Bibliographies thématiques / Magnesium foam

Littérature scientifique sur le sujet « Magnesium foam »

Auteur : Grafiati
Publié le 14 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Magnesium foam ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Magnesium foam"

1

Zheng, Weixin, Xueying Xiao, Jing Wen, Chenggong Chang, Shengxia An et Jingmei Dong. « Water-to-Cement Ratio of Magnesium Oxychloride Cement Foam Concrete with Caustic Dolomite Powder ». Sustainability 13, no 5 (24 février 2021) : 2429. http://dx.doi.org/10.3390/su13052429.

Texte intégral
Résumé :
Magnesium oxychloride cement (MOC) foam concrete (MOCFC) is an air-hardening cementing material formed by mixing magnesium chloride solution (MgCl2) and light-burned magnesia (i.e., active MgO). In application, adding caustic dolomite powder into light-burned magnesite powder can reduce the MOCFC production cost. The brine content of MOC changes with the incorporation of caustic dolomite powder. This study investigated the relationship between the mass percent concentration and the Baumé degree of a magnesium chloride solution after bischofite (MgCl2·6H2O) from a salt lake was dissolved in water. The proportional relationship between the amount of water in brine and bischofite, and the functional formula for the water-to-cement ratio (W/C) of MOC mixed with caustic dolomite powder were deduced. The functional relationship was verified as feasible for preparing MOC through the experiment.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Bhogi, S., et M. Mukherjee. « Foam stabilization by magnesium ». Materials Letters 200 (août 2017) : 118–20. http://dx.doi.org/10.1016/j.matlet.2017.04.100.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Huang, Wen Zhan, Hong Jie Luo, Li Zhang, Yong Liang Mu et Xin Cui. « Magnesium-Based Foam Biomaterials and their Related Properties ». Materials Science Forum 933 (octobre 2018) : 282–90. http://dx.doi.org/10.4028/www.scientific.net/msf.933.282.

Texte intégral
Résumé :
The magnesium-based foam biomaterials were prepared by melt foaming process, where Mg-Ca alloy was used as matrix material, hydroxyapatite (HA) as tackifier, MgCO3as foaming agent. The magnesium-based foam biomaterials with uniform structure were used for testing to investigate their compressive and biodegradable behaviors. The biodegradable property of the magnesium-based foam was mainly characterized by microstructure observation and hydrogen evolution. The results showed that the porosity of the magnesium-based foam has a more important impact on yield stress and plateau stress of compressive curves compared to HA content or its size. Corrosion rate of the magnesium-based foams decreases with increasing HA addition. Meanwhile, the porosity of the magnesium-based foams also has a very obvious effect on hydrogen evolution, i.e., the hydrogen evolution rate increases with decreasing the porosity of magnesium-based foams.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Kikuchi, Yusuke, Koji Kakehi, Koichi Kitazono, Eiichi Sato et Kazuhiko Kuribayashi. « Magnesium Foam Produced from Bulk AZ31 Magnesium Alloy Sheets ». Materials Science Forum 475-479 (janvier 2005) : 501–4. http://dx.doi.org/10.4028/www.scientific.net/msf.475-479.501.

Texte intégral
Résumé :
Using commercial AZ31 magnesium alloy sheets, we produced a foamable preform sheet containing titanium hydride (TiH2) powder through diffusion-bonding and hot-rolling of four cycles. Heating the preform sheets in Ar atmosphere, we obtained closed-cell magnesium alloy foams with various porosities. The foamed specimen at 883 K showed the maximum porosities of 77%.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Niu, Li Yuan, Zi Mu Shi, Ji Jing Lin, Yong Li, Lin Chao Xu et Lan Zhao. « Anticorrosion Conversion Coating Content Lanthanum and Phosphate on Foam Mg Alloy ». Advanced Materials Research 299-300 (juillet 2011) : 211–14. http://dx.doi.org/10.4028/www.scientific.net/amr.299-300.211.

Texte intégral
Résumé :
Foam magnesium alloy was an idea substitute of hard tissue of human bodies because its elasticity module was close to the bone of human. In the paper, foam degradable magnesium alloys were prepared by “Press-Dissolution-Vacuum sintering-Hot treatment-Aging” powder manufacturing process firstly. Then samples were coated by immersion in a bath containing phosphate and rare earths lanthanum. Results show that, Mg-0.9Mn foam magnesium alloys after hot treatment had better anticorrosion performance; and coated foam magnesium alloys form the bath with phosphate lanthanum chloride had lower rate of degradation.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Qiu, Ke Qiang, Yan Qiu Liu, Z. Y. Suo, Y. L. Ren et Zhen Liu. « Nickel Foam Reinforced AZ91 Magnesium Alloy ». Materials Science Forum 546-549 (mai 2007) : 471–76. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.471.

Texte intégral
Résumé :
Nickel foam reinforced AZ91 magnesium alloy was fabricated by using melt infiltration and water quenching methods. The mechanical properties were measured in compressive and tensile deformation modes. Fracture surfaces were examined by scanning electronic microscopy. The results show that addition of nickel foam results in a significant increase in elastic modulus, yield strength of the composite material. However, ductility of the composite was adversely affected when compared to the unreinforced monolithic counterpart.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Luo, Hongjie, Jiahao Zhao, Hao Du, Wei Yin et Yang Qu. « Effect of Mg Powder’s Particle Size on Structure and Mechanical Properties of Ti Foam Synthesized by Space Holder Technique ». Materials 15, no 24 (12 décembre 2022) : 8863. http://dx.doi.org/10.3390/ma15248863.

Texte intégral
Résumé :
Titanium foam has been the focus of special attention for its specific structure and potential applications in purification, catalyst substrate, heat exchanger, biomaterial, aerospace and naval industries. However, the liquid-state foaming techniques are difficult to use in fabricating Ti foam because of its high melting temperature and strong chemical reactivity with atmospheric gases. Here, the fabrication of Ti foams via the powder metallurgy route was carried out by utilizing both magnesium powders and magnesium particles as spacer holders, and Ti powders as matrix metal. The green compacts containing Ti powder, Mg powder and Mg particles were heated to a certain temperature to remove the magnesium and obtain the Ti foam. The results show that the porosities of the obtained Ti foam are about 35–65%, and Young’s modulus and yield strength are found to be in the ranges of 22–126 MPa and 0.063–1.18 GPa, respectively. It is found that the magnesium powders play a more important role than the magnesium particles in the deformation and the densification of the green compact during the pressing, and the pore structure of Ti foam depends on the amount and the size of the magnesium spacer holders after sintering.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Lin, Hao, Hong Jie Luo, Wei Sun et Guang Chun Yao. « Influence of Additives on Preparation of Aluminum Foam ». Advanced Materials Research 785-786 (septembre 2013) : 91–96. http://dx.doi.org/10.4028/www.scientific.net/amr.785-786.91.

Texte intégral
Résumé :
Aluminum foam was fabricated by using powder compact metallurgy method. The variation of magnesium particle as the metal additive during sintering was investigated. The addition of SiC particles on the morphology of the foams was discussed. The results revealed that for the foamable precursor with magnesium powders (1wt.%) added, the diffusion boundary between magnesium and the matrix could be increased with extending the sintering time. It was thought that the viscosity of melt increased by adding SiC particles so that the coalescence among the pores during foaming was relieved. As a result, the stability of the aluminum foam would be increased during foaming.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Yilong, Liao, Qiu Guibao, Yang Yang, Lv Xuewei et Bai Chenguang. « Preparation and Compressive Properties of Magnesium Foam ». Rare Metal Materials and Engineering 45, no 10 (octobre 2016) : 2498–502. http://dx.doi.org/10.1016/s1875-5372(17)30022-x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

DIOLOGENT, F., R. GOODALL et A. MORTENSEN. « Creep of aluminium–magnesium open cell foam ». Acta Materialia 57, no 3 (février 2009) : 830–37. http://dx.doi.org/10.1016/j.actamat.2008.10.019.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Magnesium foam"

1

Asik, Emin Erkan. « Characterization And Fatigue Behaviour Of Ti-6al-4v Foams ». Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614570/index.pdf.

Texte intégral
Résumé :
Porous Ti-6Al-4V alloys are widely used in the biomedical applications for hard tissue implantation due to its biocompatibility and elastic modulus being close to that of bone. In this study, porous Ti-6Al-4V alloys were produced with a powder metallurgical process, space holder technique, where magnesium powders were utilized in order to generate porosities in the range of 50 to 70 vol. %. In the productions of Ti-6Al-4V foams, first, the spherical Ti-6Al-4V powders with an average size of 55 &mu
m were mixed with spherical magnesium powders sieved to an average size of 375 &mu
m, and then the mixtures were compacted with a hydraulic press under 500 MPa pressure by using a double-ended steel die and finaly, the green compacts were sintered at 1200
Styles APA, Harvard, Vancouver, ISO, etc.
2

Storti, Enrico. « Functionalization of carbon-bonded ceramic foam filters with nano-scaled materials for steel melt filtration ». Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2018. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-235114.

Texte intégral
Résumé :
In order to improve the purity of steel castings, the use of special reactive coatings on carbon-bonded ceramic foam filters was explored. Carbon nanotubes were dispersed in water by means of ultrasonic treatment, using xanthan gum to stabilize the nanotubes in suspension and control the rheological behavior. The coatings were applied by cold spraying and binding was achieved during heat treatment in reducing atmosphere, thanks to an artificial pitch added to the slurry. The coated filters were successfully immersed in molten steel for different times. The thickness of the first alumina layer generated at the interface was independent of the immersion time: concentration gradients through its thickness suggested that the formation of this structure is limited by diffusion. Investigation of the steel after solidification by means of ASPEX showed that the presence of the coating influenced the size as well as the chemical composition of the remaining inclusions. Nano-coated filters had the best filtration efficiency (up to 95% for alumina inclusions after 10 s), but longer tests resulted in worse performance. In addition, coatings based on calcium aluminates in combination with carbon showed an efficiency greater than 97% for steel samples taken directly from the melt.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ho, Samson Shing Chung. « Lost Foam Casting of Periodic Cellular Materials with Aluminum and Magnesium Alloys ». Thesis, 2009. http://hdl.handle.net/1807/18760.

Texte intégral
Résumé :
This study investigates the possibility of fabricating periodic cellular materials (PCMs) via the lost foam casting (LFC) process using aluminum alloy A356 and magnesium alloy AZ91. This approach combines the structural efficiency of PCM architectures with the processing advantages of near-net-shape LFC. An initial feasibility study fabricated corrugated A356 panels. This was followed by a study of casting variables such as pattern design, vacuum assistance, and alloying additions in order to improve the fillability of the small cross-section struts. Finally, integrated pyramidal sandwich panels having different relative densities were subjected to artificial aging treatments and subsequently tested in uniaxial compression. The A356 PCMs experienced a continuous increase after yielding while the AZ91 PCMs exhibited strut fracture after peak strength. The results showed the compressive yield strengths of this study are comparable with those previously reported PCMs produced by different fabrication methods.
Styles APA, Harvard, Vancouver, ISO, etc.

Livres sur le sujet "Magnesium foam"

1

Magnesium form China and Russia : Investigation nos. 731-TA-1071-1072 (review). Washington, DC : U.S. International Trade Commission, 2011.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Turney, Ben, et John Reynard. Prevention of idiopathic calcium stones. Sous la direction de John Reynard. Oxford University Press, 2017. http://dx.doi.org/10.1093/med/9780199659579.003.0015.

Texte intégral
Résumé :
The main principles of idiopathic calcium oxalate stone prevention are to maintain dilute urine through increasing fluid intake and to reduce calcium and oxalate excretion. The influence of various urinary factors on the risk of stone formation has been quantified mathematically. Urine volume and urinary oxalate concentration are most influential on the risk of stone formation, while magnesium concentration contributes a small amount to risk. It is estimated that around 50% of stone formers will form another stone within five years. Some stone formers have frequent recurrences. Most stone formers ask how they can prevent future episodes. Advice can be generic or personalized, and treatment may include changes to diet, fluid intake, and addition of drugs to alter urine biochemistry.
Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Magnesium foam"

1

Kikuchi, Yusuke, Koji Kakehi, Koichi Kitazono, Eiichi Sato et Kazuhiko Kuribayashi. « Magnesium Foam Produced from Bulk AZ31 Magnesium Alloy Sheets ». Dans Materials Science Forum, 501–4. Stafa : Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.501.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Qiu, K. Q., Yan Qiu Liu, Z. Y. Suo, Y. L. Ren et Zhen Liu. « Nickel Foam Reinforced AZ91 Magnesium Alloy ». Dans Materials Science Forum, 471–76. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.471.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Hirschmann, Markus, Carolin Körner et Robert F. Singer. « Integral Foam Molding - A New Process for Foamed Magnesium Castings ». Dans THERMEC 2006, 1827–32. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.1827.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Mehara, Kazuhito, Makoto Kobashi et Naoyuki Kanetake. « Fabrication of Magnesium Foam by Precursor Method Using Machined Chips ». Dans Advanced Materials Research, 905–8. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-463-4.905.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Rathore, Ram Krishna, Nitish Kumar Singh et J. Francis Xavier. « Characterization of AA7075 Alloy Foam Using Calcium and Magnesium Carbonate as Foaming Agent ». Dans Springer Proceedings in Materials, 289–97. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-3937-1_30.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Yuvaraj, L., S. Jeyanthi, Digvijay D. Kadam et R. G. Ajai. « Influence of Magnesium Hydroxide Fillers on Acoustic, Thermal, and Flame Retardant Properties of Pu Foam ». Dans Lecture Notes in Mechanical Engineering, 393–408. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4745-4_35.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Hirschmann, Markus, Matthias Lamm, Carolin Körner et Robert F. Singer. « Magnesium Integral Foams - Production and Properties ». Dans Magnesium, 354–59. Weinheim, FRG : Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527603565.ch55.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Zeschky, J., T. Höfner, J. Lo, M. Scheffler et P. Greil. « High Strength Si-O-C Ceramic Foams for the Reinforcement of Mg-Alloys ». Dans Magnesium, 378–83. Weinheim, FRG : Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527603565.ch59.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Bichler, L., et C. Ravindran. « Observations on the Thermal Response and Mold Filling Behavior of an AZ91E Magnesium Alloy Cast by the Lost Foam Casting Process ». Dans THERMEC 2006, 1609–14. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.1609.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Tausig, G., N. J. Ricketts et S. R. Peck. « Forging of Magnesium Using Squeeze Cast Pre-Form ». Dans Magnesium Technology 2001, 235–42. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118805497.ch41.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Magnesium foam"

1

Marlatt, Michael, David Weiss et John N. Hryn. « Development in Lost Foam Casting of Magnesium ». Dans SAE 2003 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2003. http://dx.doi.org/10.4271/2003-01-0821.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Adnan, Sinar Arzuria, Firuz Zainuddin, Nur Hidayah Ahmad Zaidi, Hazizan Md Akil et Sahrim Ahmad. « Polyurethane foam with multi walled carbon nanotubes/magnesium hybrid filler ». Dans THE 2ND INTERNATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND METALLURGY (ICoFM 2016). Author(s), 2016. http://dx.doi.org/10.1063/1.4958771.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Palaniswamy, Sivashankari, Krishnamoorthy Arunagiri et Prakash Subramaniam. « Compressive strength and energy absorption of magnesium foam with REE by powder metallurgy process ». Dans 3RD INTERNATIONAL CONFERENCE ON FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (FAME 2020). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0034356.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Adnan, S. A., N. H. A. Zaidi, Y. M. Daud et F. Zainuddin. « The effect of magnesium content on the properties of palm oil based polyurethane foam ». Dans GREEN DESIGN AND MANUFACTURE : ADVANCED AND EMERGING APPLICATIONS : Proceedings of the 4th International Conference on Green Design and Manufacture 2018. Author(s), 2018. http://dx.doi.org/10.1063/1.5066691.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Palaniswamy, Sivashankari, Krishnamoorthy Arunagiri et S. Prakash. « Corrosion behaviour of closed cell magnesium foam with rare earth elements by powder metallurgy process ». Dans 3RD INTERNATIONAL CONFERENCE ON FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (FAME 2020). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0034354.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Marko, P. J., R. P. Fetherston et J. R. Conrad. « Plasma source ion implantation of magnesium alloys ». Dans International Conference on Plasma Science (papers in summary form only received). IEEE, 1995. http://dx.doi.org/10.1109/plasma.1995.531473.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Dunne, Timothy Ryan, Wenhan Yue, Lei Zhao, Damon Nettles, Peng Cheng, Jiaxiang Ren et Yu Liu. « Addressing Corrosion Stress Cracking Issue of Magnesium Frac Plugs Used in Ultra HPHT Shale Well Development ». Dans Abu Dhabi International Petroleum Exhibition & Conference. SPE, 2021. http://dx.doi.org/10.2118/207634-ms.

Texte intégral
Résumé :
Abstract The paper discusses the unrecognized issue of accelerated cracking and dissolution of stressed high strength dissolvable magnesium components at elevated temperature. A high strength dissolvable magnesium alloy was selected for inclusion in a frac plug designed for 125°C to 175°C service after thorough tensile, compression, and dissolution testing of the alloy. After a 125°C plug field test, the plug exhibited catastrophic, premature failure. Laboratory plug testing of two magnesium alloys for the slips replicated the failure at 140°C in tap water. Dissolution testing of coupons in a more aggressive media showed inadequate mass loss to compromise functionality. It was theorized that the passivating magnesium layer was unable to form due to the stress applied to the components with magnesium's inherent reactivity with water. Slow strain rate testing was used to study the potential mechanism causing stress corrosion cracking. Two high temperature high strength alloys, DM-1 and DM-2, were tested at 4 x 10^-6 in/in/s in 140°C tap water. DM-1 demonstrated a decrease in yield from 52.4 ksi to 33 ksi, a 37% reduction as well as a decrease in ductility from 10.9% to 0.8%, a 93% decrease. DM-2 demonstrated a decrease in yield from 59.3 ksi to 32.3 ksi, a 46% reduction as well as a decrease in ductility from 10.3% to 0.7%, a 93% decrease. A scanning electron microscope evaluation showed both materials possessed a highly developed secondary phase surrounding the grain boundaries. The development and subsequent investigation of an alternative magnesium alloy, DM-3, showed semi-continuous secondary phases and was investigated for a substitute at a component level. While the ultimate tensile strength decreased minimally, the ductility decreased by 36%. Laboratory testing of the plug in identical conditions with the DM-3 slips was still successful. It is imperative for high temperature magnesium plug material selection to ensure the alloy does not have highly interconnected secondary phases which may cause sudden failure during field operation.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Chen, Weilong. « A Development of Virtual Manufacturing System for Magnesium High Pressure Die Casting Processes ». Dans ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-55228.

Texte intégral
Résumé :
In recent years, high-pressure die-casting magnesium components have been gaining currency worldwide because of the excellent properties that magnesium alloys can offer to meet new product requirements. With the increasing application of magnesium parts worldwide, many research and development projects have been carried out to advance HPDC technology. However, truly optimized mold design and production of defect free castings remains a challenge for die casters. For many HPDC magnesium products, especially those specified for porosity-free and high cosmetic requirement, the challenge not only comes form a lack of a deeper understanding of how molten magnesium alloys fill the mold cavity and form defects, but also from improper preliminary part design. This study proposes a virtual prototyping system that integrates several effective soft and hardware tools for both the part and mold-design engineer to evaluate part manufacturability. Also, investigated in this study are the major causes of those defects that are the predominant cause of rejection of thin walled, leak-free magnesium parts requiring highly cosmetic finishes.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Freni, Pierluigi, Paolo Tecchio, Sara Rollino et Bruno De Benedetti. « Porosity characterization of biomedical magnesium foams produced by Spark Plasma Sintering ». Dans 2014 IEEE International Symposium on Medical Measurements and Applications (MeMeA). IEEE, 2014. http://dx.doi.org/10.1109/memea.2014.6860052.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Wielage, B., K. Fleischer, R. Zenker et S. Schammer. « Nachbehandlung thermisch gespritzter Schichten auf Magnesiumwerkstoffen (Post-Treatment of Coatings Plasma-Sprayed Onto Magnesium Alloys) ». Dans ITSC 1999, sous la direction de E. Lugscheider et P. A. Kammer. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 1999. http://dx.doi.org/10.31399/asm.cp.itsc1999p0223.

Texte intégral
Résumé :
Abstract In this paper results of the alloying of magnesium materials by a combination of thermal spraying and a subsequent electron beam surface technology are presented. The objective is to improve the wear resistance of magnesium alloys. Aluminium and copper were chosen as the alloying material. These metals can form hard intermetallic compounds with magnesium, such as MgAl2 or Mg2Cu. The vacuum plasma spraying is well suited for the deposition of these additives because of the prevention of their oxidation. Besides, the EB technology take place under vacuum conditions, and the reactions between magnesium and oxygen are prevented. Paper text in German.
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Magnesium foam"

1

Rossiter, Walter J., et Robert G. Mathey. Magnesium oxychloride cement-based foam insulation :. Gaithersburg, MD : National Bureau of Standards, 1986. http://dx.doi.org/10.6028/nbs.ir.86-3326.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Rossiter, Walter J., et Paul W. Brown. An initial investigation of the properties and performance of magnesium oxychloride-based foam thermal insulation. Gaithersburg, MD : National Bureau of Standards, 1987. http://dx.doi.org/10.6028/nbs.ir.87-3642.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Fasoyinu, Yemi, et John A. Griffin. Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) : Lost Foam Thin Wall - Feasibility of Producing Lost Foam Castings in Aluminum and Magnesium Based Alloys. Office of Scientific and Technical Information (OSTI), mars 2014. http://dx.doi.org/10.2172/1131409.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Magnesium foam » pour d’autres types de sources :
Articles de revues
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie