Littérature scientifique sur le sujet « Liquid water ratio »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Liquid water ratio ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Liquid water ratio"
Silvestrelli, Pier Luigi. « Transport properties in liquids from first-principles : The case of liquid water and liquid argon ». Journal of Chemical Physics 158, no 13 (7 avril 2023) : 134503. http://dx.doi.org/10.1063/5.0144353.
Texte intégralK . Harweel, Cecelia, et Asseel M. Rasheed. « Drop Interface Coalescence in Liquid-Liquid System ». Iraqi Journal of Chemical and Petroleum Engineering 8, no 1 (30 mars 2007) : 35–42. http://dx.doi.org/10.31699/ijcpe.2007.1.5.
Texte intégralOsundare, Olusegun Samson, Gioia Falcone, Liyun Lao et Alexander Elliott. « Liquid-Liquid Flow Pattern Prediction Using Relevant Dimensionless Parameter Groups ». Energies 13, no 17 (24 août 2020) : 4355. http://dx.doi.org/10.3390/en13174355.
Texte intégralFernandez, Federico, et Robert M. Quigley. « Hydraulic conductivity of natural clays permeated with simple liquid hydrocarbons ». Canadian Geotechnical Journal 22, no 2 (1 mai 1985) : 205–14. http://dx.doi.org/10.1139/t85-028.
Texte intégralZakaria, Z. N., M. S. Sanordi et M. S. Laili. « Intensity Ratio Distribution in Different Dielectric Liquids using Kerr Effect Method ». Journal of Physics : Conference Series 2550, no 1 (1 août 2023) : 012023. http://dx.doi.org/10.1088/1742-6596/2550/1/012023.
Texte intégralKim, Gyu Hyun, Sung Hyuk Cho, Ji Hye Han, Young Bang Lee, Chi Hyeong Roh, Kwon Hong et Sung Ki Park. « Effect of Drying Liquid on Stiction of High Aspect Ratio Structures ». Solid State Phenomena 187 (avril 2012) : 75–78. http://dx.doi.org/10.4028/www.scientific.net/ssp.187.75.
Texte intégralKu Ishak, Ku Esyra Hani, et Mohammed Abdalla Ayoub. « Performance of liquid–liquid hydrocyclone (LLHC) for treating produced water from surfactant flooding produced water ». World Journal of Engineering 17, no 2 (2 décembre 2019) : 215–22. http://dx.doi.org/10.1108/wje-01-2019-0003.
Texte intégralSaleh, Noorashikin Md, N. M. Hafiz et Nik Nur Atiqah NikWee. « Determination of Parabens from Water Samples Using Cloud Point Extraction, Vortex Extraction and Liquid–Liquid Extraction Method Coupled with High Performance Liquid Chromatography ». Journal of Computational and Theoretical Nanoscience 17, no 2 (1 février 2020) : 765–72. http://dx.doi.org/10.1166/jctn.2020.8717.
Texte intégralKwak, Moon Kyu, Cheol Woo Park, Kwang-Il Hwang, Choon Man Park, Hoon Eui Jeong et Jun Ho Choi. « Extreme hydrophobicity and omniphilicity of high-aspect-ratio silicon structures ». Modern Physics Letters B 29, no 06n07 (20 mars 2015) : 1540009. http://dx.doi.org/10.1142/s0217984915400096.
Texte intégralOropeza-Vazquez, C., E. Afanador, L. Gomez, S. Wang, R. Mohan, O. Shoham et G. Kouba. « Oil-Water Separation in a Novel Liquid-Liquid Cylindrical Cyclone (LLCC©) Compact Separator—Experiments and Modeling ». Journal of Fluids Engineering 126, no 4 (1 juillet 2004) : 553–64. http://dx.doi.org/10.1115/1.1777233.
Texte intégralThèses sur le sujet "Liquid water ratio"
Kulkarni, Prashant S. « Mixed Hydrophilic/Hydrophobic Fiber Media for Liquid-Liquid Coalescence ». University of Akron / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=akron1310686055.
Texte intégralAguilar, Boris. « Experimental study and numerical modeling of accretion phenomena of snow particles at the origin of the formation of accretions on aeronautical structures or civil engineering ». Electronic Thesis or Diss., Toulouse, ISAE, 2024. http://www.theses.fr/2024ESAE0003.
Texte intégralTo ensure safe flight under snowy conditions, aircraft manufacturers must demonstrate that each engine and its air inlet system can operate throughout the flight power range of the engine (including idling) in both falling and blowing snow conditions. This study is part of an effort to develop models for snow accretion.To establish the starting framework of this work on the modeling of snow icing, Chapter 1 is dedicated to a literature review organized in three parts. In the first part, the different processes of snow creation in the atmosphere are detailed in order to define the snow that will be studied here. In a second part, a literature review on the modelling of ice crystals icing is conducted and constitutes the starting point of this work from the modeling point of view. Finally, a third part relates the current experimental means to measure the snow conditions and the associated advantages and disadvantages.In the chapter 2 we study drag models adapted to the case of snowflakes for calculating particle trajectories. As mentioned in the state of the art, the classical models developed for non-spherical particles are proving sufficiently accurate for ice crystals. The aim here is twofold. Firstly, to check that the models valid for ice crystals are still valid for snowflakes, which are in fact aggregates of particles, much larger and of complex geometric shape. Secondly, the drag models proposed must be compatible with the type of input data. For example, at the end of a flight test campaign, particles can only be described using 2D images, a far cry from a complete and detailed 3D description of the snowflake. In light of the level of accuracy of the input data used to describe the particle, the aim of this chapter is to propose drag models based on a simple and limited geometric description of snowflakes.The chapter 3 is the equivalent of Chap. 2 for adapting heat and mass transfer models for snowflakes. The melting process of a snowflake transported by a hot air flow is studied. Once again, the requirement is twofold. Firstly, to check whether the models developed for ice crystals can be easily extended to the case of snowflakes. Secondly, to propose models for which the complexity of the input data is compatible with the level of accuracy of the databases. As a reminder, 3D descriptions of snowflakes are scarce and difficult to obtain. In many cases, a single 2D image of the particle from a flight test campaign is available. In this chapter, particular emphasis is placed on describing the particle's bulk density, and in particular its evolution during the melting process. In fact, bulk density can vary widely, from a few kg/m3 for the dry particle to 997 kg/m3 for the water droplet resulting from the melting process.At the end of the Chapters 2 and 3, models were proposed for the trajectory of the flakes and for monitoring the melting process. It is thus possible to estimate the location of the impact and the amount of water carried by the flakes. The next physical step concerns the accretion of snow particles. Experimental data will be used to validate or improve the ice crystal accretion models. To our knowledge, no database dealing with snow accretion under aeronautical conditions has been made available so far in the literature. It is in this concept that, this chapter deals with the design and the realization of such "snow" accretion tests. A first comparison with the numerical simulations of the ONERA icing code IGLOO2D will also be proposed
(9525965), Yashwant S. Yogi. « ENERGY EFFICIENCY AND FLUX ENHANCEMENT IN MEMBRANE DISTILLATION SYSTEM USING NOVEL CONDENSING SURFACES ». Thesis, 2020.
Trouver le texte intégralThe water crisis is increasing with every passing day due to climate change and increase in demand. Different desalination methods have been developed over the years to overcome this shortage of water. Reverse Osmosis is the most widely used desalination technology, but cannot treat many fouling-prone and high salinity water sources. A new desalination technology, Membrane distillation (MD), has the potential to purify wastewater as well as highly saline water up to a very high purity. It is a thermal energy-driven desalination method, which can operate on low temperature waste heat sources from industries, powerplants and renewable sources like solar power. Among the different configurations of MD, Air Gap Membrane Distillation (AGMD) is the most versatile and flexible. However, the issue that all MD technology, including AGMD face, is the low energy efficiency. Different sections of AGMD system have been modified and improved over the years through consistent research to improve its energy efficiency, but one section that is still new and unexplored, and has a very high potential to improve the energy efficiency of AGMD, is the ‘air gap’.
The aim of this research is to tap into the potential of the air gap and increase the energy efficiency of the AGMD system. It is known that decreasing the air gap thickness improves the energy efficiency parameter called Gained output ratio (GOR) to a great extent, especially at very small air gap thickness. The minimum gap thickness that maximizes the performance is smaller than the current gap thicknesses used. But it is difficult to attain such smaller air gap thickness (< 2mm) without the constant risk of flooding. Flooding can be prevented, and smaller air gap thickness can be achieved if instead of film wise condensation on the condensing surface, a different condensation flow regime is formed. This study tests different novel condensing surfaces like Slippery liquid infused porous surfaces (SLIPS) and Superhydrophobic surfaces (fabricated with different methods) inside the AGMD system with a goal of attaining smaller air gap thickness and improve the performance of AGMD system for the first time. The performance of these surfaces is compared with plain copper surface as well as with each other. Finally, numerical models are developed using the experimental data for these surfaces.
Livres sur le sujet "Liquid water ratio"
Schrijver, Karel. One Step Short of Life. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198799894.003.0002.
Texte intégralChapitres de livres sur le sujet "Liquid water ratio"
Kaller, Thomas, Alexander Doehring, Stefan Hickel, Steffen J. Schmidt et Nikolaus A. Adams. « Assessment of RANS Turbulence Models for Straight Cooling Ducts : Secondary Flow and Strong Property Variation Effects ». Dans Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 309–21. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_20.
Texte intégralTiwari, Binod, et Beena Ajmera. « Advancements in Shear Strength Interpretation, Testing, and Use for Landslide Analysis ». Dans Progress in Landslide Research and Technology, 3–54. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-44296-4_1.
Texte intégralKagawa, Akira, et Giovanna Battipaglia. « Post-photosynthetic Carbon, Oxygen and Hydrogen Isotope Signal Transfer to Tree Rings—How Timing of Cell Formations and Turnover of Stored Carbohydrates Affect Intra-annual Isotope Variations ». Dans Stable Isotopes in Tree Rings, 429–62. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92698-4_15.
Texte intégralKagawa, Akira, et Giovanna Battipaglia. « Post-photosynthetic Carbon, Oxygen and Hydrogen Isotope Signal Transfer to Tree Rings—How Timing of Cell Formations and Turnover of Stored Carbohydrates Affect Intra-annual Isotope Variations ». Dans Stable Isotopes in Tree Rings, 429–62. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92698-4_15.
Texte intégralZumwalt, Michael C. « The Use of Accurate Mass, Isotope Ratios, and MS/MS for the Analysis of PPCPs in Water ». Dans Liquid Chromatography Time-of-Flight Mass Spectrometry, 89–102. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470429969.ch6.
Texte intégralLaw, D. W., C. Gunasekara et S. Setunge. « Use of Brown Coal Ash as a Replacement of Cement in Concrete Masonry Bricks ». Dans Lecture Notes in Civil Engineering, 23–25. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_4.
Texte intégralSuárez Montenegro, Zully J., Norelhouda Abderrezag, Elena Ibáñez et Jose A. Mendiola. « Gas-Expanded Liquids Extraction ». Dans Green Extraction Techniques in Food Analysis, 324–56. BENTHAM SCIENCE PUBLISHERS, 2023. http://dx.doi.org/10.2174/9789815049459123030010.
Texte intégralFawcett, W. Ronald. « Liquids and Solutions at Interfaces ». Dans Liquids, Solutions, and Interfaces. Oxford University Press, 2004. http://dx.doi.org/10.1093/oso/9780195094329.003.0012.
Texte intégralTinker, Peter B., et Peter Nye. « Solute Interchange between Solid, Liquid, and Gas Phases in the Soil ». Dans Solute Movement in the Rhizosphere. Oxford University Press, 2000. http://dx.doi.org/10.1093/oso/9780195124927.003.0007.
Texte intégralClark, David C., et Peter J. Wilde. « Surfactant-induced surface diffusion of protein is a determinant of disperse phase stability ». Dans Gums and stabilisers for the Food industry 6, 343–50. Oxford University PressOxford, 1992. http://dx.doi.org/10.1093/oso/9780199632848.003.0044.
Texte intégralActes de conférences sur le sujet "Liquid water ratio"
Oropeza-Vazquez, C., E. Afanador, L. Gomez, S. Wang, R. Mohan, O. Shoham et G. Kouba. « Oil-Water Separation in a Novel Liquid-Liquid Cylindrical Cyclone (LLCC) Compact Separator : Experiments and Modeling ». Dans ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45547.
Texte intégralEtminan, Amin, Yuri S. Muzychka et Kevin Pope. « CFD Modelling for Gas-Liquid and Liquid-Liquid Taylor Flows in the Entrance Region of Microchannels ». Dans ASME 2021 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/fedsm2021-64172.
Texte intégralT.N.C, Anand, Senthilkumar P et Shamit Bakshi. « Break up length on Urea Water Solution jet in hot cross flow ». Dans ILASS2017 - 28th European Conference on Liquid Atomization and Spray Systems. Valencia : Universitat Politècnica València, 2017. http://dx.doi.org/10.4995/ilass2017.2017.4982.
Texte intégralKapusta, Łukasz Jan. « LIF/Mie Droplet Sizing of Water Sprays from SCR System Injector using Structured Illumination ». Dans ILASS2017 - 28th European Conference on Liquid Atomization and Spray Systems. Valencia : Universitat Politècnica València, 2017. http://dx.doi.org/10.4995/ilass2017.2017.5031.
Texte intégralLi, Xianguo, et Jihua Shen. « Experiments on Annular Liquid Jet Breakup ». Dans ASME 2001 Engineering Technology Conference on Energy. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/etce2001-17010.
Texte intégralCuccoli, Fabrizio, Luca Facheris, Fabrizio Argenti, Agnese Mazzinghi, Andrea Antonini et Luca Rovai. « Power Spectral Ratio for Estimating the Liquid Water Content Between Two Corotating LEO Satellites ». Dans IGARSS 2021 - 2021 IEEE International Geoscience and Remote Sensing Symposium. IEEE, 2021. http://dx.doi.org/10.1109/igarss47720.2021.9553807.
Texte intégralKim, Namwon, Michael C. Murphy, Steven A. Soper et Dimitris E. Nikitopoulos. « Liquid-Liquid Segmented Flows in Polymer Microfluidic Channels ». Dans ASME 2009 7th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2009. http://dx.doi.org/10.1115/icnmm2009-82277.
Texte intégralQadir, Abdul, et Peter R. Armstrong. « Hybrid Liquid-Air Transpired Solar Collector : Model Development and Sensitivity Analysis ». Dans ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-40571.
Texte intégralCao, Zhen, Zan Wu, Mehdi Sattari Najafabadi et Bengt Sunden. « Liquid-Liquid Flow Patterns in Microchannels ». Dans ASME 2017 Heat Transfer Summer Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/ht2017-4729.
Texte intégralRoesler, T. C., et C. Wilkes. « The Optimization of a Coal Water Slurry Atomizer ». Dans ASME 1989 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1989. http://dx.doi.org/10.1115/89-gt-111.
Texte intégralRapports d'organisations sur le sujet "Liquid water ratio"
He, Rui, Na (Luna) Lu et Jan Olek. Development of In-Situ Sensing Method for the Monitoring of Water-Cement (w/c) Values and the Effectiveness of Curing Concrete. Purdue University, 2022. http://dx.doi.org/10.5703/1288284317377.
Texte intégralWronkiewicz, D. J., et J. K. Bates. Alpha and gamma radiation effects on air-water systems at high gas/liquid ratios. Office of Scientific and Technical Information (OSTI), août 1993. http://dx.doi.org/10.2172/437673.
Texte intégral