Bibliographies thématiques / Magneto-inertial measurement units / Articles de revues

Articles de revues sur le sujet « Magneto-inertial measurement units »

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Magneto-inertial measurement units.

Auteur : Grafiati

Publié le 14 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 15 meilleurs articles de revues pour votre recherche sur le sujet « Magneto-inertial measurement units ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

Paloschi, Davide, Marco Bravi, Emiliano Schena, Sandra Miccinilli, Michelangelo Morrone, Silvia Sterzi, Paola Saccomandi et Carlo Massaroni. « Validation and Assessment of a Posture Measurement System with Magneto-Inertial Measurement Units ». Sensors 21, n^o 19 (3 octobre 2021) : 6610. http://dx.doi.org/10.3390/s21196610.

Texte intégral

Résumé :

Inappropriate posture and the presence of spinal disorders require specific monitoring systems. In clinical settings, posture evaluation is commonly performed with visual observation, electrogoniometers or motion capture systems (MoCaps). Developing a measurement system that can be easily used also in non-structured environments would be highly beneficial for accurate posture monitoring. This work proposes a system based on three magneto-inertial measurement units (MIMU), placed on the backs of seventeen volunteers on the T3, T12 and S1 vertebrae. The reference system used for validation is a stereophotogrammetric motion capture system. The volunteers performed forward bending and sit-to-stand tests. The measured variables for identifying the posture were the kyphosis and the lordosis angles, as well as the range of movement (ROM) of the body segments. The comparison between MIMU and MoCap provided a maximum RMSE of 5.6° for the kyphosis and the lordosis angles. The average lumbo-pelvic contribution during forward bending (41.8 ± 8.6%) and the average lumbar ROM during sit-to-stand (31.8 ± 9.8° for sitting down, 29.6 ± 7.6° for standing up) obtained with the MIMU system agree with the literature. In conclusion, the MIMU system, which is wearable, inexpensive and easy to set up in non-structured environments, has been demonstrated to be effective in posture evaluation.

Styles APA, Harvard, Vancouver, ISO, etc.

Horenstein, Rachel E., Yohann R. Goudeau, Cara L. Lewis et Sandra J. Shefelbine. « Using Magneto-Inertial Measurement Units to Pervasively Measure Hip Joint Motion during Sports ». Sensors 20, n^o 17 (2 septembre 2020) : 4970. http://dx.doi.org/10.3390/s20174970.

Texte intégral

Résumé :

The use of wireless sensors to measure motion in non-laboratory settings continues to grow in popularity. Thus far, most validated systems have been applied to measurements in controlled settings and/or for prescribed motions. The aim of this study was to characterize adolescent hip joint motion of elite-level athletes (soccer players) during practice and recreationally active peers (controls) in after-school activities using a magneto-inertial measurement unit (MIMU) system. Opal wireless sensors (APDM Inc., Portland OR, USA) were placed at the sacrum and laterally on each thigh (three sensors total). Hip joint motion was characterized by hip acceleration and hip orientation for one hour of activity on a sports field. Our methods and analysis techniques can be applied to other joints and activities. We also provide recommendations in order to guide future work using MIMUs to pervasively assess joint motions of clinical relevance.

Styles APA, Harvard, Vancouver, ISO, etc.

Zedda, A., E. Gusai, M. Caruso, S. Bertuletti, S. Spanu, A. Pibiri, M. Monticone, A. Cereatti et D. Pani. « A home-based tele-rehabilitation system for stroke patients exploiting magneto-inertial measurement units ». Gait & ; Posture 74 (septembre 2019) : 37–38. http://dx.doi.org/10.1016/j.gaitpost.2019.07.499.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nez, Alexis, Laetitia Fradet, Frédéric Marin, Tony Monnet et Patrick Lacouture. « Identification of Noise Covariance Matrices to Improve Orientation Estimation by Kalman Filter ». Sensors 18, n^o 10 (16 octobre 2018) : 3490. http://dx.doi.org/10.3390/s18103490.

Texte intégral

Résumé :

Magneto-inertial measurement units (MIMUs) are a promising way to perform human motion analysis outside the laboratory. To do so, in the literature, orientation provided by an MIMU is used to deduce body segment orientation. This is generally achieved by means of a Kalman filter that fuses acceleration, angular velocity, and magnetic field measures. A critical point when implementing a Kalman filter is the initialization of the covariance matrices that characterize mismodelling and input error from noisy sensors. The present study proposes a methodology to identify the initial values of these covariance matrices that optimize orientation estimation in the context of human motion analysis. The approach used was to apply motion to the sensor manually, and to compare the orientation obtained via the Kalman filter to a measurement from an optoelectronic system acting as a reference. Testing different sets of values for each parameter of the covariance matrices, and comparing each MIMU measurement with the reference measurement, enabled identification of the most effective values. Moreover, with these optimized initial covariance matrices, the orientation estimation was greatly improved. The method, as presented here, provides a unique solution to the problem of identifying the optimal covariance matrices values for Kalman filtering. However, the methodology should be improved in order to reduce the duration of the whole process.

Styles APA, Harvard, Vancouver, ISO, etc.

Germanotta, Marco, Ilaria Mileti, Ilaria Conforti, Zaccaria Del Prete, Irene Aprile et Eduardo Palermo. « Estimation of Human Center of Mass Position through the Inertial Sensors-Based Methods in Postural Tasks : An Accuracy Evaluation ». Sensors 21, n^o 2 (16 janvier 2021) : 601. http://dx.doi.org/10.3390/s21020601.

Texte intégral

Résumé :

The estimation of the body’s center of mass (CoM) trajectory is typically obtained using force platforms, or optoelectronic systems (OS), bounding the assessment inside a laboratory setting. The use of magneto-inertial measurement units (MIMUs) allows for more ecological evaluations, and previous studies proposed methods based on either a single sensor or a sensors’ network. In this study, we compared the accuracy of two methods based on MIMUs. Body CoM was estimated during six postural tasks performed by 15 healthy subjects, using data collected by a single sensor on the pelvis (Strapdown Integration Method, SDI), and seven sensors on the pelvis and lower limbs (Biomechanical Model, BM). The accuracy of the two methods was compared in terms of RMSE and estimation of posturographic parameters, using an OS as reference. The RMSE of the SDI was lower in tasks with little or no oscillations, while the BM outperformed in tasks with greater CoM displacement. Moreover, higher correlation coefficients were obtained between the posturographic parameters obtained with the BM and the OS. Our findings showed that the estimation of CoM displacement based on MIMU was reasonably accurate, and the use of the inertial sensors network methods should be preferred to estimate the kinematic parameters.

Styles APA, Harvard, Vancouver, ISO, etc.

Cottam, Daniel S., Amity C. Campbell, Mr Paul C. Davey, Peter Kent, Bruce C. Elliott et Jacqueline A. Alderson. « Measurement of uni-planar and sport specific trunk motion using magneto-inertial measurement units : The concurrent validity of Noraxon and Xsens systems relative to a retro-reflective system ». Gait & ; Posture 92 (février 2022) : 129–34. http://dx.doi.org/10.1016/j.gaitpost.2021.11.012.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Jardak, Nabil, Ronan Adam et Sébastien Changey. « A Gyroless Algorithm with Multi-Hypothesis Initialization for Projectile Navigation ». Sensors 21, n^o 22 (11 novembre 2021) : 7487. http://dx.doi.org/10.3390/s21227487.

Texte intégral

Résumé :

Projectiles are subjected to a high acceleration shock at launch (20,000 g and higher) and can spin very fast. Thus, the components of onboard navigation units must therefore withstand such constraints in addition to being inexpensive. This makes only a few inertial sensors suitable for projectiles navigation. Particularly, rate gyroscopes which are gun-hardened and have an appropriate operating range are not widely available. On the other hand, magneto-resistive sensors are inexpensive and can satisfy both gun-hardening and operating range requirements, making them an alternative for angular estimation in guided projectiles. This paper presents a gyroless navigation algorithm for projectiles. The lack of gyroscope is handled by the usage of attitude kinematics computed over past attitude estimates of the filter, coupled with a measurement model based on magnetometer and GPS observations of the attitude. The observability of the attitude when considering non-calibrated magnetometers and its dependency on the initialization is addressed. Then, to cope with the initialization dependency of the filter, we proposed a multi-hypothesis initialization algorithm. In terms of performance, the algorithm is shown to provide a high-rate navigation solution with an interesting performance.

Styles APA, Harvard, Vancouver, ISO, etc.

De Bartolo, Daniela, Valeria Belluscio, Giuseppe Vannozzi, Giovanni Morone, Gabriella Antonucci, Gianluca Giordani, Stefania Santucci et al. « Sensorized Assessment of Dynamic Locomotor Imagery in People with Stroke and Healthy Subjects ». Sensors 20, n^o 16 (13 août 2020) : 4545. http://dx.doi.org/10.3390/s20164545.

Texte intégral

Résumé :

Dynamic motor imagery (dMI) is a motor imagery task associated with movements partially mimicking those mentally represented. As well as conventional motor imagery, dMI has been typically assessed by mental chronometry tasks. In this paper, an instrumented approach was proposed for quantifying the correspondence between upper and lower limb oscillatory movements performed on the spot during the dMI of walking vs. during actual walking. Magneto-inertial measurement units were used to measure limb swinging in three different groups: young adults, older adults and stroke patients. Participants were tested in four experimental conditions: (i) simple limb swinging; (ii) limb swinging while imagining to walk (dMI-task); (iii) mental chronometry task, without any movement (pure MI); (iv) actual level walking at comfortable speed. Limb swinging was characterized in terms of the angular velocity, frequency of oscillations and sinusoidal waveform. The dMI was effective at reproducing upper limb oscillations more similar to those occurring during walking for all the three groups, but some exceptions occurred for lower limbs. This finding could be related to the sensory feedback, stretch reflexes and ground reaction forces occurring for lower limbs and not for upper limbs during walking. In conclusion, the instrumented approach through wearable motion devices adds significant information to the current dMI approach, further supporting their applications in neurorehabilitation for monitoring imagery training protocols in patients with stroke.

Styles APA, Harvard, Vancouver, ISO, etc.

Provenzale, Cecilia, Nicola Di Stefano, Alessia Noccaro et Fabrizio Taffoni. « Assessing the Bowing Technique in Violin Beginners Using MIMU and Optical Proximity Sensors : A Feasibility Study ». Sensors 21, n^o 17 (29 août 2021) : 5817. http://dx.doi.org/10.3390/s21175817.

Texte intégral

Résumé :

Bowing is the fundamental motor action responsible for sound production in violin playing. A lot of effort is required to control such a complex technique, especially at the beginning of violin training, also due to a lack of quantitative assessments of bowing movements. Here, we present magneto-inertial measurement units (MIMUs) and an optical sensor interface for the real-time monitoring of the fundamental parameters of bowing. Two MIMUs and a sound recorder were used to estimate the bow orientation and acquire sounds. An optical motion capture system was used as the gold standard for comparison. Four optical sensors positioned on the bow stick measured the stick–hair distance. During a pilot test, a musician was asked to perform strokes using different sections of the bow at different paces. Distance data were used to train two classifiers, a linear discriminant (LD) classifier and a decision tree (DT) classifier, to estimate the bow section used. The DT classifier reached the best classification accuracy (94.2%). Larger data analysis on nine violin beginners showed that the orientation error was less than 2°; the bow tilt correlated with the audio information (r134=−0.973, 95% CI −0.981,−0.962, p<0.001). The results confirmed that the interface provides reliable information on the bowing technique that might improve the learning performance of violin beginners.

Styles APA, Harvard, Vancouver, ISO, etc.

Paradisi, Francesco, Eugenio Di Stanislao, Aurora Summa, Stefano Brunelli, M. Traballesi et Giuseppe Vannozzi. « Upper body accelerations during level walking in transtibial amputees ». Prosthetics and Orthotics International 43, n^o 2 (16 août 2018) : 204–12. http://dx.doi.org/10.1177/0309364618792745.

Texte intégral

Résumé :

Background: The observation of upper body movement is gaining interest in the gait analysis community. Recent studies involved the use of body-worn motion sensors, allowing translation of laboratory measurements to real-life settings in the context of patient monitoring and fall prevention. Objectives: It was shown that amputee persons demonstrate altered acceleration patterns due to the presence of prosthetic components, while no information is available on how accelerations propagate upwards to the head during level walking. This descriptive study aims to fill this gap. Study design: Original research report. Methods: Twenty definitive prosthesis users with transtibial amputation and 20 age-matched able-bodied individuals participated in the study. Three magneto-inertial measurement units were placed at head, sternum and pelvis level to assess acceleration root mean square. Three repetitions of the 10-m walking test were performed at a self-selected speed. Results: Acceleration root mean square was significantly larger at pelvis and head level in individuals with amputation than in able-bodied participants, mainly in the transverse plane ( p < 0.05). Differences were also observed in how accelerations propagate upwards, highlighting that a different motor strategy is adopted in amputee persons gait to compensate for increased instability. Conclusion: The obtained parameters allow an objective mobility assessment of amputee persons that can integrate with the traditional clinical approach. Clinical relevance Transtibial amputees exhibit asymmetries due to the sound limb’s support prevalence during gait: this is evidenced by amplified accelerations on the transverse plane and by related differences in upper body movement control. Assessing these accelerations and their attenuations upwards may be helpful to understand amputee’s motor strategies and to improve prosthetic training.

Styles APA, Harvard, Vancouver, ISO, etc.

Truppa, Luigi, Michelangelo Guaitolini, Pietro Garofalo, Carlo Castagna et Andrea Mannini. « Assessment of Biomechanical Response to Fatigue through Wearable Sensors in Semi-Professional Football Referees ». Sensors 21, n^o 1 (24 décembre 2020) : 66. http://dx.doi.org/10.3390/s21010066.

Texte intégral

Résumé :

Quantifying muscle fatigue is a key aspect of everyday sport practice. A reliable and objective solution that can fulfil this task would be deeply important for two main reasons: (i) it would grant an objective indicator to adjust the daily training load for each player and (ii) it would provide an innovative tool to reduce the risk of fatigue-related injuries. Available solutions for objectively quantifying the fatigue level of fatigue can be invasive for the athlete; they could alter the performance or they are not compatible with daily practice on the playground. Building on previous findings that identified fatigue-related parameters in the kinematic of the counter-movement jump (CMJ), this study evaluates the physical response to a fatigue protocol (i.e., Yo-Yo Intermittent Recovery Test Level 1) in 16 football referees, by monitoring CMJ performance with wearable magneto-inertial measurement units (MIMU). Nineteen kinematic parameters were selected as suitable indicators for fatigue detection. The analysis of their variations allowed us to distinguish two opposites but coherent responses to the fatigue protocol. Indeed, eight out of sixteen athletes showed reduced performance (e.g., an effective fatigue condition), while the other eight athletes experienced an improvement of the execution likely due to the so-called Post-Activation Potentiation. In both cases, the above parameters were significantly influenced by the fatigue protocol (p < 0.05), confirming their validity for fatigue monitoring. Interesting correlations between several kinematic parameters and muscular mass were highlighted in the fatigued group. Finally, a “fatigue approximation index” was proposed and validated as fatigue quantifier.

Styles APA, Harvard, Vancouver, ISO, etc.

« A HOME-BASED TELE-REHABILITATION SYSTEM FOR STROKE PATIENTS EXPLOITING MAGNETO-INERTIAL MEASUREMENT UNITS ». Gait & ; Posture, août 2019. http://dx.doi.org/10.1016/j.gaitpost.2019.07.439.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Lapresa, Martina, Christian Tamantini, Francesco Scotto Di Luzio, Marco Ferlazzo, Gianfranco Sorrenti, Flavio Corpina et Loredana Zollo. « Validation of Magneto-Inertial Measurement Units for Upper-Limb Motion Analysis through an Anthropomorphic Robot ». IEEE Sensors Journal, 2022, 1. http://dx.doi.org/10.1109/jsen.2022.3193313.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Bertoli, Matilde, Andrea Cereatti, Diana Trojaniello, Laura Avanzino, Elisa Pelosin, Silvia Del Din, Lynn Rochester et al. « Estimation of spatio-temporal parameters of gait from magneto-inertial measurement units : multicenter validation among Parkinson, mildly cognitively impaired and healthy older adults ». BioMedical Engineering OnLine 17, n^o 1 (9 mai 2018). http://dx.doi.org/10.1186/s12938-018-0488-2.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Scalera, Giovanni Marco, Maurizio Ferrarin, Alberto Marzegan et Marco Rabuffetti. « Assessment of Stability of MIMU Probes to Skin-Marker-Based Anatomical Reference Frames During Locomotion Tasks : Effect of Different Locations on the Lower Limb ». Frontiers in Bioengineering and Biotechnology 9 (22 décembre 2021). http://dx.doi.org/10.3389/fbioe.2021.721900.

Texte intégral

Résumé :

Soft tissue artefacts (STAs) undermine the validity of skin-mounted approaches to measure skeletal kinematics. Magneto-inertial measurement units (MIMU) gained popularity due to their low cost and ease of use. Although the reliability of different protocols for marker-based joint kinematics estimation has been widely reported, there are still no indications on where to place MIMU to minimize STA. This study aims to find the most stable positions for MIMU placement, among four positions on the thigh, four on the shank, and three on the foot. Stability was investigated by measuring MIMU movements against an anatomical reference frame, defined according to a standard marker-based approach. To this aim, markers were attached both on the case of each MIMU (technical frame) and on bony landmarks (anatomical frame). For each MIMU, the nine angles between each versor of the technical frame with each versor of the corresponding anatomical frame were computed. The maximum standard deviation of these angles was assumed as the instability index of MIMU-body coupling. Six healthy subjects were asked to perform barefoot gait, step negotiation, and sit-to-stand. Results showed that (1) in the thigh, the frontal position was the most stable in all tasks, especially in gait; (2) in the shank, the proximal position is the least stable, (3) lateral or medial calcaneus and foot dorsum positions showed equivalent stability performances. Further studies should be done before generalizing these conclusions to different motor tasks and MIMU-body fixation methods. The above results are of interest for both MIMU-based gait analysis and rehabilitation approaches using wearable sensors-based biofeedback.

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!