Littérature scientifique sur le sujet « In-Situ-Test methods »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « In-Situ-Test methods ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "In-Situ-Test methods"
Li, Qiang, You Hong Sun et Xin Fang. « In Situ Thermal Response Test Methods And Practices ». Advanced Materials Research 347-353 (octobre 2011) : 3087–92. http://dx.doi.org/10.4028/www.scientific.net/amr.347-353.3087.
Texte intégralTang, Yan Chun, Gao Tou Meng et Ji Chang Gong. « Study on Consolidation Coefficient by Different Test Methods ». Advanced Materials Research 308-310 (août 2011) : 1778–81. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.1778.
Texte intégralAmasaki, Shoji, Kazuhiro Kuzume et Toyoaki Miyagawa. « Diagnosing in Situ Concrete by Some Non-Destructive Test Methods ». Concrete Research and Technology 5, no 1 (1994) : 15–22. http://dx.doi.org/10.3151/crt1990.5.1_15.
Texte intégralLi, Zhao Yan, Yu Run Li et Long Wei Chen. « In Situ Test Methods in Bachu-Jiashi Earthquake Liquefied Evaluation ». Applied Mechanics and Materials 166-169 (mai 2012) : 2128–31. http://dx.doi.org/10.4028/www.scientific.net/amm.166-169.2128.
Texte intégralGlaser, Steven D., et Riley M. Chung. « Estimation of Liquefaction Potential by in Situ Methods ». Earthquake Spectra 11, no 3 (août 1995) : 431–55. http://dx.doi.org/10.1193/1.1585822.
Texte intégralAbdel Rahim, Khalid Abdel Naser. « Evaluating Concrete Quality using Nondestructive In-situ Testing Methods ». Revista Tecnología y Ciencia, no 36 (10 octobre 2019) : 22–40. http://dx.doi.org/10.33414/rtyc.36.22-40.2019.
Texte intégralRobertson, P. K. « In situ testing and its application to foundation engineering ». Canadian Geotechnical Journal 23, no 4 (1 novembre 1986) : 573–94. http://dx.doi.org/10.1139/t86-086.
Texte intégralMarsland, A. « The Choice of Test Methods in Site Investigations ». Geological Society, London, Engineering Geology Special Publications 2, no 1 (1986) : 289–97. http://dx.doi.org/10.1144/gsl.1986.002.01.52.
Texte intégralPetkovšek, Ana, Matej Maček et Jasna Smolar. « TESTING METHODS FOR MECHANICALLY IMPROVED SOILS : RELIABILITY AND VALIDITY ». Acta Polytechnica CTU Proceedings 10 (15 octobre 2017) : 16. http://dx.doi.org/10.14311/app.2017.10.0016.
Texte intégralDeng, Jun. « Test Methods for Mechanical Properties of Structural Adhesives ». Advanced Materials Research 97-101 (mars 2010) : 814–17. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.814.
Texte intégralThèses sur le sujet "In-Situ-Test methods"
Mullen, W. Grigg. « An evaluation of the utility of four in-situ test methods for transmission line foundation design / ». This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-07112007-092850/.
Texte intégralMullen, W. G. « An evaluation of the utility of four in-situ test methods for transmission line foundation design ». Diss., Virginia Tech, 1991. http://hdl.handle.net/10919/38760.
Texte intégralFantou, Alexandre. « Étude multi-physique et multi-échelle de la réaction d'hydratation du sulfate de calcium hémihydraté ». Electronic Thesis or Diss., Lyon, INSA, 2023. http://www.theses.fr/2023ISAL0099.
Texte intégralBecause of their setting ability, hydraulic binders are used for a wide variety of applications (e.g., construction materials, bone substitutes, ...). The setting reaction is always initiated by mixing one or several fine powders with an aqueous solution. The dissolution of the initial reactive powders results in the formation of a viscous paste, whose properties evolve with time to form a porous monolithic ceramic through the nucleation and precipitation of more stable phase(s). In this thesis, gypsum plaster CaSO4·2H2O obtained by the hydration reaction of calcium sulfate hemihydrate CaSO4·0,5H2O is studied under standard conditions (e.g., liquid/solid mass ratio, temperature and pressure), in order to develop multi-physic and multi-scale characterization techniques in-situ and ex-situ to monitor the evolution of:- the phase composition (rate of dissolution and precipitation) using calorimetric measurements, X-ray diffraction and Fourier-transform infrared spectrophotometry techniques;- the microstructure using scanning electron microscopy and X-ray microtomography;- the mechanical properties using ultrasonic propagation velocity measurement, shear and compressive dynamic mechanical analysis and compressive strength testing. This panel of techniques enabled to monitor and to correlate the various physical transitions occurring during the setting reaction, and thus to draw a global picture of the on-going phenomena
Bouguerra, Hafid. « Prévision du potentiel de liquéfaction des sites sableux à l'aide d'appareillages in-situ ». Grenoble INPG, 1997. http://www.theses.fr/1997INPG0003.
Texte intégralGuillon, Théophile. « Comportement hydromécanique des argilites du Callovo-Oxfordien lors de cycles de désaturation-resaturation ». Thesis, Vandoeuvre-les-Nancy, INPL, 2011. http://www.theses.fr/2011INPL101N/document.
Texte intégralThe Callovo-Oxfordian claystones’ properties make them reliable as a geological barrier for the confinement of radioactive wastes. In order to optimally predict their behavior, how they respond to various short and long terms loadings has to be studied. Particularly during the exploitation phase, air is continuously ventilated throughout the galleries. The climatic properties of this air are not balanced with those of the rock, and may perturb its hydromechanical (HM) attributes. Thus, assessing the HM response of the rock under hydric loading seems to be a priority.This dissertation begins with laboratory tests to propose an appropriate physical model. Drying tests were studied as they focus on the HM response of samples undergoing hydric loadings. A first 2D isotropic model is proposed, and then enhanced to 3D by considering a transversely isotropic Young modulus. Secondly, experimental results provide relevant data to estimate poroelastic and transport parameters involved in the model. Estimation is achieved according to an inverse procedure, which minimizes the error between measurements and model predictions. Finally, a real-size test is simulated using 2D models: an isotropic plastic one and a transversely isotropic elastic one.Model predictions reproduce well the laboratory tests data. When simulating the in situ behavior, a rather good agreement is obtained between the numerical and experimental results (although using the parameters estimated at the laboratory scale). However, the model highlights a limited influence of plasticity in the laboratory tests, while dissipative phenomena obviously occur in situ. 3D laboratory simulations do not improve the precision of 2D results, but reproduce more experimental data (mass variations, axial and lateral strains). Moreover, the inversion process is more efficient when ran over various kinds of data. Furthermore, stability of the algorithm is improved when adopting a two-phase convergence (simplex, followed by a gradient-like method). Numerical estimates of the parameters are in agreement with the direct experimental measurements obtained through other tests
Zaragoci, Jean-François. « Simulation numérique directe multiphasique de la déformation d’un alliage Al-Cu à l’état pâteux – Comparaison avec des observations par tomographie aux rayons X in situ en temps réel ». Thesis, Paris, ENMP, 2012. http://www.theses.fr/2012ENMP0088/document.
Texte intégralHot tearing is a major defect arising during solidification of aluminium alloys. This defect is associated with the inability of liquid to feed areas where voids have started to appear, not allowing to heal small defects before they grow bigger. To understand hot tearing, it is mandatory to develop a good knowledge of the semi-solid mechanical behaviour. It is thus very useful to carry out X-ray microtomographies experiments and mechanical simulations on representative elementary volumes. In this work, we couple the both approaches by initialising a finite element simulation with the help of microtomography data obtained during an isothermal tensile testing of an aluminium-copper alloy in the mushy state. This innovative approach gives a direct access to the experimental reality and allows comparisons of numerical and experimental evolutions of the sample. We explain in a first time how to get the numerical representation thanks to a marching cubes algorithm and the immersed volume method. Then, we present our numerical model for which we solve the Stokes equations in a monolithic way. Once the velocity computed in all the solid, liquid and gaseous phases, we use a level set method in a Eulerian formalism to obtain the morphological evolution of our numerical sample. Despite the model simplicity, numerical and experimental results show a reasonable agreement concerning the air propagation inside the sample
Ahmad, Naveed. « Measurement of energy performance : Analysis of QUB method ». Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI051.
Texte intégralQUB is a dynamic in-situ thermal characterization test method that has the potential to be conducted in a short duration of one to two nights. The robustness of QUB method with uncertainty in power level (during QUB heating phase), uncertainty in overall heat transfer coefficient at steady state, H_ref, and the outdoor temperatures a function of seasons needs to be established for real buildings.A dynamic state-space model is developed in this thesis to simulate QUB experiments. The state-space modelling involves generating a thermal circuit for each component of the building (walls, fenestration, ventilation system, etc.). The thermal circuits are then assembled to generate a single circuit for the entire building. The state-space model developed, is validated using thermal characteristics and measured data of a full-scale house (the twin house) provided by IEA EBC Annex 58. The numerical simulations of the QUB experiments on a house show that the method has only slight variation with uncertainty in power; for example, 30% error in optimum power can cause an error within 3 % of the reference value. A posteriori error analysis is performed by simulating QUB experiments in situations in which the real envelope has different characteristics than those assumed in the design of the experiment for QUB method. These results are then compared with a priori errors, a situation in which QUB experiments are performed with the knowledge of the real envelope. The error analysis shows that with 50 % error in the overall heat transfer coefficient (i.e. missing wall insulation situation), the QUB method results in an increased error of only 3¬¬ %. The precision of QUB method was tested also with the variation of solar radiation. QUB results on cloudy days show lesser variation as compared to sunny days. It was shown that the heat transfer from the delayed solar radiations entering through the walls of the building has an effect on the temperature evolution during the QUB experiment. This can lead to an increased error in QUB method. The QUB experiments are simulated during summer and winter to determine the impact of seasons on the accuracy of the method. The winter season shows more robust results as compared to summer months. The summer months show larger variation of results. It is verified that the large variation are due to small temperature difference between indoor and outdoor conditions during some of the summer nights. The experiments in summer season can be improved by increasing the set point temperature before the QUB experiment
Verguin, Dulieux Pascale. « Industrialisation d'une méthode de localisation de défauts sur circuits intégrés par cristaux liquides ». Grenoble INPG, 1994. http://www.theses.fr/1994INPG0177.
Texte intégralPotier, Bruno. « Détermination des champs des températures et des concentrations dans une flamme de charbon pulvérisé de taille semi-industrielle : application au four pilote 1 mw du cerchar ». Orléans, 1986. http://www.theses.fr/1986ORLE0012.
Texte intégralChien-TaiShih et 施健泰. « The In Situ Test, Analysis and Application of Seismic Retrofitting Methods of Typical School Buildings ». Thesis, 2014. http://ndltd.ncl.edu.tw/handle/34372168386854158219.
Texte intégral國立成功大學
土木工程學系
102
The seismic resistance capacities of typical I-shape low-rise RC school buildings are limited along the parallel-corridor direction; this phenomenon is crucially non-negligible in terms of seismic retrofitting design. To truly realize details of construction as well as retrofitting benefits, the in-situ push-over tests will be a better strategy to prevent ‘downscaling effect’ and obtain the most direct-and -reliable retrofitting verification. In this study, both in-situ push-over experiments and their corresponding numerical (ABAQUS) simulations are used to investigate the differences of structural behaviors before and after retrofitting. From the observations in this study, it is recommended to add ‘construction-time- modulating factor’ as well as using confined concrete value ( value depends on the reset of stirrups) to carry out push-over analysis. The comparison of each experimental specimen’s seismic capacity as well as their analytical results show that RC jacketing columns, the steel channel adhered to the existing RC columns of external steel-framing system, and column frame retrofitted specimens have both precise prediction and effectively improved strength and ductility when analyzing force behavior of columns and its failure mode, and the two results can provide low-rise RC school buildings with available reinforcement methods: the former one is applicable to existing school buildings with smaller , whereas the latter one is to larger buildings.
Livres sur le sujet "In-Situ-Test methods"
Liaqat, Ali, Changsha li gong da xue., American Society of Civil Engineers. Geo-Institute. et GeoHunan International Conference on Challenges and Recent Advances in Pavement Technologies and Transportation Geotechnics (2009 : Changsha, Hunan Sheng, China), dir. Recent advancement in soil behavior, in situ test methods, pile foundations, and tunneling : Selected papers from the 2009 GeoHunan International Conference, August 3-6, 2009, Changsha, Hunan, China. Reston, Va : American Society of Civil Engineers, 2009.
Trouver le texte intégralLiaqat, Ali, Changsha li gong da xue., American Society of Civil Engineers. Geo-Institute. et GeoHunan International Conference on Challenges and Recent Advances in Pavement Technologies and Transportation Geotechnics (2009 : Changsha, Hunan Sheng, China), dir. Recent advancement in soil behavior, in situ test methods, pile foundations, and tunneling : Selected papers from the 2009 GeoHunan International Conference, August 3-6, 2009, Changsha, Hunan, China. Reston, Va : American Society of Civil Engineers, 2009.
Trouver le texte intégralRecent advancement in soil behavior, in situ test methods, pile foundations, and tunneling : Selected papers from the 2009 GeoHunan International Conference, August 3-6, 2009, Changsha, Hunan, China. Reston, Va : American Society of Civil Engineers, 2009.
Trouver le texte intégralRecent advancement in soil behavior, in situ test methods, pile foundations, and tunneling : Selected papers from the 2009 GeoHunan International Conference, August 3-6, 2009, Changsha, Hunan, China. Reston, Va : American Society of Civil Engineers, 2009.
Trouver le texte intégralLutenegger, Alan J. In Situ Testing Methods in Geotechnical Engineering. Taylor & Francis Group, 2021.
Trouver le texte intégralLutenegger, Alan J. In Situ Testing Methods in Geotechnical Engineering. Taylor & Francis Group, 2021.
Trouver le texte intégralLutenegger, Alan J. In Situ Testing Methods in Geotechnical Engineering. CRC Press LLC, 2022.
Trouver le texte intégralChapitres de livres sur le sujet "In-Situ-Test methods"
Nautiyal, Pranjal, Benjamin Boesl et Arvind Agarwal. « Test Methods for In-Situ Mechanical Characterization ». Dans In-situ Mechanics of Materials, 75–112. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43320-8_3.
Texte intégralDecordier, Ilse, et Micheline Kirsch-Volders. « Fluorescence In Situ Hybridization (FISH) Technique for the Micronucleus Test ». Dans Methods in Molecular Biology, 237–44. Totowa, NJ : Humana Press, 2013. http://dx.doi.org/10.1007/978-1-62703-529-3_12.
Texte intégralLutenegger, Alan J. « Dilatometer Test (DMT) ». Dans In Situ Testing Methods in Geotechnical Engineering, 195–253. First edition. | Boca Raton, FL : CRC Press, 2021. : CRC Press, 2021. http://dx.doi.org/10.1201/9781003002017-6.
Texte intégralLutenegger, Alan J. « Pressuremeter Test (PMT) ». Dans In Situ Testing Methods in Geotechnical Engineering, 255–89. First edition. | Boca Raton, FL : CRC Press, 2021. : CRC Press, 2021. http://dx.doi.org/10.1201/9781003002017-7.
Texte intégralLutenegger, Alan J. « Plate Load Test (PLT) and Screw Plate Load Test (SPLT) ». Dans In Situ Testing Methods in Geotechnical Engineering, 307–31. First edition. | Boca Raton, FL : CRC Press, 2021. : CRC Press, 2021. http://dx.doi.org/10.1201/9781003002017-9.
Texte intégralLutenegger, Alan J. « Borehole Shear Test (BST) ». Dans In Situ Testing Methods in Geotechnical Engineering, 291–306. First edition. | Boca Raton, FL : CRC Press, 2021. : CRC Press, 2021. http://dx.doi.org/10.1201/9781003002017-8.
Texte intégralLutenegger, Alan J. « Field Vane Test (FVT) ». Dans In Situ Testing Methods in Geotechnical Engineering, 167–94. First edition. | Boca Raton, FL : CRC Press, 2021. : CRC Press, 2021. http://dx.doi.org/10.1201/9781003002017-5.
Texte intégralLutenegger, Alan J. « Standard Penetration Test (SPT) ». Dans In Situ Testing Methods in Geotechnical Engineering, 13–72. First edition. | Boca Raton, FL : CRC Press, 2021. : CRC Press, 2021. http://dx.doi.org/10.1201/9781003002017-2.
Texte intégralLutenegger, Alan J. « Dynamic Cone Penetration Test (DCP) ». Dans In Situ Testing Methods in Geotechnical Engineering, 73–101. First edition. | Boca Raton, FL : CRC Press, 2021. : CRC Press, 2021. http://dx.doi.org/10.1201/9781003002017-3.
Texte intégralWeidner, Anja, Alexander Schmiedel, Mikhail Seleznev et Horst Biermann. « Influence of Internal Defects on the Fatigue Life of Steel and Aluminum Alloys in the VHCF Range ». Dans Multifunctional Ceramic Filter Systems for Metal Melt Filtration, 605–43. Cham : Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-40930-1_24.
Texte intégralActes de conférences sur le sujet "In-Situ-Test methods"
Tetteh, Edem Y., Michael W. Jeong et Eric Loth. « Ice Shear Adhesion Test Methods Review and New In Situ Test Method ». Dans AIAA Scitech 2021 Forum. Reston, Virginia : American Institute of Aeronautics and Astronautics, 2021. http://dx.doi.org/10.2514/6.2021-0508.
Texte intégralAnderson, Justin S., et Jerry G. Rose. « In-Situ Test Measurement Techniques Within Railway Track Structures ». Dans IEEE/ASME/ASCE 2008 Joint Rail Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/jrc2008-63047.
Texte intégralGupta, Raj K. « In-Situ Test Structures for Metrological and Mechanical Characterization of MEMS ». Dans ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-1149.
Texte intégralKöhler, D. « Comparison of ex- and in-situ investigations of clinched single-lap shear specimens ». Dans Sheet Metal 2023. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902417-20.
Texte intégralWang, Jinxun, Abdulkareem M. AlSofi, Yara A. Alzahid et Abdullah M. Boqmi. « Evaluating In-Situ Gelation Property for Conformance Improvement ». Dans SPE Asia Pacific Oil & Gas Conference and Exhibition. SPE, 2022. http://dx.doi.org/10.2118/210637-ms.
Texte intégralLevine, Philip, et Leonard C. Angello. « Test Protocols for Combustion Turbine Inlet Cooling Foggers ». Dans ASME Turbo Expo 2005 : Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68602.
Texte intégralLe Crom, Izan, Yves Perignon, Jean-Baptiste Saulnier et Christian Berhault. « Extreme Sea Conditions in Shallow Water : Estimations Based on In-Situ Measurements ». Dans ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-10752.
Texte intégralLin, Kunyang, Wenhu Wang, Ruisong Jiang, Xiaofen Liu, Xiaoxiang Zhu et Zhanfei Zhang. « Two Methods for the Constitutive Modeling of TiB2/7050 Al Composites ». Dans ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-11034.
Texte intégralDikici, B., C. Tekmen, M. Gavgali, Y. Tsunekawa et M. Okumiya. « Corrosion Behavior of In-Situ AI2O3 Formed Composite Coating by DC Plasma Spraying ». Dans ITSC2008, sous la direction de B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima et G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p1480.
Texte intégralVIRSIS, Endijs, et Ainars PAEGLITIS. « Analysis of physical and mechanical soil properties determined using probing data interpretations ». Dans 12th International Conference “Environmental Engineering”. VILNIUS TECH, 2023. http://dx.doi.org/10.3846/enviro.2023.877.
Texte intégralRapports d'organisations sur le sujet "In-Situ-Test methods"
Fahr, Sven, Daniel Tschopp, Jan Erik Nielsen, Korbinian Kramer et Philip Ohnewein. Review of In Situ Test Methods for Solar Collectors and Solar Collector Arrays. IEA SHC Task 55, décembre 2020. http://dx.doi.org/10.18777/ieashc-task55-2020-0014.
Texte intégralCorscadden, Louise, et Anjali Singh. Grip Strength Test In Rodents. ConductScience, janvier 2023. http://dx.doi.org/10.55157/cs2023109.
Texte intégralKrumme, M., D. Dwyer, S. Thiem, J. Tiedje et R. Smith. Aquifer microcosms and in situ methods to test the fate and function of pollutant-degrading microorganisms. Office of Scientific and Technical Information (OSTI), janvier 1990. http://dx.doi.org/10.2172/6906240.
Texte intégralGummow et Segall. L51799 In-Situ Evaluation of Directional Drill-Bore Coating Quality. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), octobre 1998. http://dx.doi.org/10.55274/r0010665.
Texte intégralMeißner, Frank, Heike Sonntag et Anita Morandell-Meißner. Water uptake measurement for thermal renovations – comparison between non-destructive method, the Karsten tube, and automatic laboratory measurements. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541652209.
Texte intégralHair. L51836 Coating Requirements for Pipelines Installed by Horizontal Directional Drilling and Slip Boring. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), juillet 2000. http://dx.doi.org/10.55274/r0010144.
Texte intégralRobinett, Fred. PR-471-14207-Z03 Evaluation of Field Pump Performance Testing Procedure. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), août 2019. http://dx.doi.org/10.55274/r0011616.
Texte intégralArnett, Clint, et Rebekah Wilson. Evaluation of a visible light responsive photocatalytic coating to resist microbial contamination and increase indoor air quality. Engineer Research and Development Center (U.S.), septembre 2023. http://dx.doi.org/10.21079/11681/47644.
Texte intégralSteudlein, Armin, Besrat Alemu, T. Matthew Evans, Steven Kramer, Jonathan Stewart, Kristin Ulmer et Katerina Ziotopoulou. PEER Workshop on Liquefaction Susceptibility. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, mai 2023. http://dx.doi.org/10.55461/bpsk6314.
Texte intégralClark, Hart et Beavers. L52030 In-Situ Pipeline Mechanical Property Characterization. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), mars 2005. http://dx.doi.org/10.55274/r0011148.
Texte intégral