Littérature scientifique sur le sujet « Measurement »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Measurement ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Measurement"
Oleniacz, Grzegorz, Izabela Skrzypczak et Tomasz Świętoń. « ACCURACY OF RTN MEASUREMENT IN VARIOUS MEASUREMENT CONDITIONS ». Zeszyty Naukowe Uniwersytetu Zielonogórskiego / Inżynieria Środowiska 166, no 46 (3 juillet 2017) : 16–24. http://dx.doi.org/10.5604/01.3001.0010.6029.
Texte intégralŁętocha, Aneta, Tatiana Miller et Janusz Kalisz. « Influence of measurement areas selection on roughness parameters in burnished surfaces measurements ». Mechanik, no 5-6 (mai 2016) : 552–53. http://dx.doi.org/10.17814/mechanik.2016.5-6.82.
Texte intégralOberrecht, Stephen P., James G. Kohl et Duane L. Simonson. « OS7-14 Dynamic Complex Shear Modulus Measurements of Silicone Elastomers Containing Coated Clay Particles Using an Experimental Linear Rheometer(Stress and strain measurement IV,OS7 Stress and strain measurement,MEASUREMENT METHODS) ». Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015) : 105. http://dx.doi.org/10.1299/jsmeatem.2015.14.105.
Texte intégralBuchholz, F. I., W. Kessel et F. Melchert. « Noise power measurements and measurement uncertainties ». IEEE Transactions on Instrumentation and Measurement 41, no 4 (1992) : 476–81. http://dx.doi.org/10.1109/19.155910.
Texte intégralJudish, R. M. « Quality control of measurements—Measurement assurance ». Proceedings of the IEEE 74, no 1 (1986) : 23–25. http://dx.doi.org/10.1109/proc.1986.13394.
Texte intégralParekh, S. V. « The measurements column (antenna gain measurement) ». IEEE Antennas and Propagation Magazine 32, no 2 (avril 1990) : 41–44. http://dx.doi.org/10.1109/74.80503.
Texte intégralKIDO, Ryo, et Kozo TAGUCHI. « Cellular Temperature Measurement by Dielectrophoretic Impedance Measurement Method ». Journal of the Japan Society of Applied Electromagnetics and Mechanics 23, no 3 (2015) : 601–5. http://dx.doi.org/10.14243/jsaem.23.601.
Texte intégralKroc, Edward. « Generalized measurement error : Intrinsic and incidental measurement error ». PLOS ONE 18, no 6 (29 juin 2023) : e0286680. http://dx.doi.org/10.1371/journal.pone.0286680.
Texte intégralGowda S.L., Girish, Jayanth Kumar H.V., Anand Kuriyan Mathew, Veeresh G.S. et Cholenahally Nanjappa Manjunath. « Intraoperative Flow Measurement of Saphenous Vein Graft : Transit Time Flowmetry Measurement Versus Free Flow Measurement ». Journal of Cardiovascular Medicine and Surgery 5, no 1 (2019) : 11–14. http://dx.doi.org/10.21088/jcms.2454.7123.5119.2.
Texte intégralSu, Fei, et Xiaoxu Pan. « OS7-2 Stress measurement for ferromagnetic specimen using magnetoacoustic emission(Stress and strain measurement I,OS7 Stress and strain measurement,MEASUREMENT METHODS) ». Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015) : 93. http://dx.doi.org/10.1299/jsmeatem.2015.14.93.
Texte intégralThèses sur le sujet "Measurement"
Brougham, Thomas. « joint measurements on qubits and measurement correlation ». Thesis, University of Strathclyde, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.487858.
Texte intégralPretorius, Shaun. « Development of flexible automotive measurement adaptors for the PQ25 VWSA platform ». Thesis, Nelson Mandela Metropolitan University, 2009. http://hdl.handle.net/10948/1632.
Texte intégralSturm, Anke. « Performance Measurement und Environmental Performance Measurement ». Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2000. http://nbn-resolving.de/urn:nbn:de:swb:14-994768126734-55001.
Texte intégralBartsch, Christian [Verfasser]. « Flow-Adaptive Measurement Sequence for Pneumatic Probe Measurements / Christian Bartsch ». München : Verlag Dr. Hut, 2017. http://d-nb.info/1149579595/34.
Texte intégralYang, Xuan. « Distributed state estimation with the measurements of Phasor Measurement Units ». Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4479/.
Texte intégralSnethlage, Tim. « Balanciertes Performance measurement : Grundzüge eines an nachhaltigem Unternehmenserfolg orientierten Performance measurements / ». Aachen : Shaker, 2004. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=010671315&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Texte intégralGaete-Martinez, Victor. « Optical Measurement of Strang Geometry and Orientation and Their Influence on Oriented Strand Composite Formation Quality ». Fogler Library, University of Maine, 2009. http://www.library.umaine.edu/theses/theses.asp?highlight=1&Cmd=abstract&ID=FTY2009-004.
Texte intégralFagelson, Marc A. « Tinnitus Measurement ». Digital Commons @ East Tennessee State University, 2005. https://dc.etsu.edu/etsu-works/1671.
Texte intégralYang, Kimberly. « Correlating IVC Measurements with Intravascular Volume Changes at Three Distinct Measurement Sites ». Thesis, The University of Arizona, 2014. http://hdl.handle.net/10150/315932.
Texte intégralBedside ultrasound of the inferior vena cava (IVC) has grown to be an important tool in the assessment and management of critically ill patients. This study endeavors to examine which location along the IVC is most highly correlated with changes in intravascular volume status: (1) the diaphragmatic juncture (DJ) (2) two centimeters caudal to the hepatic vein juncture (2HVJ) or (3) left renal vein juncture (LRVJ). Data was collected in this prospective observational study on patients in the emergency department who were at least 16 years of age, being treated with intravenous fluids (IVF). Measurements of the IVC were recorded at each site during standard inspiratory and expiratory cycles, and again with the patient actively sniffing to decrease intrapleural pressures. IVF was then administered per the patient’s predetermined treatment, and the same six measurements were repeated after completion of fluid bolus. The difference in caval index (dCI) was calculated for all six data sets and correlated with the mL/kg of IVF administered. There was a statistically significant correlation between mL/kg of IVFs administered and dCI at all three sites (DJ: r = 0.354, p value = 0.0002; 2HVJ: r = 0.334, p value = 0.0003; LRVJ: r = 0.192, p value = 0.03). The greatest correlation between amount of fluids administered and dCI was observed along the IVC at the site 2 cm caudal to the juncture of the hepatic veins (2HVJ). This site is also where the largest change in diameter can be appreciated on ultrasound during intravascular volume resuscitation. Our data also suggests that every mL/kg of IVFs administered should change the dCI by 0.86-1.00%. This anticipated change in IVC diameter can be used to gauge a patient’s response to intravascular volume repletion.
Lee, Hyun. « Reliability evaluation of the BIFMA Chair Measurement Device ». Thesis, Virginia Tech, 1996. http://hdl.handle.net/10919/44963.
Texte intégralIn the last decade, most offices have been equipped with computers, and most office workers spend much of their time sitting in chairs. And recently, as many office workers complain of back pains, the importance ofproper sitting and of chair designs that provide comfortable and suitable sitting posture has become recognized widely.
One organization involved in the design of chairs is the Human Factors and Ergonomics Society (HFES) and its ANSIIHFES 100 committee. This committee has established the ANS/IHFES 100 standard for various types of furniture used at computer workstations, including chairs, desks, and tables. This committee also has designed the Chair Measurement Device (CMD) for specific assessments of seat height, seat depth, seat width, backrest height, backrest width, lumbar support, seat to back included angle, seat pan angle, armrest height, and armrest clearance, for the purpose of developing chairs in connection with other related furniture, such as computer desks. The CMD has been developed through the Business and Institutional Furniture Manufacturer's Association (BIFMA).
The purpose of this study was to evaluate the reliability of the CMD, for future use in evaluating chair design. Eight participants made specific measurements of three chairs over three measurement sessions. Six measurements were taken from each chair: lumbar support height, seat height, seat depth, backrest height, seat pan angle, and seat to back included angle. This experiment produced 2,160 data points, and standard deviation and confidence interval analysis was used to evaluate the inter-evaluator reliability (ie., consistency across the different evaluators) and the intra-evaluator reliability (i.e., consistency within an evaluator).
All standard deviations and 99% confidence intervals of the measurements were very small, implying that the measurements using the CMD were reliable across the evaluators, as well as within evaluators. The results also show that the procedure established for measurements was adequate for ANSIIHFES 100 compliance evaluations.
Master of Science
Livres sur le sujet "Measurement"
Burnside, C. D. Electromagnetic distance measurement. 3e éd. Oxford : BSP Professional Books, 1991.
Trouver le texte intégralNarens, Louis. Abstract measurement theory. Cambridge, Mass : MIT Press, 1985.
Trouver le texte intégral1922-, Suppes Patrick, dir. Foundations of measurement. Mineola, N.Y : Dover, 2007.
Trouver le texte intégralChesher, Andrew. Wefare measurement and measurement error. Bristol : University of Bristol, Department of Economics, 1999.
Trouver le texte intégralBartholomew, David. Measurement. 1 Oliver's Yard, 55 City Road, London EC1Y 1SP United Kingdom : SAGE Publications Ltd, 2006. http://dx.doi.org/10.4135/9781446262481.
Texte intégralKelly, Brendan. Measurement. Toronto, ON : Ontario Ministry of Education and Training, 1999.
Trouver le texte intégralCorballis, Tim. Measurement. Wellington [N.Z.] : Victoria University Press, 2002.
Trouver le texte intégralCunningham, Kevin. Measurement. Greensboro, North Carolina : Morgan Reynolds Publsihing, 2014.
Trouver le texte intégral(Firm), ETA/Cuisenaire, dir. Measurement. Vernon Hills, IL : ETA/Cuisenaire, 2003.
Trouver le texte intégralBouch, Debb. Measurement. London : National Research and Development Centre for Adult Literacy and Numeracy, 2007.
Trouver le texte intégralChapitres de livres sur le sujet "Measurement"
Venkateshan, S. P. « Measurements and Errors in Measurement ». Dans Mechanical Measurements, 3–45. Chichester, UK : John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781119115571.ch1.
Texte intégralVenkateshan, S. P. « Measurements and Errors in Measurement ». Dans Mechanical Measurements, 3–48. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-73620-0_1.
Texte intégralSchönfelder, Gert. « Measurement Errors, Measurement Accuracy and Measurement Parameters ». Dans Sensors in Science and Technology, 793–802. Wiesbaden : Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-34920-2_18.
Texte intégralDalati, Serene. « Measurement and Measurement Scales ». Dans Progress in IS, 79–96. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74173-4_5.
Texte intégralLeat, Diana. « Missing Measurement, Misunderstanding Measurement ? » Dans Philanthropic Foundations, Public Good and Public Policy, 107–20. London : Palgrave Macmillan UK, 2016. http://dx.doi.org/10.1057/978-1-137-48289-1_9.
Texte intégralWohlin, Claes, Per Runeson, Martin Höst, Magnus C. Ohlsson, Björn Regnell et Anders Wesslén. « Measurement ». Dans Experimentation in Software Engineering, 37–43. Berlin, Heidelberg : Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29044-2_3.
Texte intégralWellner, Marcel. « Measurement ». Dans Elements of Physics, 1–12. Boston, MA : Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-3860-8_1.
Texte intégralCzichos, Horst. « Measurement ». Dans Measurement, Testing and Sensor Technology, 3–23. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76385-9_1.
Texte intégralSavva, Michalakis. « Measurement ». Dans Pharmaceutical Calculations, 1–18. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20335-1_1.
Texte intégralPenketh, F. E. « Measurement ». Dans Work Out Numeracy, 58–63. London : Macmillan Education UK, 1987. http://dx.doi.org/10.1007/978-1-349-08605-4_5.
Texte intégralActes de conférences sur le sujet "Measurement"
« Electromagnetic measurements. Microwave measurement ». Dans 2017 Radiation and Scattering of Electromagnetic Waves (RSEMW). IEEE, 2017. http://dx.doi.org/10.1109/rsemw.2017.8103683.
Texte intégral« Measurement in biomedicine [breaker page] ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983565.
Texte intégral« Measurement of physical quantities [breaker page] ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983534.
Texte intégral« Theoretical problems of measurement [breaker page] ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983522.
Texte intégralMatousek, D., O. Subrt et J. Hospodka. « Fibonacci charge pump design, test and measurement ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983554.
Texte intégralRublik, F., et V. Witkovsky. « A goodness-of-fit test for uniform distribution with unknown limits ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983529.
Texte intégralRost'akova, Z., et R. Rosipal. « Importance of the time alignment of the sleep probabilistic curves ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983528.
Texte intégral« [Front cover] ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983515.
Texte intégral« [Title page] ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983516.
Texte intégral« [Copyright notice] ». Dans 2017 11th International Conference on Measurement. IEEE, 2017. http://dx.doi.org/10.23919/measurement.2017.7983517.
Texte intégralRapports d'organisations sur le sujet "Measurement"
Brennan, James. PR-50-104-R01 LNG Flow Measurement. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), janvier 1985. http://dx.doi.org/10.55274/r0011728.
Texte intégralWolf, Zachary. Temperature Measurements in the Magnetic Measurement Facility. Office of Scientific and Technical Information (OSTI), décembre 2010. http://dx.doi.org/10.2172/1000389.
Texte intégralGeorge, Hawley et Owston. PR-015-09603-R01 LNG Measurement Uncertainty Analysis. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), septembre 2010. http://dx.doi.org/10.55274/r0010699.
Texte intégralChoquette, Gary. PR000-22605-R01 Design Guideline for Retrofittable Inline Flow Measurement. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), février 2024. http://dx.doi.org/10.55274/r0000054.
Texte intégralCrocker, Malcolm, P. Raju et S. Yang. NPR199201 Standard Sound Power Level Specification and Measurement Procedure. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), octobre 1992. http://dx.doi.org/10.55274/r0011640.
Texte intégralWeier, Dennis R., et Allan F. Pardini. Evaluation of UT Wall Thickness Measurements and Measurement Methodology. Office of Scientific and Technical Information (OSTI), octobre 2007. http://dx.doi.org/10.2172/1035013.
Texte intégralCIE. CIE 250:2022 Spectroradiometric Measurement of Optical Radiation Sources. International Commission on Illumination, juin 2022. http://dx.doi.org/10.25039/tr.250.2022.
Texte intégralCavatorta, Elisa, et Orazio Attanasio. Innovations in measurement and the evaluation of human behaviour. Centre for Excellence and Development Impact and Learning (CEDIL), novembre 2022. http://dx.doi.org/10.51744/cmb9.
Texte intégralAruoba, S. Boraǧan, Francis Diebold, Jeremy Nalewaik, Frank Schorfheide et Dongho Song. Improving GDP Measurement : A Measurement-Error Perspective. Cambridge, MA : National Bureau of Economic Research, avril 2013. http://dx.doi.org/10.3386/w18954.
Texte intégralMuckenthaler, F. J., R. R. Spencer, H. T. Hunter, J. L. Hull et A. Shono. Measurements for the JASPER Program Axial Shield Re-measurement Experiment. Office of Scientific and Technical Information (OSTI), mars 1993. http://dx.doi.org/10.2172/432822.
Texte intégral