Littérature scientifique sur le sujet « Material Flow Analysi »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Material Flow Analysi ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Material Flow Analysi"
Simbolon, Ika Pratiwi, Imas Nurani Islami et Vita Elisa Fitriana. « Pendalaman Materi : Laporan Keuangan sebagai Dasar Analisis Investasi Saham ». ACADEMICS IN ACTION Journal of Community Empowerment 1, no 2 (15 janvier 2020) : 109. http://dx.doi.org/10.33021/aia.v1i2.917.
Texte intégralAllen, Frederick W., Priscilla A. Halloran, Angela H. Leith et M. Clare Lindsay. « Using Material Flow Analysis for Sustainable Materials Management ». Journal of Industrial Ecology 13, no 5 (octobre 2009) : 662–65. http://dx.doi.org/10.1111/j.1530-9290.2009.00168.x.
Texte intégralKMIECIK, Mariusz, et Aleksandra WIERZBICKA. « Analysis of material flow in a distribution network from the perspective of selected logistics operator ». Scientific Papers of Silesian University of Technology. Organization and Management Series 2020, no 146 (2020) : 207–17. http://dx.doi.org/10.29119/1641-3466.2020.146.16.
Texte intégralKang, Suk-Hoon, Jae-Hyung Cho, Chang-Gil Lee, Sung-Joon Kim, Kyu-Hwan Oh et Heung-Nam Han. « Microtexture and Material Flow Analysis on Friction Stir Welded Materials ». Journal of the Korean Welding and Joining Society 28, no 5 (31 octobre 2010) : 20–27. http://dx.doi.org/10.5781/kwjs.2010.28.5.020.
Texte intégralBožek, Pavol, et Peter Pokorný. « Analysis and Evaluation of Differences Dimensional Products of Production System ». Applied Mechanics and Materials 611 (août 2014) : 339–45. http://dx.doi.org/10.4028/www.scientific.net/amm.611.339.
Texte intégralÖzdoğru, Ünsal, et Tayfur Altiok. « Continuous material flow systems : analysis of marine ports handling bulk materials ». Annals of Operations Research 231, no 1 (6 septembre 2012) : 79–104. http://dx.doi.org/10.1007/s10479-012-1201-7.
Texte intégraldos Muchangos, Leticia Sarmento, Akihiro Tokai et Atsuko Hanashima. « Data uncertainties in material flow analysis : Municipal solid waste management system in Maputo City, Mozambique ». Waste Management & ; Research : The Journal for a Sustainable Circular Economy 35, no 1 (11 novembre 2016) : 120–25. http://dx.doi.org/10.1177/0734242x16675685.
Texte intégralMatasci, Cecilia, Marcel Gauch et Heinz Boeni. « HOW TO INCREASE CIRCULARITY IN THE SWISS ECONOMY ? » Detritus, no 14 (26 février 2021) : 25–31. http://dx.doi.org/10.31025/2611-4135/2021.14057.
Texte intégralLee, l.-seuk. « Life Cycle Analysis of Material Flow and the Construction of National Integrated Resources Management System on Metal Resources ». Journal of the Korean Society of Mineral and Energy Resources Engineers 49, no 6 (2012) : 865. http://dx.doi.org/10.12972/ksmer.2012.49.6.865.
Texte intégralKim, Man-Il, et Jae-Hwan Kwak. « Assessment of Building Vulnerability with Varying Distances from Outlet Considering Impact Force of Debris Flow and Building Resistance ». Water 12, no 7 (16 juillet 2020) : 2021. http://dx.doi.org/10.3390/w12072021.
Texte intégralThèses sur le sujet "Material Flow Analysi"
Stridh, Madeleine. « Material flow : An analysis of a production area for improved material flow ». Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80193.
Texte intégralHelber, Stefan. « Performance analysis of flow lines with non-linear flow of material / ». Berlin : Springer, 1999. http://opac.nebis.ch/cgi-bin/showAbstract.pl?u20=3540659544.
Texte intégralKopec, Grant Michael. « Examining natural resource futures with material flow analysis ». Thesis, University of Cambridge, 2015. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.709409.
Texte intégralAmneklev, Jennie. « Diffuse emissions from goods - influences on some societal end products ». Doctoral thesis, Linnéuniversitetet, Institutionen för biologi och miljö (BOM), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-46805.
Texte intégralLow, Man-Shi. « Material flow analysis of concrete in the United States ». Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/33030.
Texte intégralMIT Rotch Library copy is in leaves.
Also issued in leaves.
Includes bibliographical references (p. 155-164).
Concrete is the second most consumed material in the world after water. Due to the sheer mass of concrete consumed annually and its associated resource and environmental impacts, improving the materials management of concrete consumption is a critical problem in the United States. It is increasingly evident that the society lacks knowledge of the collective material composition of the urban environment-of how we produce, consume and dispose of concrete. This thesis argues that the lack of informational linkages is driving the individual approaches of the construction industry, policy makers, environmental agencies and waste management industry, which results in the current segregated and government-subsidized material management. In order to identify opportunities for more effective materials management, this thesis performs the first comprehensive Material Flow Analysis for concrete in the United States for the year of 1996 to identify opportunities for more effective materials management. The dominant concrete products and the end-use categories in the United States are identified. The associated water, energy and fuel consumption and emissions produced are also incorporated. Five lifecycle stages are covered: (i) extraction of raw materials, (ii) cement manufacturing, (iii) production, (iv) use and (v) waste management of concrete. Two untapped material management opportunities are identified: minimizing water consumption during the extraction stage and the off-site production stage.
(cont.) In addition, three key observations are made: (i) the energy efficiency of the cement industry in the United States is close to saturation, (ii) product choice and concrete design are dominant factors for a more responsible materials consumption approach, and (iii) demand-side management is recommended as a more optimal approach than recycling in dealing with the current construction trends in the United States.
by Man-Shi Low.
S.M.
Danius, Lena. « Data uncertinties in material flow analysis.Local case study and literature survey ». Licentiate thesis, KTH, Chemical Engineering and Technology, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1502.
Texte intégralThe aim of this thesis is to discuss and analyse the influenceof data uncertainties with regard to the reliability of materialflow analysis (MFA) studies. MFA, as a part of environmentalsystems analysis, is a method belonging to the research field ofindustrial ecology and more specifically industrial metabolism.As such, the method strives at giving a holistic view of thecomplex world we live in, in order to reduce negativeenvironmental impact. Among other things, MFA studies have beenproposed to be useful for priority setting and following up inmunicipalities.
Serving as a starting point is a local case study of flows ofnitrogen in a Swedish municipality, Västerås. The casestudy has been performed using the ComBoxmodel. The years studiedare 1995 and 1998. The main sectors in society emitting nitrogento water were identified as the agricultural and householdsectors. The dominating sectors emitting nitrogen to air wereidentified as the agricultural, transport and infrastructuresectors.
As a basis for discussing data uncertainties qualitatively andquantitatively a literature survey was performed. 50 articles andbooks were identified as in some way or another dealing with datauncertainties in MFA. The literature survey showed that theuncertainties for results from a MFA study might vary between±30 % and a factor 10 depending on what kind of parameter isinvestigated. Only one method was found that dealt with datauncertainties in MFA in a complete way; a model developed byHedbrant and Sörme (HS model).
When applying the HS model to the case study of nitrogen flowsin Västerås, it was found that when uncertaintyintervals were calculated the possible conclusions changed. Ofthe two pair of flows compared in relation to priority setting,none of the earlier conclusions remained. Of the three flowsanalysed in relation to following up, only the flow from onepoint source supported the same conclusion when uncertainty wasconsidered.
In all, it is concluded that data uncertainties in MFAanalysis are an important aspect and that further research isneeded in order to improve input data quality estimations andframeworks for determining, calculating and presenting data, datauncertainties and results from MFA studies. However, theunderlying reality remains, e.g. that management of materialflows are important for understanding and reducing the negativeenvironmental impact. Thus, MFA is one useful tool in thiswork.
Keywords:data uncertainties, sensitivity analysis,Material flow analysis, MFA, method to determine datauncertainties, case study, ComBox model, nitrogenflows.
Schleyer, Marc. « Discrete time analysis of batch processes in material flow systems ». Karlsruhe : Univ.-Verl. Karlsruhe, 2007. http://www.uvka.de/univerlag/volltexte/2007/243/.
Texte intégralYaramadi, Dehnavi Pouya. « Global cycle of gallium production, use and potential recycling ». Thesis, KTH, Mark- och vattenteknik (flyttat 20130630), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-171838.
Texte intégralAbou-Zeida, Essam Mahrous. « Flow Characteristics and Stress Analysis of Bulk Materials in Silos / ». The Ohio State University, 1996. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487931993466818.
Texte intégralMaruchi, Andréa Keller. « Fracionamento de fósforo em plantas empregando diferentes procedimentos de preparo de amostras e sistemas de análise em fluxo monossegmentado ». Universidade de São Paulo, 2005. http://www.teses.usp.br/teses/disponiveis/46/46133/tde-16112006-110659/.
Texte intégralIn this work, different sample treatment procedures were evaluated for fractionation of phosphorous in plant material (determination of organic and inorganic, soluble and insoluble fractions). The evaluated procedures aimed the conversion of different fractions in ortophosphate, minimizing time, reagent amounts and waste generation. It was developed a monosegmented flow system using discrete commutators (solenoid valves) to control the insertion of air bubbles, samples and reagents. For the determination of phosphate, it was used the reaction of molibdenium blue formation, using ammonium molibdate and ascorbic acid as reagents. Linear response was observed within 0.50 and 25.0 mg L-1 P, described by the equation A = 0.0402 + 0.0377C (mg L-1 P), r = 0.999 for solutions prepared in water. The sensitivity decreased about 8 and 22 % for reference solutions in 0.35 mol L-1 and 0.70 mol L-1 HNO3, respectively. Detection limit of 0.024 mg L-1 P (99.7% confidence level), coefficient of variation of 3.5% (n = 10) and sampling rate of 38 measurements per hour were estimated. The reagent consumption was 5.0 mg ascorbic acid and 0.60 mg ammonium molibdate per determination. The flow system was less prone to matrix effects and perturbations by Schlieren effect, both caused by variations of acidity in the samples. The system was applied to fractionation of phosphorous in a plant used as green manure (Crotalaria juncea). Several procedures for phosphorous extraction were evaluated, such as mechanic agitation using water or diluted nitric acid as extractor (extraction of soluble phosphorous), photodegradation of organic soluble phosphorous in acid medium and acid digestion assisted by microwaves (determination of total phosphorous and organic phosphorous). For determination of total phosphorous, procedures using different mass of plant material, different concentrations of HNO3 concentrated and addiction of H2O2 as auxiliary oxidant were evaluated. Good results were obtained using 100 mg of plant material and 500 µL HNO3, not being necessary the addiction of H
Livres sur le sujet "Material Flow Analysi"
National Research Council (U.S.). Committee on Material Flows Accounting of Natural Resources, Products, and Residuals. et National Academy of Sciences (U.S.), dir. Materials count : The case for material flows analysis. Washington, D.C : National Academies Press, 2004.
Trouver le texte intégralBrunner, Paul H., et Helmut Rechberger. Handbook of Material Flow Analysis. Boca Raton : Taylor & Francis, CRC Press, 2017. | Revised : CRC Press, 2016. http://dx.doi.org/10.1201/9781315313450.
Texte intégralHelmut, Rechberger, dir. Practical handbook of material flow analysis. Boca Raton, Fla : Lewis, 2004.
Trouver le texte intégralHelber, Stefan. Performance Analysis of Flow Lines with Non-Linear Flow of Material. Berlin, Heidelberg : Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-95863-2.
Texte intégralBordbar, Mohammad Hadi. Theoretical analysis and simulations of vertically vibrated granular materials. Lappeenranta : Lappeenranta University of Technology, 2005.
Trouver le texte intégralEnvironmental Systems Analysis and Management : Material Flow Analysis and Integration of Watersheds and Drainage Systems. Saarbrücken : VDM Verlag Dr. Müller, 2010.
Trouver le texte intégralJasch, Christine. Environmental and material flow cost accounting : Principles and procedures / Christine Jasch. [New York] : Springer, 2009.
Trouver le texte intégralThiros, Susan A. Chemical composition of ground water, hydrologic properties of basin-fill material, and ground-water movement in Salt Lake Valley, Utah. Salt Lake City, Utah : Utah, Dept. of Natural Resources, Division of Water Rights, 1995.
Trouver le texte intégralRamirez, Sotero Manuel. Flow cytometric analysis of material induced platelet derived microparticles, activated platelets, and platelet leukocyte associations. Ottawa : National Library of Canada, 1993.
Trouver le texte intégralRapera, Corazon Lira. Economic and sustainability indications from trends in material flows in the Philippines, 1981-2002. Chiba-shi, Chiba, Japan] : Institute of Developing Economies, Japan External Trade Organization, 2006.
Trouver le texte intégralChapitres de livres sur le sujet "Material Flow Analysi"
Nylund, Hasse, et Minna Lanz. « Material Flow Analysis ». Dans Encyclopedia of the UN Sustainable Development Goals, 1–15. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-71062-4_8-1.
Texte intégralNylund, Hasse, et Minna Lanz. « Material Flow Analysis ». Dans Encyclopedia of the UN Sustainable Development Goals, 462–75. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-95726-5_8.
Texte intégralLaner, David, et Helmut Rechberger. « Material Flow Analysis ». Dans LCA Compendium – The Complete World of Life Cycle Assessment, 293–332. Dordrecht : Springer Netherlands, 2016. http://dx.doi.org/10.1007/978-94-017-7610-3_7.
Texte intégralKennedy, Peter, et Rong Zheng. « Material Properties of Polymers ». Dans Flow Analysis of Injection Molds, 19–33. München : Carl Hanser Verlag GmbH & ; Co. KG, 2013. http://dx.doi.org/10.3139/9781569905227.003.
Texte intégralKennedy, Peter, et Rong Zheng. « Long Fiber-Filled Materials ». Dans Flow Analysis of Injection Molds, 131–40. München : Carl Hanser Verlag GmbH & ; Co. KG, 2013. http://dx.doi.org/10.3139/9781569905227.009.
Texte intégralNaohiro, Goto, Nova Ulhasanah, Hirotsugu Kamahara, Udin Hasanudin, Ryuichi Tachibana et Koichi Fujie. « Material and Energy Flow Analysis ». Dans Sustainability Assessment of Renewables-Based Products, 125–40. Chichester, UK : John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781118933916.ch9.
Texte intégralBoelens, Jos, et Xander Olsthoorn. « Software for material flow analysis ». Dans Managing a Material World, 111–26. Dordrecht : Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-5125-2_8.
Texte intégralHeragu, Sunderesh S. « Process and Material Flow Analysis ». Dans Facilities Design, 163–202. 5e éd. Boca Raton : CRC Press, 2022. http://dx.doi.org/10.1201/9781003285090-7.
Texte intégralPérez-Rincón, Mario Alejandro. « Materials Flow Analysis in Latin America ». Dans Studies in Ecological Economics, 123–35. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-22566-6_11.
Texte intégralMoriguchi, Yuichi, et Seiji Hashimoto. « Material Flow Analysis and Waste Management ». Dans Taking Stock of Industrial Ecology, 247–62. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-20571-7_12.
Texte intégralActes de conférences sur le sujet "Material Flow Analysi"
Bao, Zhimi, Shushen Zhang, Yu Chen, Suling Liu, Yun Zhang et Huanlei Wang. « A Review of Material Flow Analysis ». Dans 2010 International Conference on Management and Service Science (MASS 2010). IEEE, 2010. http://dx.doi.org/10.1109/icmss.2010.5577113.
Texte intégralHara, Minako, Masayuki Tsuda, Kazue Ichino Takahashi, Yasue Nemoto, Jiro Nakamura et Shiro Nishi. « Material Flow Analysis of ICT Business ». Dans 2007 IEEE International Symposium on Electronics and the Environment. IEEE, 2007. http://dx.doi.org/10.1109/isee.2007.369093.
Texte intégralCiocci, Richard C. « Characterizing Naphthalene via Material Flow Analysis ». Dans ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82808.
Texte intégralHunt, Dexter, Joanne Leach, Susan Lee, Chris Bouch, Peter Braithwaite et Chris Rogers. « Material Flow Analysis (MFA) for Liveable Cities ». Dans The 4th World Sustainability Forum. Basel, Switzerland : MDPI, 2014. http://dx.doi.org/10.3390/wsf-4-f010.
Texte intégralSlatter, Paul. « Analysis and flow behaviour prediction of paste material in sheet flow ». Dans 16th International Seminar on Paste and Thickened Tailings. Australian Centre for Geomechanics, Perth, 2013. http://dx.doi.org/10.36487/acg_rep/1363_36_slatter.
Texte intégralTarasyev, Alexander. « APPLICATION OF MATERIAL FLOW ANALYSIS IN THE INDUSTRY ». Dans 15th International Multidisciplinary Scientific GeoConference SGEM2015. Stef92 Technology, 2015. http://dx.doi.org/10.5593/sgem2015/b53/s21.009.
Texte intégralVaicis, Ivo, Kristaps Spade, Alexander Janushevskis et Alexander Boiko. « Experimental analysis of bulk material flow through hopper ». Dans 19th International Scientific Conference Engineering for Rural Development. Latvia University of Life Sciences and Technologies, Faculty of Engineering, 2020. http://dx.doi.org/10.22616/erdev.2020.19.tf429.
Texte intégralFang, Ning. « Sensitivity Analysis of the Material Flow Stress in Machining ». Dans ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-41655.
Texte intégralSoleymani, Azita, Piroz Zamankhan, Hassan Yousefi, William Polashenski et Vesa Tanskanen. « Flow Dynamics of Vibrated Dense Granular Materials in the Presence of Ambient Gas ». Dans ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58445.
Texte intégralDubois, Didier, Helene Fargier et Dominique Guyonnet. « Data Reconciliation under Fuzzy Constraints in Material Flow Analysis ». Dans The 8th conference of the European Society for Fuzzy Logic and Technology. Paris, France : Atlantis Press, 2013. http://dx.doi.org/10.2991/eusflat.2013.4.
Texte intégralRapports d'organisations sur le sujet "Material Flow Analysi"
Wu, Qihua, Kathryn Kremer, Stephen Gibbons et Alan Kennedy. Determination of nanomaterial viscosity and rheology properties using a rotational rheometer. Engineer Research and Development Center (U.S.), avril 2022. http://dx.doi.org/10.21079/11681/43964.
Texte intégralPatel, Reena. Complex network analysis for early detection of failure mechanisms in resilient bio-structures. Engineer Research and Development Center (U.S.), juin 2021. http://dx.doi.org/10.21079/11681/41042.
Texte intégralGiddings, J. Field-flow fractionation in the analysis of energy-related materials. Office of Scientific and Technical Information (OSTI), janvier 1989. http://dx.doi.org/10.2172/5414274.
Texte intégralHarris, Kathleen, et Travis Dahl. Technical assessment of the Old, Mississippi, Atchafalaya, and Red (OMAR) Rivers : HEC-RAS BSTEM analysis of the Atchafalaya River. Engineer Research and Development Center (U.S.), août 2022. http://dx.doi.org/10.21079/11681/45174.
Texte intégralJENNINGS, T. L. Work Flow Analysis Report Consisting of Work Management - Preventive Maintenance - Materials and Equipment. Office of Scientific and Technical Information (OSTI), décembre 1999. http://dx.doi.org/10.2172/798839.
Texte intégralRiscoll, John R., et Paul H. Smith. Statistical analysis of low flow filter efficiency testing results for nuclear material storage container filters. Office of Scientific and Technical Information (OSTI), juin 2011. http://dx.doi.org/10.2172/1074494.
Texte intégralRusso, David, et William A. Jury. Characterization of Preferential Flow in Spatially Variable Unsaturated Field Soils. United States Department of Agriculture, octobre 2001. http://dx.doi.org/10.32747/2001.7580681.bard.
Texte intégralShmulevich, Itzhak, Shrini Upadhyaya, Dror Rubinstein, Zvika Asaf et Jeffrey P. Mitchell. Developing Simulation Tool for the Prediction of Cohesive Behavior Agricultural Materials Using Discrete Element Modeling. United States Department of Agriculture, octobre 2011. http://dx.doi.org/10.32747/2011.7697108.bard.
Texte intégralKnight, T. D., R. G. Steinke et C. Mueller. Thermal and flow analyses of the Nuclear Materials Storage Facility Renovation Title I 60% design. Office of Scientific and Technical Information (OSTI), août 1998. http://dx.doi.org/10.2172/348917.
Texte intégralSavosko, V., I. Komarova, Yu Lykholat, E. Yevtushenko et T. Lykholat. Predictive model of heavy metals inputs to soil at Kryvyi Rih District and its use in the training for specialists in the field of Biology. IOP Publishing, 2021. http://dx.doi.org/10.31812/123456789/4511.
Texte intégral