Bibliographies thématiques / Integrated mixers

Littérature scientifique sur le sujet « Integrated mixers »

Auteur : Grafiati
Publié le 25 mai 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Integrated mixers ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Integrated mixers"

1

Yu, Mei, Chun Li, Xiang Gao, Zhenguo Wang, Tu-Lu Liang, Jin Shi, Jian-Xin Shi et Weiwei Xu. « High-Tc Superconducting Josephson Junction Harmonic Mixers with Stub Tuners on Integrated Bowtie Antennas ». Applied Sciences 12, no 24 (13 décembre 2022) : 12813. http://dx.doi.org/10.3390/app122412813.

Texte intégral
Résumé :
Ordinary mixers can hardly meet the requirements in terahertz (THz) communications due to the low-power and expensive THz sources. Sensitive harmonic mixers have been widely studied to avoid this problem, owing to the fact that the higher the number of harmonics, the lower the local oscillator (LO) frequency, and the lower the cost. High-Tc superconducting (HTS) Josephson junction (JJ) mixers are performing candidates for THz receiver frontends because of the advantages of excellent sensitivity, wide bandwidth, high harmonic number and low LO power requirement. However, the normal-state resistance of HTS JJ is so low that traditional antennas are difficult to match it. In other words, it is quite a challenge to match the input impedance to a low input impedance for traditional antennas, especially for antennas fed by coplanar striplines (CPSs). In this work, based on the structure of bowtie, two types of stub tuners were integrated to decrease the impedance of the bowtie antenna so as to improve the coupling efficiency between the traditional bowtie antenna and the JJ. Furthermore, HTS YBa2Cu3O7-δ (YBCO) JJ harmonic mixers coupled with the proposed structures and fed by CPSs are fabricated and measured. The measurements show that the JJ mixer coupled with a pair of open-end stubs of the bowtie antenna achieves up to 88 harmonics, with a conversion efficiency of −69.6 dB. In contrast, the JJ mixer coupled with a pair of lumped-element stubs of the bowtie antenna only attains to 30 harmonics, with a conversion efficiency of −73.4 dB. Additional numerical simulations indicate that the coupling efficiency is enhanced when the complex impedance of the antenna is explicitly considered. Compared with other coupled traditional antennas, the JJ mixer with bowtie antenna has the largest harmonic number. This work paves the way for the future application of low-frequency and low-cost LO for THz communications.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Singh, S., S. C. Bera et D. Pujara. « Compact and Low Loss Microwave Idlers for Low Frequency Integrated Circuits ». Advanced Electromagnetics 8, no 3 (10 juin 2019) : 23–28. http://dx.doi.org/10.7716/aem.v8i3.1040.

Texte intégral
Résumé :
Two design methodologies for realization of low frequency (less than 20 GHz) compact and low loss microwave idlers have been proposed in this paper. Such idlers can be used for realizing low frequency higher order (6X or more) harmonic mixers or multipliers on monolithic integrated technology. Low frequency higher order harmonic mixers or multipliers are generally avoided due to higher losses and board space consumed by multiple idlers. The present proposed methods of idler design are based on realization of idlers by combining distributed microstrip transmission line and lumped components. The approach helps in transmitting the desired frequency with lower insertion loss and providing more rejection to the undesired frequencies. The design proposal has been demonstrated by designing an idler for 3 GHz LO side of a 6X harmonic MMIC mixer. This mixer utilizes 6th harmonic of the 3 GHz LO for generating 18 GHz output RF signal by frequency mixing. The idler for 3 GHz LO rejects dc, IF and selective even harmonics of LO; 6 GHz, 12 GHz and 18 GHz. On wafer test results of the developed 6X harmonic MMIC mixer has substantiated the idler design.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Kerr, A. R., S. K. Pan et M. J. Feldman. « Integrated tuning elements for SIS mixers ». International Journal of Infrared and Millimeter Waves 9, no 2 (février 1988) : 203–12. http://dx.doi.org/10.1007/bf01010970.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

RAUT, RABIN, VIJAY DEVABHAKTUNI et NILADRI ROY. « AN EFFICIENT SPICE-BASED TECHNIQUE FOR PERFORMANCE CHARACTERIZATION OF BJT MIXERS ». Journal of Circuits, Systems and Computers 19, no 06 (octobre 2010) : 1333–44. http://dx.doi.org/10.1142/s0218126610006700.

Texte intégral
Résumé :
In this paper, we present a fast and simple SPICE-based technique for the performance characterization of BJT mixers. First, exploiting fundamental concepts, an AC equivalent circuit of a radio-frequency bipolar junction transistor mixer is derived. Second, this equivalent circuit is used to estimate the conversion gain, noise-figure, and nonlinearity characteristics of the mixer. The proposed technique has been validated using simulations on integrated and discrete transistor based mixer circuits.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Tahim, R. S., et B. Dutt. « Low Noise Millimeter Wave Integrated Circuit Mixers ». IETE Journal of Research 41, no 1 (janvier 1995) : 59–69. http://dx.doi.org/10.1080/03772063.1995.11437224.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Verweyen, L., H. Massler, M. Neumann, U. Schaper et W. H. Haydl. « Coplanar integrated mixers for 77-GHz automotive applications ». IEEE Microwave and Guided Wave Letters 8, no 1 (1998) : 38–40. http://dx.doi.org/10.1109/75.650982.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Wang, YiYang, Haipeng Duan, Long He, Xu Wu, Dongming Wang et Lianming Li. « Design of 39-GHz Up- and Down-Conversion Mixers for 5G mmWave TDD Applications ». Journal of Electromagnetic Engineering and Science 23, no 2 (31 mars 2023) : 21–28. http://dx.doi.org/10.26866/jees.2023.2.r.149.

Texte intégral
Résumé :
This article presents fully integrated 39-GHz bidirectional up- and down-conversion mixers for 5G millimeter-wave (mmWave) applications. Fabricated in a 65-nm CMOS process with a 1.2-V supply voltage, the up- and down-conversion mixers consume 39 and 43 mW, respectively. For 5G time-division duplexing (TDD) operation, intermediate-frequency (IF)/local-oscillator (LO)/radio-frequency (RF) T/R switches are introduced. For better isolation and low insertion loss between the up- and down-conversion mixer, a series-shunt single-pole double-throw (SPDT) structure and an equivalent lumped λ/4 transmission line are proposed for IF and RF T/R switches, respectively. To realize compact area and wide bandwidth, a transformer-based matching network is adopted in this design. Targeting multi-channel phased array applications, the measurement result shows that the up-conversion mixer achieves a 2.5-dB peak conversion gain with 6.5 GHz 3-dB bandwidth. Including the insertion loss of the switch and IF signal routing, at the maximum gain of 36.5 GHz, the up-conversion mixer achieves an output 1-dB gain compression point (OP1dB) of 2.5 dBm. Furthermore, the down-conversion mixer achieves a 5-dB peak conversion gain with a 9.7-GHz 3-dB bandwidth.
Styles APA, Harvard, Vancouver, ISO, etc.
8

ALLSTOT, DAVID J., SANKARAN ANIRUDDHAN, MIN CHU, JEYANANDH PARAMESH et SUDIP SHEKHAR. « RECENT ADVANCES AND DESIGN TRENDS IN CMOS RADIO FREQUENCY INTEGRATED CIRCUITS ». International Journal of High Speed Electronics and Systems 15, no 02 (juin 2005) : 377–428. http://dx.doi.org/10.1142/s0129156405003247.

Texte intégral
Résumé :
Several state-of-the-art wireless receiver architectures are presented including the traditional super-heterodyne, the image-reject heterodyne, the direct-conversion, and the very-low intermediate frequency (VLIF). The case studies are followed by a detailed view of receiver building blocks: low-noise amplifiers (LNA), mixers, and voltage-controlled oscillators (VCO). Two popular topologies currently exist for LNAs: the common-gate configuration, which offers low power consumption with superior stability, robustness and linearity performance, and its common-source counterpart, which provides comparatively higher gain and lower noise figure. Aside from the traditional passive and active Gilbert mixers, the even-harmonic and masking-quadrature mixers are developed to combat second-order non-linearity and improve image-rejection, respectively. For quadrature carrier generation, the degeneration-injected QVCO is superior to the cascode-injected QVCO both in terms of phase noise and tuning range. The Colpitts QVCO is attractive as a low-noise alternative as it does not disturb the output voltage as much as its traditional LC counterpart and thus offers lower phase noise.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Xu, Jian Dong, Xue Fei Lv, Yun Liu, Xiao Qiong Li et Yu Lin Deng. « Design of Integrated Control System for Microfluidic PCR Analysis Instrument ». Applied Mechanics and Materials 241-244 (décembre 2012) : 1491–95. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.1491.

Texte intégral
Résumé :
In this study, the design and development of an integrated control system for microfluidic PCR analysis instrument was presented. PID temperature control algorithm is used. The micro pumps, micro valves, and micro-mixers are command controlled by PC serial port to work together for samples and reagents driving. Sequential control strategy is introduced to control micro-pumps, micro valves, mixers, high-voltage module, and PCR reaction temperature. Labview as a software development platform is utilized to achieve human-computer exchange. All these designs are aimed to achieve the PCR reaction continuously on line from DNA extraction, purification, amplification to detection. An effective design idea for the coupling of complex microfluidic chip and instrument control was providing.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Meyer, R. G. « Intermodulation in high-frequency bipolar transistor integrated-circuit mixers ». IEEE Journal of Solid-State Circuits 21, no 4 (août 1986) : 534–37. http://dx.doi.org/10.1109/jssc.1986.1052568.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Integrated mixers"

1

Rollin, Jean Marc. « Integrated subharmonic planar Schottky diode mixers for submillimetre wave applications ». Thesis, University of Bath, 2006. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.440364.

Texte intégral
Résumé :
The growing demand for submillimetre wave (SMW ) circuits is spurred not only by the needs of traditional science applications such as radio astronomy and atmospheric remote sensing but also by military and commercial applications such as compact range radar. Several approaches to device and circuit fabrication have been developed and in the past 20 years, many successful SM W components have been built for operation up to THz frequencies. However, they all suffer one or more drawback, such as low reliability and repeatability, lengthy and difficult assembly and reliance on mechanical tuners. The first part of the work described here has been the development of high yield, high quality and high repeatability antiparallel Schottky diodes entirely fabricated at the University of Bath. After producing Schottky diodes having state of the art characteristics, the main focus of the research was the development of a process to monolithically integrate the anti-parallel Schottky diode in a 200 GHz RF mixer circuit. Throughout this research, advantage has been taken of the recent development of advanced computer aided design tools that are suitable for simulating both linear and nonlinear parts of the submillimetre mixer to design and fabricated a fixed-tuned integrated mixer at 183 GHz.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Fathi, Sina [Verfasser], Jürgen [Gutachter] Stutzki et Andreas [Gutachter] Zilges. « Development of Integrated Superconducting Balanced Mixers for THz Focal Plane Arrays / Sina Fathi ; Gutachter : Jürgen Stutzki, Andreas Zilges ». Köln : Universitäts- und Stadtbibliothek Köln, 2019. http://d-nb.info/1189811332/34.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Pabón, Armando Ayala. « Projeto de um bloco LNA-misturador para radiofrequência em tecnologia CMOS ». Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/3/3140/tde-11082010-172655/.

Texte intégral
Résumé :
Este trabalho apresenta o projeto de um bloco LNA-Misturador dentro de um mesmo circuito integrado para aplicações em um receptor Bluetooth 2;45GHz. Uma estratégia de projeto bem clara, concisa e com uma boa base física e matemática foi desenvolvida para auxiliar o processo de projeto de um bloco LNA-Misturador, composto por um LNA cascode em cascata com um misturador de chaveamento de corrente com entradas simples e degeneração indutiva nas fontes dos estágios de transcondutância. Esta estratégia foi adaptada de trabalhos apresentados na literatura. A estratégia de projeto proposta considera o compromisso entre ruído, linearidade, ganho, dissipação de potência, casamento de impedâncias e isolamento de portas, usando as dimensões dos dispositivos e condições de polarização como variáveis de projeto. Com base nesta estratégia se obteve um bloco LNA-Misturador que atinge algumas especificações propostas. Um bloco LNA-Misturador foi projetado e fabricado em uma tecnologia CMOS 0;35µm para validar a estratégia de projeto proposta. Além disso, para atingir os objetivos, durante o desenvolvimento deste trabalho foi dada atenção especial no projeto dos indutores. Foi projetado, fabricado e medido um chip de teste. Para tal fim foram aplicadas técnicas e estruturas de de-embedding nas medidas para conseguir resultados mais confiáveis. Os resultados experimentais obtidos para os indutores e os resultados preliminares do bloco LNA-Misturador s~ao satisfatórios de acordo com as especificações e os esperados das simulações. No entanto, os indutores integrados degradam significativamente o desempenho do bloco LNA-Misturador. Se forem usados processos de fabricação nos quais os indutores apresentem melhor desempenho, os resultados do bloco LNA-Misturador aplicando a estratégia de projeto desenvolvida neste trabalho podem ser melhorados. Finalmente, é importante ressaltar que a estratégia de projeto proposta neste trabalho já está sendo usada e adaptada em outros projetos com o propósito de melhorar os resultados obtidos, e conseguir auxiliar o processo de projeto deste tipo de blocos.
This work presents a fully integrated LNA-Mixer design for a Bluetooth receiver application at 2:45GHz. A concise design strategy with good physics and mathematics basis was developed to assist the design process of a LNA-Mixer block, formed by a cascode LNA in cascade to a single balanced current commutation Mixer with inductive degeneration. This strategy was adapted from literature and considers the trade-offs between noise, linearity, gain, power dissipation, impedance matching and ports isolation, using the device dimensions and bias conditions as design variables. Based on this strategy, the proposed LNA-Mixer design specifications were achieved. To validate the proposed design strategy, the LNA-Mixer were fabricated in a 0:35µm CMOS process. Furthermore, to achieve the specifications, during the development of this work a special attention to the RF CMOS inductors was given. A test chip was designed, fabricated and measured applying de-embedding structures to obtain more reliable results. The experimental results obtained for the inductors and the preliminary results for the LNA-Mixer are satisfactory compared to the specifications and as expected from simulations. However, the integrated inductors degrade the performance of the block significantly and if a manufacturing process in which the inductor has better performance is used, the resulting LNA-Mixer design applying the strategy developed in this work can be improved. Finally, it is important to highlight that the design strategy proposed in this work is already being used and adapted in other designs in order to improve the results, and to assist the design process of such blocks.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Fischer, Craig J. « Design of an Active Harmonic Rejection N-Path Filter for Highly Tunable RF Channel Selection ». DigitalCommons@CalPoly, 2017. https://digitalcommons.calpoly.edu/theses/1930.

Texte intégral
Résumé :
As the number of wireless devices in the world increases, so does the demand for flexible radio receiver architectures capable of operating over a wide range of frequencies and communication protocols. The resonance-based channel-select filters used in traditional radio architectures have a fixed frequency response, making them poorly suited for such a receiver. The N-path filter is based on 1960s technology that has received renewed interest in recent years for its application as a linear high Q filter at radio frequencies. N-path filters use passive mixers to apply a frequency transformation to a baseband low-pass filter in order to achieve a high-Q band-pass response at high frequencies. The clock frequency determines the center frequency of the band-pass filter, which makes the filter highly tunable over a broad frequency range. Issues with harmonic transfer and poor attenuation limit the feasibility of using N-path filters in practice. The goal of this thesis is to design an integrated active N-path filter that improves upon the passive N-path filter’s poor harmonic rejection and limited outof- band attenuation. The integrated circuit (IC) is implemented using the CMRF8SF 130nm CMOS process. The design uses a multi-phase clock generation circuit to implement a harmonic rejection mixer in order to suppress the 3rd and 5th harmonic. The completed active N-path filter has a tuning range of 200MHz to 1GHz and the out-ofband attenuation exceeds 60dB throughout this range. The frequency response exhibits a 14.7dB gain at the center frequency and a -3dB bandwidth of 6.8MHz.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Wootton, Simon T. G. « An integrated micromachined 1.6THz Schottky diode mixer ». Thesis, University of Bath, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.285293.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Sjöholm, Olof. « Integrated CMOS Doppler Radar : Power Amplifier Mixer ». Thesis, Linköpings universitet, Elektroniska Kretsar och System, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-129105.

Texte intégral
Résumé :
This thesis is based on a paper by V. Issakov, presented 2009, where a circuit of a merged power amplifier mixer solution was demonstrated. This work takes that solution and simplifies it for the use at a lower frequency. The implementation target is a Doppler radar application in CMOS that can detect humans in a range of 5 to 15 meters. This could be used as a burglar alarm or an automatic light switch. The report will present the background of Issakov’s work, basic theory used and the implementation of the final design. Simulations will show that the solution presented work, with a 15 dB conversion loss. This design performs well compared to reference mixers. With this report it will be shown that it is possible to make a simple and compact Doppler radar system in CMOS.
Denna avhandling bygger på en artikel av V. Issakov, presenterad 2009, där en lösning för att sammanslå en effektförstärkare med en mixer till en krets visades. Detta arbete tar denna lösning och förenklar det för användning vid en lägre frekvens. Målet är att implementera en dopplerradar i CMOS som kan detektera människor inom ett avstånd på 5 till 15 meter. Denna radar skulle kunna användas som ett inbrottslarm eller en automatisk strömbrytare. Rapporten kommer att presentera bakgrunden från Issakov’s arbete, grundläggande teori som används och genomförandet av det slutliga kretsschemat. Simuleringar visar att den presenterade lösningen fungerar, med en 15 dB konverteringsförlust. Denna konstruktion presterar väl jämfört med referens mixrar. Med denna rapport visas det att det är möjligt att göra ett enkelt och kompakt dopplerradarsystem i CMOS.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Chang, Yu-Hsu Henry. « Macromodeling and simulation of high-performance mixed Analog/Digital circuits / ». Thesis, Connect to this title online ; UW restricted, 1994. http://hdl.handle.net/1773/5956.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Gupta, Sanjeev. « Tracking antenna architectures based on an integrated mixer microstrip patch array ». Thesis, Queen's University Belfast, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.247349.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Hadj, Ahmed Asmaa. « Design of new electrochemical cells for studying enzymes by protein film electrochemistry ». Electronic Thesis or Diss., Aix-Marseille, 2022. http://www.theses.fr/2022AIXM0100.

Texte intégral
Résumé :
L’électrochimie directe des protéines (PFE) est une technique dans laquelle une enzyme est adsorbée à une électrode et son activité catalytique est mesurée sous forme d’un courant électrique, ce qui permet l’étude de la cinétique d’enzyme en fonction de différents paramètres expérimentaux. Cette technique nécessite un transport rapide du substrat vers l’électrode. Dans une étude précédente, notre équipe a proposé une nouvelle cellule électrochimique offrant un transport supérieur à l’électrode tournante, couramment utilisée dans les méthodes PFE. Dans cette thèse, nous avons exploré, à l’aide de CFD, l’effet des différents paramètres et proposé des formules semi-empiriques pour prédire les propriétés de transport dans la cellule. Puis, nous avons validé expérimentalement nos prédictions. En outre, nous avons construit un nouveau type de cellule avec des mélangeurs intégrés qui devraient permettre des changements rapides de concentrations
Protein Film Electrochemistry (PFE) is a technique in which an enzyme is adsorbed at an electrode and its catalytic turnover rate is measured as an electrical current which allows the investigation of enzyme’s kinetics as a function of different experimental parameters. However, this technique requires fast transport of the substrate towards the electrode. In a previous study, our team proposed a new design based on the wall-tube electrode that provides better transport than the rotating disc electrode, which is commonly used in PFE methods. In this thesis, we explored, using CFD, the effect of the various parameters of the design and proposed semi-empirical formulas to predict the mass transport coefficient and shear stress at the electrode. We used a 3D-printed cell to validate experimentally our predictions. Moreover, we designed and built a new type of wall-tube electrodes with integrated mixers that should allow faster changes of substrate and inhibitor’s concentrations
Styles APA, Harvard, Vancouver, ISO, etc.
10

Fayed, Ayman Adel. « Adaptive techniques for analog and mixed signal integrated circuits ». Connect to this title online, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1097519730.

Texte intégral
Résumé :
Thesis (Ph. D.)--Ohio State University, 2004.
Title from first page of PDF file. Document formatted into pages; contains xix, 232 p.; also includes graphics (some col.). Includes bibliographical references (p. 222-230).
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Integrated mixers"

1

Ahasan, Sohail. Architectures and Integrated Circuits Leveraging Multi-phase Clocking of Passive Mixers for Applications in RF/MM-wave and Electro-optical Systems. [New York, N.Y.?] : [publisher not identified], 2022.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

United States. Dept. of Energy. Environmental Restoration and Waste Management., dir. Mixed waste integrated program. Washington, D.C : USDOE, 1994.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

MIXDES 2007 (2007 Ciechocinek, Poland). Proceedings of the 14th International Conference, Mixed Design of Integrated Circuits and Systems : MIXDES 2007 : Ciechocinek, Poland, 21-23 June, 2007. [United States?] : Electron Devices Society, 2007.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Lin, Chieh. Mixed-signal layout generation concepts. Boston, MA : Kluwer Academic Publishers, 2004.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Lin, Chieh. Mixed-signal layout generation concepts. Boston : Kluwer Academic Publishers, 2003.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Donnay, Ste phane, et Georges Gielen. Substrate noise coupling in mixed-signal ASICs. New York : Springer, 2011.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

MIXDES 2006 (2006 Gdynia, Poland). Proceedings of the international conference : Mixed design of integrated circuits and systems : MIXDES 2006, Gdynia, Poland, 22-24 June 2006. [Piscataway, N.J.] : IEEE, 2006.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Napieralski, Andrzej, Zygmunt Ciota, Augustin Martinez, Gilbert Mey et Joan Cabestany, dir. Mixed Design of Integrated Circuits and Systems. Boston, MA : Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5651-0.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

United States. Dept. of Energy. Office of Technology Development., dir. Mixed waste integrated program (MWIP) : Technology summary. Washington, D.C : U.S. Dept. of Energy, 1994.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

U.S. Dept. of Energy. Mixed waste landfill integrated demonstration : Technology summary. Washington, D.C : U.S. Dept. of Energy, 1994.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Integrated mixers"

1

Mann, C. M. « Integrated Waveguides and Mixers ». Dans New Directions in Terahertz Technology, 183–91. Dordrecht : Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5760-5_14.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Niknejad, Ali M., Sohrab Emami, Babak Heydari, Ehsan Adabi, Bagher Afshar et Brian A. Floyd. « Amplifiers and Mixers ». Dans Series on Integrated Circuits and Systems, 109–57. Boston, MA : Springer US, 2008. http://dx.doi.org/10.1007/978-0-387-76561-7_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Pederson, Donald O., et Kartikeya Mayaram. « Analog Multipliers, Mixers, Modulators ». Dans Analog Integrated Circuits for Communication, 417–55. Boston, MA : Springer US, 2008. http://dx.doi.org/10.1007/978-0-387-68030-9_13.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Pederson, Donald O., et Kartikeya Mayaram. « Analog Multipliers, Mixers and Modulators ». Dans Analog Integrated Circuits for Communication, 413–50. Boston, MA : Springer US, 1991. http://dx.doi.org/10.1007/978-1-4757-2128-7_12.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Grzeszczyk, Tadeusz A. « Principles of Integrated Evaluation Systems ». Dans Mixed Intelligent Systems, 67–90. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91158-8_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Tan, Book-Kok. « Single-Chip Integrated Balanced SIS Mixer ». Dans Development of Coherent Detector Technologies for Sub-Millimetre Wave Astronomy Observations, 97–123. Cham : Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19363-2_6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Hermann, Andreas, Mathias Silvant, Jürgen Schlöffel et Erich Barke. « PARCOURS — Substrate Crosstalk Analysis for Complex Mixed-Signal-Circuits ». Dans Integrated Circuit Design, 306–15. Berlin, Heidelberg : Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/3-540-45373-3_32.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Simancas-García, José L., Farid A. Meléndez-Pertuz, Harold Combita-Niño, Ramón E. R. González et Carlos Collazos-Morales. « Integrated Analogical Signs Generator for Testing Mixed Integrated Circuits ». Dans Intelligent Human Computer Interaction, 483–95. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-98404-5_45.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Navarro Yáñez, Clemente J., María Jesús Rodríguez-García et María José Guerrero-Mayo. « Policy Evidence About the Added Value of EU-Integrated Urban Initiatives as Local Policy Mixes ». Dans EU Integrated Urban Initiatives, 193–210. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20885-0_12.

Texte intégral
Résumé :
AbstractHave local strategies promoted better urban policies and urban spaces? This chapter reviews the main evidence about this question concerning the added value of urban initiatives promoted by the EU in Spain between 1994 and 2013. The first section summarises the evidence presented in previous chapters, in line with the two aspects of added value and the specific research questions proposed about them. The second section interprets the results of the Spanish case, in line with the conceptualisation of these initiatives as multi-level policy mixes and the multi-scalar comparative analysis that is appropriate to explain local integrated strategies in the framework of the European Cohesion Policy.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Guan, Yuheng, Fan Lai, Yuhua Chen, Yi Sun et Gangyi Hu. « Analog and Mixed-Signal IC Products ». Dans Handbook of Integrated Circuit Industry, 233–77. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2836-1_14.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Integrated mixers"

1

Robertson, I. D. « Mixers ». Dans IEE Colloquium on MMICs (Monolithic Microwave Integrated Circuits). IEE, 1995. http://dx.doi.org/10.1049/ic:19951415.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

« Session M02B : Integrated Mixers I ». Dans 2004 IEE Radio Frequency Integrated Circuits (RFIC) Systems. Digest of Papers. IEEE, 2004. http://dx.doi.org/10.1109/rfic.2004.1320515.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

« Session TU3C : Integrated Mixers II ». Dans 2004 IEE Radio Frequency Integrated Circuits (RFIC) Systems. Digest of Papers. IEEE, 2004. http://dx.doi.org/10.1109/rfic.2004.1320633.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Erickson, Neal R., et Thomas M. Goyette. « Terahertz Schottky-diode balanced mixers ». Dans SPIE OPTO : Integrated Optoelectronic Devices, sous la direction de Kurt J. Linden, Laurence P. Sadwick et Créidhe M. O'Sullivan. SPIE, 2009. http://dx.doi.org/10.1117/12.807505.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Lopez-Diaz, D., I. Kallfass, A. Tessmann, H. Massler, A. Leuther, M. Schlechtweg et O. Ambacher. « Monolithic integrated 210 GHz couplers for balanced mixers and image rejection mixers ». Dans 2010 Workshop on Integrated Nonlinear Microwave and Millimeter-Wave Circuits. IEEE, 2010. http://dx.doi.org/10.1109/inmmic.2010.5480140.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Rafi, Aslam A., et T. R. Viswanathan. « Clock-gated harmonic rejection mixers ». Dans 2012 IEEE Custom Integrated Circuits Conference - CICC 2012. IEEE, 2012. http://dx.doi.org/10.1109/cicc.2012.6330613.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

McGrath, William R., Boris S. Karasik, Anders J. Skalare, Rolf A. Wyss, Bruce Bumble et Henry G. LeDuc. « Hot-electron superconductive mixers for THz frequencies ». Dans Optoelectronics '99 - Integrated Optoelectronic Devices, sous la direction de Mark S. Sherwin. SPIE, 1999. http://dx.doi.org/10.1117/12.347111.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Shen, Paul H., Keith Aliberti, Barry Stann, Peter G. Newman, Rishabh Mehandru et Fan Ren. « Analysis of InGaAs metal-semiconductor-metal OE mixers ». Dans Integrated Optoelectronic Devices 2004, sous la direction de Marek Osinski, Hiroshi Amano et Fritz Henneberger. SPIE, 2004. http://dx.doi.org/10.1117/12.527487.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Manstretta, Danilo. « High Linearity Down-Conversion CMOS Mixers ». Dans 2008 European Microwave Integrated Circuit Conference (EuMIC). IEEE, 2008. http://dx.doi.org/10.1109/emicc.2008.4772257.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Moussa, Hasan, Jessica Gonsalves, Estelle Lauga-Larroze, Sana Ibrahim, Florence Podevin, Sylvain Bourdel et Laurent Fesquet. « Making Digital N-Path Mixers ». Dans 2023 38th Conference on Design of Circuits and Integrated Systems (DCIS). IEEE, 2023. http://dx.doi.org/10.1109/dcis58620.2023.10335999.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Integrated mixers"

1

Mayberry, J., S. Stelle, M. O`Brien, M. Rudin, J. Ferguson et J. McFee. Mixed wasted integrated program : Logic diagram. Office of Scientific and Technical Information (OSTI), novembre 1994. http://dx.doi.org/10.2172/29376.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Perona, J. J., et C. H. Brown. Mixed Waste Integrated Program : A technology assessment for mercury-containing mixed wastes. Office of Scientific and Technical Information (OSTI), mars 1993. http://dx.doi.org/10.2172/10179819.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Dietsche, L. J. Mixed Waste Treatment Project : Computer simulations of integrated flowsheets. Office of Scientific and Technical Information (OSTI), décembre 1993. http://dx.doi.org/10.2172/10154134.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Ferrada, J. J., et J. B. Berry. Multicriteria decision methodology for selecting technical alternatives in the Mixed Waste Integrated Program. Office of Scientific and Technical Information (OSTI), novembre 1993. http://dx.doi.org/10.2172/10107542.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Ferraris, John P. Integrated Water Gas Shift Membrane Reactors Utilizing Novel, Non Precious Metal Mixed Matrix Membrane. Office of Scientific and Technical Information (OSTI), septembre 2013. http://dx.doi.org/10.2172/1123836.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Holland, Jeremy. Oxfam Bangladesh Economic Justice and Resilience Pillar : Integrated impact evaluation report. Oxfam GB, novembre 2022. http://dx.doi.org/10.21201/2022.9813.

Texte intégral
Résumé :
The Economic Justice and Resilience Pillar of the Oxfam Bangladesh Country Strategy 2016–19 was an ambitious and far-reaching portfolio of initiatives conducted across widely varying contexts and with a large cast of partners. This integrated evaluation report is the result of a rich study process that captured this ambitious complexity through a careful sequencing of mixed-method data collection and multi-stakeholder sense making and analysis. Despite the ambitious scope and challenging context, this report confirms that the Pillar has been highly successful and effective across several of its flagship projects. It reveals compelling evidence of economic empowerment of women and youth, emerging enterprises and value chains that create more highly skilled and capital-intensive opportunities for women producers, strengthened community-level climate resilience, and partnership strengthening at different levels. Find out more by reading the full report now.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Makhijani, Vinod B., et Andrzej J. Przekwas. Mixed-Dimensionality VLSI-Type Configurable Tools for Virtual Prototyping of Biomicrofluidic Devices and Integrated Systems. Fort Belvoir, VA : Defense Technical Information Center, octobre 2002. http://dx.doi.org/10.21236/ada408562.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Dougherty, Leanne, Lynn Abu Turk, Nrupa Jani et Chaibou Dadi. Evaluation of RISE II integrated social and behavior change activities in Niger : Baseline report. Population Council, 2022. http://dx.doi.org/10.31899/sbsr2022.1026.

Texte intégral
Résumé :
Breakthrough RESEARCH is conducting a mixed-methods study that includes quantitative methods to assess differential changes over time in key health outcomes associated with Resilience in the Sahel Enhanced (RISE) II's integrated social and behavioral change (SBC) strategy and qualitative methods to explain how and why gender-related changes occurred or were associated with these changes. This technical report presents descriptive baseline findings for the quantitative portion of the evaluation. This information will support RISE II's Resilience Food Security Activity partners to understand how to tailor planned SBC approaches to address barriers to adopting targeted health behaviors.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Hasbrouck, J. C. TTP AL921102 : An integrated geophysics program for non-intrusive characterization of mixed-Waste landfill sites. Final report. Office of Scientific and Technical Information (OSTI), septembre 1993. http://dx.doi.org/10.2172/10124466.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

MacLeod, G. A., D. L. Barker et S. Molnar. Tomographic data developed using the ABEM RAMAC borehole radar system at the Mixed Waste Landfill Integrated Demonstration. Office of Scientific and Technical Information (OSTI), février 1994. http://dx.doi.org/10.2172/10125703.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Integrated mixers » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie