Littérature scientifique sur le sujet « Injector setup »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Injector setup ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Injector setup"
Ommi, Fathollah, Koros Nekofar, Amir Kargar et Ehsan Movahed. « Experimental investigation of characteristics of a double-base swirl injector in a liquid rocket propellant engine ». Thermal Science 14, no 2 (2010) : 479–91. http://dx.doi.org/10.2298/tsci1002479o.
Texte intégralPanasenkov, A. A., S. S. Ananyev, E. D. Dlougach et B. V. Kuteev. « ANALYSIS OF THE SETUP AND PARAMETERS OF THE FNS-ST TOKAMAK FAST ATOM INJECTOR ». Problems of Atomic Science and Technology, Ser. Thermonuclear Fusion 44, no 2 (2021) : 86–99. http://dx.doi.org/10.21517/0202-3822-2021-44-2-86-99.
Texte intégralKubo, Minoru, Eriko Nango, Kensuke Tono, Tetsunari Kimura, Shigeki Owada, Changyong Song, Fumitaka Mafuné et al. « Nanosecond pump–probe device for time-resolved serial femtosecond crystallography developed at SACLA ». Journal of Synchrotron Radiation 24, no 5 (22 août 2017) : 1086–91. http://dx.doi.org/10.1107/s160057751701030x.
Texte intégralKRASILNIKOV, MIKHAIL. « BEAM DYNAMICS OPTIMIZATION FOR THE XFEL PHOTO INJECTOR ». International Journal of Modern Physics A 24, no 05 (20 février 2009) : 879–92. http://dx.doi.org/10.1142/s0217751x0904436x.
Texte intégralHorchler, Tim. « Selection Rules for Resonant Longitudinal Injector-Coupling in Experimental Rocket Combustors ». Aerospace 9, no 11 (29 octobre 2022) : 669. http://dx.doi.org/10.3390/aerospace9110669.
Texte intégralTao, Xi Cheng, Zhi Xia He, Peng Zhao, Wen Jun Zhong et Gen Miao Guo. « An Experimental Investigation of Cavitating Flow in Diesel Injector Nozzle under Different Back Pressures ». Advanced Materials Research 960-961 (juin 2014) : 1446–49. http://dx.doi.org/10.4028/www.scientific.net/amr.960-961.1446.
Texte intégralBergmann, Peter, Cornelia Schmidt-Hattenberger, Dana Kiessling, Carsten Rücker, Tim Labitzke, Jan Henninges, Gunther Baumann et Hartmut Schütt. « Surface-downhole electrical resistivity tomography applied to monitoring of CO2 storage at Ketzin, Germany ». GEOPHYSICS 77, no 6 (1 novembre 2012) : B253—B267. http://dx.doi.org/10.1190/geo2011-0515.1.
Texte intégralFerrari, Alessandro, et Tantan Zhang. « Influence of the injector setup on digital and continuous injection rate-shaping performance in diesel engine passenger cars ». Energy Conversion and Management 205 (février 2020) : 112259. http://dx.doi.org/10.1016/j.enconman.2019.112259.
Texte intégralNatarajan, S., N. V. Mahalakshmi et S. Sundarraj. « Experimental Investigation of Homogeneous Charge Compression Ignition Engine of Ethanol and Diesel Blends ». Applied Mechanics and Materials 440 (octobre 2013) : 254–59. http://dx.doi.org/10.4028/www.scientific.net/amm.440.254.
Texte intégralRocha, Emilia Fernandes de Medeiros, Osvair Vidal, Erika Tomie Koroishi, Janeth Alina Vidal Vargas et Luis Fernando Lamas de Oliveira. « Porosity Alteration of Carbonates by CO2-Enriched Brine Injection ». Materials Science Forum 965 (juillet 2019) : 69–77. http://dx.doi.org/10.4028/www.scientific.net/msf.965.69.
Texte intégralThèses sur le sujet "Injector setup"
Vieira, Rafaela Seabra. « Redução dos Tempos de Setup num Processo de Fabrico de Componentes em Borracha por Injeção : Caso de Estudo AHenriques ». Master's thesis, 2018. http://hdl.handle.net/10316/86068.
Texte intégralThis dissertation was based on the analysis performed on the tool change process during an internship at AHenriques, more specifically, the exchange of molds in rubber injection machines. Right away it was understood that the objective was the reduction of the duration of the whole process in order to streamline the production of a new reference. With a study of the Lean philosophy it was possible to identify that the most appropriate tool for the case study was the SMED methodology. In order to implement it, first it was necessary to study the whole production process in order to understand its operation and crucial points. The most important thing was to know the whole process of tool change in order to understand the objective of each one of the tasks. Only after knowing the whole process it was possible to start the planning and implementation of improvement actions. Throughout the implementation of this methodology, it was possible to identify the obstacles that didn’t allow to speed up the process and, due to them, at the internship completion date, it wasn’t possible to present results that quantified a reduction of setup time. Despite this, it is believed that positive results will manifest soon, since there’s work in progress in the continuous implementation of the improvement actions already implemented and in actions to be implemented in the future. The actions already planned for implementation in the near future aim to overcame the obstacles encountered that haven’t allowed a reduction of setup time.
A presente dissertação tem como base a análise realizada ao processo de mudança de ferramenta durante um estágio realizado na AHenriques, mais concretamente, a troca de moldes em máquinas de injeção de borracha. Compreendeu-se desde logo que o foco do caso de estudo se tratava de uma redução da duração de todo o processo de setup, de forma a agilizar o início da produção de uma nova referência. Com um estudo da filosofia Lean foi possível identificar que a ferramenta mais adequada para o caso de estudo se tratava da metodologia SMED. Para implementar a mesma, primeiro foi necessário estudar todo o processo produtivo, de forma a entender o seu funcionamento e pontos cruciais, sendo que o mais importante foi conhecer todo o processo de mudança de ferramenta de forma a entender o objetivo da realização de cada uma das tarefas da mudança de ferramenta. Só depois de conhecer bem todo o processo se passou para o planeamento e implementação de ações de melhoria. Ao longo da implementação desta metodologia, foi possível identificar os obstáculos que não permitiam agilizar o processo e, devido a esses mesmos, à data de conclusão do estágio não foi possível apresentar resultados que quantificassem uma redução do tempo de setup. Apesar disto, acredita-se que resultados positivos se comecem a sentir em breve, uma vez que, se continua a trabalhar na continua implementação das ações de melhoria já implementadas e em ações para se implementarem futuramente. As ações já planeadas para implementação num futuro próximo têm como objetivo ultrapassar os obstáculos encontrados que não permitiram até então uma redução do tempo de setup.
Chapitres de livres sur le sujet "Injector setup"
Lilleaas, August. « Setup, Teardown, and Dependency Injection with Spring Context ». Dans Pro Kotlin Web Apps from Scratch, 251–59. Berkeley, CA : Apress, 2023. http://dx.doi.org/10.1007/978-1-4842-9057-6_13.
Texte intégralColombier, Brice, Paul Grandamme, Julien Vernay, Émilie Chanavat, Lilian Bossuet, Lucie de Laulanié et Bruno Chassagne. « Multi-Spot Laser Fault Injection Setup : New Possibilities for Fault Injection Attacks ». Dans Smart Card Research and Advanced Applications, 151–66. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-97348-3_9.
Texte intégralGuillen, Oscar M., Michael Gruber et Fabrizio De Santis. « Low-Cost Setup for Localized Semi-invasive Optical Fault Injection Attacks ». Dans Constructive Side-Channel Analysis and Secure Design, 207–22. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-64647-3_13.
Texte intégralChang, Lynne, et Joseph G. LoBiondo. « Setup of Micromanipulator for Sperm Selection and Injection for IMSI : Configuring the Microscope for Intracytoplasmic Morphology-Selected Sperm Injection (IMSI) ». Dans Non-Invasive Sperm Selection for In Vitro Fertilization, 91–103. New York, NY : Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-1411-1_9.
Texte intégral« Mold setup and installation ». Dans Practical Guide To Injection Blow Molding, 121–32. CRC Press, 2007. http://dx.doi.org/10.1201/9781420014815-11.
Texte intégralHaberland, Ulrike, Thomas Allmendinger et Francesca Pugliese. « Scanner setup, cardiac protocols, and contrast injection ». Dans EACVI Handbook of Cardiovascular CT, sous la direction de Oliver Gaemperli, Pal Maurovich-Horvat, Koen Nieman, Gianluca Pontone et Francesca Pugliese, 33–42. Oxford University PressOxford, 2022. http://dx.doi.org/10.1093/med/9780192884459.003.0005.
Texte intégralWang, Enhua, Chenyao Wang, Fujun Zhang, Huasheng Cui, Chuncun Yu, Bolan Liu, Zhenfeng Zhao et Changlu Zhao. « Knock Suppression of a Spark-Ignition Aviation Piston Engine Fuelled with Kerosene ». Dans Numerical and Experimental Studies on Combustion Engines and Vehicles. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.91938.
Texte intégralArriola, Almir Villaro, Jon Mendizabal Samper et Juan Meléndez Lagunilla. « Fault Injection for On-Board ERTMS/ETCS Safety Assessment ». Dans Railway Safety, Reliability, and Security, 128–50. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-4666-1643-1.ch006.
Texte intégralHanawa, Toshihiro, et Mitsuhisa Sato. « D-Cloud ». Dans Cloud Technology, 2307–22. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-6539-2.ch110.
Texte intégral« Conclusion ». Dans The Quantum Classical Theory, sous la direction de Gert D. Billing. Oxford University Press, 2003. http://dx.doi.org/10.1093/oso/9780195146196.003.0010.
Texte intégralActes de conférences sur le sujet "Injector setup"
Marquez Macias, Fabian, Christoph Hirsch, Thomas Sattelmayer, Michael Huth et Jürgen Meisl. « Investigating the Mixture Quality in Multi-Injector Burner Systems, Part I : Experimental Setup ». Dans ASME Turbo Expo 2022 : Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-82157.
Texte intégralLacarelle, Arnaud, et Christian O. Paschereit. « Increasing the Passive Scalar Mixing Quality of Jets in Crossflow With Fluidics Actuators ». Dans ASME 2011 Turbo Expo : Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-45583.
Texte intégralLauck, Felix, Jan Witte, Michele Negri, Dominic Freudenmann et Stefan Schlechtriem. « Design and first results of an injector test setup for green hypergolic propellants ». Dans AIAA Propulsion and Energy 2019 Forum. Reston, Virginia : American Institute of Aeronautics and Astronautics, 2019. http://dx.doi.org/10.2514/6.2019-4279.
Texte intégralMoreira, Pedro, et Francisco Brójo. « Influence of Injection Angle on Pollutant Emissions and Combustion Temperature on a CFM56-3 Engine ». Dans ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-87353.
Texte intégralAhrens, L., J. Alessi, J. Benjamin, M. Blaskiewicz, J. M. Brennan, K. A. Brown, C. Carlson et al. « Setup and performance of the RHIC injector accelerators for the 2007 run with gold ions ». Dans 2007 IEEE Particle Accelerator Conference (PAC). IEEE, 2007. http://dx.doi.org/10.1109/pac.2007.4440923.
Texte intégralHe, Zhixia, Jing Bai, Qian Wang, Qingmu Mu et Yunlong Huang. « Numerical and Experimental Investigations of Cavitating Flow in a Vertical Multi-Hole Injector Nozzle ». Dans ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2010. http://dx.doi.org/10.1115/fedsm-icnmm2010-30504.
Texte intégralSchuckert, Sebastian, et Georg Wachtmeister. « Characteristics of Control Piston Motion and Pressure Inside of a Common Rail Diesel Injector ». Dans ILASS2017 - 28th European Conference on Liquid Atomization and Spray Systems. Valencia : Universitat Politècnica València, 2017. http://dx.doi.org/10.4995/ilass2017.2017.6454.
Texte intégralBornschlegel, Sebastian, Chris Conrad, Lisa Eichhorn et Michael Wensing. « Flashboiling atomization in nozzles for GDI engines ». Dans ILASS2017 - 28th European Conference on Liquid Atomization and Spray Systems. Valencia : Universitat Politècnica València, 2017. http://dx.doi.org/10.4995/ilass2017.2017.4750.
Texte intégralRajendram Soundararajan, Preethi, Daniel Durox, Guillaume Vignat, Antoine Renaud, Jérôme Beaunier et Sébastien Candel. « Comparison of Flame Describing Functions Measured in Single and Multiple Injector Configurations ». Dans ASME Turbo Expo 2022 : Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-80577.
Texte intégralIshii, Eiji, Kazuki Yoshimura et Tomoyuki Hosaka. « Effects of Valve Strokes on Spray Shapes for GDI Injector ». Dans ASME 2019 Internal Combustion Engine Division Fall Technical Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/icef2019-7133.
Texte intégral