texas A&M University, 2004. http://hdl.handle.net/1969.1/3111.

Texte intégral
Résumé :
The mechanical properties of materials are usually evaluated by performing a tensile or hardness test on the sample. Tensile tests are often time consuming, destructive and need specially prepared specimens. On the other hand, there is no direct theoretical correlation between the hardness number and the mechanical properties of a material although phenomenological relationships do exist. The advantages of indentation techniques are that they are non-destructive, quick, and can be applied to small material samples and localized in fashion. Mechanical properties are typically determined from spherical indentation load-depth curves. This process is again a time consuming one and not suitable for situations where a quick assessment is required such as in the sheet metal rolling industry. In the present study, a novel method of measuring mechanical properties of the material by multiple spherical indentations is developed. A series of indentations are made on the substrate with a spherical indenter with different loads. The diameter of the indentation is related to the load applied to determine the mechanical properties of the material, namely the yield strength and the work hardening parameters. To determine the diameter of the indentation quickly, a fiber optic sensing technique is developed. An incident light beam from a semiconductor laser is coupled back into an optical fiber upon reflection from the metal surface. By measuring the diffused light power reflected from the metal surface, the diameter of the indentation is measured. The spherical indentation technique is difficult for real time mechanical property measurement of sheet metal in a processing line. Problems arise as the strip is traveling at 2,000 to 4,000 ft/min (10,000 to 20,000 mm/sec) in the processing line. As a first step in developing a process that could be implemented in a real time processing line, a preliminary study has been conducted for the prediction of yield strength by laser shock processing.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Kostic, Peter. « New methods for optimization of mechanical ventilation ». Doctoral thesis, Uppsala universitet, Anestesiologi och intensivvård, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-249172.

Texte intégral
Résumé :
Mechanical ventilation saves lives, but it is an intervention fraught with the potential for serious complications. Prevention of these complications has become the focus of research and critical care in the last twenty years. This thesis presents the first use, or the application under new conditions, of three technologies that could contribute to optimization of mechanical ventilation. Optoelectronic plethysmography was used in Papers I and II for continuous assessment of changes in chest wall volume, configuration, and motion in the perioperative period. A forced oscillation technique (FOT) was used in Paper III to evaluate a novel positive end-expiratory pressure (PEEP) optimization strategy. Finally, in Paper IV, FOT in conjunction with an optical sensor based on a self-mixing laser interferometer (LIR) was used to study the oscillatory mechanics of the respiratory system and to measure the chest wall displacement. In Paper I, propofol anesthesia decreased end-expiratory chest wall volume (VeeCW) during induction, with a more pronounced effect on the abdominal compartment than on the rib cage. The main novel findings were an increased relative contribution of the rib cage to ventilation after induction of anesthesia, and the fact that the rib cage initiates post-apneic ventilation. In Paper II, a combination of recruitment maneuvers, PEEP, and reduced fraction of inspired oxygen, was found to preserve lung volume during and after anesthesia. Furthermore, the decrease in VeeCW during emergence from anesthesia, associated with activation of the expiratory muscles, suggested that active expiration may contribute to decreased functional residual capacity, during emergence from anesthesia. In the lavage model of lung injury studied in Paper III, a PEEP optimization strategy based on maximizing oscillatory reactance measured by FOT resulted in improved lung mechanics, increased oxygenation, and reduced histopathologic evidence of ventilator-induced lung injury. Paper IV showed that it is possible to apply both FOT and LIR simultaneously in various conditions ranging from awake quiet breathing to general anesthesia with controlled mechanical ventilation. In the case of LIR, an impedance map representing different regions of the chest wall showed reproducible changes during the different stages that suggested a high sensitivity of the LIR-based measurements.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Mechanical technique"

1

G, Keith Theodore, United States. Army Aviation Research and Technology Activity. et United States. National Aeronautics and Space Administration., dir. Applications of an exponential finite difference technique. [Washington, DC] : National Aeronautics and Space Administration, 1988.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Mechanical design. 2e éd. Oxford : Burlington, MA, 2004.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ashby, M. F. Materials selection in mechanical design. Oxford : Pergamon Press, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Materials selection in mechanical design. 3e éd. Amsterdam : Elsevier Butterworth-Heinemann, 2005.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Joanne, Stryker, dir. Drawing : Structure and vision. Upper Saddle River, N.J : Pearson Prentice Hall, 2009.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Bethune, James D. Essentials of drafting. 2e éd. Englewood Cliffs, N.J : Prentice-Hall, 1987.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Alain, Mercier. Le portefeuille de Vaucanson : Chefs-d'oeuvre du déssin technique. Paris : Musée national des techniques : Conservatoire national des arts et métiers, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Thorne, Robert M. Intentional site burial : A technique to protect against natural or mechanical loss. [Washington, DC] : U.S. Dept. of the Interior, National Park Service, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

United States. National Park Service. Archeological Assistance Division, dir. Intentional site burial : A technique to protect against natural or mechanical loss. [Washington, D.C.] : U.S. Dept. of the Interior, National Park Service, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Lahti, Tapio. Measurement of reflection and impedance in a beam by the structural intensity technique. Espoo : Technical Research Centre of Finland, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Mechanical technique"

1

Bhalla, S., et C. K. Soh. « Electro-Mechanical Impedance Technique ». Dans Advanced Topics in Science and Technology in China, 17–51. Berlin, Heidelberg : Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24463-6_2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Scott-Conner, Carol E. H. « Mechanical Basics of Operative Technique ». Dans Chassin’s Operative Strategy in General Surgery, 5–18. New York, NY : Springer New York, 2002. http://dx.doi.org/10.1007/978-0-387-22532-6_2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Scott-Conner, Carol E. H., et Jameson L. Chassin. « Mechanical Basics of Operative Technique ». Dans Chassin's Operative Strategy in General Surgery, 5–18. New York, NY : Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1393-6_2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Spanos, Constantine P., et Carol E. H. Scott-Conner. « Mechanical Basics of Operative Technique ». Dans Chassin's Operative Strategy in General Surgery, 7–13. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-81415-1_2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kühn, K. D., R. Specht, W. Ege et H. J. Kock. « Mechanical Properties of Bone Cements ». Dans Bone Cements and Cementing Technique, 27–41. Berlin, Heidelberg : Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59478-6_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Specht, R., K. D. Kühn, W. Ege et H. J. Kock. « Mechanical Testing of Palamed® ». Dans Bone Cements and Cementing Technique, 43–49. Berlin, Heidelberg : Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59478-6_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Chakroun, Nadia, Aymen Tekaya, Hedi Belhadjsalah et Tarek Benameur. « Mechanical Characterization of Coating Materials Based on Nanoindentation Technique ». Dans Advances in Mechanical Engineering and Mechanics, 47–53. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-19781-0_6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Brossa, F., et E. Lang. « PLASMA SPRAYING — A Versatile Coating Technique ». Dans Eurocourses : Mechanical and Materials Science, 199–234. Dordrecht : Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-017-0631-5_9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Nicholson, Kristen. « Kinematics and Kinetics : Technique and Mechanical Models ». Dans Cerebral Palsy, 1–16. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-50592-3_98-1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Nicholson, Kristen. « Kinematics and Kinetics : Technique and Mechanical Models ». Dans Cerebral Palsy, 1339–53. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-74558-9_98.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Mechanical technique"

1

Lee, Kwan H., Terry G. McRae, Joachim Knittel et Warwick P. Bowen. « Opto-electro-mechanical based locking technique ». Dans LEOS 2009 -22nd Annuall Meeting of the IEEE Lasers and Electro-Optics Society (LEO). IEEE, 2009. http://dx.doi.org/10.1109/leos.2009.5343161.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Czyzewicz, Robin, et Stephen Bennison. « Solar module mechanical measurement and mechanical modeling technique for rapid parametric design ». Dans 2011 37th IEEE Photovoltaic Specialists Conference (PVSC). IEEE, 2011. http://dx.doi.org/10.1109/pvsc.2011.6186404.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Somasundaram, K., P. Parthipan, R. Ramesh et S. Rajes Kanan. « SB20 technique used to secure the data ». Dans INDUSTRIAL, MECHANICAL AND ELECTRICAL ENGINEERING. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0110864.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Umapathy, K. « Wireless technique based vehicle speed control system ». Dans INDUSTRIAL, MECHANICAL AND ELECTRICAL ENGINEERING. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0109726.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Zhang, Xianglei, Kai Wang et Yanan Zhao. « Electrical vehicle crash test technique research ». Dans Mechanical Engineering and Information Technology (EMEIT). IEEE, 2011. http://dx.doi.org/10.1109/emeit.2011.6023931.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Silveira Leal, José Eduardo, Teófilo Jacob Freitas e Souza, Sinésio Franco, Vera Lúcia Donizeti de Sousa FRanco et Rosenda Arencibia. « A CONTRIBUTION TO ELECTROCHEMICAL NANOINDENTATION TECHNIQUE ». Dans 25th International Congress of Mechanical Engineering. ABCM, 2019. http://dx.doi.org/10.26678/abcm.cobem2019.cob2019-1419.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Mohammadi, Ali, Bhaskar Choubey, Mehmet R. Yuce et Nemai C. Karmakar. « An integrated magnetic programming technique for mechanical microresonators ». Dans 2017 IEEE 12th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE, 2017. http://dx.doi.org/10.1109/nems.2017.8017069.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Raeyoung Kim et Yoonkey Nam. « Novel platinum black electroplating technique improving mechanical stability ». Dans 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). IEEE, 2013. http://dx.doi.org/10.1109/embc.2013.6609468.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Mortaio, Luiz A., et Luis A. M. Riascos. « A low cost retrofitting technique for mechanical presses ». Dans 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE). IEEE, 2015. http://dx.doi.org/10.1109/isie.2015.7281540.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Suh, Chii-Der S., et Andrew K. Chan. « Wavelet-based technique for detection of mechanical chaos ». Dans AeroSense 2000, sous la direction de Harold H. Szu, Martin Vetterli, William J. Campbell et James R. Buss. SPIE, 2000. http://dx.doi.org/10.1117/12.381710.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Mechanical technique"

1

Kropka, Jamie Michael, Mark E. Stavig, Gabe Kenneth Arechederra et John D. McCoy. Predictive Modeling of Polymer Mechanical Behavior Coupled to Chemical Change/ Technique Development for Measuring Polymer Physical Aging. Office of Scientific and Technical Information (OSTI), septembre 2017. http://dx.doi.org/10.2172/1397142.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Kaul, Anupama B., Tomasz Klosowiak et Joshua Liu. A Static Technique for the Electro-Mechanical Characterization of Organic MEMS Devices for RF and Microwave Applications. Fort Belvoir, VA : Defense Technical Information Center, mars 2002. http://dx.doi.org/10.21236/ada405902.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Enos, David George, et Steven Howard Goods. Development of a novel technique to assess the vulnerability of micro-mechanical system components to environmentally assisted cracking. Office of Scientific and Technical Information (OSTI), novembre 2006. http://dx.doi.org/10.2172/966589.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Baillieul, John. Advanced Programming and Control Techniques for Complex Mechanical Systems. Fort Belvoir, VA : Defense Technical Information Center, octobre 1987. http://dx.doi.org/10.21236/ada190238.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Banaszak, David. Versatile Measurement Techniques to Validate Analytical Structural Mechanical Models. Fort Belvoir, VA : Defense Technical Information Center, mars 2007. http://dx.doi.org/10.21236/ada469782.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Tsanova-Stamatova, Mariela, Neshka Manchorova-Veleva et Tsvetanka Babeva. Influence of Mechanical and Chemical Modification Techniques on Zirconia Surface Roughness. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, novembre 2020. http://dx.doi.org/10.7546/crabs.2020.11.04.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Lambert, Byron J., et Joseph Silverman. Evaluation of Radiation Techniques for Improving the Mechanical Properties of Tank Pads. Fort Belvoir, VA : Defense Technical Information Center, octobre 1986. http://dx.doi.org/10.21236/ada174455.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Groom, Leslie H., et Audrey G. Zink. Techniques in Experimental Mechanics Applicable to Forest Products Research. New Orleans, LA : U.S. Department of Agriculture, Forest Service, Southern Forest Experiment Station, 1994. http://dx.doi.org/10.2737/so-gtr-125.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Riveros, Guillermo, Felipe Acosta, Reena Patel et Wayne Hodo. Computational mechanics of the paddlefish rostrum. Engineer Research and Development Center (U.S.), septembre 2021. http://dx.doi.org/10.21079/11681/41860.

Texte intégral
Résumé :
Purpose – The rostrum of a paddlefish provides hydrodynamic stability during feeding process in addition to detect the food using receptors that are randomly distributed in the rostrum. The exterior tissue of the rostrum covers the cartilage that surrounds the bones forming interlocking star shaped bones. Design/methodology/approach – The aim of this work is to assess the mechanical behavior of four finite element models varying the type of formulation as follows: linear-reduced integration, linear-full integration, quadratic-reduced integration and quadratic-full integration. Also presented is the load transfer mechanisms of the bone structure of the rostrum. Findings – Conclusions are based on comparison among the four models. There is no significant difference between integration orders for similar type of elements. Quadratic-reduced integration formulation resulted in lower structural stiffness compared with linear formulation as seen by higher displacements and stresses than using linearly formulated elements. It is concluded that second-order elements with reduced integration and can model accurately stress concentrations and distributions without over stiffening their general response. Originality/value – The use of advanced computational mechanics techniques to analyze the complex geometry and components of the paddlefish rostrum provides a viable avenue to gain fundamental understanding of the proper finite element formulation needed to successfully obtain the system behavior and hot spot locations.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Hunston, Donald L., et George W. Bullman. Relationships between mechanical properties and performance of inks as the basis for quality control techniques :. Gaithersburg, MD : National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3180.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Mechanical technique » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie