Littérature scientifique sur le sujet « Joints (Engineering) Design and construction »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Joints (Engineering) Design and construction ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Joints (Engineering) Design and construction"
Hao, Yan E., et Yong Qiang Lan. « Analysis on Setting Joints Technology in the Concrete Structure Buildings ». Advanced Materials Research 971-973 (juin 2014) : 2052–56. http://dx.doi.org/10.4028/www.scientific.net/amr.971-973.2052.
Texte intégralHe, Chang, Faxing Ding et Yujie Yu. « Teaching Reform of Advanced Steel Structure Course Based on Accident Cases -Taking the Joint Design as an Example ». Journal of Education and Development 6, no 1 (30 mars 2022) : 22. http://dx.doi.org/10.20849/jed.v6i1.1072.
Texte intégralDeineko, Andrei V., Valentina A. Kurochkina, Irina Yu Yakovleva et Aleksandr N. Starostin. « Design of reinforced concrete slabs subject to the construction joints ». Vestnik MGSU, no 9 (septembre 2019) : 1106–20. http://dx.doi.org/10.22227/1997-0935.2019.9.1106-1120.
Texte intégralXiang, Wei Ming, Xian Chang Zheng, Kai Peng Shen et Ming Zhou. « Design of Broad-Columns Joint and Analysis of Stress for Top-down Construction Method of Underground Engineering ». Advanced Materials Research 594-597 (novembre 2012) : 1214–18. http://dx.doi.org/10.4028/www.scientific.net/amr.594-597.1214.
Texte intégralLiu, Hongtao, Qiushi Yan et Xiuli Du. « Seismic performance comparison between precast beam joints and cast-in-place beam joints ». Advances in Structural Engineering 20, no 9 (20 octobre 2016) : 1299–314. http://dx.doi.org/10.1177/1369433216674952.
Texte intégralBródka, J. « Design Of Hollow Section Overlap Joints With Reinforcing Rib Plate. Joint Resistance ». Archives of Civil Engineering 61, no 1 (1 mars 2015) : 3–16. http://dx.doi.org/10.1515/ace-2015-0001.
Texte intégralWoytowich, Richard. « Riveted Hull Joint Design in RMS Titanic and Other Pre—World War I Ships ». Marine Technology and SNAME News 40, no 02 (1 avril 2003) : 82–92. http://dx.doi.org/10.5957/mt1.2003.40.2.82.
Texte intégralMalhotra, S. K., et B. Thomas. « Effect of interface gap on load–slip characteristics of timber joints fabricated with multiple nails ». Canadian Journal of Civil Engineering 12, no 1 (1 mars 1985) : 104–13. http://dx.doi.org/10.1139/l85-011.
Texte intégralLu, Wei, Qi Wang, Bei Jiang, Shuo Xu, Bohong Liu, Peng Zhang et Zhenhua Jiang. « Comparative study on bearing mechanism and design parameters of confined concrete arch joints in deep soft rock roadway ». International Journal of Coal Science & ; Technology 6, no 4 (12 novembre 2019) : 493–504. http://dx.doi.org/10.1007/s40789-019-00272-5.
Texte intégralStøver, Eva Armstrong, Marte Haugen Sundsøy, Erlend Andenæs, Stig Geving et Tore Kvande. « Rain Intrusion through Horizontal Joints in Façade Panel Systems—Experimental Investigation ». Buildings 12, no 10 (21 septembre 2022) : 1497. http://dx.doi.org/10.3390/buildings12101497.
Texte intégralThèses sur le sujet "Joints (Engineering) Design and construction"
Wang, Xiaoping, et 王曉平. « Generalized artificial finger joint design process employing reverse engineering techniques ». Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B2953527X.
Texte intégral黃崑 et Kun Huang. « Design and detailing of diagonally reinforced interior beam-column joints for moderate seismicity regions ». Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B31244233.
Texte intégralZhu, Min. « Design of automotive joints : using optimization to translate performance criteria to physical design parameters / ». Diss., This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-06062008-165515/.
Texte intégralSteele, Alexander Gabriel. « Biomimetic Design and Construction of a Bipedal Walking Robot ». PDXScholar, 2018. https://pdxscholar.library.pdx.edu/open_access_etds/4486.
Texte intégralEl-Amoury, Tarek Abbas Ghobarah Ahmed. « Seismic rehabilitation of concrete frame beam-column joints / ». *McMaster only, 2004.
Trouver le texte intégralRadice, Joshua J. « The analysis and design of adhesively bonded composite structures ». Access to citation, abstract and download form provided by ProQuest Information and Learning Company ; downloadable PDF file 1.10Mb , 279 p, 2005. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:3181889.
Texte intégralYuan, Lie Ping. « Partial interaction behaviour of bolted side plated reinforced concrete beams ». Title page, abstract and contents only, 2003. http://web4.library.adelaide.edu.au/theses/09PH/09phl7161.pdf.
Texte intégralMelcher, Ryan James. « Characterization of polymer matrix composites and adhesively bonded joints in a cryotank environment ». Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/16035.
Texte intégralMostert, Louwrens Hubert. « Design and construction preferences for connections in the precast concrete industry of South Africa ». Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/96036.
Texte intégralENGLISH ABSTRACT: Precast concrete has been used for decades in the construction industry, locally as well as internationally. Rapid urban development and the need for shorter construction periods for building and infrastructure projects have however encouraged more use of precast concrete construction. The improved speed of construction, high quality and less labour requirements that precast offers makes it an effective type of construction method for modern development. The utilization of various precast concrete systems has been frequently used in the international construction industry, making it a very popular construction method. It was however found that one of the major drawbacks or concerns with the use of precast concrete is the connections between the precast elements. In-situ construction does not have this problem, because it is designed to a monolithic structure or building. It was identified that if the connections in precast buildings or structures are designed or constructed in an insufficient way, it can lead to severe structural problems and even failure. This highlights the importance the design and construction of precast concrete connections have on the overall stability, strength and robustness of the structure. Precast concrete buildings are not merely separate precast elements, connected together to eventually form the same principals of in-situ construction. Precast concrete and connection design is considered to be a specialist field and requires the sufficient expertise and knowledge to understand the structural system and all its different aspects. The precast connection’s function is not merely to transfer loads, but also to develop continuity and ensure monolithic behaviour of the entire precast concrete structure (Englekirk 2003). The most important or desirable structural functions of precast connections are; (i) direct transfer of loads (load paths and flow or forces), (ii) develop structural continuity and integrity, (iii) distribution of concentrated loads, (iv) allow for movements and unintended restraints and lastly to (v) ensure efficient rigidity and robustness for the connection. It can be seen that there is many factors that contribute to the overall design and construction phases of precast concrete connections. The aim of this study is to identify and investigate aspects that influence the design and construction of precast concrete connections. This study will mainly focus on precast concrete and precast connection preferences of participants in the South African construction industry. During this study, industry participants (contractors and consultants) were asked to identify certain aspects and concerns associated with precast concrete and precast connection construction. These answers were used to develop guidelines and preferences that can be used by industry participants to improvise and effectively manage the precast construction, mainly focussing on the connections between the precast elements.
AFRIKAANSE OPSOMMING: Voorafvervaardigde beton word al vir dekades gebruik in die konstruksiebedryf, plaaslik sowel as internasionaal. Vinnige stedelike ontwikkeling en die behoefte vir korter konstruksie tydperke vir die struktuur en infrastruktuur projekte het egter die gebruik en implementasie van voorafvervaardigde beton konstruksie laat toeneem. Die verbeterde spoed van die konstruksie proses, 'n hoë gehalte produk en minder arbeid vereistes wat voorafvervaardiging bied maak dit dus 'n effektiewe tipe konstruksie metode vir moderne ontwikkelings. Die benutting van verskeie voorafvervaardigde beton sisteme en elemente word reeds herhaaldelik gebruik in die internasionale konstruksiebedryf, wat dit vervolglik ʼn baie populêre en effektiewe sisteem maak. Dit is egter bevind dat een van die groot struikelblokke of probleme met die gebruik van voorafvervaardigde beton is die verbindings tussen die voorafvervaardigde elemente. In-situ beton konstruksie het dus nie hierdie probleem nie, want dit word ontwerp om 'n monolitiese beton struktuur of gebou te vorm. Dit was immers geïdentifiseer dat as die verbindings in ʼn voorafvervaardigde gebou of struktuur, ontwerp word deur ʼn ontoereikende manier, dit kan lei tot ernstige strukturele probleme en selfs strukturele faling. Dit beklemtoon dus die belangrikheid wat die ontwerp en konstruksie proses van voorafvervaardigde beton verbindings het op die algehele stabiliteit, sterkte en robuustheid van die struktuur. Voorafvervaardigde beton geboue en strukture kan nie slegs beskou word as aparte voorafvervaardigde elemente wat met mekaar verbind word om eventueel dieselfde beginsels van insitu konstruksie te vorm nie. Voorafvervaardigde beton en verbinding ontwerp word beskou as 'n spesialis veld en vereis dat die ontwerper die nodige kundigheid en kennis van die strukturele stelsel en al sy verskillende aspekte verstaan. Voorafvervaardigde beton verbindings se funksie is nie net om toegepaste kragte oor te dra nie, maar ook om strukturele kontinuïteit te ontwikkel en te verseker dat monolitiese gedrag gehandhaaf word vir die hele voorafvervaardigde beton struktuur (Englekirk 2003). Die mees belangrike strukturele funksies van voorafvervaardigde beton verbindings sluit die volgende in; (i) verseker direkte oordrag van toegepaste kragte (vloei van kragte), (ii) ontwikkeling van strukturele kontinuïteit en integriteit, (iii) die verspreiding van puntbelastings, (iv) moet voorsiening maak vir die bewegings in die voorafvervaardigde element en konneksie self en laastens (v) verskaf doeltreffende rigiditeit en robuustheid vir die konneksie sone. Dus kan daar afgelei word dat daar baie faktore is wat bydra tot die algehele ontwerp en konstruksie fases van voorafvervaardigde beton verbindings. Die doel van hierdie studie is om aspekte te identifiseer en te ondersoek wat die ontwerp en konstruksie van aspekte beton verbindings wel beïnvloed. Die studie sal hoofsaaklik fokus op voorafvervaardigde beton en verbindings voorkeure van persone in die Suid-Afrikaanse konstruksiebedryf. Tydens die studie was persone in die industrie (kontrakteurs en konsultante) ook gevra om sekere aspekte en kwellings wat verband hou met voorafvervaardigde beton asook die verbindings te identifiseer. Die antwoorde wat verkry was uit die industrie deelnemers kan toepaslik gebruik om word riglyne en voorkeure op te stel wat vervolglik gebruik en toegepas kan word in die konstruksie bedryf van Suid Afrika. Die riglyne kan effektief gebruik word om voorafvervaardigde beton asook die verbindings te verbeter en persone in die konstruksie bedryf in te lig oor voorkeure en toepassings van hierdie metode.
Zerkane, Ali S. H. « Cyclic Loading Behavior of CFRP-Wrapped Non-Ductile Reinforced Concrete Beam-Column Joints ». PDXScholar, 2016. http://pdxscholar.library.pdx.edu/open_access_etds/3000.
Texte intégralLivres sur le sujet "Joints (Engineering) Design and construction"
Mittal, K. L., et S. Kumar. Advances in modeling and design of adhesively bonded systems. Hoboken, New Jersey : Scrivener Publishing/Wiley, 2013.
Trouver le texte intégralWisbacher, Jürgen. Methoden zur rationellen Automatisierung der Montage von Schnellbefestigungselementen. Berlin : Springer, 1992.
Trouver le texte intégralClough, D. P. Design of connections for precast prestressed concrete buildings for the effects of earthquake. Chicago, Ill : PCI, 1986.
Trouver le texte intégralProdan, V. D. Tekhnika germetizat͡s︡ii razʺemnykh nepodvizhnykh soedineniĭ. Moskva : "Mashinostroenie", 1991.
Trouver le texte intégralShchetinin, G. M. Mekhanizat͡s︡ii͡a︡ obrazovanii͡a︡ soedineniĭ pri sborke aviat͡s︡ionnykh konstrukt͡s︡iĭ. Moskva : Izd-vo "Mashinostroenie", 1987.
Trouver le texte intégralM, Murray Thomas. Flush and extended multiple-row moment end-plate connections. Chicago, IL : American Institute of Steel Construction, 2002.
Trouver le texte intégralDexter, Robert J. Performance testing for modular bridge joint systems. Washington, D.C : National Research Council, Transportation Research Board, 2002.
Trouver le texte intégralMosallam, Ayman S. Design for FRP composite connections. Reston, VA : American Society of Civil Engineers, 2002.
Trouver le texte intégralBrown, D. G. Design capacity of kidney-shaped slotted connections. Ascot : Steel Construction Institute, 1998.
Trouver le texte intégralSAC Joint Venture. Guidelines Development Committee. Recommended specifications and quality assurance guidelines for steel moment-frame construction for seismic applications. [Sacramento, Calif.] : SAC Joint Venture, 2000.
Trouver le texte intégralChapitres de livres sur le sujet "Joints (Engineering) Design and construction"
Zhu, Weidong, Xiwen Zhang et Liangliang Zhang. « Analysis of Deformation Characteristics of Large Diameter Shield Tunnel with Construction Load ». Dans Lecture Notes in Civil Engineering, 455–61. Singapore : Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1260-3_41.
Texte intégralTruong, Anh-Duy, Van-Son Dinh, Van-Sang Pham et Manh-Tuan Ha. « Design and Construction for Computational Models of Ultrasonic Transducers ». Dans The AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering, 1042–63. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1968-8_89.
Texte intégralMercado-Aguirre, Isabela M., et Sonia H. Contreras-Ortiz. « Design and Construction of a Wearable Wireless Electrogoniometer for Joint Angle Measurements in Sports ». Dans VII Latin American Congress on Biomedical Engineering CLAIB 2016, Bucaramanga, Santander, Colombia, October 26th -28th, 2016, 389–92. Singapore : Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4086-3_98.
Texte intégralMaly, Pavel, et Frantisek Lopot. « FE Analysis of Load Distribution in Clinched Joints Array ». Dans Current Methods of Construction Design, 343–50. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-33146-7_39.
Texte intégralOakland, John S., et Marton Marosszeky. « Process re-design/engineering ». Dans Total Construction Management, 269–84. Abingdon, Oxon ; New York, NY : Routledge is an imprint of the : Routledge, 2017. http://dx.doi.org/10.4324/9781315694351-13.
Texte intégralDzimko, Marián, Matúš Kovaliček, Eva Gajdošová et Yoshinori Takeichi. « Experimental Verification of Tribological Properties of Thin Coatings for Artificial Human Joints ». Dans Current Methods of Construction Design, 473–80. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-33146-7_54.
Texte intégralMigliaccio, Giovanni C., et Len Holm. « Design review ». Dans Introduction to Construction Project Engineering, 119–31. Abingdon, Oxon : Routledge, 2018. : Routledge, 2018. http://dx.doi.org/10.1201/9781315185811-10.
Texte intégralZhang, Yufen, et Degang Guo. « Blind Bolted T-Plate Joints in Prefabricated Construction ». Dans Springer Tracts in Civil Engineering, 203–31. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8089-5_9.
Texte intégralMashwama, Nokulunga, Didi Thwala et Clinton Aigbavboa. « Obstacles of Sustainable Construction Project Management in South Africa Construction Industry ». Dans Sustainable Ecological Engineering Design, 305–14. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44381-8_23.
Texte intégralWarren, Dene R. « Foundation Construction and Design ». Dans Civil Engineering Construction Design and Management, 120–64. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13727-5_6.
Texte intégralActes de conférences sur le sujet "Joints (Engineering) Design and construction"
Jocic, Misa. « Satisfying Piping Stress and Flexibility Requirements With the Implementation of Expansion Joints : Techno-Economical Optimization ». Dans ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/esda2012-82206.
Texte intégralHedhmati, Mohsen, Reza Haghani et Mohammad Al-Emrani. « Durability of Adhesively Bonded CFRP/Steel Joints in Civil Engineering Applications ». Dans IABSE Congress, Stockholm 2016 : Challenges in Design and Construction of an Innovative and Sustainable Built Environment. Zurich, Switzerland : International Association for Bridge and Structural Engineering (IABSE), 2016. http://dx.doi.org/10.2749/stockholm.2016.1575.
Texte intégralOng, Chong Yong, Kok Keong Choong, Tai Boon Ong, Kenny Chia et Wong Fook Kan. « Design and Construction of Triple-Span Precast Concrete Open Spandrel Arch Bridge ». Dans IABSE Conference, Kuala Lumpur 2018 : Engineering the Developing World. Zurich, Switzerland : International Association for Bridge and Structural Engineering (IABSE), 2018. http://dx.doi.org/10.2749/kualalumpur.2018.0925.
Texte intégralKong, Xianwen. « Variable Degree-of-Freedom Spatial Mechanisms Composed of Four Circular Translation Joints ». Dans ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22332.
Texte intégralNelson, Todd G., Luis M. Baldelomar Pinto, Jared T. Bruton, Zhicheng Deng, Curtis G. Nelson et Larry L. Howell. « Deployable Convex Generalized Cylindrical Surfaces Using Torsional Joints ». Dans ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22551.
Texte intégralCole, G. K., R. Pinna, B. F. Ronalds et P. Romagnolo. « Investigation of a Simplified Fatigue Reliability Model for Optimising the Design of Tubular Joints ». Dans ASME 2002 21st International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2002. http://dx.doi.org/10.1115/omae2002-28055.
Texte intégralDeaconescu, Tudor T., Andrea I. Deaconescu et Ioana G. Petre. « Assistive Rehabilitation Device for the Joints of the Lower Limb ». Dans ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-47179.
Texte intégralZhang, Lili, Tingli Xie, Jiexiang Hu, Ping Jiang, Jasuk Koo et Seung-Kyum Choi. « Multi-Fidelity Surrogate Model-Assisted Fatigue Analysis of Welded Joints ». Dans ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22234.
Texte intégralSaajedi, M. A., J. Wang et R. English. « Strength Reduction Factor for Tubular Joints Under Combined Loading ». Dans ASME 2002 21st International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2002. http://dx.doi.org/10.1115/omae2002-28559.
Texte intégralHahn, Elad, et Offer Shai. « A Single Universal Construction Rule for the Structural Synthesis of Mechanisms ». Dans ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-59133.
Texte intégralRapports d'organisations sur le sujet "Joints (Engineering) Design and construction"
Striuk, Andrii M. Software engineering : first 50 years of formation and development. [б. в.], décembre 2018. http://dx.doi.org/10.31812/123456789/2880.
Texte intégralCORPS OF ENGINEERS WASHINGTON DC. Engineering and Design. Construction with Large Stone. Fort Belvoir, VA : Defense Technical Information Center, octobre 1990. http://dx.doi.org/10.21236/ada402849.
Texte intégralMcNeese, L. E. ORNL engineering design and construction reengineering report. Office of Scientific and Technical Information (OSTI), janvier 1998. http://dx.doi.org/10.2172/631227.
Texte intégralCORPS OF ENGINEERS WASHINGTON DC. Engineering and Design : Information Systems Design in Support of Military Construction. Fort Belvoir, VA : Defense Technical Information Center, avril 1992. http://dx.doi.org/10.21236/ada404012.
Texte intégralAffleck, Rosa T., et Reed Freeman. Challenges for Engineering Design, Construction, and Maintenance of Infrastructure in Afghanistan. Fort Belvoir, VA : Defense Technical Information Center, novembre 2010. http://dx.doi.org/10.21236/ada532415.
Texte intégralSy, Mariano, et Kevin Smith. Engineering Design, Construction, Operation, and Maintenance for the 7- Ohm Line and Relativistic Klystron Facilities. Fort Belvoir, VA : Defense Technical Information Center, septembre 1993. http://dx.doi.org/10.21236/ada271641.
Texte intégralTinjum, James. A Continuing Education Short Course and Engineering Curriculum to Accelerate Workforce Development in Wind Power Plant Design, Construction, and Operations. Office of Scientific and Technical Information (OSTI), novembre 2012. http://dx.doi.org/10.2172/1345827.
Texte intégralHellinga, Homme W. Development of Combined Computational and Experimental Approaches for Using Molecular Engineering in the Design, Construction, and Analysis of Integrated Biosensor Microsystems. Fort Belvoir, VA : Defense Technical Information Center, août 2006. http://dx.doi.org/10.21236/ada455856.
Texte intégralStehno, Abigail, Jeffrey Melby, Shubhra Misra, Norberto Nadal-Caraballo et Victor Gonzalez. Sabine Pass to Galveston Bay, TX Pre-construction, Engineering and Design (PED) : coastal storm surge and wave hazard assessment : report 4 – Freeport. Engineer Research and Development Center (U.S.), septembre 2021. http://dx.doi.org/10.21079/11681/41903.
Texte intégralStehno, Abigail, Jeffrey Melby, Shubhra Misra, Norberto Nadal-Caraballo et Victor Gonzalez. Sabine Pass to Galveston Bay, TX Pre-construction, Engineering and Design (PED) : coastal storm surge and wave hazard assessment : report 2 – Port Arthur. Engineer Research and Development Center (U.S.), septembre 2021. http://dx.doi.org/10.21079/11681/41901.
Texte intégral