Littérature scientifique sur le sujet « Laser keyhole »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Laser keyhole ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Laser keyhole"
Cunningham, Ross, Cang Zhao, Niranjan Parab, Christopher Kantzos, Joseph Pauza, Kamel Fezzaa, Tao Sun et Anthony D. Rollett. « Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging ». Science 363, no 6429 (21 février 2019) : 849–52. http://dx.doi.org/10.1126/science.aav4687.
Texte intégralAl-Aloosi, Raghad Ahmed, Zainab Abdul-Kareem Farhan et Ahmad H. Sabry. « Remote laser welding simulation for aluminium alloy manufacturing using computational fluid dynamics model ». Indonesian Journal of Electrical Engineering and Computer Science 27, no 3 (1 septembre 2022) : 1533. http://dx.doi.org/10.11591/ijeecs.v27.i3.pp1533-1541.
Texte intégralFabbro, Remy. « Depth Dependence and Keyhole Stability at Threshold, for Different Laser Welding Regimes ». Applied Sciences 10, no 4 (21 février 2020) : 1487. http://dx.doi.org/10.3390/app10041487.
Texte intégralZhao, Cang, Niranjan D. Parab, Xuxiao Li, Kamel Fezzaa, Wenda Tan, Anthony D. Rollett et Tao Sun. « Critical instability at moving keyhole tip generates porosity in laser melting ». Science 370, no 6520 (26 novembre 2020) : 1080–86. http://dx.doi.org/10.1126/science.abd1587.
Texte intégralUr Rehman, Asif, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu et Ion N. Mihailescu. « Keyhole Formation by Laser Drilling in Laser Powder Bed Fusion of Ti6Al4V Biomedical Alloy : Mesoscopic Computational Fluid Dynamics Simulation versus Mathematical Modelling Using Empirical Validation ». Nanomaterials 11, no 12 (3 décembre 2021) : 3284. http://dx.doi.org/10.3390/nano11123284.
Texte intégralDong, William, Jason Lian, Chengpo Yan, Yiran Zhong, Sumanth Karnati, Qilin Guo, Lianyi Chen et Dane Morgan. « Deep-Learning-Based Segmentation of Keyhole in In-Situ X-ray Imaging of Laser Powder Bed Fusion ». Materials 17, no 2 (21 janvier 2024) : 510. http://dx.doi.org/10.3390/ma17020510.
Texte intégralJin, Xiangzhong, Yuanyong Cheng, Licheng Zeng, Yufeng Zou et Honggui Zhang. « Multiple Reflections and Fresnel Absorption of Gaussian Laser Beam in an Actual 3D Keyhole during Deep-Penetration Laser Welding ». International Journal of Optics 2012 (2012) : 1–8. http://dx.doi.org/10.1155/2012/361818.
Texte intégralLai, Wai Jun, Supriyo Ganguly et Wojciech Suder. « Study of the effect of inter-pass temperature on weld overlap start-stop defects and mitigation by application of laser defocusing ». International Journal of Advanced Manufacturing Technology 114, no 1-2 (8 mars 2021) : 117–30. http://dx.doi.org/10.1007/s00170-021-06851-8.
Texte intégralHao, Zhongjia, Huiyang Chen, Xiangzhong Jin et Zuguo Liu. « Comparative Study on the Behavior of Keyhole in Analogy Welding and Real Deep Penetration Laser Welding ». Materials 15, no 24 (16 décembre 2022) : 9001. http://dx.doi.org/10.3390/ma15249001.
Texte intégralHenze, Insa, et Peer Woizeschke. « Laser Keyhole Brazing ». PhotonicsViews 18, S1 (février 2021) : 30–31. http://dx.doi.org/10.1002/phvs.202100013.
Texte intégralThèses sur le sujet "Laser keyhole"
Holbert, Roy Kyle. « An investigation of the keyhole penetration mode in carbon dioxide laser welding / ». The Ohio State University, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487849377292756.
Texte intégralBlackburn, Jonathan. « Understanding porosity formation and prevention when welding titanium alloys with 1μm wavelength laser beams ». Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/understanding-porosity-formation-and-prevention-when-welding-titanium-alloys-with-1-micro-metre-wavelength-laser-beams(d8708b46-50ac-42f1-8f5e-a26ebdfc8ae6).html.
Texte intégralRos, García Adrián, et Silva Luis Bujalance. « Laser welding for battery cells of hybrid vehicles ». Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-17588.
Texte intégralFolchitto, Edoardo. « Saldatura laser di componenti in rame per la produzione di motori elettrici nel settore automotive ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Trouver le texte intégralTirand, Guillaume. « Etude des conditions de soudage laser d'alliages à base aluminium par voie expérimentale et à l'aide d'une simulation numérique ». Thesis, Bordeaux 1, 2012. http://www.theses.fr/2012BOR14482/document.
Texte intégralThe development of laser welding in various branches of industry particularly in the aeronautics during the last decade, required many studies still insufficient in number to understand and control the conditions of laser welding concerning laser / material interaction,as well as thermal transfers or metallurgical aspects. The approach followed in this study consists (1) to bring to light experimentally the problem of laser welding of aluminium based alloy, that is the coupling of the effects between the various welding parameters, (2) to describe the thermal history of an operation of laser welding from a modelling and from a numerical simulation and (3) to exploit the knowledge of the thermal evolution of an assembly all along welding operation to optimize the mechanical performance of the assembly in term of static resistance, resistance to hot cracking, fatigue and corrosion resistance. The deficit of performance for example in term of tensile resistance is mainly related to too low speeds of cooling during welding compared with quenching. It justifies the efficiency of a post welding solution heat treatment before a precipitation hardening treatment
Zajíc, Jiří. « Porovnání vlastností tupých svarů svařených laserem a plazmou pro austenitickou a feritickou korozivzdornou ocel ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382469.
Texte intégralHeiderscheit, Timothy Donald. « Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics ». Thesis, University of Iowa, 2017. https://ir.uiowa.edu/etd/5946.
Texte intégralMétais, Alexandre. « Simulation numérique des phénomènes thermohydrauliques et de diffusion des éléments chimiques lors du soudage laser d'aciers de nature différente ». Thesis, Bourgogne Franche-Comté, 2017. http://www.theses.fr/2017UBFCK052/document.
Texte intégralThe design of new steel grades offering equivalent mechanical performances for lower thicknesses and the added value with the possibility to join two different steel grades, require development and control of joining processes. Thanks to high precision and good flexibility, the laser welding became one of the most used processes for joining of dissimilar welded blanks. The prediction of local chemical composition in the weld formed between dissimilar steels in function of the welding parameters is essential because the dilution rate and the distribution of alloying elements in the melted zone determine the final tensile strength of the weld. The goal of the present study is to create and to validate a multiphysical numerical model studying the mixing of dissimilar steels in laser weld pool. For a better understanding of materials mixing based on convection-diffusion process in the melted pool in case of full penetrated laser welding, a 3D simulation developed within COMSOL Multiphysics®, including heat transfer, fluid flow and transport of species has been performed to provide the weld geometry and quantitative mapping of elements distributions in the melted zone. In order to reduce computation time, the model has been developed basing on the following hypothesis: a steady keyhole approximation and solved in quasi-stationary form. Turbulent flow model was used to calculate velocity field. Fick law for diluted species was integrated to simulate the transport of alloying elements in the weld pool. In parallel, to validate the model, a number of experiments using pure Ni foils as tracers have been performed to obtain mapping post-mortem of Ni distribution in the melted zone. The results of simulations have been found in good agreement with experimental data. Afterwards the model was applied to laser welding between Dual Phase steel (DP) and high Mn steel (TWIP) and finally it was adapted to the study of coating dissolution in laser weld pool
Křivan, Miloš. « Simulace geometrie key hole v závislosti na svařovacích parametrech při laserovém penetračním svařování ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230461.
Texte intégralMostafa, Massaud. « Etude du perçage et du soudage laser : dynamique du capillaire ». Phd thesis, Université de Bourgogne, 2011. http://tel.archives-ouvertes.fr/tel-00692412.
Texte intégralChapitres de livres sur le sujet "Laser keyhole"
Dowden, John. « Laser Keyhole Welding : The Vapour Phase ». Dans The Theory of Laser Materials Processing, 113–51. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56711-2_5.
Texte intégralDowden, John. « Laser Keyhole Welding : The Vapour Phase ». Dans The Theory of Laser Materials Processing, 95–128. Dordrecht : Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-1-4020-9340-1_4.
Texte intégralDowden, John Michael. « Simple Models of Laser Keyhole Welding ». Dans The Mathematics of Thermal Modeling, 151–89. 2e éd. Boca Raton : CRC Press, 2024. http://dx.doi.org/10.1201/9781032684758-6.
Texte intégralKaplan, Alexander. « Keyhole Welding : The Solid and Liquid Phases ». Dans The Theory of Laser Materials Processing, 89–112. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56711-2_4.
Texte intégralKaplan, Alexander. « Keyhole Welding : The Solid and Liquid Phases ». Dans The Theory of Laser Materials Processing, 71–93. Dordrecht : Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-1-4020-9340-1_3.
Texte intégralGong, Shuili, Shengyong Pang, Hong Wang et Linjie Zhang. « Simulation of Transient Keyhole and Weld Pool ». Dans Weld Pool Dynamics in Deep Penetration Laser Welding, 107–40. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0788-2_4.
Texte intégralGong, Shuili, Shengyong Pang, Hong Wang et Linjie Zhang. « Dynamic Behaviors of Metal Vapor/Plasma Plume Inside Transient Keyhole ». Dans Weld Pool Dynamics in Deep Penetration Laser Welding, 141–63. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0788-2_5.
Texte intégralGong, Shuili, Shengyong Pang, Hong Wang et Linjie Zhang. « Keyhole and Weld Pool Dynamics in Dual-Beam Laser Welding ». Dans Weld Pool Dynamics in Deep Penetration Laser Welding, 183–201. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0788-2_7.
Texte intégralGong, Shuili, Shengyong Pang, Hong Wang et Linjie Zhang. « Dynamical Behaviors of Keyhole and Weld Pool in Vacuum Laser Welding ». Dans Weld Pool Dynamics in Deep Penetration Laser Welding, 253–73. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0788-2_9.
Texte intégralGong, Shuili, Shengyong Pang, Hong Wang et Linjie Zhang. « Keyhole and Weld Pool Dynamics in Laser Welding with Filler Wires ». Dans Weld Pool Dynamics in Deep Penetration Laser Welding, 203–51. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0788-2_8.
Texte intégralActes de conférences sur le sujet "Laser keyhole"
Kaplan, Alexander F. H., Masami Mizutani, Seiji Katayama et Akira Matsunawa. « Keyhole laser spot welding ». Dans ICALEO® 2002 : 21st International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2002. http://dx.doi.org/10.2351/1.5066203.
Texte intégralCho, M. H., D. Farson, J. Y. Lee et C. D. Yoo. « Laser weld keyhole dynamics ». Dans ICALEO® 2001 : Proceedings of the Laser Materials Processing Conference and Laser Microfabrication Conference. Laser Institute of America, 2001. http://dx.doi.org/10.2351/1.5059953.
Texte intégralZhou, J., H. L. Tsai, P. C. Wang et R. Menassa. « Melt Flow and Porosity Formation in Pulsed Laser Keyhole Welding ». Dans ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56732.
Texte intégralPang, Shengyong, Liliang Chen, Yajun Yin, Tao Chen, Jianxin Zhou, Dunming Liao et Lunji Hu. « Three-dimensional simulation transient keyhole evolution during laser keyhole welding ». Dans Photonics and Optoelectronics Meetings 2009, sous la direction de Dianyuan Fan, Horst Weber, Xiao Zhu, Dongsheng Jiang, Xiaochun Xiao, Weiwei Dong et Desheng Xu. SPIE, 2009. http://dx.doi.org/10.1117/12.843202.
Texte intégralPoueyo-Verwaerde, Anne, B. Dabezies et Remy Fabbro. « Thermal coupling inside the keyhole during welding process ». Dans Europto High Power Lasers and Laser Applications V, sous la direction de Eckhard Beyer, Maichi Cantello, Aldo V. La Rocca, Lucien D. Laude, Flemming O. Olsen et Gerd Sepold. SPIE, 1994. http://dx.doi.org/10.1117/12.184720.
Texte intégralGärtner, Philipp, et Rudolf Weber. « Spatter formation and keyhole observation with high speed cameras - Better understanding of the keyhole formation ». Dans ICALEO® 2009 : 28th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2009. http://dx.doi.org/10.2351/1.5061576.
Texte intégralMetzbower, E. A. « Absorption in the keyhole ». Dans ICALEO® ‘97 : Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1997. http://dx.doi.org/10.2351/1.5059719.
Texte intégralBardin, Fabrice, Adolfo Cobo, Jose M. Lopez-Higuera, Olivier Collin, Pascal Aubry, Thierry Dubois, Mats Högström et al. « Process control of laser keyhole welding ». Dans ICALEO® 2004 : 23rd International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2004. http://dx.doi.org/10.2351/1.5060185.
Texte intégralTan, Wenda, et Wenkang Huang. « Numerical Modeling of Thermo-Fluid Flow and Metal Mixing in Laser Keyhole Welding of Dissimilar Metals ». Dans ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6640.
Texte intégralMatsunawa, Akira, Naoki Seto, Masami Mizutani et Seiji Katayama. « Liquid motion in keyhole laser welding ». Dans ICALEO® ‘98 : Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1998. http://dx.doi.org/10.2351/1.5059193.
Texte intégralRapports d'organisations sur le sujet "Laser keyhole"
Wood, B. C., T. A. Palmer et J. W. Elmer. Comparison Between Keyhole Weld Model and Laser Welding Experiments. Office of Scientific and Technical Information (OSTI), septembre 2002. http://dx.doi.org/10.2172/15006362.
Texte intégralAhlquist, E., V. Castillo et Y. Hu. Keyhole-mode Microscopy Dataset for Laser Powder-bed Fusion Modeling. Office of Scientific and Technical Information (OSTI), juin 2022. http://dx.doi.org/10.2172/1878448.
Texte intégral