Se connecter

Bibliographies thématiques / Magnetic field- Electrical discharge machining

Sommaire

Articles de revues
Thèses
Chapitres de livres
Actes de conférences

Littérature scientifique sur le sujet « Magnetic field- Electrical discharge machining »

Auteur : Grafiati

Publié le 6 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Magnetic field- Electrical discharge machining ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Magnetic field- Electrical discharge machining"

1

Walkar, Hemant, Vijaykumar S. Jatti et T. P. Singh. « Magnetic Field Assisted Electrical Discharge Machining of AISI 4140 ». Applied Mechanics and Materials 592-594 (juillet 2014) : 479–83. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.479.

Texte intégral

Résumé :

Electric discharge machining (EDM) is a non-conventional machining process in which material removal take place by a series of electric spark generated between the small gap of both electrode and both immersed in dielectric medium. The gap conditions of EDM significntly affect the stability of machining process. Thus, the machining performance would be improved by removing the debris from the machining gap fastly. In view of this, the objective of present work was to investigate the effect of magnetic field on the material removal rate (MRR) and surface roughness (SR), in conjunction with the variation of electrical parameters like pulse on-off times and gap current, while keeping other electrical parameters and work piece/ tool material constant. Experimental results showed that the magnetic field assisted EDM improves the process stability. Moreover, the EDM process with high efficiency and quality of machined parts could fulfill the requirements of modern manufacturing industries.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Zhang, Zhen, Yi Zhang, Wuyi Ming, Yanming Zhang, Chen Cao et Guojun Zhang. « A review on magnetic field assisted electrical discharge machining ». Journal of Manufacturing Processes 64 (avril 2021) : 694–722. http://dx.doi.org/10.1016/j.jmapro.2021.01.054.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Cheng, Chih-Ping, Kun-Ling Wu, Chao-Chuang Mai, Yu-Shan Hsu et Biing-Hwa Yan. « Magnetic field-assisted electrochemical discharge machining ». Journal of Micromechanics and Microengineering 20, n^o 7 (7 juin 2010) : 075019. http://dx.doi.org/10.1088/0960-1317/20/7/075019.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Rouniyar, Arun Kumar, et Pragya Shandilya. « Fabrication and experimental investigation of magnetic field assisted powder mixed electrical discharge machining on machining of aluminum 6061 alloy ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture 233, n^o 12 (26 mars 2019) : 2283–91. http://dx.doi.org/10.1177/0954405419838954.

Texte intégral

Résumé :

Magnetic field assisted powder mixed electrical discharge machining is a hybrid machining process with suitable modification in electrical discharge machining combining the use of magnetic field and fine powder in the dielectric fluid. Aluminum 6061 alloy has found highly significance for the advanced industries like automotive, aerospace, electrical, marine, food processing and chemical due to good corrosion resistance, high strength-to-weight ratio, ease of weldability. In this present work, magnetic field assisted powder mixed electrical discharge machining setup was fabricated and experiments were performed using one factor at a time approach for aluminum 6061 alloy. The individual effect of machining parameters namely, peak current, pulse on time, pulse off time, powder concentration and magnetic field on material removal rate and tool wear rate was investigated. The effect of peak current was found to be dominant on material removal rate and tool wear rate followed by pulse on time, powder concentration and magnetic field. Increase in material removal rate and tool wear rate was observed with increase in peak current, pulse on time and a decrease in pulse off time, whereas, for material removal rate increases and tool wear rate decreases up to the certain value and follow the reverse trend with an increase in powder concentration. Material removal rate was increased and tool wear rate was decreased with increase in magnetic field.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Yu, Po Huai, Jung Chou Hung, Hsin Min Lee, Kun Ling Wu et Biing Hwa Yan. « Machining Characteristics of Magnetic Force-Assisted Electrolytic Machining for Polycrystalline Silicon ». Advanced Materials Research 325 (août 2011) : 523–29. http://dx.doi.org/10.4028/www.scientific.net/amr.325.523.

Texte intégral

Résumé :

Wire electrical discharge machining (WEDM) of polycrystalline silicon (polysilicon) involves high-temperature melting that easily produces cracks on the silicon surface. This paper studies improvements of cracks and craters on surface of polysilicon after wire electrical discharge machining (WEDM) by magnetic force-assisted electrolytic machining (MFA-EM). The effects of different MFA-EM parameters on material removal and surface roughness are explored to understand the machining characteristics of MFA-EM and how magnetic field assistance contributes to high-efficiency and high-quality machining. Experimental results show that compared with standard EM, MFA-EM can achieve better machining efficiency and surface quality because MFA-EM can effectively enhance electrolyte circulation and replenishment, which contributes to better machining stability.

Styles APA, Harvard, Vancouver, ISO, etc.

6

Yeo, S. H., M. Murali et H. T. Cheah. « Magnetic field assisted micro electro-discharge machining ». Journal of Micromechanics and Microengineering 14, n^o 11 (11 août 2004) : 1526–29. http://dx.doi.org/10.1088/0960-1317/14/11/013.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Jadhav, Rahul R., Vijaykumar S. Jatti et T. P. Singh. « Magnetic Field Assisted Electric Discharge Machining of Cryo-Treated Monel 400 Alloy ». Applied Mechanics and Materials 787 (août 2015) : 371–75. http://dx.doi.org/10.4028/www.scientific.net/amm.787.371.

Texte intégral

Résumé :

Monel alloys are pioneering materials which have exceptional engineering properties such as corrosion resistance, high toughness and show good response to cryogenic treatment. It finds uses in ship building, nuclear aerospace, missile and valve industries. These materials shows strain hardening effect which results in tool wear and in some cases tool breakage when machined by conventional methodshence, unconventional machining such as electrical discharge machining (EDM)discoverspurpose for machining of such materials. Researchers have recognized relation between electrical input process parameters of EDM process and output parameters of EDM process. But researchers have not investigated the influence of external magnetic field and cryo-treatment of work piece on EDM performance measures namely material removal rate (MRR) and tool wear rate (TWR). In vision of this the objective of present work was to study the effect of gap current, external magnetic field and cryogenic treatment of work part on MRR and TWR. Experiments were carried out by creating a 3 mm square hole on Monel400 alloys. Based on experimental results it was found that as gap current increases the MRR and TWR increases for untreated work part. For treated work part MRR increases and TWR decreases with increasein gap current. MRR and TWR increases with constant gap current for untreated work part, as magnetic field increases. For treated work part MRR increases and TWR decreases with increase in magnetic field at constant gap current.

Styles APA, Harvard, Vancouver, ISO, etc.

8

Takezawa, Hideki, Nobuhiro Yokote et Naotake Mohri. « External Magnetic Field Control during EDM of a Permanent Magnet ». Advanced Materials Research 1017 (septembre 2014) : 806–11. http://dx.doi.org/10.4028/www.scientific.net/amr.1017.806.

Texte intégral

Résumé :

The effect of changes in the magnetic field on the magnetic flux density during the electrical discharge machining (EDM) of a permanent magnet is reported. During EDM of the permanent magnet, a second magnet for the external magnetic field was set up, and the internal temperature and surface magnetic flux density on the opposite surface of the permanent magnet during machining were evaluated. It was found that even though the internal temperature of the magnet remained unchanged, the surface magnetic flux density changed when the external magnetic field was varied. In addition, the magnetic field generated by the magnet changed when a plate with high permeability was pressed onto the surface of the permanent magnet.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Ablyaz, Timur Rizovich, Preetkanwal Singh Bains, Sarabjeet Singh Sidhu, Karim Ravilevich Muratov et Evgeny Sergeevich Shlykov. « Impact of Magnetic Field Environment on the EDM Performance of Al-SiC Metal Matrix Composite ». Micromachines 12, n^o 5 (21 avril 2021) : 469. http://dx.doi.org/10.3390/mi12050469.

Texte intégral

Résumé :

In the present work, a hybrid magnetic field assisted powder mixed electrical discharge machining had been carried out on the Aluminum-Silicon Carbide (Al-SiC) metal matrix composite. The aim of the study was to obtain higher surface finish, and enhanced material removal rate. The dielectric mediums employed were plain EDM oil, SiCp mixed and graphite powder mixed EDM oil for flushing through the tube electrode. The magnetic field intensity, discharge current, T-on/off duration and type of dielectric were the control variables used for present investigation. From the results, it was observed that the machining variables for instance, discharge current, T-on/off duration and type of dielectric conditions remarkably affected the material removal rate, micro-hardness and surface roughness of the machined composite material. The MRR augmented considerably with an increase in the magnetic field intensity along with peak current. Subsequently, the composite with lesser vol.% of SiC particulates witnessed sharp rise in MRR in maximum magnetic field environment (0.66T). In addition, quality of the machined surface improved significantly in graphite powder mixed dielectric flushing condition with intermediate external magnetic field environment. Besides, an enhancement of micro-hardness was quantified as compared to base material due to the transfer of the material (SiCp) during powder mixed ED machining.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Teimouri, Reza, et Hamid Baseri. « Study of Tool Wear and Overcut in EDM Process with Rotary Tool and Magnetic Field ». Advances in Tribology 2012 (2012) : 1–8. http://dx.doi.org/10.1155/2012/895918.

Texte intégral

Résumé :

Tool wear and workpiece overcut have been studied in electrical discharge machining process with rotational external magnetic field and rotational electrode. Experiments have been divided to three main regimes, namely, low-energy regime, middle-energy regime, and high-energy regime. The influence of process parameters were investigated on electrode wear rate and overcut. Results indicate that applying a magnetic field around the machining gap increases the electrode wear rate and overcut. Also, rotation of the tool has negative effect on overcut.

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Magnetic field- Electrical discharge machining"

1

Penkal, Bryan James. « Steps in the Development of a Full Particle-in-Cell, Monte Carlo Simulation of the Plasma in the Discharge Chamber of an Ion Engine ». Wright State University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=wright1367586856.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Mokhtari, Ahmed. « Etude et realisation d'un plasma dense quasi-stationnaire et homogene de 1m de long en presence d'un champ magnetique module spatialement ». Paris 6, 1988. http://www.theses.fr/1988PA066423.

Texte intégral

Résumé :

Le plasma etudie est faiblement non ideal, il est cree par decharge electrique dans un tube a eclairs lineaire d'1 m de long rempli de xenon sous une pression initiale de 30 torrs. Une etude de l'evolution spatiotemporelle de la decharge permet de definir les meilleurs conditions de fonctionnement du systeme. Le plasma presente une phase quasi-stationnaire de 400 mu s, pendant laquelle ses parametres ont ete determines

Styles APA, Harvard, Vancouver, ISO, etc.

3

Beravala, Hardikkumar Shashikantbhai. « Experimental investigations and modelling of magnetic field-air/gas assisted electrical discharge machining ». Thesis, 2018. http://eprint.iitd.ac.in:80//handle/2074/7984.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Lin, Chun-yi, et 林軍屹. « Study on Machining of Quartz by Using Adjustable Magnetic Field Assisted in Electrochemical Discharge Machining ». Thesis, 2012. http://ndltd.ncl.edu.tw/handle/97075951966144456631.

Texte intégral

Résumé :

碩士
國立中央大學
機械工程研究所
100
Since quartz is a hard and brittle material, it is difficult to achieve high efficiency and high reliability using conventional methods, especially in the manufacturing of micro parts and components. Electrochemical discharge machining (ECDM) is an emerging non-traditional machining process that involves high-temperature melting assisted by accelerated chemical etching. During ECDM, gas film will be formed on the tool electrode surface due to electrochemical reaction and then result in discharge phenomenon. Therefore both the structure and stability of gas film have significant effect factors on the efficiency and precision of machining. During ECDM, the impact of high heat discharged and the differences in electrolyte cycle cause gas film to be irregular in structure and unstable in status. As a result, both the quality and efficiency of ECDM are undermined. Therefore, this study will first explore the effect of different electrode types for processing performance, and in order to improve the stability of gas film structure, this study attempt to use the tunable magnetic field (electromagnet) effect keeps bubbles move quickly form the tool electrode. both the stability of gas film structure and the efficiency of electrolyte cycle in micro holes are greatly enhanced. According to the experimental results, by changing the electrode shape, that machining time was reduced by 73.8%, can be substantially improved processing efficiency. Then increase the tunable magnetic field, that machining time was reduced by 49.5%, and the standard deviation of the processing time achieve 91.8%. Finally, tunable magnetic field generated by asymmetric gas film type, further enhance the capacity of the electrolyte cycle. Thus machining time was reduced by 24.4% again.

Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Magnetic field- Electrical discharge machining"

1

Singh, Mahavir, Vyom Sharma et Janakarajan Ramkumar. « Magnetic Field Assistance in the EDM Process ». Dans Electric Discharge Hybrid-Machining Processes, 201–24. New York : CRC Press, 2022. http://dx.doi.org/10.1201/9781003202301-10.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Rajkumar, G. Mannoj, Abimannan Giridharan, R. Oyyaravelu et A. S. S. Balan. « Investigation on Magnetic Field-assisted Near-dry Electrical Discharge Machining of Inconel 600 ». Dans Lecture Notes on Multidisciplinary Industrial Engineering, 671–84. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9471-4_56.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Khan, Mohd Yunus, P. Sudhakar Rao et B. S. Pabla. « A Framework for Magnetic Field-Assisted Electrical Discharge Machining (MFA-EDM) of Inconel-625 Using Bio-oil Dielectric ». Dans Additive, Subtractive, and Hybrid Technologies, 77–87. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99569-0_6.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Rouniyar, Arun Kumar, et Pragya Shandilya. « Analysis and Optimization of Tool Wear Rate in Magnetic Field-Assisted Powder-Mixed Electrical Discharge Machining of Al6061 Alloy Using TLBO ». Dans Lecture Notes on Multidisciplinary Industrial Engineering, 485–95. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9072-3_42.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Kao, Chen-Chun, et Albert Shih. « Micro Electrical Discharge Machining of Spray Holes for Diesel Fuel Systems ». Dans Intelligent Energy Field Manufacturing, 213–41. CRC Press, 2010. http://dx.doi.org/10.1201/ebk1420071016-c7.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Faisal, Nadeem, Sumit Bhowmik et Kaushik Kumar. « Recent Developments in Wire Electrical Discharge Machining ». Dans Non-Conventional Machining in Modern Manufacturing Systems, 125–52. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-6161-3.ch006.

Texte intégral

Résumé :

The tremendous growth of manufacturing industries and desired need of accuracy and precision has put a great importance on non-traditional machining processes. Metal and non-metals having properties like high strength, toughness, and hardness is generally machined by non-conventional machining methods. One of earliest non-traditional machining that is still in use and being effectively utilized in industries is wire electrical discharge machine. This machining technique gives a tough line of competition to conventional machining process like milling, grinding, broaching, etc. Cutting intricate and delicate shapes with accuracy and precision gives this machining technique an edge over other conventional machining and non-conventional machining processes. This chapter provides an insight to various research and prominent work done in field of WEDM by various scientists, researchers, and academicians. The chapter also emphasizes various advantages and disadvantages of different modelling and optimization methods used. The chapter concludes with some recommendations about trends for future WEDM researchers.

Styles APA, Harvard, Vancouver, ISO, etc.

7

Mondal, Sibabrata, et Dipankar Bose. « Evaluation of Surface Roughness in Wire Electrical Discharge Turning Process ». Dans Machine Learning Applications in Non-Conventional Machining Processes, 114–36. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-3624-7.ch008.

Texte intégral

Résumé :

This investigation presents an experimental investigation in developing small cylindrical pins in electrolytic tough pitch copper (ETP Cu) material using wire electrical discharge turning (WEDT) to evaluate surface roughness of the cylindrical turning faces. The material ETP Cu is soft in nature and has growing range of application in the field of aerospace and electronics industries for advanced applications. In this process, a customized rotary spindle has been developed and added to five-axis CNC wire electrical discharge machine (WEDM) and straight turning of the cylindrical pin has been done up to a length of 15mm with 0.5mm diameter. Under this investigation, 31 experiments along with two confirmation tests have been carried out to study the influence of four design factors—pulse on time, pulse off time, spindle speed, and servo voltage—on the machining performance of surface roughness by means the technique of design of experiment (DOE).

Styles APA, Harvard, Vancouver, ISO, etc.

8

Mukhopadhyay, Premangshu. « Analysis of Performance Characteristics by Firefly Algorithm-Based Electro Discharge Machining of SS 316 ». Dans Machine Learning Applications in Non-Conventional Machining Processes, 45–54. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-3624-7.ch004.

Texte intégral

Résumé :

The process of combining two or more non-conventional machining processes to obtain the required machining performance is known as hybridisation. Hybrid electro discharge machining came into the picture of macro machining due to the requirement of more rapid machining process with improved efficiency of non-conventional machining process. The technique of vibration assisted EDM process did not prove to be successful due to some disadvantages like increase in tool wear for low melting and comparatively softer tool material. Therefore, a need for more advanced hybridised process has been realized to improve the overall machining efficiency specially circularity and radial overcut. A permanent magnetic field force assisted EDM process was carried out on SS 316 plate with tungsten carbide tool of 5 mm diameter. MRR, TWR, and diametral overcut have been optimized by firefly algorithm technique which showed satisfactory results. It has been found that tool wear and diametral overcut has been found to be reduced with magnetic field-assisted EDM than conventional EDM processes.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Equbal, Azhar, Md Israr Equbal, Md Asif Equbal et Anoop Kumar Sood. « An Insight on Current and Imminent Research Issues in EDM ». Dans Non-Conventional Machining in Modern Manufacturing Systems, 33–54. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-6161-3.ch002.

Texte intégral

Résumé :

Electrical discharge machining (EDM) is an important unconventional manufacturing process which machines the workpieces by a series of recurring electrical discharges between tool and workpiece completely immersed in a dielectric. A power supply establishes an electric field between tool and workpiece while a proper gap is maintained between them by a servo controller. Electrostatic force causes electrons to get plucked out from tool and workpiece forming a channel called plasma having low dielectric strength which easily ionizes producing sparks responsible for machining the workpiece. When the power supply is withdrawn, the continuous flushing of dielectric removes the debris from machined cavity in workpiece. EDM is used in machining of dies, molds, parts of aerospace, automotive industry, and surgical components. The study presents an insight on various research issues in EDM which would help the research community to establish their research objective to investigate. Based on current research trends and need of EDM study, the chapter also proposes some important future research issues.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Das, Raja, et Mohan Kumar Pradhan. « Artificial Neural Network Training Algorithms in Modeling of Radial Overcut in EDM ». Dans Soft Computing Techniques and Applications in Mechanical Engineering, 140–50. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-3035-0.ch006.

Texte intégral

Résumé :

This chapter describes with the comparison of the most used back propagations training algorithms neural networks, mainly Levenberg-Marquardt, conjugate gradient and Resilient back propagation are discussed. In the present study, using radial overcut prediction as illustrations, comparisons are made based on the effectiveness and efficiency of three training algorithms on the networks. Electrical Discharge Machining (EDM), the most traditional non-traditional manufacturing procedures, is growing attraction, due to its not requiring cutting tools and permits machining of hard, brittle, thin and complex geometry. Hence it is very popular in the field of modern manufacturing industries such as aerospace, surgical components, nuclear industries. But, these industries surface finish has the almost importance. Based on the study and test results, although the Levenberg-Marquardt has been found to be faster and having improved performance than other algorithms in training, the Resilient back propagation algorithm has the best accuracy in testing period.

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Magnetic field- Electrical discharge machining"

1

Kachari, Kishor Kumar, Yugandhara Rao Yadam, S. Ezhil, N. Arunachalam et Kavitha Arunachalam. « Design of near field magnetic probe for monitoring wire electrical discharge machining process ». Dans 2022 IEEE Region 10 Symposium (TENSYMP). IEEE, 2022. http://dx.doi.org/10.1109/tensymp54529.2022.9864562.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Zhang, Jin, et Fuzhu Han. « High-Speed EDM Milling Using Rotating Short Arcs Under Composite Field ». Dans ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63535.

Texte intégral

Résumé :

Abstract This paper proposed a new method of high-speed electrical discharge machining (EDM) using rotating short arcs under composite field. By the Lorentz force, the electric force and the high-speed rotation of the tool electrode, rotating short arcs are generated between the tool electrode and the workpiece, which can greatly improve the material removal rate of difficult-to-cut materials such as titanium alloys and superalloys. Firstly, the machining equipment used to generate rotating short arcs was constructed. Secondly, single arc discharge experiment was carried out to investigate the motion characteristics of rotating short arcs. The result shows that the arcs can rotate between the tool electrode and workpiece under composite field. Then, the experiment of processing GH4169 was conducted to explore the machining characteristics of rotating short arcs milling, which indicated that rotating short arcs can achieve a much higher material removal rate (MRR). Additionally, it’s found that the magnetic field also has influence on debris, which is beneficial to debris removal. Finally, a comparative experiment was carried out. The MRR of rotating short arcs milling was three times than that of traditional EDM, and the tool electrode wear rate (TEWR) is only one-fifth of that of traditional EDM. The comparative experiment further verified that rotating short arcs milling can achieve higher MRR and lower TEWR.

Styles APA, Harvard, Vancouver, ISO, etc.

3

« EFFECT OF MAGNETIC FIELD ON ELECTRODE WEAR RATIO IN ELECTRO-DISCHARGE MACHINING ». Dans International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering. ELK Asia Pacific Journals, 2015. http://dx.doi.org/10.16962/elkapj/si.arimpie-2015.38.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Hepburn, D. M., B. G. Steward, L. A. Dissado et J. C. Fothergill. « Magnetic field disturbance of partial discharge activity in a cone-plane gap ». Dans 2007 Electrical Insulation Conference and Electrical Manufacturing Expo. IEEE, 2007. http://dx.doi.org/10.1109/eeic.2007.4562606.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Jong Girl Ok, Bo Hyun Kim, Do Kwan Chung, Seung Min Lee, Woo Yong Sung, Wal Jun Kim, Chong Nam Chu et Yong Hyup Kim. « Electrical discharge machining of carbon nanomaterials : Mechanisms and the advanced field emission applications ». Dans 2007 IEEE 20th International Vacuum Nanoelectronics Conference. IEEE, 2007. http://dx.doi.org/10.1109/ivnc.2007.4480939.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Klement'eva, Irina, et Valentin Bityurin. « Electrical Discharge - Gas Flows Media Interaction in External Magnetic Field ». Dans 46th AIAA Aerospace Sciences Meeting and Exhibit. Reston, Virigina : American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-1393.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Wallash, Al, Lydia Baril, Vladimir Kraz et Toni Gurga. « Electromagnetic field induced degradation of magnetic recording heads in a GTEM cell ». Dans 2004 Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE, 2004. http://dx.doi.org/10.1109/eosesd.2004.5272647.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Klementyeva, Irina, Ivan Moralev, Valentin Bityurin et Anatoly Klimov. « Interaction of Electrical Discharge with Swirling Flow in External Magnetic Field ». Dans 42nd AIAA Plasmadynamics and Lasers Conference. Reston, Virigina : American Institute of Aeronautics and Astronautics, 2011. http://dx.doi.org/10.2514/6.2011-3916.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Murdiya, Fri, Budhi Anto, Eddy Hamdani, Suwitno, Edy Evrianto et Amun Amri. « Barrier Discharge In Magnetic Field : The Effect Of Magnet Position Induced Discharge In The Gap ». Dans 2018 2nd International Conference on Electrical Engineering and Informatics (ICon EEI). IEEE, 2018. http://dx.doi.org/10.1109/icon-eei.2018.8784138.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Raniszewski, Grzegorz. « Magnetic field in arc discharge systems for carbon nanotubes synthesis ». Dans 2017 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF). IEEE, 2017. http://dx.doi.org/10.1109/isef.2017.8090753.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!