Littérature scientifique sur le sujet « Localized and distributed loading »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Localized and distributed loading ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Localized and distributed loading"
Fazzolari, Fiorenzo A., et Puxue Tan. « A Linearised Hybrid FE-SEA Method for Nonlinear Dynamic Systems Excited by Random and Harmonic Loadings ». Vibration 3, no 3 (17 septembre 2020) : 304–19. http://dx.doi.org/10.3390/vibration3030021.
Texte intégralTalone, Candida, Radoslav Sovják, Michal Mára et Jindřich Fornůsek. « Post-impact flexural capacity of UHPFRC plates ». MATEC Web of Conferences 352 (2021) : 00006. http://dx.doi.org/10.1051/matecconf/202135200006.
Texte intégralLiu, Sufan, et Bo Li. « Design of 3D-printed metal micro-truss porous configurations with geometric inhomogeneity ». Journal of Physics : Conference Series 2383, no 1 (1 décembre 2022) : 012026. http://dx.doi.org/10.1088/1742-6596/2383/1/012026.
Texte intégralChiu, Yi-Jui, Sheng-Rui Jian, Ti-Ju Liu, Phuoc Le et Jenh-Yih Juang. « Localized Deformation and Fracture Behaviors in InP Single Crystals by Indentation ». Micromachines 9, no 12 (22 novembre 2018) : 611. http://dx.doi.org/10.3390/mi9120611.
Texte intégralMa, Shao Peng, Lai Gui Wang et Guan Chang Jin. « Damage Evolution Inspection of Rock Using Digital Speckle Correlation Method (DSCM) ». Key Engineering Materials 326-328 (décembre 2006) : 1117–20. http://dx.doi.org/10.4028/www.scientific.net/kem.326-328.1117.
Texte intégralZHAO, GUIPING, SANG-KYO LEE et CHONGDU CHO. « EFFECT OF COMPRESSIVE RESIDUAL STRESS INDUCED DURING FABRICATING PROCESS IN THE CORE OF CLAMPED SANDWICH PLATE UNDER SHOCK LOADING ». International Journal of Modern Physics B 22, no 09n11 (30 avril 2008) : 1195–200. http://dx.doi.org/10.1142/s0217979208046530.
Texte intégralXu, Y. G., W. Tiu et Y. Z. Xu. « Numerical Simulation of Crack Tip Behavior under Fatigue Loading ». Key Engineering Materials 525-526 (novembre 2012) : 517–20. http://dx.doi.org/10.4028/www.scientific.net/kem.525-526.517.
Texte intégralCarrera, Erasmo, et Gaetano Giunta. « Hierarchical models for failure analysis of plates bent by distributed and localized transverse loadings ». Journal of Zhejiang University-SCIENCE A 9, no 5 (mai 2008) : 600–613. http://dx.doi.org/10.1631/jzus.a072110.
Texte intégralBailey, R. T., M. Ahmadi, T. K. Gates et M. Arabi. « Spatially-distributed influence of agro-environmental factors governing nitrate fate and transport in an irrigated stream-aquifer system ». Hydrology and Earth System Sciences Discussions 12, no 2 (4 février 2015) : 1653–96. http://dx.doi.org/10.5194/hessd-12-1653-2015.
Texte intégralToribio, Jesús, Miguel Lorenzo et Leticia Aguado. « Innovative Design of Residual Stress and Strain Distributions for Analyzing the Hydrogen Embrittlement Phenomenon in Metallic Materials ». Materials 15, no 24 (19 décembre 2022) : 9063. http://dx.doi.org/10.3390/ma15249063.
Texte intégralThèses sur le sujet "Localized and distributed loading"
Jeffrey, Holly K. « Response of grooved composites to transversely distributed and localized spherical contact loadings ». Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/63040.
Texte intégralCataloged from PDF version of thesis.
Includes bibliographical references (p. 133-135).
The response of a grooved composite specimen to two contact loading situations is studied; load applied via a transversely oriented cylindrical indenter and via a localized spherical ball-ended indenter. The philosophy of the Building Block Approach is used to develop these tests in the current study in that the cylindrical indenter creates a "two-dimensional loading" (transversely distributed) case, and the spherical indenter adds complexity to the system and creates a "three-dimensional loading" (localized spherical) case. The final failure and initial permanent deformation, in the form of crushing, is investigated, along with the effect of laminate configurations and ply angles. The is done by using the two indenters, six different laminates, and two types of tests to study the grooved composite specimens, 1 inch wide by 2 inches long, of 78 to 80 plies. This work uses a specimen configuration and testing technique developed in previous work. A computed microtomography technique is used to examine select specimens to ascertain the extent of the internal damage. Specimens subjected to the "two-dimensional loading" case exhibit four Behavior Types of the load-stroke response. Several aspects of the response are used to characterize the Behavior Types, including initial linear regions, knee loads, reverse knee loads, second linear regions, and changes in slopes. The responses of the two loading cases indicate that the details of the laminate play a significant role in the load-stroke response for the "two-dimensional loading" case, whereas the details of the loading play a more significant role for the "three-dimensional loading" where only one type of load-stroke behavior is generally displayed. In the "three-dimensional loading" case, significant crushing occurs which is not seen in the "two-dimensional loading" case. This is visible due to the localized loading for the "three-dimensional loading" case, and impacts the overall load-stroke response. The 900 plies, in addition to the "mesh" created by the ply angles in the laminate, and the "ply angle mismatch" within a laminate, affect the ability of the laminate to resist indentation and the load-stroke response. Recommendations for further work are presented.
by Holly K. Jeffrey.
S.M.
Mack, Moritz. « Loading and Querying Data on Distributed Virtualized Web Application Servers ». Thesis, Uppsala University, Department of Information Technology, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-108039.
Texte intégralVirtualized web application servers within computational clouds, such as the GoogleApp Engine, generally restrict resource usage and therefore provide limited,relationally none-complete query facilities only. This work investigates how scalable,reliable and a more powerful access to the App Engine Datastore can beaccomplished and an Optimized Distributed Datastore Exchange (ODDSE) ispresented. Being aware of the App Engine’s resource restrictions ODDSE provides areliable and failure safe query interface to transparently exchange data with thedistributed Datastore using full SQL or AmosQL. ODDSE therefore wraps Datastorerelations and utilizes the extensible database system Amos II to compensate formissing query facilities in Google’s relationally none-complete query language GQL.Under the covers ODDSE furthermore implements an adaptive and reliablemanagement of interactions with App Engine servers. For scalability and highperformance the interaction is parallelized and continuously adapted. Theperformance of ODDSE is evaluated and compared to a similar system showing itsconsiderably good results for both bulk uploading and query processing.
Carlo, Gilles. « Dynamic loading and class management in a distributed actor system ». Master's thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-04272010-020040/.
Texte intégralYu, Haoxiang. « A Comprehensive System for Dynamic and Distributed Taxi Ride-Sharing via Localized Communication ». Miami University / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=miami1619182334243885.
Texte intégralIzquierdo-Roman, Alondra. « Localized Mechanical Compression as a Technique for the Modification of Biological Tissue Optical Properties ». Thesis, Virginia Tech, 2011. http://hdl.handle.net/10919/76856.
Texte intégralMaster of Science
Gallagher, Chad Taylor. « Acoustic Response Validation of a Finite Cylindrical Shell with Multiple Loading Conditions ». Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/83761.
Texte intégralMaster of Science
Saloustros, Savvas. « Tracking localized cracks in the computational analysis of masonry structures ». Doctoral thesis, Universitat Politècnica de Catalunya, 2017. http://hdl.handle.net/10803/461714.
Texte intégralLos métodos numéricos son decisivos en la ingeniería para la conservación de estructuras de mampostería existentes y el diseño de estructuras nuevas. Entre ellos, los métodos macro-mecánicos de elementos finitos, basados en el concepto de fisuras distribuidas, son habitualmente los preferidos como opción asequible para el análisis de grandes estructuras de mampostería. Sin embargo, suelen resultar en a una representación poco realista del daño, distribuido en grandes áreas de la estructura, lo que impide la correcta interpretación del patrón de daño. Además, esta metodología presenta una patología más crítica, la dependencia de la malla, que influye notablemente en las predicciones de seguridad y estabilidad. Para superar estas limitaciones, esta tesis propone una nueva herramienta numérica basada en el enriquecimiento del clásico enfoque de fisuras distribuidas con un algoritmo de trazado local. El objetivo de este modelo de daño localizado es el análisis no-lineal de las estructuras de mampostería de manera realista y eficiente con una representación mejora-da de fisuras. El comportamiento no lineal de la mampostería se simula a través de la adopción de un modelo de mecánica de daño continuo con dos índices de daño, permitiendo la diferenciación entre las respuestas mecánicas de tensión y compresión de la mampostería. En este contexto, se propone e implementa una nueva formulación explícita para la evolución de deformaciones irreversibles. Se derivan dos nuevas expresiones para la regularización del ablandamiento de tracción y compresión según el ancho de banda de la fisura, garantizan-do la objetividad del modelo de daño al respecto del tamaño de la malla. La simulación del comportamiento estructural de las estructuras de mampostería en condiciones de carga y contorno generales precisa de algunos desarrollos en el contexto de los algoritmos locales de trazado. Con este objetivo, se presenta la mejora de los algoritmos locales de trazado con nuevos procedimientos que posibilitan la simulación de fisuración múltiple, arbitraria e secante bajo cargas monótonas y cíclicas. Además, se investiga el efecto de diferentes criterios de propagación de fisuras y se aborda la selección entre más de un plano de falla posible. El modelo de daño localizado propuesto se valida mediante la simulación de una serie de ejemplos estructurales. Éstos van desde pruebas a pequeña escala en probetas de hormigón, con pocas fisuras dominantes, hasta estructuras de mampostería de mediana y gran escala con fisuración múltiple de tracción, de cortante y de flexión. Los análisis se comparan con los resultados analíticos, experimentales y numéricos obtenidos con métodos alternativos disponibles en la literatura. El modelo de daño localizado mejora en gran medida la independencia de la malla del clásico método de fisuras distribuidas y reproduce patrones de daño y mecanismos de colapso de una manera eficiente y realista
Liu, Yuan. « Studies on Designing Distributed and Cooperative Systems for Solving Constraint Satisfaction Problems of Container Loading ». 京都大学 (Kyoto University), 2008. http://hdl.handle.net/2433/57262.
Texte intégralVu, Chinh Trung. « An Energy-Efficient Distributed Algorithm for k-Coverage Problem in Wireless Sensor Networks ». Digital Archive @ GSU, 2007. http://digitalarchive.gsu.edu/cs_theses/40.
Texte intégralMokhtari, Ghassem. « Smart resource control in distribution network to improve the integration level of PV ». Thesis, Queensland University of Technology, 2014. https://eprints.qut.edu.au/72235/1/Ghassem_Mokhtari_Thesis.pdf.
Texte intégralLivres sur le sujet "Localized and distributed loading"
Valis, Tomas. Localized and distributed fiber-optic strain sensors embedded in composite materials. [Downsview, Ont.] : University of Toronto, 1991.
Trouver le texte intégralValis, Tomas. Localized and distributed fiber-optic strain sensors embedded in composite materials. [Downsview, Ont.] : Institute for Aerospace Studies, University of Toronto, 1992.
Trouver le texte intégralCenter, Langley Research, dir. Localized and distributed boundary-layer receptivity to convected unsteady wake in free stream. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1994.
Trouver le texte intégralThomas, Basso, California Energy Commission. Public Interest Energy Research., Northern Power Systems Inc, Virginia Polytechnic Institute and State University. et National Renewable Energy Laboratory (U.S.), dir. Modeling and testing of unbalanced loading and voltage regulation : PIER final project report. [Sacramento, Calif.] : California Energy Commission, 2009.
Trouver le texte intégralThomas, Basso, California Energy Commission. Public Interest Energy Research., Northern Power Systems Inc, Virginia Polytechnic Institute and State University. et National Renewable Energy Laboratory (U.S.), dir. Modeling and testing of unbalanced loading and voltage regulation : PIER final project report. [Sacramento, Calif.] : California Energy Commission, 2009.
Trouver le texte intégralValis, Tomas *. Localized and distributed fiber-optic strain sensors embedded in composite materials. 1991.
Trouver le texte intégralApplication of the mobility power flow approach to structural response from distributed loading. [Boca Raton] : Florida Atlantic University, College of Engineering, Dept. of Ocean Engineering, Center for Acoustics and Vibrations, 1988.
Trouver le texte intégralMobility power flow analysis of an L-shaped plate structure subjected to distributed loading. [Washington, D.C : National Aeronautics and Space Administration, 1990.
Trouver le texte intégralHodges, John R. Testing Cognitive Function at the Bedside. Oxford University Press, 2013. http://dx.doi.org/10.1093/med/9780192629760.003.0005.
Texte intégralComtet1, Alain, et Yves Tourigny2. Impurity models and products of random matrices. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198797319.003.0011.
Texte intégralChapitres de livres sur le sujet "Localized and distributed loading"
Ugrimov, Sergey, Natalia Smetankina et Vladislav Kobylnik. « Modeling the Response of Multilayer Glazing to Distributed and Localized Force Loading ». Dans Advanced Structured Materials, 103–23. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75890-5_7.
Texte intégralAgrawal, D., et A. Abbadi. « Localized-access protocols for replicated databases ». Dans Distributed Algorithms, 245–62. Berlin, Heidelberg : Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/3-540-54099-7_17.
Texte intégralBabin, Anatoli, et Alexander Figotin. « Dipole Approximation for Localized Distributed Charges ». Dans Neoclassical Theory of Electromagnetic Interactions, 101–5. London : Springer London, 2016. http://dx.doi.org/10.1007/978-1-4471-7284-0_5.
Texte intégralMathews, Emi, et Hannes Frey. « A Localized Link Removal and Addition Based Planarization Algorithm ». Dans Distributed Computing and Networking, 337–50. Berlin, Heidelberg : Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-25959-3_25.
Texte intégralChen, Arbee L. P. « A localized approach to distributed query processing ». Dans Lecture Notes in Computer Science, 188–202. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/bfb0022171.
Texte intégralChung, Sung Woo, et Kevin Skadron. « A Novel Software Solution for Localized Thermal Problems ». Dans Parallel and Distributed Processing and Applications, 63–74. Berlin, Heidelberg : Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11946441_11.
Texte intégralDimitriou, Tassos, et Athanassios Giannetsos. « Wormholes No More ? Localized Wormhole Detection and Prevention in Wireless Networks ». Dans Distributed Computing in Sensor Systems, 334–47. Berlin, Heidelberg : Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13651-1_24.
Texte intégralWu, Jie. « Localized Algorithms and Their Applications in Ad Hoc Wireless Networks ». Dans Parallel and Distributed Processing and Applications, 1–5. Berlin, Heidelberg : Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/3-540-37619-4_1.
Texte intégralSchäfer, Andreas, Jürgen Olbricht et Martin F. X. Wagner. « Monitoring Localized Deformation of Pseudoelastic NiTi Subjected to Uniaxial Loading ». Dans ICOMAT, 537–42. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118803592.ch78.
Texte intégralPerzyna, Piotr. « Micromechanics of Localized Fracture in Inelastic Solids under Dynamic Loading Processes ». Dans IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials, 131–40. Dordrecht : Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-1756-9_17.
Texte intégralActes de conférences sur le sujet "Localized and distributed loading"
Wheeler, Robert, Judy Santa-Cruz, Darren Hartl et Dimitris Lagoudas. « Effect of Processing and Loading on Equiatomic NiTi Fatigue Life and Localized Failure Mechanisms ». Dans ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3163.
Texte intégralWan, Li, Wei-ming Tao, Xin-xin Wu et Shu-yan He. « The Influence of Initial Geometric Imperfection on the Localized Buckling of Pressure Vessel Under Internal Pressure ». Dans 12th International Conference on Nuclear Engineering. ASMEDC, 2004. http://dx.doi.org/10.1115/icone12-49397.
Texte intégralChen, Boyang, Simon Jones et Matt Riley. « Stochastic Finite Element Modeling of Laminated Fiber-Reinforced Composite Beams Under Transverse Loading ». Dans ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-69851.
Texte intégralRapp, Christopher T., J. Riley Edwards, Marcus S. Dersch, Christopher P. L. Barkan, Jose Mediavilla et Brent M. Wilson. « Measuring Concrete Crosstie Rail Seat Pressure Distribution With Matrix Based Tactile Surface Sensors ». Dans 2012 Joint Rail Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/jrc2012-74092.
Texte intégralSadeghnejad, Soroush, Mojtaba Sadighi et Abdolreza Ohadi Hamedani. « An Extended Higher-Order Free Vibration Analysis of Composite Sandwich Beam With Viscoelastic Core ». Dans ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/esda2012-82686.
Texte intégralSokovikov, M., V. Chudinov, V. Oborin, S. Uvarov et O. Naimark. « Investigation of localized plastic shear mechanisms under dynamic loading ». Dans MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2018) : Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Author(s), 2018. http://dx.doi.org/10.1063/1.5084429.
Texte intégralLi, Xuyang, Talal Salem, Hamed Bolandi, Vishnu Boddeti et Nizar Lajnef. « Methods for the Rapid Detection of Boundary Condition Variations in Structural Systems ». Dans ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/smasis2022-90377.
Texte intégralMotee, Nader, et Qiyu Sun. « Localized stability certificates for spatially distributed systems ». Dans 2016 IEEE 55th Conference on Decision and Control (CDC). IEEE, 2016. http://dx.doi.org/10.1109/cdc.2016.7798460.
Texte intégralNanda, S., et D. Kotz. « Localized Bridging Centrality for Distributed Network Analysis ». Dans 17th International Conference on Computer Communications and Networks 2008. IEEE, 2008. http://dx.doi.org/10.1109/icccn.2008.ecp.31.
Texte intégralXingyan Jiang, Yuanzhu Peter Chen et Tina Yu. « Localized distributed sensor deployment via coevolutionary computation ». Dans 2008 Third International Conference on Communications and Networking in China (CHINACOM). IEEE, 2008. http://dx.doi.org/10.1109/chinacom.2008.4685141.
Texte intégralRapports d'organisations sur le sujet "Localized and distributed loading"
Quinn, Meghan. Geotechnical effects on fiber optic distributed acoustic sensing performance. Engineer Research and Development Center (U.S.), juillet 2021. http://dx.doi.org/10.21079/11681/41325.
Texte intégralTrim, M., Matthew Murray et C. Crane. Modernization and structural evaluation of the improved Overhead Cable System. Engineer Research and Development Center (U.S.), mars 2021. http://dx.doi.org/10.21079/11681/40025.
Texte intégralChristopher, David A., et Avihai Danon. Plant Adaptation to Light Stress : Genetic Regulatory Mechanisms. United States Department of Agriculture, mai 2004. http://dx.doi.org/10.32747/2004.7586534.bard.
Texte intégral