Littérature scientifique sur le sujet « Ingénierie Dirigée par le Modèle »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Ingénierie Dirigée par le Modèle ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Ingénierie Dirigée par le Modèle"
Authosserre-Cavarero, Annie, Frédéric Bertrand, Mireille Blay-Fornarino, Philippe Collet, Hubert Dubois, Stéphane Ducasse, Sophie Dupuy-Chessa et al. « Ingénierie dirigée par les modèles : quels supports à l'interopérabilité des systèmes d'information ? » Ingénierie des systèmes d'information 18, no 2 (28 avril 2013) : 13–44. http://dx.doi.org/10.3166/isi.18.2.13-44.
Texte intégralDinh, Thi-Lan-Anh, Olivier Gerbé et Houari Sahraoui. « Un formalisme pour la gestion des connaissances. Approche ingénierie dirigée par les modèles ». Ingénierie des systèmes d'information 12, no 5 (14 décembre 2007) : 109–32. http://dx.doi.org/10.3166/isi.12.5.109-132.
Texte intégralAchari, Yannis, Francesca Ali, Amel Boudache, Philomène Bui-Xuan, Philippine Furgé, Juliana Labatte et Raluca Stanciu. « L’actualité immunologique sous l’oeil critique des étudiants de Master 2 ». médecine/sciences 35, no 4 (avril 2019) : 381–84. http://dx.doi.org/10.1051/medsci/2019070.
Texte intégralCaron, Gilles. « Le modèle organisationnel de la Bibliothèque de l’Université du Québec à Chicoutimi ». Documentation et bibliothèques 40, no 3 (6 octobre 2015) : 121–32. http://dx.doi.org/10.7202/1033471ar.
Texte intégralDufourmont, Eddy. « Un modèle pour le Japon ? Nakae Chômin et la Constitution Brésilienne de 1824 ». Estudos Japoneses, no 38 (9 août 2017) : 25–39. http://dx.doi.org/10.11606/issn.2447-7125.v0i38p25-39.
Texte intégralBracke, Danièle. « Vers un modèle théorique du transfert : les contraintes à respecter ». Articles 24, no 2 (30 avril 2008) : 235–66. http://dx.doi.org/10.7202/502010ar.
Texte intégralEl Mansouri, Mériem, et Nicole Biagioli. « La conception de serious games ou jeux vidéo éducatifs : quelles convergences de métier entre enseignant et game designer ? » Recherches en Communication 49 (1 novembre 2019) : 31–52. http://dx.doi.org/10.14428/rec.v49i49.52143.
Texte intégralKlein, Alexandre. « De Perray-Vaucluse à La Jemmerais ». Revue d’histoire de l’enfance « irrégulière » N° 23, no 1 (1 septembre 2021) : 123–37. http://dx.doi.org/10.3917/rhei.023.0123.
Texte intégralLee, Linda, Loretta M. Hillier, George Heckman, Micheline Gagnon, Michael J. Borrie, Paul Stolee et David Harvey. « Primary Care–Based Memory Clinics : Expanding Capacity for Dementia Care ». Canadian Journal on Aging / La Revue canadienne du vieillissement 33, no 3 (11 août 2014) : 307–19. http://dx.doi.org/10.1017/s0714980814000233.
Texte intégralPhan1, Denis. « Pourquoi un cadre ontologique pour la modélisation multi-agents en sciences humaines et sociales ? » Nouvelles perspectives en sciences sociales 5, no 2 (6 juillet 2010) : 101–33. http://dx.doi.org/10.7202/044079ar.
Texte intégralThèses sur le sujet "Ingénierie Dirigée par le Modèle"
Allon, Matthieu. « Ingénierie dirigée par les modèles basée sur les templates ». Thesis, Lille 1, 2018. http://www.theses.fr/2018LIL1I051/document.
Texte intégralAgainst the growing complexity of systems, model reuse is often used in the analysis and design steps of software development. In this thesis, we explore this kind of reuse by focusing on templates which are parameterized models. Templates capture general knowledge that can be adapted to various application contexts. On the basis of ‘aspectual templates’ which have a model as parameter, we propose a dedicated engineering. This one is structured around a model repository and two design spaces : one for templates one and another for application models, each space supporting specific modeling activities. We contribute to this engineering by studying three topics First, through the analysis of the UML ‘bind’ relationship, we isolate instantiation as a first-class operation to build a model based on the template structure. Questions about partial instantiation and instantiation sequences are further examined. Then, in order to ease model understanding and evolution, we provide operators for detecting and deleting templates inside models. Finally, we study the application of templates on model hierarchies which occurs in model versioning and team modeling. To facilitate these uses, rules defining the validity of such application and their effects on the relations between resulting models are given. We apply this engineering by presenting corresponding operators, their implementation in a reusable technology and their experimentation to model a REST server of data curation
Thomas, Frédéric. « Contribution à la prise en compte des plates-formes logicielles d'exécution dans une ingénierie générative dirigée par les modèles ». Phd thesis, Université d'Evry-Val d'Essonne, 2008. http://tel.archives-ouvertes.fr/tel-00382556.
Texte intégralSimonin, Jacques. « Conception de l'architecture d'un système dirigée par un modèle d'urbanisme fonctionnel ». Phd thesis, Université Rennes 1, 2009. http://tel.archives-ouvertes.fr/tel-00512182.
Texte intégralLe, Anh Tuyet. « Fédération : une architecture logicielle pour la construction d'applications dirigée par les modèles ». Phd thesis, Université Joseph Fourier (Grenoble), 2004. http://tel.archives-ouvertes.fr/tel-00004643.
Texte intégralDidonet, del Fabro Marcos. « Gestion de métadonnées utilisant tissage et transformation de modèles ». Nantes, 2007. http://www.theses.fr/2007NANT2039.
Texte intégralThe interaction and interoperability between different data sources is a major concern in many organizations. The different formats of data, APIs, and architectures increases the incompatibilities, in a way that interoperability and interaction between components becomes a very difficult task. Model driven engineering (MDE) is a paradigm that enables diminishing interoperability problems by considering every entity as a model. MDE platforms are composed of different kinds of models. Some of the most important kinds of models are transformation models, which are used to define fixed operations between different models. In addition to fixed transformation operations, there are other kinds of interactions and relationships between models. A complete MDE solution must be capable of handling different kinds of relationships. Until now, most research has concentrated on studying transformation languages. This means additional efforts must be undertaken to study these relationships and their implications on a MDE platform. This thesis studies different forms of relationships between models elements. We show through extensive related work that the major limitation of current solutions is the lack of genericity, extensibility and adaptability. We present a generic MDE solution for relationship management called model weaving. Model weaving proposes to capture different kinds of relationships between model elements in a weaving model. A weaving model conforms to extensions of a core weaving metamodel that supports basic relationship management. After proposing the unification of the conceptual foundations related to model weaving, we show how weaving models and transformation models are used as a generic approach for data interoperability. The weaving models are used to produce model transformations. Moreover, we present an adaptive framework for creating weaving models in a semi-automatic way. We validate our approach by developing a generic and adaptive tool called ATLAS Model Weaver (AMW), and by implementing several use cases from different application scenarios
Bruneliere, Hugo. « Generic Model-based Approaches for Software Reverse Engineering and Comprehension ». Thesis, Nantes, 2018. http://www.theses.fr/2018NANT4040/document.
Texte intégralNowadays, companies face more and more the problem of managing, maintaining, evolving or replacing their existing software systems. Reverse Engineering is the required phase of obtaining various representations of these systems to provide a better comprehension of their purposes / states.Model Driven Engineering (MDE) is a Software Engineering paradigm relying on intensive model creation, manipulation and use within design, development, deployment, integration, maintenance and evolution tasks. Model Driven Reverse Engineering (MDRE) has been proposed to enhance traditional Reverse Engineering approaches via the application of MDE. It aims at obtaining models from an existing system according to various aspects, and then possibly federating them via coherent views for further comprehension.However, existing solutions are limited as they quite often rely on case-specific integrations of different tools. Moreover, they can sometimes be (very) heterogeneous which may hinder their practical deployments. Generic and extensible solutions are still missing for MDRE to be combined with model view / federation capabilities.In this thesis, we propose to rely on two complementary, generic and extensible model-based approaches and their Eclipse/EMF-based implementations in open source: (i) To facilitate the elaboration of MDRE solutions in many different contexts, by obtaining different kinds of models from existing systems (e.g. their source code, data). (ii) To specify, build and manipulate views federating different models (e.g. resulting from MDRE) according to comprehension objectives (e.g. for different stakeholders)
Lardy, Romain. « Calcul intensif pour l'évaluation de la vulnérabilité en utilisant une approche d'Ingénierie Dirigée par les Modèles : application à la vulnérabilité des prairies au changement climatique sous contraintes de plans d'expériences ». Thesis, Clermont-Ferrand 2, 2013. http://www.theses.fr/2013CLF22352/document.
Texte intégralVulnerability is the degree to which human or environmental systems are likely toexperience harm due to a perturbation or a stress. In the last years, it has become a centralfocus of the global change (including climate change). Assessing the vulnerability of agroecosystemsto climate change is one of the priority areas of the French National Institute ofAgronomic Research (INRA). The climate change literature contains many explanations ofvulnerability, stemming from the notion of sensitivity to more complex ideas, yet takinginto account the exposure history of the system up to residual impacts of climate changeafter adaptation. In the framework of the activities of the INRA’s Grassland EcosystemResearch Unit (UREP) of Clermont-Ferrand, interest is on vulnerability of grassland andlivestock systems against the risk of reduced milk and forage production, and against theproblem of increased greenhouse gas emissions that comes with the production ofgrassland ecosystem services.Vulnerability assessment has similarities with sensitivity analysis and is based onsimulations of the target system, forced to respond to the changes of stress factors. Due tothe cascade of uncertainties in climate change impacts assessment, a large number ofsimulations are necessary. In this context, the need to reduce user waiting time calls for theconception of an appropriate experimental plan, as well as the use of high performancecomputing. Moreover, vulnerability assessment may consist of many steps, such asdesigning the experiment (choice of agro-ecological model, variables of interest, scenarios,reference thresholds, parameters distribution …), designing of the experimental plans,regressing response surfaces, computing metrics (e.g. vulnerability indices) and optimizingvulnerability (through designing and evaluating adaptation measures). To our knowledge,no specific tool has been built or validated, in order to facilitate the implementation ofmost of these tasks. Thus, the goal of this thesis was to propose a generic method toperform a comprehensive vulnerability analysis to climate change. The work in this thesishas begun with a review of the concept of vulnerability and the proposal of a genericapproach, based on a critical synthesis of the state of the art. Then, with a Model DrivenEngineering approach, we have developed a computer tool for vulnerability analysis. Thistool, implemented with the modelling framework Eclipse Modeling Framework (EMF) isgeneric, modular and allows the distribution and interpretation of simulation results.Finally, application examples of climate change vulnerability assessment were achievedwith the previously proposed solutions. This approach relied, in particular, on the use ofthe grassland ecosystem biogeochemical model PaSim ([Riedo et al., 1998], [Vuichard2007a], [Graux 2011])
Steel, James Richard Heron. « Typage de Modèles ». Rennes 1, 2007. https://tel.archives-ouvertes.fr/tel-00538274.
Texte intégralModel-Driven Engineering is a discipline for the construction of systems based on the use of models. Although research is active into the use of MDE and its core technologies such as languages for storing, transforming and manipulating models, less attention has been paid to techniques for ensuring the safe reuse and composition of the elements which manipulate models. This thesis presents an approach based on ideas and formalisms from the domain of type systems for defining clear notions of models and model types, as well as a relation for model type substitutability. These model typing principles are demonstrated through their implementation in the Kermeta modelling and metamodelling language. Additionally, a presentation is made of the expression problem as it pertains to model-driven engineering, and of how the use of model types can help to address the issues it represents
Rio, Maud. « A l'interface de l'ingénierie et de l'analyse environnementale : fédération pour une éco-conception proactice ». Troyes, 2012. http://www.theses.fr/2012TROY0029.
Texte intégralObserving how is performed eco-design in industry shows that environmental experts are facing some difficulties to share data with multi-domain product designers tools: technical limitations regarding standards, lack of modularity and flexibility, semantical loss associate to the data, etc. Therefore, this research contribution is to propose a method to build dynamic information exchanges between environmental experts and product designers activities involved along the design process, based on federation using Model Driven Engineering. The method is composed of two complementary parts: creating the environmental tools models to implement the company library and supporting the ecodesign process deployment regarding the global environmental strategy and tactic. The proposal has been tested on two industrial case studies: in the companies Parkeon and Quiksilver. The experimentations results shows that the method is adapted to industries and confers three properties : (1) the adaptation to the various eco-design contexts encountered during the design process (2) the capacity for the environmental expert to use any available informations produced by other designers (keeping the data semantic) and (3) the capacity for the environmental expert to give back to designers an adapted answer to help them reiterate their respective choice. This research contributes to build a constant proactivity along the design process between designers and environmental expert. They are better supported to follow the environmental tactic and strategy of the company
Gherbi, Tahar. « Une démarche d'ingénierie dirigée par les modèles pour le développement d'applications mobiles ». Lorient, 2014. http://www.theses.fr/2014LORIS331.
Texte intégralMobile agents facilitate the implementation of dynamically adaptable applications and provide a generic framework to develop distributed applications on large networks. Applications based on mobile agents are being developed in industry, government and academia; and experts predict the use of mobile agents in many Internet applications in the coming years. Generally, the development of mobile-agents applications is done without considering the "mobility" aspect in the analysis and design phases; this aspect is often treated at the implementation phase. Considering it earlier (i. E. , in the analysis and design phases), allows for a better design of this kind of applications. However, little research has focused on methods and tools of analysis and design of mobiles-agents applications. According to literature, modeling these applications can be done with three approaches: design patterns approach, formal approach and semi formal approach which includes formalisms extending Unified Modeling Language notations and approaches extending a multi-agents systems development methodology. Because multi-agents systems are relevant to design applications, we are interested in extending a multi-agents systems development methodology to support mobility. On another hand, model driven engineering helps to reduce the gap between multi-agents systems development methodologies (as the majority does not include an implementation phase) and runtime platforms. It also facilitates the moves of mobiles-agents across heterogeneous platforms, by transferring the agent’s model rather than its code. Consequently, this work considers "mobility" in the design phase and proposes a model driven engineering approach to develop multi-agents systems supporting mobility. Many multi-agents systems development methodologies exist. None is universal and there is no standard meta-model to design multi-agents systems; it is why we have looked for a meta-model which is simple, modular, general and scalable. Our choice fell on the conceptual meta- model of MDAD (Model Driven Agent Development) methodology which we extended to support mobilityand used it as the PIMM (Platform Independent Meta -Model) of our approach. To illustrate this latter, an application example “Find locations of a book through a network” has been developed (from modeling to code generation). JAVACT, a runtime platform for mobile agents, was used, a PSMM (Platform Specific Meta -Model) was built for it and rules for (PIMM-to-PSMM) transformation and code generation from the PSM obtained have been developed
Livres sur le sujet "Ingénierie Dirigée par le Modèle"
Barbier, Franck. UML 2 et MDE : Ingénierie des modèles avec études de cas. Paris : Dunod, 2005.
Trouver le texte intégralLano, Kevin. Agile Model-Based Development Using UML-RSDS. Taylor & Francis Group, 2017.
Trouver le texte intégralLano, Kevin. Agile Model-Based Development Using UML-RSDS. Taylor & Francis Group, 2017.
Trouver le texte intégralLano, Kevin. Agile Model-Based Development Using UML-RSDS. Taylor & Francis Group, 2017.
Trouver le texte intégralLano, Kevin. Agile Model-Based Development Using UML-RSDS. Taylor & Francis Group, 2017.
Trouver le texte intégralAgile Model-Based Development Using UML-RSDS. Taylor & Francis Group, 2016.
Trouver le texte intégralModel-driven engineering of information systems : Principles, techniques, and practice. Toronto : Apple Academic Press, 2015.
Trouver le texte intégralCretu, Liviu Gabriel, et Florin Dumitriu. Model-Driven Engineering of Information Systems : Principles, Techniques, and Practice. Apple Academic Press, Incorporated, 2014.
Trouver le texte intégralChapitres de livres sur le sujet "Ingénierie Dirigée par le Modèle"
DUBREUIL, Sylvain, Nathalie BARTOLI, Christian GOGU et Thierry LEFEBVRE. « Réduction d’incertitudes en analyse multidisciplinaire basée sur une étude de sensibilité par chaos polynomial ». Dans Ingénierie mécanique en contexte incertain, 121–50. ISTE Group, 2021. http://dx.doi.org/10.51926/iste.9010.ch4.
Texte intégralActes de conférences sur le sujet "Ingénierie Dirigée par le Modèle"
Sottet, Jean-Sébastien. « Ingénierie dirigée par les modèles pour la plasticité des interfaces homme machine ». Dans the 19th International Conference of the Association Francophone d'Interaction Homme-Machine. New York, New York, USA : ACM Press, 2007. http://dx.doi.org/10.1145/1541436.1541486.
Texte intégral