Articles de revues sur le sujet « Machining sound »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Machining sound ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
Rafighi, Mohammad. « The cutting sound effect on the power consumption, surface roughness, and machining force in dry turning of Ti-6Al-4V titanium alloy ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science 236, no 6 (23 février 2022) : 3041–57. http://dx.doi.org/10.1177/09544062211072411.
Texte intégralAKKUŞ, HARUN. « MULTIPLE OPTIMIZATION ANALYSIS OF MRR, SURFACE ROUGHNESS, SOUND İNTENSITY, ENERGY CONSUMPTION, AND VIBRATION VALUES IN MACHINABILITY OF TC4 TITANIUM ALLOY ». Surface Review and Letters 28, no 09 (30 avril 2021) : 2150072. http://dx.doi.org/10.1142/s0218625x21500724.
Texte intégralDong, Quan Cheng, Chang Sheng Ai et Na Wang. « The Study of Tool Wear and Breakage Based on the Characteristic Analysis of Acoustic Spectrum ». Materials Science Forum 532-533 (décembre 2006) : 197–200. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.197.
Texte intégralYang, Xuefeng, Xulin Cai, Wenan Yang et Youpeng You. « Novel Tool Path Generation Method for Pocket Machining Using Sound Field Synthesis Theory ». Machines 11, no 2 (18 janvier 2023) : 131. http://dx.doi.org/10.3390/machines11020131.
Texte intégralSun, Meng Zi, Fei Huang et Hua Jing Li. « The Influence of Structural Parameters on the Sound Absorption Performance of Micro Perforated Absorber ». Applied Mechanics and Materials 701-702 (décembre 2014) : 424–27. http://dx.doi.org/10.4028/www.scientific.net/amm.701-702.424.
Texte intégralZajac, Jozef, Zuzana Hutyrová et Imrich Orlovský. « Investigation of Surface Roughness after Turning of One Kind of the Bio-Material with Thermoplastic Matrix and Natural Fibers ». Advanced Materials Research 941-944 (juin 2014) : 275–79. http://dx.doi.org/10.4028/www.scientific.net/amr.941-944.275.
Texte intégralBhandari, Binayak. « Comparative Study of Popular Deep Learning Models for Machining Roughness Classification Using Sound and Force Signals ». Micromachines 12, no 12 (29 novembre 2021) : 1484. http://dx.doi.org/10.3390/mi12121484.
Texte intégralHao, Wangs Shen, Xun Sheng Zhu, Biao Jun Tian et M. R. Chi. « Autoregressive Spectrum Analysis of Vibration and Condition Monitoring of Self-Propelled Rotary Tool ». Key Engineering Materials 329 (janvier 2007) : 743–48. http://dx.doi.org/10.4028/www.scientific.net/kem.329.743.
Texte intégralMiyazaki, T., Y. Tanaka, T. Tokunaga et N. Taniguchi. « Controlling of Q-Switched YAG Laser Beam Machining by Generated Sound ». CIRP Annals 42, no 1 (1993) : 243–46. http://dx.doi.org/10.1016/s0007-8506(07)62435-4.
Texte intégralCasal-Guisande, Manuel, Alberto Comesaña-Campos, Alejandro Pereira, José-Benito Bouza-Rodríguez et Jorge Cerqueiro-Pequeño. « A Decision-Making Methodology Based on Expert Systems Applied to Machining Tools Condition Monitoring ». Mathematics 10, no 3 (6 février 2022) : 520. http://dx.doi.org/10.3390/math10030520.
Texte intégralLiu, Zhan Feng, et Ya Zhou Feng. « Design and Research of Amplitude Transformer in Ultrasonic Vibration Drilling System ». Advanced Materials Research 139-141 (octobre 2010) : 852–56. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.852.
Texte intégralBarylski, Adam, et Piotr Sender. « The Proposition of an Automated Honing Cell with Advanced Monitoring ». Machines 8, no 4 (28 octobre 2020) : 70. http://dx.doi.org/10.3390/machines8040070.
Texte intégralСорокоумова, Дина, Dina Sorokoumova, Сергей Григорьев, Sergey Griroriev, Ксения Лаптева, Ksenia Lapteva, Дарья Шабалина et al. « COMPARATIVE ASSESSMENT OF EFFICIENCY ULTRASONIC AND SOUND METHODS OF ACTIVATION IRRIGATIONAL SOLUTION IN ROOT CHANNELS WITH SIMPLE AND DIFFICULT ANATOMY (PILOT STUDY) ». Actual problems in dentistry 15, no 1 (6 mai 2019) : 57–62. http://dx.doi.org/10.18481/2077-7566-2019-15-1-57-62.
Texte intégralPinheiro, Cleverson, Manoel Cléber de Sampaio Alves et Simone Simões Amaral. « Moisture Content and its Influence on the Roughness and Noise Emission during Wood Machining ». Advanced Materials Research 1088 (février 2015) : 680–85. http://dx.doi.org/10.4028/www.scientific.net/amr.1088.680.
Texte intégralZhan, Jian Ming, Zhi Qiang Cao, Ming Ming Wu et Jian Bo Zhang. « Compliant Control at Micro-Displacement in Hydrodynamic Suspension Ultra-Smooth Machining ». Advanced Materials Research 53-54 (juillet 2008) : 33–38. http://dx.doi.org/10.4028/www.scientific.net/amr.53-54.33.
Texte intégralNahornyi, Volodymyr, Anton Panda, Jan Valíček, Marta Harničárová, Milena Kušnerová, Iveta Pandová, Stanislaw Legutko, Zuzana Palková et Ondrej Lukáč. « Method of Using the Correlation between the Surface Roughness of Metallic Materials and the Sound Generated during the Controlled Machining Process ». Materials 15, no 3 (21 janvier 2022) : 823. http://dx.doi.org/10.3390/ma15030823.
Texte intégralLee, Jun-Seok, et Dongjoon Kong. « Optimizing Alarm Location and Effects of Hearing Protection for Machining Industries ». Proceedings of the Human Factors and Ergonomics Society Annual Meeting 49, no 17 (septembre 2005) : 1610–14. http://dx.doi.org/10.1177/154193120504901724.
Texte intégralSvrzic, Srdjan, Marija Djurkovic, Gradimir Danon, Mladen Furtula et Damjan Stanojevic. « On acoustic emission analysis in circular saw cutting beech wood with respect to power consumption and surface roughness ». BioResources 16, no 4 (25 octobre 2021) : 8239–57. http://dx.doi.org/10.15376/biores.16.4.8239-8257.
Texte intégralTakahashi, Haruka, Katsuhiko Sakai et Hiroo Shizuka. « Development of an In Situ Tool Wear Monitoring System Using the Cutting Sound ». Advanced Materials Research 1117 (juillet 2015) : 277–80. http://dx.doi.org/10.4028/www.scientific.net/amr.1117.277.
Texte intégralJia, Jian Li, Jin He Liu et Sha Sha Meng. « Design on ECM Device of Engine Connecting Rod Hot-Forging Die ». Advanced Materials Research 411 (novembre 2011) : 307–10. http://dx.doi.org/10.4028/www.scientific.net/amr.411.307.
Texte intégralHuang, X. Z., Zhong Ning Guo, Zhi Gang Huang, Q. H. Li, Z. Q. Yu, T. M. Yue et Wing Bun Lee. « Study of Ultrasonic Field in Polishing Based on Coupling Vibrations of Liquid ». Key Engineering Materials 364-366 (décembre 2007) : 967–72. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.967.
Texte intégralAi, Chang Sheng, Y. J. Sun et G. W. He. « Tool Wear Monitoring Based on Milling Acoustic Spectrum LPCC ». Key Engineering Materials 499 (janvier 2012) : 353–58. http://dx.doi.org/10.4028/www.scientific.net/kem.499.353.
Texte intégralAHN, Jung Hwan, Han Seog LIM, Shozo TAKATA et Toshio SATA. « Machining Process/Tool Wear Monitoring System Based on Real-time Sound Recognition. » Journal of the Japan Society for Precision Engineering 60, no 8 (1994) : 1144–48. http://dx.doi.org/10.2493/jjspe.60.1144.
Texte intégralGok, Arif, Cevdet Gologlu, Ibrahim H. Demirci et Mustafa Kurt. « Determination of Surface Qualities on Inclined Surface Machining with Acoustic Sound Pressure ». Strojniški vestnik – Journal of Mechanical Engineering 58, no 10 (15 octobre 2012) : 587–97. http://dx.doi.org/10.5545/sv-jme.2012.352.
Texte intégralTakata, S., J. H. Ahn, M. Miki, Y. Miyao et T. Sata. « A Sound Monitoring System for Fault Detection of Machine and Machining States ». CIRP Annals 35, no 1 (1986) : 289–92. http://dx.doi.org/10.1016/s0007-8506(07)61890-3.
Texte intégralNishibori, K., et Z. Ishikawa. « Development of Equipment for Detection of Unusual Sound Generated in Machining Center ». Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) 2003 (2003) : 65. http://dx.doi.org/10.1299/jsmermd.2003.65_4.
Texte intégralLiu, Xiaolong, Hongbing Li, Ning Li et Kaizhuo Lei. « Effect of the Sound Source Position Error on Distribution Characteristics of Underwater Shock Wave Bunching Sound Field ». Mathematical Problems in Engineering 2021 (14 juillet 2021) : 1–8. http://dx.doi.org/10.1155/2021/1050680.
Texte intégralSánchez, Jose Antonio, Luis Norberto López de Lacalle et Aitzol Lamikiz. « Design of Optimum Planetary Electro Discharge Machining Strategies ». Materials Science Forum 526 (octobre 2006) : 67–72. http://dx.doi.org/10.4028/www.scientific.net/msf.526.67.
Texte intégralRosentel, William. « Machining and Fabrication Equipment in Workplaces ». INTER-NOISE and NOISE-CON Congress and Conference Proceedings 263, no 1 (1 août 2021) : 5433–42. http://dx.doi.org/10.3397/in-2021-3102.
Texte intégralWu, Q., E. Liu, Y. H. He et X. Tang. « Application Research on Extreme Learning Machine in Rapid Detection of Tool Wear in Machine Tools ». Journal of Physics : Conference Series 2025, no 1 (1 septembre 2021) : 012091. http://dx.doi.org/10.1088/1742-6596/2025/1/012091.
Texte intégralPatwari, Md Anayet Ullah, Md Shariful Islam Chowdhury, Mohammad Ahsan Habib, Afzal Hossain Neelav, Md Sharfat Latif et T. M. Moniruzzaman Sunny. « Tool Life Improvement by Externally Applied Ultrasonic Waves in Cutting Process of Dry Turning Operation of Mild Steel ». Applied Mechanics and Materials 860 (décembre 2016) : 58–63. http://dx.doi.org/10.4028/www.scientific.net/amm.860.58.
Texte intégralAlatorre, David, Amir Rabani, Dragos Axinte et David T. Branson. « Closed loop force control of in-situ machining robots using audible sound features ». Mechanical Systems and Signal Processing 136 (février 2020) : 106517. http://dx.doi.org/10.1016/j.ymssp.2019.106517.
Texte intégralFrigieri, Edielson P., Carlos A. Ynoguti et Anderson P. Paiva. « Correlation analysis among audible sound emissions and machining parameters in hardened steel turning ». Journal of Intelligent Manufacturing 30, no 4 (17 août 2017) : 1753–64. http://dx.doi.org/10.1007/s10845-017-1356-9.
Texte intégralSADAMOTO, Akira, Takashi YAMAGUCHI, Shigeru NAGASAWA, Yasushi FUKUZAWA, Daishiro YAMAGUCHI et Isamu KATAYAMA. « Sensing for Machining Using Pressure Level of Sound Radiated by Paperboard Die Cutting. » Journal of the Japan Society for Precision Engineering 68, no 12 (2002) : 1554–58. http://dx.doi.org/10.2493/jjspe.68.1554.
Texte intégralWang, Z. W., G. Q. Pan et Dong Hui Wen. « Applications of Ultrasonic Radiation Forces ». Advanced Materials Research 215 (mars 2011) : 259–62. http://dx.doi.org/10.4028/www.scientific.net/amr.215.259.
Texte intégralHuang, Pao-Ming, et Ching-Hung Lee. « Estimation of Tool Wear and Surface Roughness Development Using Deep Learning and Sensors Fusion ». Sensors 21, no 16 (7 août 2021) : 5338. http://dx.doi.org/10.3390/s21165338.
Texte intégralChakraborty, Shankar, Partha Protim Das et Vidyapati Kumar. « Application of grey-fuzzy logic technique for parametric optimization of non-traditional machining processes ». Grey Systems : Theory and Application 8, no 1 (5 février 2018) : 46–68. http://dx.doi.org/10.1108/gs-08-2017-0028.
Texte intégralNúñez López, Pedro Jose, Eustaquio García Plaza, Angel Ramon Martín et A. Egido. « An Integrated Methodology for the Teaching of Computer Aided Tools for Automated Machining ». Materials Science Forum 692 (juillet 2011) : 8–15. http://dx.doi.org/10.4028/www.scientific.net/msf.692.8.
Texte intégralZhang, Qin He, Ru Du, Jian Hua Zhang, J. Y. Yang et Sheng Feng Ren. « The Mechanism of Ultrasonic Vibration Improving MRR in UEDM in Gas ». Materials Science Forum 471-472 (décembre 2004) : 741–45. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.741.
Texte intégralMIYAZAKI, Toshiyuki, et Yoshihiro TANAKA. « Frequency of generated sound and material removal characteristics in Q-switched YAG laser machining. » Journal of the Japan Society for Precision Engineering 55, no 8 (1989) : 1421–25. http://dx.doi.org/10.2493/jjspe.55.1421.
Texte intégralPrakash, M., et PVS Dileep Aditya Dhar. « Investigation on the effect of drilling parameters on the tool wear and delamination of glass fibre-reinforced polymer composite using vibration signal analysis ». Journal of Composite Materials 52, no 12 (29 août 2017) : 1641–48. http://dx.doi.org/10.1177/0021998317728109.
Texte intégralKovacevic, R., M. Hashish, R. Mohan, M. Ramulu, T. J. Kim et E. S. Geskin. « State of the Art of Research and Development in Abrasive Waterjet Machining ». Journal of Manufacturing Science and Engineering 119, no 4B (1 novembre 1997) : 776–85. http://dx.doi.org/10.1115/1.2836824.
Texte intégralChouchaoui, Ben, Joe Joe Gutierrez, Vince Mungioli et Kassem Ghanem. « Machining Versus Molding Tolerances in Manufacturing Automotive Sealing Systems ». Scientific Review, no 510 (25 octobre 2019) : 179–84. http://dx.doi.org/10.32861/sr.510.179.184.
Texte intégralMishra, Dileep Kumar, ▪. Rahul, Saurav Datta, Manoj Masanta et Siba Sankar Mahapatra. « Through hole making by electro-discharge machining on Inconel 625 super alloy using hollow copper tool electrode ». Proceedings of the Institution of Mechanical Engineers, Part E : Journal of Process Mechanical Engineering 233, no 2 (27 juin 2018) : 348–70. http://dx.doi.org/10.1177/0954408918784701.
Texte intégralFiala, Zdenek, Miroslav Piska et Ales Jaros. « ON THE ANALYSIS OF THE SOUND SPECTRUM AT MACHINING OF THE GLASS-POLYESTER COMPOSITE MATERIAL ». MM Science Journal 2014, no 01 (11 mars 2014) : 459–62. http://dx.doi.org/10.17973/mmsj.2014_03_201403.
Texte intégralLee, Cheng-Hsiung, Jung-Sing Jwo, Han-Yi Hsieh et Ching-Sheng Lin. « An Intelligent System for Grinding Wheel Condition Monitoring Based on Machining Sound and Deep Learning ». IEEE Access 8 (2020) : 58279–89. http://dx.doi.org/10.1109/access.2020.2982800.
Texte intégralYang, Xiaocui, Liang Chen, Xinmin Shen, Panfeng Bai, Sandy To, Xiaonan Zhang et Zhizhong Li. « Optimization of geometric parameters of the standardized multilayer microperforated panel with finite dimension ». Noise Control Engineering Journal 67, no 3 (1 mai 2019) : 197–209. http://dx.doi.org/10.3397/1/376718.
Texte intégralMohamedosman Elyass, Waddah, Vishal Sharma, Ganesh Kantak et Mohd Mukhtar Alam. « Performance Investigation of Wire EDM Process Parameters ». IOP Conference Series : Materials Science and Engineering 1224, no 1 (1 janvier 2022) : 012001. http://dx.doi.org/10.1088/1757-899x/1224/1/012001.
Texte intégralDobrotvorskiy, Sergey, Yevheniia Basova, Oleksandr Kharchenko, Valerii Letiuk, Ihor Yakovenko, Alexey Kotliar et Samra Youssef Mounif Abou. « DETERMINATION OF THE FEATURES OF THE SHAPE AND VIBRATION FREQUENCY OF TURBINE BLADES ON DIGITAL MODELS ». Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series : Techniques in a machine industry, no 2 (27 septembre 2022) : 117–23. http://dx.doi.org/10.20998/2079-004x.2022.2(6).16.
Texte intégralLi, Min, Lanrong Cai et Junling Zhao. « Research on discharge characteristics of working mediums of electric discharge machining ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture 235, no 1-2 (20 août 2020) : 34–40. http://dx.doi.org/10.1177/0954405420951093.
Texte intégral