Bibliographies thématiques / Liquid system

Littérature scientifique sur le sujet « Liquid system »

Auteur : Grafiati
Publié le 18 mai 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Liquid system ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Liquid system"

1

Jena, Vinod, Sanjay Ghosh, Sapana Gupta, Piyush Thakur, Noorjahan Ansari et Natalija Matić. « LIQUID-LIQUID EQUILIBRIA OF THE PHOSPHORIC ACID, ESTER AND WATER TERNARY SYSTEM ». Rudarsko-geološko-naftni zbornik 35, no 2 (2020) : 85–90. http://dx.doi.org/10.17794/rgn.2020.2.8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Janovszky, Dóra, et Kinga Tomolya. « Designing Amorphous/Crystalline Composites by Liquid-Liquid Phase Separation ». Materials Science Forum 790-791 (mai 2014) : 473–78. http://dx.doi.org/10.4028/www.scientific.net/msf.790-791.473.

Texte intégral
Résumé :
The Cu-Zr-Ag system is characterized by a miscibility gap. The liquid separates into Ag-rich and Cu-Zr rich liquids. Yttrium was added to the Cu-Zr-Ag and Cu-Zr-Ag-Al systems and its influence on liquid immiscibility was studied. This alloying element has been chosen to check the effect of the heat of mixing between silver and the given element. In the case of Ag-Y system it is highly negative (-29 kJ/mol). The liquid becomes immiscible in the Cu-Zr-Ag-Y system. To the effect of Y addition the quaternary liquid decomposed into Ag-Y rich and Cu-Zr rich liquids. The Y addition increased the field of miscibility gap. An amorphous/crystalline composite with 6 mm thickness has been successfully produced by liquid-liquid separation based on preliminary calculation of its composition. The matrix was Cu38Zr48Al6Ag8 and the crystalline phases were Ag-Y rich separate spherical droplets.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Saito, Shimpei, Yutaka Abe, Akiko Kaneko, Tetsuya Kanagawa, Yuzuru Iwasawa, Eiji Matsuo, Ken-ichi Ebihara, Hiroshi Sakaba, Kazuya Koyama et Hideki Nariai. « ICONE23-1886 EXPERIMENTAL STUDY ON JET INSTABILITY AND BREAKUP BEHAVIOR IN LIQUID-LIQUID SYSTEM ». Proceedings of the International Conference on Nuclear Engineering (ICONE) 2015.23 (2015) : _ICONE23–1—_ICONE23–1. http://dx.doi.org/10.1299/jsmeicone.2015.23._icone23-1_421.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

El-Samadony, Y. A. F., et B. M. Gibbs. « Energy Efficient Liquid Desiccant Hybrid Air Conditioning System ». International Journal of Modeling and Optimization 4, no 3 (juin 2014) : 211–15. http://dx.doi.org/10.7763/ijmo.2014.v4.375.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Bin Zhang, Bin Zhang, Shiyu Liu Shiyu Liu, Xianzhu Tang Xianzhu Tang et and Jian'gang Lu and Jian'gang Lu. « Adaptive modulation system for liquid crystal phase modulator ». Chinese Optics Letters 14, no 9 (2016) : 090604–90607. http://dx.doi.org/10.3788/col201614.090604.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Park, Manseok, Sungdong Kim et Sarah Eunkyung Kim. « TSV Liquid Cooling System for 3D Integrated Circuits ». Journal of the Microelectronics and Packaging Society 20, no 3 (30 septembre 2013) : 1–6. http://dx.doi.org/10.6117/kmeps.2013.20.3.001.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

K . Harweel, Cecelia, et Asseel M. Rasheed. « Drop Interface Coalescence in Liquid-Liquid System ». Iraqi Journal of Chemical and Petroleum Engineering 8, no 1 (30 mars 2007) : 35–42. http://dx.doi.org/10.31699/ijcpe.2007.1.5.

Texte intégral
Résumé :
This investigation is a study of the length of time where drops can exist at an oil-water interface before coalescence take place with a bulk of the same phase as the drops. Many factors affecting the time of coalescence were studied in is investigation which included: dispersed phase flow rate, continuous phase height, hole size in distributor, density difference between phases, and viscosity ratio of oil/water systems, employing three liquid/liquid systems; kerosene/water, gasoil/water, and hexane/water. Higher value of coalescence time was 8.26 s at 0.7ml/ s flow rate, 30cm height and 7mm diameter of hole for gas oil/water system, and lower value was 0.5s at 0.3ml/s flow rate, 10 cm height and 3mm diameter of hole for hexane/water system. It is observed that time of coalescence increased with increase in the dispersed phase flow rate, continuous phase height, hole size in distributor, and viscosity ratio of oil/water system. The results have been analyzed by dimensional and statistical analysis, and a correlation was developed relating coalescence time with the operating/actors and the physical properties of the three oil/water systems.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Di Wang, Di Wang, Qionghua Wang Qionghua Wang, Chuan Shen Chuan Shen, Xin Zhou Xin Zhou et Chao Liu Chao Liu. « Color holographic zoom system based on a liquid lens ». Chinese Optics Letters 13, no 7 (2015) : 072301–72305. http://dx.doi.org/10.3788/col201513.072301.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Volden, T., J. Goldowsky, N. Schmid et V. Revol. « Portable Systems for Metered Dispensing of Aggressive Liquids ». SLAS TECHNOLOGY : Translating Life Sciences Innovation 23, no 5 (29 mai 2018) : 470–75. http://dx.doi.org/10.1177/2472630318775316.

Texte intégral
Résumé :
Precise metering in liquid dispensing applications often requires application-specific solutions due to incompatibilities of the sensor and actuator components with the dispensed liquids. Some reoccurring challenges are aggressive liquids that would damage the sensors or tubing, the need for sterile liquids while the pumps or sensors cannot be sterilized, or media that can clog the sensor channels. Two different dispensing systems are here presented where the dispensing flow rate or volume is indirectly measured through a coupled pressure change or airflow, thus avoiding contact between the sensor and liquid. The controlled pressure-driven dispensing (cPDD) system builds an overpressure in the liquid reservoir by pumping air and controls the opening of the liquid output valve based on the internal pressure development. The FlowCap system uses a liquid pump on the outlet, controlled by the measured inflow of air to the reservoir. Both systems are designed for compactness and portability and offer independent operation, as well as control and communication, over a wireless interface.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Kotrasova, Kamila, et Eva Kormaníková. « A Study on Sloshing Frequencies of Liquid-Tank System ». Key Engineering Materials 635 (décembre 2014) : 22–25. http://dx.doi.org/10.4028/www.scientific.net/kem.635.22.

Texte intégral
Résumé :
Liquid storage tanks are used to store of liquids. During earthquake activity the liquid exerts impulsive and convective pressures (sloshing) on the walls and bottom of tank. In the present paper, experimental and analytical study is taken up to obtain sloshing frequency of liquid contained in rectangular calculating of circular frequencies fluid in rectangular container. Analytical results of first natural frequency are compared with experiment.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Liquid system"

1

Attergren, Max, et Martin Lindwall. « Air Liquid Interface System ». Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299329.

Texte intégral
Résumé :
The ALI-System is used to determine the toxicity of airborne nanoparticles to the human lungs. The following report seeks to describe the process of preparing an ALI-system built in a laboratory, for use outdoor. The project also involves preparing the existing ALI-system for manufacturing. The report mainly discusses the ALI-systems components, how these are constructed, demands and function. The ALI-system is very complex and needs many assisting systems to work. Some of these systems and problems with current solutions are discussed within this report. The main focus of the report is electrical systems, CAD and drafts. But also discussed are some thermal analyses.  The project generated a complete set of drafts of the exposure unit, a concept for all the electrical components and an evaluation of the heating system. The project departed from its main thesis since the available time to work on the thesis was cut short since all of the parts were not available from start, but also since there was a shortage of available workshop workers after June. Despite this the project could be regarded as successful since the client was happy with the end result.
Ett ALI-System används för att undersöka om luftburna nanopartiklar kan vara skadliga för människliga lungor. Nedan följer en rapport där ett ALI-System byggt i labb anpassas och förbereds för tillverkning. Tanken är att det skall konstrueras ett mobilt ALI-System som möjliggör mätningar i fält. Rapporten behandlar i huvudsak vilka komponenter som ingår, utformning av dessa samt krav och funktion. Systemet som skall konstrueras är komplext och kräver många delsystem för att klara av mätningar i fält. Delar av dessa system och lösningar på problem behandlas i rapporten. Huvudområden som behandlas är elektriska system, CAD och ritningar samt termiska analyser för att möta de krav som ställs. Projektet genererade ett komplett ritningsunderlag av exponeringsenhet, konceptframtagning för elektriska system samt dimensionering och analys av uppvärmningskällor. Projektets initiala mål att konstruera ett mobilt system, frångicks då upphandlingar av komponenter försenades samt att uppdragsgivaren behövde ritningsunderlag omgående på grund av tillgängligheten av verkstadspersonal under projektets gång. Trots detta anses projektet lyckat då uppdragsgivaren tillhandhölls det som önskades och arbetet som gjordes kan ligga till grund för vidareutveckling av ett mobilt system.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Floyd, Tamara M. (Tamara Michelle) 1974. « A novel microchemical system for rapid liquid-liquid chemistry ». Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8273.

Texte intégral
Résumé :
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering, February 2002.
Includes bibliographical references (leaves 110-119).
Microchemical systems are sub-milliliter systems for chemical processes. They are constructed using microfabrication techniques originally developed for the fabrication of microelectronic circuits. The reduction in size, as compared to conventional systems, offers several advantages in improvement of heat and mass transfer and control of flow fields. In addition, microchemical systems are smaller, therefore inherently safer and capable of shorter thermal response times. The focus of this work has been a microchemical system with a multi-inlet contactor for liquid-liquid processes. The systems are fabricated using, primarily, silicon and glass in which feature sizes range from approximately 10 to 500 [mu]m. The multi-inlet contactor consists of 10 alternating inlets for two components. Fluids continuously enter the contactor, are focused by a converging channel, mix and react in a 50 m channel. The contactor is the central element in the microchemical system that also includes a parallel plate heat exchanger, infrared transmission detection capabilities and thin film metal temperature sensors. Quantitative data are obtained using on-chip optical detection methods, integrated thin film sensors, and off-chip pressure sensors. For microchemical systems, the length scales are short. Consequently, Reynolds numbers are small and the flow is laminar. When two or more streams are contacted in a homogeneous system, the flow is stable. The short length scales of the resulting lamellar stream enable rapid diffusion mixing for applications, such as kinetics studies or reaction-rate-limited operation of fast reactions.
(cont.) The mixing characteristics in the multi-inlet contactor are investigated through experiments and simulations. Without optimization, sub-second mixing times are achieved. By using experiments and simulations to gain a better understanding of diffusion mixing in the system, 99% mixing is achieved in less than 25 ms. Characterization of the microchemical system also includes determining the overall heat transfer coefficient for the parallel plate heat exchanger and demonstrating on-chip infrared transmission detection from 4000-1000 cm-1. Thus, these devices combine all the features necessary for kinetic studies, specifically control of residence time, control and monitoring of temperature, and concentration measurement by infrared spectroscopy. As a demonstration of microchemical systems as tools for kinetics studies, the microchemical mixer was used with in situ Fourier Transform infrared spectroscopy to monitor the alkaline hydrolysis of methyl formate. This reaction follows second order kinetics and is fast with a half life of 70 ms for the conditions used in this study. The rate constant that was extracted was in good agreement with the literature value. Moreover, in contrast to a previous study, no sample post processing was needed and the half-life of the reaction was reduced by an order of magnitude. Microchemical systems can also be useful tools in achieving and understanding heterogeneous fluid contacting. When an aqueous phase and organic phase are contacted in a 1:1 volumetric ratio, flow segregation can occur ...
by Tamara M. Floyd.
Ph.D.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Zeiner, Tim. « Diffusion across the interface of an liquid-liquid system ». Universitätsbibliothek Leipzig, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-198780.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Zeiner, Tim. « Diffusion across the interface of an liquid-liquid system ». Diffusion fundamentals 24 (2015) 57, S. 1-2, 2015. https://ul.qucosa.de/id/qucosa%3A14576.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Gelbart, W. « Bulk liquid-metal irradiation system ». Helmholtz-Zentrum Dresden - Rossendorf, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-165893.

Texte intégral
Résumé :
Introduction Low melting point metals are often encapsulated in a hermetic container, irradiated and the container transferred to hot-cell for material removal and processing. An important process of this kind is the production of 82Sr from rubidium (melting point: 39.5 °C.) This new concept departures completely form the encapsulated targets approach and allows an almost continues production by the irradiation of the bulk metal. As well, eliminated is the target transfer. By placing the target material dissolution chamber right in the target station, only the dissolution product is pumped to the hotcell for further processing. Material and Methods Some of the disadvantages of the encapsulated target are: 1. Complicated transfer system that is ex-pensive to install, slow and prone to failures. 2. Complex and expensive encapsulation procedure. 3. Loss of production time during the lengthy target changing. 4. Capsule geometry is constrained by the encapsulating process and transfer demands compromising heat transfer and beam power. To avoid the difficulties of liquid metal handling, metal salts are often used instead (rubidium chloride is one example). This creates other problems and limits the beam currents and production yields. In the system described, the liquid metal is transferred (by gravity) from a bulk container to an irradiation chamber. The chamber, made out of nickel-plated silver, holds the correct quantity of rubidium for one irradiation run. Because of the geometry of the chamber and the efficient cooling, up to 40KW of beam power can be delivered to the target. The chamber is equipped with thermocouples and a liquid-metal level detector and is entirely of welded/brazed construction. The alloy foil that forms the beam window is electron-beam welded to the chamber front ring. At the end of irradiation the irradiated liquid metal is gravity fed into a reaction chamber situ-ated below the irradiation chamber, and a new load of fresh rubidium released into the irradia-tion chamber. The liquid-metal transfer and the irradiation components are shown on FIG. 1, and the sectional view on FIG. 2. Appropriate chemicals (n-butanol in the case of rubidium) are delivered to the reaction chamber and the irradiated metal dissolved. The liquid dissolution product is transferred back to the hotcell. Since all steps of the reaction involve liquids, only small diameter tubes connect the target station with the hotcell. The transfer is fast and simple. The bulk liquid-metal storage container can be constructed to hold enough material for 10 or more runs. When empty, it is replaced with a pre-loaded one. The container is connected to the target system with one coupling and the exchange takes a short time. A robotic bottle exchange can be implemented if desired. The station is equipped with its own vacuum system, beam diagnostic (consisting of a four-sector mask) and a collimation. The target chamber and each of the beam intercepting components are electrically insulated to allow beam current monitoring. Constructed entirely out of metal and ceramic the target core assembly does not suffer from radiation damage. The use of aluminum, silver and alumina reduce component activation. Results and Conclusion A large part of the station design is based on the well proven construction of high current solid target system and is using the same, or similar components. Test was performed to optimize the liquid-metal transfer and the chamber filling with the correct volume, while leaving some room for expansion. A process for niobium coating of sliver is investi-gated. Niobium is known to provide good corro-sion resistance against liquid metals. Thermal modelling of the target and flow analysis of the cooling geometry is under way.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Braibant, Bertrand. « Synthèse et étude de systèmes fluorés pour l'extraction liquide-liquide de métaux stratégiques ». Thesis, Montpellier, 2017. http://www.theses.fr/2017MONTT175/document.

Texte intégral
Résumé :
Aujourd’hui, une large part des métaux utilisés par l’industrie provient généralement des mines. Certains, dits stratégiques, pourraient présenter un risque d’approvisionnement voire d’épuisement des ressources naturelles. Ces métaux sont généralement utilisés dans des processus dispersifs, et se retrouvent répartis de façon inégale, avec d’autres métaux, dans des matrices toujours plus complexes, ce qui rend leur récupération couteuse en termes de procédés et d’énergie. Que ce soit pour des raisons stratégiques, économiques ou sociétales, il apparait que le recyclage des métaux est amené à devenir une activité importante dans le futur. L’approche hydrométallurgique, et en particulier l’extraction-séparation liquide-liquide, est une technique adaptée et éprouvée à ce jour pour répondre au recyclage des métaux. Ce travail de thèse s’intéresse au développement et l’étude de systèmes moléculaires fluorés pour l’extraction et la séparation de métaux par une approche liquide-liquide. La modularité de la partie fluorée de ce type de système moléculaire permet l’étude des diverses interactions (complexations, supramoléculaires) importantes d’un point du vue fondamental dans l’extraction liquide-liquide de métaux. De plus, leurs propriétés physico-chimiques (miscibilité,…) permettent d’envisager le design de procédés innovants dans le domaine de la séparation liquide-liquide, comme la mise en œuvre de systèmes tri-phasiques. Pour cela, deux séries de malonamides fluorés avec des espaceurs de taille variable, entre la tête complexante et le groupement perfluoré, ont été synthétisés. La modulation par l’espaceur de l’effet inductif des chaines perfluorées sur les propriétés physico-chimiques des extractants et sur la complexation d’un métal a été étudiée. De même, l’influence de certains paramètres d’extraction comme la charge en extractant, en acide et l’influence du diluant ont été caractérisés. La comparaison avec les ligands homologues hydrogénés a été effectuée, et les limites des différents systèmes établies. Une série de phosphates de trialkyles a également été étudiée et appliquée à un système tri-phasique d’extraction liquide-liquide. Des résultats préliminaires valident de manière encourageante l’approche choisie
A large part of the metals used by the industry is still coming from mines. Some metals, called strategic metals, may encounter a supply risk or even a total depletion of natural resources. They are usually used in dispersive way which make their recovery complicated, costly and energy intensive since they are in unequal amount, with other metal, in ever more complex matrices. Whether for strategic, economic or societal reason, the metal recycling is about to become an important industry in a near future. Hydrometallurgical processes, and liquid-liquid extraction in particular, are a robust technic giving answer to some of the recycling challenge. Our aim was to develop and study some fluorinated system for the extraction and the separation of metal through liquid-liquid approach. The tenability of the fluorinated part of these system allow the study of multiple interaction (complexation or supramolecular ordering) important in a fundamental point of view in liquid-liquid extraction. Physical and chemical properties such as their miscibility allow the development of new processes in the solvent extraction field such as triphasic liquid extraction system. To this end, two series of fluorinated malonamides with various spacer length between the complexing head and the fluorinated moiety were synthetized. The modulation, through the spacer, of the inductive effect of the fluorinated chain on the physical and chemical properties of the extractant and the complexation of the metal was studied. The influence of various extraction parameters such as the concentration in extractant, the acid and the diluent were characterized. The comparison of these malonamides with their hydrogenated homologues was done and the limits of these systems established. A family of trialkylphosphate was developed and apply to a triphasic extraction system. Preliminary results confirm the approach
Styles APA, Harvard, Vancouver, ISO, etc.
7

Zhang, Liqin. « A new liquid-liquid partitioning system for bioseparations at low temperatures ». Ohio : Ohio University, 1997. http://www.ohiolink.edu/etd/view.cgi?ohiou1184618209.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Shih, Victor Chi-Yuan Tai Yu-Chong. « Temperature-controlled microchip liquid chromatography system / ». Diss., Pasadena, Calif. : Caltech, 2006. http://resolver.caltech.edu/CaltechETD:etd-04182006-162552.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Du, Lingguo. « Rôle des films liquides sur des problèmes de mouillage dynamiques pour des systèmes liquide-liquide ». Thesis, Bordeaux 1, 2012. http://www.theses.fr/2012BOR14566/document.

Texte intégral
Résumé :
La récupération assistée du pétrole implique la progression dans unmilieu poreux d'une phase aqueuse qui pousse une phase organique. Al'échelle du pore, les forces visqueuses et la gravité sontnégligeables, et la capillarité joue un rôle prépondérant : ledéplacement des fluides est gouverné par leur affinité avec lessurfaces et par les hétérogénéités de canaux. Les films liquidesexistent dans les pores d'une roche. Trois systèmes microfluidiquessont mis en place pour étudier le rôle des films microscopiques (demouillage) ou des films macroscopiques (de coins). Le premier consisteen un capillaire de section circulaire dans lequel on suit lemouvement d'un ménisque dans des conditions de mouillage variées. Enparticulier, en mouillage pseudo-partiel, un hystérésis d'angle decontact est observé, mais les films de mouillage présents dans cesystème conduisent à un accrochage de ligne de contact beaucoup plusfaible qu'en absence de film. Les deuxième et troisième systèmesmettent en évidence l’influence des films de coins dans un canalrectangulaire sur l'avancée du ménisque. Le couplage de l'écoulemententre la phase du coin et la phase du milieu entraîne le drainage del’huile piégée. Les propriétés de ce nouveau mécanisme sontcaractérisées par des expériences et s’accordent avec le modèleconstruit
Enhanced oil recovery involves the displacement of an organic fluid byan aqueous one in the pores of the rocks. At the pores scale. Thedisplacement of fluids is governed by wetting condition of the system.The viscous and gravity forces are negligible and the capillarityplays a dominant role heterogeneities of channel sizes. Threemicrofluidic systems are designed to study experimentally the role ofmicroscopic liquid films (wetting) or macroscopic ones (corners) inthe pores level. The first one consists of the displacement of ameniscus in a circular capillary with various wetting conditions. Inparticular, for pseudo-partial wetting systems, a contact anglehysteresis is observed but with a weak pinning as compared to partialwetting systems where there are non wetting films. The second andthird ones show the influences of liquid films in the corners of asquare channel. The coupling between the corner flows and the mainflow involves the drainage of the trapped oil cluster. The propertiesof this new mechanism are consistent with the theoretical model, andalso characterized by experiments
Styles APA, Harvard, Vancouver, ISO, etc.
10

Tan, Junyi, et 譚軍毅. « Investigation of novel liquid desiccant cooling system ». Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B42664251.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Liquid system"

1

United States. National Aeronautics and Space Administration., dir. Kinetics of diffusional droplet growth in a liquid/liquid two-phase system. [Washington, DC : National Aeronautics and Space Administration, 1992.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

E, Fradkov V., et United States. National Aeronautics and Space Administration., dir. Kinetics of diffusional droplet growth in a liquid-liquid two-phase system : Final technical report. [Washington, DC : National Aeronautics and Space Administration, 1995.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Trindade, Sergio C. Oxygenated transport liquid fuels : The total system = Combustibles liquides oxigenes pour le transport : le systeme globale. London : World Energy Conference, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

D, Southwick R., et United States. National Aeronautics and Space Administration., dir. Large liquid rocket engine transient performance simulation system. West Palm Beach, FL : Pratt & Whitney, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

D, Southwick R., et United States. National Aeronautics and Space Administration., dir. Large liquid rocket engine transient performance simulation system. West Palm Beach, Fl : United Technologies, Pratt & Whitney ; [Washington, DC, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

United States. National Aeronautics and Space Administration., dir. Kinetics of diffusional droplet growth in a liquid/liquid two-phase system : Final report. [Washington, DC : National Aeronautics and Space Administration, 1993.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Center, Lewis Research, dir. Fatigue criterion to system design, life and reliabilty. Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, 1985.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

George C. Marshall Space Flight Center., dir. Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study. [New Orleans, La.] : Martin Marietta Manned Space Systems, 1990.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

United States. National Aeronautics and Space Administration., dir. Liquid Rocket Booster (LRB) for the Space Transportation System (STS) Systems Study. [New Orleans, La.] : Martin Marietta, Manned Space Systems, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

United States. National Aeronautics and Space Administration., dir. Liquid rocket booster (LRB) for the Space Transportation System (STS) Systems Study. [New Orleans, La.?] : Martin Marietta, Manned Space Systems, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Liquid system"

1

Shiyan, Chang, Zhao Lili, Zhang Ting et Zhang Xiliang. « Liquid Biofuels ». Dans Sustainable Automotive Energy System in China, 217–70. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36847-9_8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Farmer, Thomas. « Liquid–Liquid Transitions in Y2O3–Al2O3 System ». Dans Structural Studies of Liquids and Glasses Using Aerodynamic Levitation, 65–78. Cham : Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06575-5_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Mishra, D. P. « Liquid-Propellant Injection System ». Dans Fundamentals of Rocket Propulsion, 333–95. Boca Raton : CRC Press, 2017. : CRC Press, 2017. http://dx.doi.org/10.1201/9781315175997-10.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Borgstedt, H. U., et Z. Peric. « Electrochemical Studies in the Na — Hg System ». Dans Liquid Metal Systems, 363–68. Boston, MA : Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-1977-5_40.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Liu, Xiaohua, et Yi Jiang. « Application of Liquid Desiccant System ». Dans Desiccant-Assisted Cooling, 249–81. London : Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5565-2_9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Sharma, Surbhi, et Khushbu Gumber. « Liquid Organic Hydrogen Carrier System ». Dans Prospects of Hydrogen Fueled Power Generation, 145–61. New York : River Publishers, 2024. http://dx.doi.org/10.1201/9781032656212-6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Zheng, Li, Fu Feng, Ma Linwei, Liu Pei, Zhou Zhai, Zhang Jianbing et Jiang Xiaolong. « Petroleum-Derived Liquid Fuels ». Dans Sustainable Automotive Energy System in China, 109–54. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36847-9_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Pei, Liu, Ma Linwei, Liu Guangjian, Pan Lingyin et Li Zheng. « Coal-Derived Liquid Fuels ». Dans Sustainable Automotive Energy System in China, 187–216. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36847-9_7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Van De Pol, F. C. M., et J. Branebjerg. « Micro Liquid-Handling Devices - A Review ». Dans Micro System Technologies 90, 799–805. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-45678-7_115.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Antunes Ferreira, Mafalda, Silvia D’Ambrosi, Thomas Würdinger, Pieter Wesseling et Danijela Koppers-Lalic. « Liquid Biopsy Diagnosis of CNS Metastases ». Dans Central Nervous System Metastases, 73–86. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-23417-1_6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Liquid system"

1

Kamanina, Natalia V., et Natalie A. Vasilenko. « Correlation between speed, resolution, and sensitivity of the organic photoconductor liquid crystal system ». Dans Liquid Crystals, sous la direction de Jolanta Rutkowska, Stanislaw J. Klosowicz, Jerzy Zielinski et Jozef Zmija. SPIE, 1998. http://dx.doi.org/10.1117/12.299997.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Blunk, D., Klaus Praefcke, M. Jachmann et M. Horn. « 1,4-diketo-pyrrolo[3,4-c]pyrrole : a novel core system for liquid crystals ». Dans Liquid Crystals, sous la direction de Marzena Tykarska, Roman S. Dabrowski et Jerzy Zielinski. SPIE, 1998. http://dx.doi.org/10.1117/12.301281.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Li, Lingshan, Jihwan Kim, Shuojia Shi et Michael J. Escuti. « Color-selective geometric phase lens for apochromatic lens system ». Dans Liquid Crystals XXIV, sous la direction de Iam Choon Khoo. SPIE, 2020. http://dx.doi.org/10.1117/12.2569165.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Hicks, Sarah, Kyung Min Lee, Michael E. McConney, Nelson V. Tabiryan et Timothy J. Bunning. « Rewriting bulk photoalignment of nematic liquid crystals in a two-step exposure system ». Dans Liquid Crystals XXV, sous la direction de Iam Choon Khoo. SPIE, 2021. http://dx.doi.org/10.1117/12.2594786.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kumemura, Momoko. « Liquid-Liquid Extraction in Microfluidic System Using Dispersed Liquid Droplet ». Dans SLOW DYNAMICS IN COMPLEX SYSTEMS : 3rd International Symposium on Slow Dynamics in Complex Systems. AIP, 2004. http://dx.doi.org/10.1063/1.1764075.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Kim, W. T., K. S. Song et Y. Lee. « DEVELOPMENT AND EVALUATION OF A TWO-PHASE LOOP-TYPE THERMOSYPHON FOR COOLING TELECOMMUNICATIONS SYSTEM ». Dans International Symposium on Liquid-Liquid Two Phase Flow and Transport Phenomena. Connecticut : Begellhouse, 1997. http://dx.doi.org/10.1615/ichmt.1997.intsymliqtwophaseflowtranspphen.230.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Pierson, R. M., J. E. Lucken et H. W. Shaver. « Liquid Petroleum Confinement System ». Dans SPE Production and Operations Symposium. Society of Petroleum Engineers, 2001. http://dx.doi.org/10.2118/67243-ms.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Wang, Qiong-Hua, Di Wang, Lei Li et Su-Juan Liu. « Holographic zoom system based on spatial light modulator and liquid device ». Dans Emerging Liquid Crystal Technologies XIII, sous la direction de Igor Muševič, Liang-Chy Chien, Dirk J. Broer et Vladimir G. Chigrinov. SPIE, 2018. http://dx.doi.org/10.1117/12.2297074.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

He, Xiaoxian, Qinggui Tan, Hongru Guo, Liang Wu, Xiangru Wang et Caidong Xiong. « Polarization-independent beam-steering system based on liquid-crystal spatial light modulators ». Dans Emerging Liquid Crystal Technologies XIV, sous la direction de Liang-Chy Chien. SPIE, 2019. http://dx.doi.org/10.1117/12.2508207.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Flynn, Howard, Brian Lusby et Mark Villemarette. « Liquid Oxygen/Liquid Methane Integrated Propulsion System Test Bed ». Dans 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston, Virigina : American Institute of Aeronautics and Astronautics, 2011. http://dx.doi.org/10.2514/6.2011-5842.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Liquid system"

1

Adams, R. T. Liquid Effluent Monitoring Information System (LEMIS) System Construction. Office of Scientific and Technical Information (OSTI), octobre 1994. http://dx.doi.org/10.2172/10192088.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Meloy, R. T. Contaminated liquid drain system operability test. Office of Scientific and Technical Information (OSTI), avril 1995. http://dx.doi.org/10.2172/65028.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Baker, M. N., et H. M. Houston. Liquid waste treatment system. Final report. Office of Scientific and Technical Information (OSTI), juin 1999. http://dx.doi.org/10.2172/754794.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Ward, Kyle, et Timothy Jacobs. PR-457-20204-R01 Pump Station Efficiency Improvement Evaluation. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), janvier 2021. http://dx.doi.org/10.55274/r0012006.

Texte intégral
Résumé :
Pipeline transmission of liquids, although highly cost effective relative to other means of liquid transport (e.g., on-highway freight vehicles or trains), still encumbers costs with opportunities for improvement. Liquid pumps, serving as the prime mover for liquids in a pipeline, are a chief operating expense for pipeline transmission. A large and diverse set of pump characteristics - both in terms of style, motive force, and age -make it difficult to identify technologies that result in substantial cost savings for the owner / operator of liquid pipeline systems. Thus, characterizing and classifying the various liquid pump technologies, as well as identifying the latest advancements that can enable retrofit and / or new installation improvements for the purpose of reducing operational pump costs and downtime, is crucial. This study identifies the latest advancements that can increase pump efficiency, increase overall system efficiency, and allow for short-term and long-term cost savings.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Greg Harper et Charles Powars. Advanced Liquid Natural Gas Onboard Storage System. Office of Scientific and Technical Information (OSTI), octobre 2003. http://dx.doi.org/10.2172/835120.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Westsik, J. H. Jr. Temperature control system for liquid-fed ceramic melters. Office of Scientific and Technical Information (OSTI), octobre 1986. http://dx.doi.org/10.2172/5058726.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Westsik, J. H. Jr, et B. B. Brenden. Melter viewing system for liquid-fed ceramic melters. Office of Scientific and Technical Information (OSTI), janvier 1988. http://dx.doi.org/10.2172/5460207.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Baker, M. N., et R. F. Gessner. Low-level liquid waste treatment system start-up. Office of Scientific and Technical Information (OSTI), juillet 1989. http://dx.doi.org/10.2172/10197011.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Goericke, Ralf. Acquisition of a Liquid Chromatography/Mass-Spectrometry System. Fort Belvoir, VA : Defense Technical Information Center, septembre 1998. http://dx.doi.org/10.21236/ada353903.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Nataf, J., et F. Winkelmann. Dynamic simulation of a liquid desiccant cooling system using the Energy Kernel System. Office of Scientific and Technical Information (OSTI), février 1991. http://dx.doi.org/10.2172/5968703.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Liquid system » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie