Articles de revues : « IK. Design, development, implementation and maintenance »

1

Li, Hong Peng, Shu Li, Ying Jun Lv, Yuan Da Wang et Jin Qing Lin. « Design and Implementation of Virtual Maintenance Training System Based on Ngrain Aviation Equipment ». Applied Mechanics and Materials 300-301 (février 2013) : 693–97. http://dx.doi.org/10.4028/www.scientific.net/amm.300-301.693.

Texte intégral

Résumé :

Virtual maintenance training is playing a more and more important role in aircraft equipment maintenance training. But there are usually some questions such as long period and high cost in the process of virtual maintenance development. It is an effective method to solve above problems by Ngrain during the process of virtual maintenance development. This paper introduces the process of virtual maintenance application development based on Ngrain, and analyses advantages of the software in development. In the end, this paper discusses the key technology and evaluates the method by a case of aircraft virtual maintenance software development.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Makate, Clifton. « Local institutions and indigenous knowledge in adoption and scaling of climate-smart agricultural innovations among sub-Saharan smallholder farmers ». International Journal of Climate Change Strategies and Management 12, n^o 2 (19 décembre 2019) : 270–87. http://dx.doi.org/10.1108/ijccsm-07-2018-0055.

Texte intégral

Résumé :

Purpose The purpose of this study is to discuss how enhancing the role of local institutions (LI) and incorporating indigenous knowledge (IK) in climate change adaptation planning can improve adoption and scaling success of climate-smart agriculture innovations. Design/methodology/approach A review of relevant literature from sub-Saharan Africa was used to answer the study research questions. Findings Embracing IK and LI in climate change adaptation projects can enhance adoption and scaling success of climate-smart agriculture innovations in smallholder farming. Such efforts will improve: information gathering and dissemination, mobilization of resources, establishment of useful networks with relevant stakeholders, capacity building farmers on various fronts and provision of leadership in climate adaptation programs. Practical implications Fully embracing IK and LI can improve the scaling of climate-smart innovations only if development partners recognize IK systems that are to be transformed and build on them instead of trying to replace them. Also, participatory approaches in scaling innovations will enhance input from rural people in climate change adaptation programs. Originality/value Development interventions aimed at taking proven effective climate-smart innovations to scale must, therefore, engage local communities and their indigenous institutions as active stakeholders in designing, planning and implementation of their climate adaptation programs.

Styles APA, Harvard, Vancouver, ISO, etc.

3

Gao, Zhen Dong. « Design and Implementation of System Framework Based on Web ». Advanced Materials Research 945-949 (juin 2014) : 3353–55. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.3353.

Texte intégral

Résumé :

In the current implementation in the form of software,Web-based B/S structure has been a wide range of applications.With the gradual expansion of the scale of software for such systems need to have a good framework to support the development and maintenance processes. Quality system plays an important role in the whole system.This paper describes the design process of a good Web-based system framework from the perspective of practical application.Through practice, this framework can well support large-scale software development and maintenance process, the various types of cost savings for the enterprise.

Styles APA, Harvard, Vancouver, ISO, etc.

4

He, Guo Xiang. « Design and Development of the Enterprise Asset Management System Based on EAM ». Applied Mechanics and Materials 416-417 (septembre 2013) : 2066–71. http://dx.doi.org/10.4028/www.scientific.net/amm.416-417.2066.

Texte intégral

Résumé :

The paper describe the EAM function by proposing the main modules and major business processes, abstracting the main business processes.it implements preventive maintenance of assets, assets track, the whole process of life-cycle management based on the equipment,asset account and treat management maintenance as the core, the submission, approval,implementation of work order as main line. EAM can effectively improve the efficiency of equipment maintenance, reduce maintenance and repair costs, improve asset reliability and value.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Dong, Biao. « Design and Implementation of Middleware for Wireless Sensor Networks ». Applied Mechanics and Materials 530-531 (février 2014) : 19–22. http://dx.doi.org/10.4028/www.scientific.net/amm.530-531.19.

Texte intégral

Résumé :

Middleware supports programming abstract which facilitate the programmer task and bridge the gap between the application and the hardware. Middleware for wireless sensor networks (WSNs) can help bridge the gap and remove impediments. This paper designs GWSN, a middleware WSNs, whose architecture is composed of runtime support, application development kits, and software development kits. Runtime support in GWSN is the core of WSNs middleware and supports executing and maintenance of WSNs applications. Application development kits includes many basic function kits, such as display editor, rule editor, and workflow editor, which support the application development of WSNs. Software development kits provides easy-to-use application programming interface.

Styles APA, Harvard, Vancouver, ISO, etc.

6

Wang, Litao. « Design and Implementation of Welding Robot Based on PLC ». ITM Web of Conferences 25 (2019) : 02006. http://dx.doi.org/10.1051/itmconf/20192502006.

Texte intégral

Résumé :

With the development of the revolutionary tide of new technology, our production scale is gradually expanding. Manual production has been unable to meet the requirements of industrial production. In order to improve production efficiency and welding quality, we developed a welding robot. Because it has the characteristics of high production efficiency, stable welding quality and large practical demand. It is developing most rapidly. With the development of PLC technology, we gradually apply it to the development of welding robot. Its advantages of good ductility, low cost and convenient maintenance can bring great value to industrial production.

Styles APA, Harvard, Vancouver, ISO, etc.

7

Feng, Lei. « Development and Implementation of Ship Maintenance Management Spot Inspection Information System ». Applied Mechanics and Materials 644-650 (septembre 2014) : 6233–37. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.6233.

Texte intégral

Résumé :

A engineering ship as the object, This paper analyzed the application of equipment Inspection, and discussed the PDCA management system, developed a set of spot inspection Information system based on the web server application & intelligent mobile terminal application which has the current system better regulated. Introduced the development background, expounded the system structure, functions and technology solutions, and discussed the main functions of the system design scheme.

Styles APA, Harvard, Vancouver, ISO, etc.

8

Liu, Jun Xian, Wei Zhang, Quan Zhi Zhou, Xiao Fang Lou et Xu Fei. « Design and Implementation of Router Configuration Software in the Information System ». Applied Mechanics and Materials 513-517 (février 2014) : 1586–89. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.1586.

Texte intégral

Résumé :

Due to the complexity of the router, its professional configuration leads to the phenomenon that operation and maintenance personnel of the information systems can not be competent for the configuration tasks. In order to lower the practitioner threshold of their operating and maintenance personnel, a WYSIWYG router configuration software in graphical interface needs to be developed. With the reduced quality requirements of employees, the main functions of the router configuration are achieved. This article describes the development and design of this kind of configuration software.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Zhou, Jing Tao, Huai Guang Wang, Guo Quan Ren et Feng Li Cao. « Vehicle Design and Realization of Virtual Maintenance Training System ». Advanced Materials Research 694-697 (mai 2013) : 2449–53. http://dx.doi.org/10.4028/www.scientific.net/amr.694-697.2449.

Texte intégral

Résumé :

This article in view of the problem that the traditional maintenance training methods and means can't adapt to the development of vehicles, based on EON and virtual maintenance training platform, by using virtual reality (VR) which has developed a set of interactive virtual maintenance training system for vehicles. The system on the basis of analysis virtual maintenance training system function and information needs, constructed the system framework, established the key technology and implementation scheme of the system, and studies the process and function of maintenance training system, confirmed the grading rules, grading standards and evaluation standards, including key technology. The development of this system has great practical significance to improve the training effect, effectively solved the problem of high cost and low efficiency in teaching training.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Yang, Chun Yan. « Design and Implementation of University Administrative Management System ». Applied Mechanics and Materials 599-601 (août 2014) : 2104–7. http://dx.doi.org/10.4028/www.scientific.net/amm.599-601.2104.

Texte intégral

Résumé :

This system combines the actual administrative system , after the actual needs analysis, using the powerful Visual Basic 6.0 development tools and developed as a stand-alone management system. The entire system from the simple , user-friendly, flexible , practical and safety requirements , the management system has the following features: input, modify employees' basic information , query, delete module , employee leave of information input, modify, query , delete module , entry employee salary information , calculations, queries, and users of the system settings and system maintenance functions.

Styles APA, Harvard, Vancouver, ISO, etc.

11

Zhang, Dong Sheng, et Fu Cheng You. « The Design and Implementation of Collaborative Editing System Based on SaaS ». Advanced Engineering Forum 6-7 (septembre 2012) : 1061–65. http://dx.doi.org/10.4028/www.scientific.net/aef.6-7.1061.

Texte intégral

Résumé :

In recent years, collaborative editing system that is an important application of Computer Supported Cooperative Work field has made a lot of progress. But most of the collaborative editing systems have the disadvantages about maintenance and huge investment etc. In order to solve these problems, this paper proposes a collaborative editing system based on SaaS(Software as a Service). The realization of the system includes the following aspects: (1) Introducing and analyzing SaaS cloud computing model; (2) Designing the message model and communication model of collaborative editing system; (3) Setting up the SaaS development environment; (4) Designing and realizing a collaborative editing system based on the SaaS model. The collaborative editing system based on SaaS can not only support the cross-platform operation, but also reduce development cost and it's convenient for the system maintenance and upgrade.

Styles APA, Harvard, Vancouver, ISO, etc.

12

Phogat, Sandeep, et Anil Kumar Gupta. « Development of framework for just-in-time implementation in maintenance ». Journal of Quality in Maintenance Engineering 24, n^o 4 (8 octobre 2018) : 488–510. http://dx.doi.org/10.1108/jqme-08-2017-0052.

Texte intégral

Résumé :

Purpose The purpose of this paper is to propose an interpretive structural modeling (ISM) model which highlights the relationships between the identified just-in-time (JIT) elements useful for the implementation of JIT in maintenance and understand mutual influences of these identified JIT elements on JIT implementation in maintenance. Further, this paper seeks to identify dependence power and driving power of identified JIT elements using an ISM and Matrice d’Impacts Croisés Multiplication Appliquée á un Classement (MICMAC) analysis. Design/methodology/approach The methodology used in the paper is ISM with a view to evolving mutual relationships among JIT elements. The identified JIT elements have been further classified, based on their dependence power and driving power using MICMAC analysis. Findings This paper has developed the relationships among 16 identified JIT elements using the ISM methodology. Further, this paper analyses the driving power and dependence power of identified JIT elements with the help of MICMAC analysis. The incorporated approach is developed here, as the ISM provides only binary correlation among identified JIT elements. The MICMAC analysis is adopted here as it is useful in specific examination related to driving and the dependence power of identified JIT elements. The ISM developed model and MICMAC analysis finding are validated with the help of industrial experts. Research limitations/implications The weightage and validation for the ISM and MICMAC analysis are obtained throughout the opinion of academics and industry experts. Further hypothesis may be conducted to examine the validity of the planned model, and structural model may also be validated statistically with the help of structural equation modeling. Practical implications The ISM model development and MICMAC analysis of identified JIT elements provide academics and maintenance managers a macro picture of the profits gained by the organizations by the implementation of JIT in maintenance of an organization. Originality/value The results will be useful for maintenance managers to understand the process of implementation of JIT in maintenance and to gain benefits after the implementation of JIT in maintenance of an organization.

Styles APA, Harvard, Vancouver, ISO, etc.

13

Yaloza, Yu A., et A. N. Petrov. « PERSPECTIVES OF THE METHODS DEVELOPMENT FOR AIRCRAFT MAINTAINABILITY CERTIFICATION ». Civil Aviation High TECHNOLOGIES 21, n^o 4 (28 août 2018) : 110–22. http://dx.doi.org/10.26467/2079-0619-2018-21-4-110-122.

Texte intégral

Résumé :

The paper outlines the main problems and perspectives of methods development for regulation and finding compliance of aircraft during the type design maintainability certification. Mentioned requirements and methods relevance are related to the fact that aircraft continuing airworthiness at the operational stage is possible only with a reasonable combination of the maintenance documentation instructions for continuing airworthiness of a type design and the required level of its maintainability, which both meet the minimum requirements of airworthiness standards. Deficiencies in those requirements and means of compliance have notable influence on the safety and effectiveness of air transportation. Main ICAO standards and international practice of regulation and evaluation of aircraft maintainability and instructions for continuing airworthiness are briefly analyzed. On the base of aircraft maintenance requirements analysis recommendations proposed aimed to further develop regulations and means of compliance for a type design maintainability certification. For solving this problem there is a need to implement certain scientific and practical developments in the domain of integrated logistic support as a technology which integrates the reliability, maintainability and other technical operating capabilities activities for a newly-designed aircraft in order to create its effective maintenance system. The kinds of requirements within the aviation regulations and means of compliance for them are recommended, which have to be corrected and developed, as well as directions of works necessary for that, including implementation of computer modelling and prototypes testing for showing compliance of aircraft with the maintainability certification requirements. It is shown a need for implementation of the scientific and practical results of research in integrated logistic support domain which allow for interconnect of the reliability and maintainability activities within a new aircraft design in order to integrate systematically reliability requirements with the necessary maintenance action in support of reliability and with the required for those maintenance works level of type design maintainability.

Styles APA, Harvard, Vancouver, ISO, etc.

14

Ismail, Zul-Atfi. « An Integrated Computerised Maintenance Management System (I-CMMS) for IBS building maintenance ». International Journal of Building Pathology and Adaptation 37, n^o 3 (10 juin 2019) : 326–43. http://dx.doi.org/10.1108/ijbpa-10-2017-0049.

Texte intégral

Résumé :

Purpose The purpose of this paper is to focus on the development of an integrated computerised maintenance management system to improve the information storage of design and construction, diagnostic and defect risk assessments on IBS building through the integration of building information modelling (BIM). Design/methodology/approach The methodology used interviews with the IBS building client/maintenance contractor in Malaysia to gather information about maintenance management problems, approaches to address problems, information and communication technology implementation and use of emerging technologies, in addition to prototyping a system development life cycle for system development. Findings Relevant process flowchart documents of system development were obtained from the case study and reviewed to assist in providing an automation technique for decision-making and structural defect diagnostic operation through the integration of Visual Basic.Net, MS Access and Autodesk Revit software. Originality/value This research focuses on automatic bidirectional communications between an Expert System and BIM on a database level. Adoption of the approaches suggested in the research will enable the system to promote the development of zero IBS building maintenance.

Styles APA, Harvard, Vancouver, ISO, etc.

15

Prasetyo, Dimas Bagus, et Lily Wulandari. « THE DEVELOPMENT OF LOCATION BASED SERVICES MOBILE APPLICATION FOR PROVIDING HEALTH FACILITIES INFORMATION IN SOUTH JAKARTA ». Jurnal Ilmiah Informatika Komputer 23, n^o 2 (2018) : 107–15. http://dx.doi.org/10.35760/ik.2018.v23i2.2352.

Texte intégral

Résumé :

Location based services application for Android devices can help users to know the location of health facilities that are located in South Jakarta area quickly and efficiently. Through smartphone or Android-based mobile devices that have been connected to the Internet network, the user directly treated display a map showing the location of where users are located with a radius as a reference to show the location of the nearest health facilities of the location user. Software development model used to build applications in this research is a prototyping model. The steps taken include planning, data collection, requirement analysis, application design, implementation, and testing. Application testing has been done in two ways, namely using black box testing and user acceptance testing. The testing results of applications using black box testing performed on five Android mobile devices, and the results obtained show that the application can be run properly. Results obtained after rounding is 4.00, so it can be concluded that the user approve this application easy to use and can help in finding information about health facilities.

Styles APA, Harvard, Vancouver, ISO, etc.

16

Aryaningrum, Dwi Endah, Yusuf Latief, Leni Sagita Riantini et Budi Susilo. « Development of Implementation Guidlines for Maintenance, Repairation and Determine Material Spesifications for Mechanical Component Design in Government Own Green Building Based On Work Breakdown Structure ». MATEC Web of Conferences 206 (2018) : 02014. http://dx.doi.org/10.1051/matecconf/201820602014.

Texte intégral

Résumé :

The development of green buildings has become a global issue as global climate change is gradually becoming a serious concern for the future. Government buildings can be categorized as buildings that must comply with green building requirements, because they consume energy, water and other resources with large quantities. The absence of guidelines in maintenance and repair of government buildings will have an impact on the security and comfort of building users. In addition, the absence of guidance regarding the material specifications used will also result in a material stock system for maintenance and repair being ineffective. This study discusses the development of implementation guidelines for maintenance, reparation and determine material specifications for mechanical components design in government own green buildings based on work breakdown structure. This research will detail starting from the sub work section, work package, alternative design, implementation requirements, activities, resources and material specifications. With the implementation guidelines for maintenance, reparation and determine material specifications for mechanical components design in government own green buildings based on work breakdown structure (WBS) expected maintenance and reparation of government buildings can be implemented maximally, according to specifications and functions.

Styles APA, Harvard, Vancouver, ISO, etc.

17

Shao, Meng Liang. « The Design and Implementation of a Cross Platform Multimedia NetWork Classroom ». Applied Mechanics and Materials 596 (juillet 2014) : 931–35. http://dx.doi.org/10.4028/www.scientific.net/amm.596.931.

Texte intégral

Résumé :

For the sake of the technology of multimedia network classroom under cross-platforms is becoming popular, this paper propose a analytic selection on system architecture and the development solution on the multimedia network classroom for the experence and requirement from teaching activity. We chooses Java for system design and implementation to achieve the goal of crossing platform, using the C/S communicating paradigm, MVC model, and giving the detailed description on the development to some key modulars such as connection with maintenance, screen broadcast, file transfer and remote control.

Styles APA, Harvard, Vancouver, ISO, etc.

18

Li, Hui. « The Development of a Human Resource Management System ». Advanced Materials Research 926-930 (mai 2014) : 4020–23. http://dx.doi.org/10.4028/www.scientific.net/amr.926-930.4020.

Texte intégral

Résumé :

This paper mainly introduces the analysis, design and implementation of human resources management system. To the characteristics of Human Resources Management, we make a trade off aspects of architecture, system design analysis, databases design and data exchange with other systems. The purpose is to establish a system with soundly security, flexibility to expand, facilitate the maintenance. Firstly, we discuss the basis of the theory and knowledge of the corporate human resources management system; and then targeted human resources management system itself to the outside business system interface features, we specifically describe the human resources Web application framework of the functional requirements; and based on J2EE standard system architecture, we describe the design and implementation of the application development environment and core technology at all levels.

Styles APA, Harvard, Vancouver, ISO, etc.

19

El Akkaoui, Zineb, Esteban Zimányi, Jose-Norberto Mazón et Juan Trujillo. « A BPMN-Based Design and Maintenance Framework for ETL Processes ». International Journal of Data Warehousing and Mining 9, n^o 3 (juillet 2013) : 46–72. http://dx.doi.org/10.4018/jdwm.2013070103.

Texte intégral

Résumé :

Business Intelligence (BI) applications require the design, implementation, and maintenance of processes that extract, transform, and load suitable data for analysis. The development of these processes (known as ETL) is an inherently complex problem that is typically costly and time consuming. In a previous work, the authors have proposed a vendor-independent language for reducing the design complexity due to disparate ETL languages tailored to specific design tools with steep learning curves. Nevertheless, the designer still faces two major issues during the development of ETL processes: (i) how to implement the designed processes in an executable language, and (ii) how to maintain the implementation when the organization data infrastructure evolves. In this paper, the authors propose a model-driven framework that provides automatic code generation capability and ameliorate maintenance support of our ETL language. They present a set of model-to-text transformations able to produce code for different ETL commercial tools as well as model-to-model transformations that automatically update the ETL models with the aim of supporting the maintenance of the generated code according to data source evolution. A demonstration using an example is conducted as an initial validation to show that the framework covering modeling, code generation and maintenance could be used in practice.

Styles APA, Harvard, Vancouver, ISO, etc.

20

Jiang, Lan. « A Corporate Computer Network Security System Design and Implementation ». Advanced Materials Research 1044-1045 (octobre 2014) : 965–67. http://dx.doi.org/10.4028/www.scientific.net/amr.1044-1045.965.

Texte intégral

Résumé :

With the rapid development of economy and society, the growing prosperous computer network technology has now become one of the indispensable elements in human life. Small to every household personal computer systems, large to computer systems concerned countries, they are incorporated into the scope of computer network security systems. Enterprises are social living cells, with important role of financial intermediation, the mining technology and training personnel. Corporate computer systems is an important part to ensure high-speed operation of enterprises, summarize business information and protect trade secrets, therefore, the more developed computer network technology is, the more important the development and maintenance of corporate computer network security systems is. This article will explore the design and function of enterprise computer network security system implementations based on the characteristics of computer network security and enterprise computer network system.

Styles APA, Harvard, Vancouver, ISO, etc.

21

Xu, Zhen Chao, Jian Gang Yao et Yi Long Wei. « Design and Implementation of Visualizing the Intelligent Dispatching and Maintenance Arrangement System for 110kV Power Grid ». Advanced Materials Research 805-806 (septembre 2013) : 1194–97. http://dx.doi.org/10.4028/www.scientific.net/amr.805-806.1194.

Texte intégral

Résumé :

In the context of the rapid growth in electricity demand and the expanding of the power grid, grid dispatching and maintenance is becoming increasingly complex. To improve the dispatching and maintenance scheduling in distribution network, the “Intelligent Dispatching and Maintenance Arrangement System for 110kV Power Grid” was developed. This paper describes the design framework and functions of the system, and also briefly introduces the visual development tools-TWaver. Finally, the implementation of visualizing the real-time dynamic display of network power flow as well as the optimization result of maintenance schedule is given and realized a visual and intelligent mode of dispatching and maintenance scheduling effectively. The system has been put into operation in a grid with a stable and reliable performance, and shows the practicality and effectiveness of the system.

Styles APA, Harvard, Vancouver, ISO, etc.

22

Croucamp, Patrick Lindsay, et Arnesh Telukdarie. « Lean implementation for rail substation processes ». Journal of Quality in Maintenance Engineering 24, n^o 4 (8 octobre 2018) : 468–87. http://dx.doi.org/10.1108/jqme-08-2017-0056.

Texte intégral

Résumé :

Purpose Traction substations are an integral part of the railway infrastructure. In order to ensure that machinery and equipment is available and utilised at full capacity, intelligent maintenance methods should be implemented. The purpose of this paper is to focus on the development of lean maintenance strategies implemented on traction substations and offer the maintenance manager an alternative maintenance method to be utilised during optimisation initiatives. Design/methodology/approach The rail company under consideration has various improvement options, the maintenance supply chain is a priority. The existing maintenance process of 3 kVDC traction substations is examined and all operations and activities directly and indirectly associated with maintenance are analysed with lean methodologies. The analysis of maintenance operations and activities reveals that some of these operations and activities are non-value-adding and, therefore, regarded as waste. These activities only prolong the maintenance process without adding value to the process. Alternative operations and activities are suggested and simulated. Findings The application of lean indicates that the maintenance process could be optimised to deliver on a more efficient process, which would improve the quality of maintenance by ensuring that maintenance is timeously carried out. Through reducing the downtime caused by maintenance, the availability of the system is preserved and the railway lines could be used to capacity. Research limitations/implications The research is limited to 3 kVDC traction substations and the associated maintenance process, as this was the area of opportunity for the company. The track and overhead traction equipment maintenance is not included. Practical implications The practical application of this research is in optimisation of the value chain for maintenance, specifically in the rail industry. Originality/value This research could be applied by maintenance managers to effectively implement if a run-to-failure (RTF) maintenance philosophy is being utilised. The research offers maintenance techniques within the RTF maintenance scope which reduces the maintenance cycle and equipment downtime.

Styles APA, Harvard, Vancouver, ISO, etc.

23

Li, Xin Qiang, Xian Hui Duan, Guo Dong Han et Xu Ning Liu. « Design and Implementation of Jet Loom Network Monitoring Information System ». Applied Mechanics and Materials 543-547 (mars 2014) : 1587–90. http://dx.doi.org/10.4028/www.scientific.net/amm.543-547.1587.

Texte intégral

Résumé :

In order to improve the level of production management and information development of textile industry, firstly the paper analyzed the hardware and software structure of jet loom monitoring system, then carried out related research on the information management of textile industry, introduced the related techniques, implemented the real-time monitoring and control based on CAN bus, data gathering and Winsock technology. The practice has proved that the loom network monitoring information system based on the industrial Ethernet has improved greatly the efficiency of production, and building network is simple, the development and maintenance are easy, and the performance is good and so on, which can provide better realistic instructions on realizing the standardization of communication, automation and information of the textile industry.

Styles APA, Harvard, Vancouver, ISO, etc.

24

Norita, Defi. « Design and Implementation of Inventory Management System in the Analytical Development Laboratory ». International Journal of Advances in Scientific Research and Engineering 09, n^o 01 (2023) : 55–60. http://dx.doi.org/10.31695/ijasre.2023.9.1.7.

Texte intégral

Résumé :

The importance of information technology in a company to support the running of business processes in the company effectively. With the existence of information technology, incoming and outgoing goods can be recorded properly so as to minimize the occurrence of stock outs of goods that are not regulated. Until now, the inventory system in companies, especially in the Analytical Development Laboratory, still uses a manual process, namely using a logbook, starting from usage, purchasing requests and stock-taking processes, which are still done manually. Data collection was carried out by means of observation, interviews, and field studies. The waterfall method used by the authors in this study uses the working principles of this method, namely from needs analysis, design, implementation, verification, and maintenance. The existence of this latest system will further accelerate the processing of raw material information and reduce stock outs at the Analytical Development Laboratory. This system is made using Microsoft Access applications from design to database

Styles APA, Harvard, Vancouver, ISO, etc.

25

Saputra, Indra, Muchlas Muchlas et Bambang Nor Achsan. « Development of Learning Model of Youtube-Based Learning in Light Vehicle Electricity Maintenance Subject ». Journal of Vocational Education Studies 3, n^o 2 (28 novembre 2020) : 119. http://dx.doi.org/10.12928/joves.v3i2.2652.

Texte intégral

Résumé :

This study aims to develop a learning model of Youtube-Based Learning to facilitate the learning habits of digital-age students. This research used the research and development method. The research steps were analysis of potential and problems, data collection, product design, design validation, design revisions, limited implementation test, revisions, implementation tests, revisions, and mass production. Subject research was the students of class XI of Light Vehicle Engineering at SMK Muhammadiyah 1 Playen. Research data collection used closed questionnaire, open questionnaire, and integrated with interviews and observations. The data analysis technique used the effect size test. The results showed that the validity of Youtube-Based Learning included in the very feasible category to apply. The contribution given by Youtube-Based Learning on student learning outcomes was 58%. Other results showed that students and teachers gave positive responses to the learning model of Youtube-Based Learning.

Styles APA, Harvard, Vancouver, ISO, etc.

26

Heathfield, H. A., et J. Wyatt. « Philosophies for the Design and Development of Clinical Decision-Support Systems ». Methods of Information in Medicine 32, n^o 01 (1993) : 01–08. http://dx.doi.org/10.1055/s-0038-1634896.

Texte intégral

Résumé :

Abstract:Little significance is attached by medical informatics workers to the many practical issues which affect the development of clinical decision-support systems. We examine the current state of research in clinical decision-support, the characteristics and motivations of developers, and the perceptions of intended end-users. Factors which adversely affect the success of systems are highlighted and pointers to good practice discussed. We then propose a coherent approach to system development, consisting of requirements analysis, software design, implementation, testing, evaluation and maintenance.

Styles APA, Harvard, Vancouver, ISO, etc.

27

Yang, Yu. « Design and Implementation of Knowledge System of Wireless Communication Equipment Fault Diagnosis ». Advanced Materials Research 945-949 (juin 2014) : 1108–11. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.1108.

Texte intégral

Résumé :

Through analyzing the fault characteristics of the wireless communication equipment and according to the object oriented method, the fault diagnosis model based on knowledge for wireless communication equipment fault characteristics was designed. In order to expand and maintenance knowledge conveniently, and realize the reuse of knowledge, the fault diagnosis model were modeled in the way of domain knowledge, reasoning knowledge and task knowledge according to CommonKADS ideology. In the end VC++6.0 and SQL Server 2005 were used as the development tool and database, the development of prototype system was realized.

Styles APA, Harvard, Vancouver, ISO, etc.

28

Huo, Ruicai. « Design and implementation of multimedia video fusion system ». ITM Web of Conferences 47 (2022) : 01025. http://dx.doi.org/10.1051/itmconf/20224701025.

Texte intégral

Résumé :

With the rapid development of computer network application technology, various video products and video systems are changing with each passing day. The daily internal communication, training and exchange activities mainly use video conference, paperless conference, projection display, large screen splicing display and other video systems for interaction. These systems are developed and run independently and lack system linkage. In addition, due to the disunity of platforms, the system is prone to multiple devices, complex operation and low resource utilization, which increases the operation and maintenance cost. To solve the above problems, a set of multimedia video fusion system is designed to integrate various video systems to achieve unified control of video conference, paperless conference, projection display, large screen display and other systems, effectively support the use of various business scenarios, and achieve the purpose of improving efficiency and reducing costs.

Styles APA, Harvard, Vancouver, ISO, etc.

29

Bin Ismail, Zul-Atfi. « Development of a defect monitoring system (DMOSYS) for building maintenance at polytechnic ». Facilities 36, n^o 7/8 (8 mai 2018) : 403–22. http://dx.doi.org/10.1108/f-09-2016-0090.

Texte intégral

Résumé :

Purpose The current maintenance management method has affected the efficiency of the building facility management at Polytechnics. Many issues such as poor service delivery, inadequate finance, poor maintenance planning and maintenance backlogs have emerged due to the usage of conventional method application (paper-based form and unsystematic database. The purpose of this paper is to review existing literature and case studies project of the technologies in maintenance management at Polytechnic, and subsequently to identify the challenge in improving the current maintenance management technologies. Design/methodology/approach The purpose of this paper is to review existing literature and case studies project of the technologies in maintenance management at Polytechnic, and subsequently to identify the challenges of information and communication technology (ICT) implementation for strategic defect diagnosis and decision-making in improving the current maintenance management technologies. Eight Polytechnics are selected on the basis of the major problems of using the conventional method in the comparison to investigate the maintenance management practices in each Polytechnic. There are around 32 Polytechnics in Malaysia and most are using conventional methods. Findings The findings reveal the need for a more sophisticated maintenance management system that provides guidelines for decision-making processes with the implementation of ICT. The interview results also reveal irregularities within the Malaysian Polytechnics’ maintenance management database. The system architecture and the information system prototype are presented to integrate the information database and maintenance management processes in improving the building diagnosis approach and decision-making process for managing building maintenance. Originality/value This new system is expected to become the successful technology in assisting the maintenance contractors, clients and developer for effective management of maintenance defects at Polytechnic.

Styles APA, Harvard, Vancouver, ISO, etc.

30

Ma, Dong Mei, Hai Ping Zhang, Hong Dan Xue et Ting Zhang. « Research and Implementation of Groundwater Management Information System Based on J2EE ». Advanced Materials Research 989-994 (juillet 2014) : 5491–94. http://dx.doi.org/10.4028/www.scientific.net/amr.989-994.5491.

Texte intégral

Résumé :

The design of groundwater management information system: using Struts Spring and Hibernate framework for system design and application development, according to the three layer design of J2EE,the key technology of every layer of the groundwater management information system was designed. The system functions include the basic data maintenance, data analysis, modeling and integrated management. The system provides management personnel with system level support in the analysis of historical data, daily monitoring and groundwater utilization.

Styles APA, Harvard, Vancouver, ISO, etc.

31

Liu, Jun Xian, Quan Zhi Zhou, Qiong Li Liu et Shao Peng Luo. « The Design and Implementation of the Teaching Platform of Communication Interface of a Comprehensive Communication System ». Applied Mechanics and Materials 738-739 (mars 2015) : 1221–24. http://dx.doi.org/10.4028/www.scientific.net/amm.738-739.1221.

Texte intégral

Résumé :

A certain type of communications system integrates various communication means and communication technology, covering more than 10 kinds of communication interfaces, which has a high demands for its maintenance and security personnel. By utilizing a variety of communication technology design and development of communication interface teaching platform detection of a comprehensive communication system, this paper solves the problems of no training facilities in the maintenance and support personnel training and non-intuitive and non-systematic testing training and so on.

Styles APA, Harvard, Vancouver, ISO, etc.

32

Wijaya, Agustinus Fritz, et Maylani Indah Rakhmawati. « Analysis and Design of Restaurant Information System using Unified Modeling Language ». SISFORMA 6, n^o 1 (18 septembre 2019) : 23. http://dx.doi.org/10.24167/sisforma.v6i1.2210.

Texte intégral

Résumé :

This research was done with the aim of facilitating the Admin access to process raw material inventory data which outlets and warehouses are located in different cities. The method used is the SDLC method, which is a method that uses several stages in system development ranging from System Planning, System Analyst, System Design, System Implementation, System Implementation, and System Maintenance. The result of this research is a system that can be accessed by admins to facilitate the work process.

Styles APA, Harvard, Vancouver, ISO, etc.

33

Sa'adillah, Maylawati, et Ramdhani Ali. « Logical framework of information technology : Systematization of software development research ». Telfor Journal 14, n^o 1 (2022) : 26–32. http://dx.doi.org/10.5937/telfor2201026s.

Texte intégral

Résumé :

This article aims to present a comprehensive Logical Framework for Information Technology (IT) Research, specifically for developing customized IT applications or software. The methodology of writing this article uses a content analysis with the main source of literature review, Focus Discussion Group, and also based on the experience and knowledge of the authors as lecturers of Software Engineering and Software Project Management. This article shows that although current IT development approaches or methodologies (especially software development methodology) continue to develop, good IT design is carried out through six main stages, namely planning, analysis, design, construction, implementation, and maintenance. The success of IT implementation depends on the good process of all stages of IT design. The involvement of all actors/ stakeholders in IT design is essential to be accommodated at all stages of IT design. Quality also becomes the main goal and controls every process of IT development.

Styles APA, Harvard, Vancouver, ISO, etc.

34

Cai, Hualong. « Design and Implementation of Operation and Maintenance of Information Systems for Yalong River Hydropower Development Company ». American Journal of Energy Engineering 3, n^o 1 (2015) : 1. http://dx.doi.org/10.11648/j.ajee.20150301.11.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

35

Jurkevičius, Martynas, Virgaudas Puodžiukas et Alfredas Laurinavičius. « Implementation of Road Performance Calculation Models Used in Strategic Planning Systems for Lithuania Conditions ». Baltic Journal of Road and Bridge Engineering 15, n^o 3 (14 août 2020) : 146–56. http://dx.doi.org/10.7250/bjrbe.2020-15.489.

Texte intégral

Résumé :

Deficiency or inadequate allocation of road maintenance and development funds leads to total road network degradation. In order to ensure proper condition of road pavement with a limited budget, we need road maintenance optimisation for the entire road network. The road maintenance optimisation can be achieved using knowledge-based strategic planning systems. The collection and analysis of necessary data help design different road maintenance long-term strategies. The output results help select priorities for road maintenance and proper fund allocation. Optimal road maintenance strategy is the way to keep a fairly good road network with available funds. In addition, the road user costs can be reduced. The aim of this paper is to offer a road maintenance management system for Lithuanian conditions. The model will help evaluate the performance of the current road network and prepare a multi-year priority list for road works.

Styles APA, Harvard, Vancouver, ISO, etc.

36

Yang, Li Fei, Hong Jiang et Fang Gu. « Exploratory Research of the Equipment Maintenance Strategy Analysis Method in Design Stage of Nuclear Power Plants ». Advanced Materials Research 1051 (octobre 2014) : 1068–73. http://dx.doi.org/10.4028/www.scientific.net/amr.1051.1068.

Texte intégral

Résumé :

The design quality of the nuclear power plants (NPPs) has a direct impact on the operation and maintenance, which involves the safety and reliability of NPPs. Planning and development of the maintenance requirements of system and equipment in initial design stage of NPPs, and determination of reliability maintenance strategy compilation methods enable to fulfill good connection between design and operation of important value. After investigation and analysis, with a combination of reliability analysis method, experience feedback and common analysis approach, the methodology of reliability maintenance strategy compilation in design stage of NPPs has been initially established. And such methodology not only meets the maintenance requirements of system and equipment in design stage, but also enables to check the rationality and operability of process design from the maintenance implementation level, at the same time, it has great value in application regarding improving operational reliability of NPPs and avoiding non-essential major modification during operation of NPPs.

Styles APA, Harvard, Vancouver, ISO, etc.

37

Li, Yu Ming. « The Design of Stadiums Operation and Maintenance Management System Based on the ASP.NET ». Applied Mechanics and Materials 687-691 (novembre 2014) : 2383–86. http://dx.doi.org/10.4028/www.scientific.net/amm.687-691.2383.

Texte intégral

Résumé :

In the era of rapid development of information technology, how to make the management effective, efficient, cost-effective and management informatization is an inevitable trend. In this paper, firstly introduce the overview of the Stadiums operation and maintenance management system based on the ASP.NET; secondly research the operation and management system of stadium; and finally based on the first and second analysis of the operation and maintenance management system, put forward the specific Design and implementation of the operation and management system of stadium.

Styles APA, Harvard, Vancouver, ISO, etc.

38

Zou, Pinghui, et Gaoqing Ji. « Design and Implementation of Node of Wireless Network Environment Monitoring System Based on Artificial Intelligence ». Wireless Communications and Mobile Computing 2022 (26 avril 2022) : 1–9. http://dx.doi.org/10.1155/2022/5911476.

Texte intégral

Résumé :

In order to effectively solve the problem of traditional environmental monitoring system due to high sensor cost, difficult deployment, and high maintenance cost, the node design and implementation of a wireless sensor network-based environmental monitoring system are proposed. Simulation experiments show that the time-consuming running time is 14.210361 s. After adding the action force of the grid point on the node, the running time is 11.257740 s, and the operation efficiency of the algorithm is significantly improved. The improved virtual force algorithm optimization improved node coverage by 5.2%.The system is easy to deploy, reduces the development and maintenance cost, and can obtain data or monitor through wireless communication. It is convenient to use and maintain.

Styles APA, Harvard, Vancouver, ISO, etc.

39

Xia, Pengcheng, Tianze Li, Tao Gao et Yuhan Wang. « Design and Implementation of Employment Management System Based on B / S ». International Journal of Advanced Pervasive and Ubiquitous Computing 8, n^o 4 (octobre 2016) : 75–104. http://dx.doi.org/10.4018/ijapuc.2016100103.

Texte intégral

Résumé :

As society progresses with computer technology, the rapid development of network technology, data, and information technology has become the development trend in today's society. How to improve college employment rate and improve their own competitiveness is a problem faced by many universities. At present, most graduates are accustomed to finding suitable employers through the Internet platform, a way to communicate with students in a timely and effective manner. This system provides a platform for the college to communicate with students, publish employment information of employers, and maintain employment information platform for students. Through student self-maintenance methods to save students and schools, employment units direct communication costs. The system uses Java, WEB and Ajax technology to school statistics, recruitment of employers, students work together to build B / S structure of the site. This website statistics college employment rate, the use of units, schools and students need information.

Styles APA, Harvard, Vancouver, ISO, etc.

40

Zhang, Di, Shao Hong Jing et Qi Long Ma. « Design and Implementation of Service-Oriented Information Acquisition System of Smart Meter ». Applied Mechanics and Materials 631-632 (septembre 2014) : 614–17. http://dx.doi.org/10.4028/www.scientific.net/amm.631-632.614.

Texte intégral

Résumé :

Currently, in terms of smart meter information acquisition system, there exists problems such as high cost of development, difficulty in system maintenance and poor integration ability. To solve the integration problems, a service-oriented smart meter information acquisition system is proposed in this paper with the usage of service oriented architecture. In the concrete implementation, problems of processing brought by multiple protocols are worked out by adopting the object-oriented method. Meanwhile, in order to deal with the blocking of client process during the smart meter reading procedure, WCF technology, as a solution, is put forward.

Styles APA, Harvard, Vancouver, ISO, etc.

41

Xia, Hong, Jin Min Song et Chang Jie Su. « Design and Implementation of Long Range UHF RFID Reader ». Applied Mechanics and Materials 241-244 (décembre 2012) : 3229–37. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.3229.

Texte intégral

Résumé :

Aiming at the problems how to realize long range, high speed identification and how to integrate web with the management system in the UHF RFID applications, a UHF RFID reader system based on S3C2440 microprocessor and AS3992 UHF Reader chip is designed and implemented in this paper. By designing the RF front-end power amplifier and signal isolation circuit, the transmit power detection circuit and the antenna impedance tunable matching circuit, the transmit power reaches up to 32 dBm and the receiver SNR is improved at the same time, resulting in the stable read range reaching up to 12 meters. In order to integrate web control into the RFID management system, the reader system is transplanted into the embedded Linux OS and a web management system that is based on web server and CGI is constructed. Device drivers are developed and RFID APIs are packaged, greatly facilitating the software development and maintenance. By using the Random-Slotted anti-collision algorithm, high speed identification of ISO18000-6C RFID tags has been achieved.

Styles APA, Harvard, Vancouver, ISO, etc.

42

Bartz, Teonas, Julio Cezar Mairesse Siluk et Ana Paula Barth Bartz. « Improvement of industrial performance with TPM implementation ». Journal of Quality in Maintenance Engineering 20, n^o 1 (4 mars 2014) : 2–19. http://dx.doi.org/10.1108/jqme-07-2012-0025.

Texte intégral

Résumé :

Purpose – The purpose of this paper is to show the implementation of a maintenance management model based on total productive maintenance (TPM) in a production line of a metallurgical company, with high-precision equipment requiring effective maintenance to maintain the quality of the production process. Design/methodology/approach – Has been proposed a model for conducting the activities, emphasizing the training activities of the teams involved in the implementation, collection and analysis of industrial performance indicators from a year before the implementation of TPM. The development followed the timetable of activities and the results of these performance indicators were collected again after the application of the model. Findings – It observed that after the implementation of TPM, and the results of these performance indicators were collected again after the application of the model. Thus, it is concluded that the TPM assists in improving industrial performance and competitiveness of the production line studied. Originality/value – The angle, from which the paper approaches the TPM problem, is original for the studied company and shows positives results. It allows the company to apply the model in their others production lines and factories to achieve an improvement in industrial performance and competitiveness.

Styles APA, Harvard, Vancouver, ISO, etc.

43

Chen, Shi Qang, et Bin Ying Wu. « Design and Application of Book Information Retrieval System Based on B/S ». Advanced Materials Research 798-799 (septembre 2013) : 630–33. http://dx.doi.org/10.4028/www.scientific.net/amr.798-799.630.

Texte intégral

Résumé :

B/S structure (Browser/Server) is one hide client mode after WEB development. This kind of network structure mode unifies WEB browser as the client-side in order to integrate the core part of system function realization to the server. B/S mode simplifies system development, maintenance, and usage. The client only needs one Browser under the B/S mode. The browser interact data with database through Web Server. This article introduces key techniques of B/S, designs and develops one book information retrieval system. The practical application shows the book information retrieval system based on B/S mode has the characteristics of easy maintenance, expansion and high availability. Through the system implementation, we can improve library utilization rate, and express the greater economic effectiveness and social benefit.

Styles APA, Harvard, Vancouver, ISO, etc.

44

Maloney, Krisellen, et Paul J. Bracke. « Beyond Information Architecture : A Systems Integration Approach to Web-site Design ». Information Technology and Libraries 23, n^o 4 (17 septembre 2017) : 145–52. http://dx.doi.org/10.6017/ital.v23i4.9656.

Texte intégral

Résumé :

Users' needs and expectations regarding access to information have fundamentally changed, creating a disconnect between how users expect to use a library Web site and how the site was designed. At the same time, library technical infrastructures include legacy systems that were not designedf or the Web environment. The authors propose a framework that combines elements of information architecture with approaches to incremental system design and implementation. The framework allows for the development of a Web site that is responsive to changing user needs, while recognizing the need for libraries to adopt a cost-effective approach to implementation and maintenance.

Styles APA, Harvard, Vancouver, ISO, etc.

45

Zhao, Ling Ling, Qiao Yun Sun et Xiao Xiao Liu. « The Design and Implementation of the Colleges Network Examination System Based on B/S Architecture ». Applied Mechanics and Materials 543-547 (mars 2014) : 4609–12. http://dx.doi.org/10.4028/www.scientific.net/amm.543-547.4609.

Texte intégral

Résumé :

With the development of computer information technology, the network examination system as a new way has received more and more attention in the universities. This system is a Web application based on B/S structure, follows the software engineering design method and realizes the user login, examination question management, database maintenance, examination paper generation of examination question database, online examination management, examination score management, and other functions.

Styles APA, Harvard, Vancouver, ISO, etc.

46

Wei, Fan, et Qian Zhang. « Design and Implementation of Online Shopping System Based on B/S Model ». MATEC Web of Conferences 246 (2018) : 03033. http://dx.doi.org/10.1051/matecconf/201824603033.

Texte intégral

Résumé :

B/S structure (Browser/Server) is one hidden client mode after WEB development. This kind of network structure mode unifies WEB browser as the client-side in order to integrate the core part of system function realization to the server. B/S model simplifies system development, maintenance, and usage. The client only needs one Browser under the B/S model, and the browser interact data with database through Web Server. Since the B/S model has such huge advantages, this online shopping system is based on this model. The system through the MVC(Model, View, and Controller) framework integrate network of online shopping system, completing the control layer management, processing data access. Finally, the system can meet online shopping requirements basically, and its also a good application of e-commerce. Customers can know the relevant information of products at any time, and they can have mass commodity information. Besides, the drawbacks of traditional shopping such as geographical and time limitations have been solved completely.

Styles APA, Harvard, Vancouver, ISO, etc.

47

Li, Ming Bin, Dong Wen Yin et Song Mu. « Design and Implementation on a Novel of Solar Double-Direction Tracking-Device ». Applied Mechanics and Materials 121-126 (octobre 2011) : 2630–35. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.2630.

Texte intégral

Résumé :

The development of solar energy tracking technology has important practical significance for promoting solar energy application. In the paper, double-direction tracking-device was designed based on the theory of calendar check tracking and worm gear mechanism, gear transmission mechanism, cam push-rod mechanism was used to achieve the function of “single driving, double-direction tracking” . So, the function of tracking solar azimuth and solar altitude angles was cleverly realized through controlling a single power. In the paper, design and manufacture of the device were completed by Solidworks software. Through the debugging experiment, the device’s advantages were proved of low energy consumption, high reliability, strong anti-interference ability, easy maintenance and suitable for a variety of small solar installations.

Styles APA, Harvard, Vancouver, ISO, etc.

48

Jordan, Lizeyka, David Russell, Dawon Baik, Frances Dooley et Ruth M. Masterson Creber. « The Development and Implementation of a Cardiac Home Hospice Program : Results of a RE-AIM Analysis ». American Journal of Hospice and Palliative Medicine® 37, n^o 11 (18 mai 2020) : 925–35. http://dx.doi.org/10.1177/1049909120925432.

Texte intégral

Résumé :

Background: Use of hospice has grown among patients with heart failure; however, gaps remain in the ability of agencies to tailor services to meet their needs. Aim: This study describes the implementation of a cardiac home hospice program and insights for dissemination to other hospice programs. Design: We conducted a multimethod analysis structured around the Reach Effectiveness Adoption Implementation and Maintenance (RE-AIM) framework. Settings/Participants: We used electronic medical records for our quantitative data source and interviews with hospice clinicians from a not-for-profit hospice agency (N = 32) for our qualitative data source. Results: Reach—A total of 1273 participants were enrolled in the cardiac home hospice program, of which 57% were female and 42% were black or Hispanic with a mean age was 86 years. Effectiveness—The cardiac home hospice program increased hospice enrollment among patients with heart failure from 7.9% to 9.5% over 1 year (2016-2017). Adoption—Institutional factors that supported the program included the acute need to support medically complex patients at the end of life and an engaged clinical champion. Implementation—Program implementation was supported by interdisciplinary teams who engaged in care coordination. Maintenance—The program has been maintained for over 3 years. Conclusion: The cardiac home hospice program strengthened hospice clinicians’ ability to confidently provide care for patients with heart failure, expanded awareness of their symptoms among clinicians, and was associated with increased enrollment of patients with heart failure over the study period. This RE-AIM evaluation provides lessons learned and strategies for future adoption, implementation, and maintenance of a cardiac home hospice program.

Styles APA, Harvard, Vancouver, ISO, etc.

49

Sutejo, Sutejo, Angger Purno Nugroho, Mei Sartika et Irshal Wahyu Pratama. « MEDICAL RECORD APPLICATION WITH MOBILE WEB-BASED BARCODE SYSTEM ». Jurnal TAM (Technology Acceptance Model) 12, n^o 2 (15 novembre 2021) : 135. http://dx.doi.org/10.56327/jurnaltam.v12i2.1073.

Texte intégral

Résumé :

Medical record is a file containing notes and documents regarding patient identity, examination, treatment, actions, and other services to patients at health care facilities. According to the Regulation of the Minister of Health of the Republic of Indonesia in 2008 in Article 1, medical records are files containing notes and documents regarding patient identity, examination, treatment, actions, and other services which have been provided to patients. In the development of the medical record system, the waterfall method is used which is a method which takes a systematic approach from the level of system requirements to the analysis, design, coding, testing, and maintenance stages. Many methods are used in system development such as the prototyping method, waterfall, and others. In this study, only the waterfall development method is used because each stage will be carried out sequentially from System Design, System Analysis, Coding, System Implementation, and System Maintenance. Based on the results of the study of research progress, analysis, design, and implementation of the design of a mobile web-based barcode medical record system at Bhakti Keluarga Husada Clinic, it can be concluded that the system design was carried out using the PHP programming language, MySQL database processing, and the application of a web mobile-based barcode medical record system at Bhakti Keluarga Husada Clinic.

Styles APA, Harvard, Vancouver, ISO, etc.

50

Meheden, Maria, Andrei Musat, Andrei Traciu, Andrei Viziteu, Adrian Onu, Constantin Filote et Maria Simona Răboacă. « Design Patterns and Electric Vehicle Charging Software ». Applied Sciences 11, n^o 1 (25 décembre 2020) : 140. http://dx.doi.org/10.3390/app11010140.

Texte intégral

Résumé :

The development and maintenance of complex software systems, with ever-changing requirements has benefited from the implementation of design patterns, which ensure a higher degree of maintainability. The present article illustrates the essential role of design patterns in sketching the software architecture for an electric vehicle charging management platform. We have integrated a series of design patterns to create a solid base structure for the API (Application Programming Interface). Furthermore, we have explored cloud design patterns in the deployment process to ensure a proper multi-tenant cloud application with the best possible tenant isolation for the cost. The aim of this paper is to offer readers an introduction in the case study theme, to describe a complex platform development through design patterns. With proper examples from real projects debated in the industry. The paper demonstrates the design patterns applicability from software level to cloud resources plan and advocates for a high-quality solution in every segment of project development. In conclusion, the results are promising, and the functionality of the established methods on this type of platforms will be evaluated during the implementation period. Overall, design patterns have proven to be essential in the development process, ensuring effective team communication and the delivery of qualitative software solutions.

Styles APA, Harvard, Vancouver, ISO, etc.

Articles de revues sur le sujet « IK. Design, development, implementation and maintenance »

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres