Littérature scientifique sur le sujet « Identification de sources de chaleur »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Identification de sources de chaleur ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Identification de sources de chaleur"
CORDOVA LLANOS, V., H. X. HUMBEL, J. BOISSON, R. PHILIPPE et M. POMIES. « Identification des projets potentiels de valorisation de l’énergie thermique des eaux usées de l’Eurométropole de Strasbourg ». Techniques Sciences Méthodes 11 (21 novembre 2022) : 63–70. http://dx.doi.org/10.36904/tsm/202211063.
Texte intégralAsserin, O., D. Ayrault, P. Gilles, S. Morville, E. Guyot et J. Schroeder. « Contribution numérique pour l’optimisation d’un mode opératoire de soudage – Identification d’une source de chaleur équivalente ». Matériaux & ; Techniques 102, no 4 (2014) : 409. http://dx.doi.org/10.1051/mattech/2014038.
Texte intégralNessab, Walid, Brahim Fersadou et Henda Kahalerras. « Etude d’un jet de ferrofluide confiné en présence de deux sources magnétiques ». MATEC Web of Conferences 261 (2019) : 04002. http://dx.doi.org/10.1051/matecconf/201926104002.
Texte intégralBrahim, Fersadou, Walid Nessab et Henda Kahalerras. « Convection mixte MHD d’un nanofluide (eau-Cu) dans une cavité ouverte ». MATEC Web of Conferences 261 (2019) : 04001. http://dx.doi.org/10.1051/matecconf/201926104001.
Texte intégralHocine, Ali, Nacim Alilat et Jean-Gabriel Bauzin. « Comportement thermique d'un disque tournant soumis à des sources de chaleur surfaciques discrètes ». Comptes Rendus Mécanique 337, no 8 (août 2009) : 616–20. http://dx.doi.org/10.1016/j.crme.2009.06.031.
Texte intégralJaeger, Marc, Georges Berardi et Ahmed Kaiss. « Identification du terme de production de chaleur dans des élastomères sollicités en cisaillement ». International Journal of Thermal Sciences 38, no 2 (février 1999) : 132–41. http://dx.doi.org/10.1016/s1290-0729(99)80050-7.
Texte intégralUthe, J. F., et C. L. Chou. « Cadmium in Sea Scallop (Placopecten magellanicus) Tissues from Clean and Contaminated Areas ». Canadian Journal of Fisheries and Aquatic Sciences 44, no 1 (1 janvier 1987) : 91–98. http://dx.doi.org/10.1139/f87-011.
Texte intégralAhlswede, R., B. Balkenhol et C. Kleinewächter. « Identification for Sources ». Electronic Notes in Discrete Mathematics 21 (août 2005) : 115–18. http://dx.doi.org/10.1016/j.endm.2005.07.006.
Texte intégralBadinier, Thibault, Iheb Ghandri, Théophile Grappe, Badr Ouzzine et Jean de Sauvage. « Géostructures thermiques : verrous scientifiques et moyens d’étude ». Revue Française de Géotechnique, no 172 (2022) : 1. http://dx.doi.org/10.1051/geotech/2022007.
Texte intégralPezerat, C., et J. L. Guyader. « Identification of vibration sources ». Applied Acoustics 61, no 3 (novembre 2000) : 309–24. http://dx.doi.org/10.1016/s0003-682x(00)00036-0.
Texte intégralThèses sur le sujet "Identification de sources de chaleur"
Dupuis, Quentin. « Identification des caractéristiques d'une carte électronique et de ses composants, et modélisation de leurs comportements thermiques ». Electronic Thesis or Diss., Paris 10, 2023. http://www.theses.fr/2023PA100131.
Texte intégralThe work presented in this thesis is a contribution to the identification via experimental measurements of critical parameters for the thermal modelling of an electronic board and its components.First, the study of the temporal evolution of the junction temperature of an electronic component stimulated by a constant thermal power is proposed, based on the graphical analysis of its Cumulative Structure Function. All the steps involved in the construction of this function are presented in detail, together with an analysis of the various sensitive parameters. Absolute identification of the thermal parameters of the different materials of an electronic component is not feasible, but a relative study is presented to enable the calibration of its detailed numerical model.The second part of this thesis is devoted to the identification, using inverse methods, of the characteristics of a component embedded in an electronic board, namely its position, its dimensions, and its dissipated thermal power. To achieve this objective, a 3D numerical model based on the finite volume method was implemented to calculate the transient conductive heat transfer within the structure of study. The conjugate gradient algorithm with adjoint variable calculation is used to estimate the dissipated heat power density, while its coupling with a one-dimensional minimisation function permits to identify the position of the heat sources according to the depth of the structure. The application of this procedure to data from numerical simulations and experimental measurements has enabled to validate the inversion method
Touhami, Younès. « Identification spatio-temporelle d'une source de chaleur dans un milieu diffusif par résolution d'un problème inverse ». Aix-Marseille 1, 1996. http://www.theses.fr/1996AIX11059.
Texte intégralBouzarour, Amina. « Auto-échauffement d'un lit ventilé de matériaux carbonés : cas du bois torréfié Experimental study of torrefied wood fixed bed : Thermal analysis and source term identification ». Thesis, Ecole nationale des Mines d'Albi-Carmaux, 2019. http://www.theses.fr/2019EMAC0012.
Texte intégralTorrefaction is one of the thermo-chemical pretreatment processes of lignocellulosic biomass that facilitates both the storage and transport of the material and increases the energy value of the product. However, as the torrefied substrate is more reactive, it is more prone to spontaneous exothermic mechanisms that can lead to self-heating of the material. This issue is not well investigated in the case of torrefied wood since its industrial application is mainly in the test phase. For this reason, this topic is further studied throughout this thesis. Indeed, the aim was to understand the phenomena responsible for the self-heating of a bed of biomass ventilated with oxidizing gas at low temperature. To do this, self-heating scenarios of torrefied wood chips were created under an oxidizing atmosphere. Pilot-scale experiments were conducted in a 12 L fixed-bed reactor. During these tests, we demonstrated that self-heating is intensified when the oxidizing gas flow rate is low and under a high oxygen fraction. In addition, the heat produced during the self-heating of the wooden bed was estimated on the basis of a heat balance and thermal data. Then, the source term was correlated to the oxygen fraction and temperature in a simplified model. The apparent kinetic parameters and heat of reaction associated with self-heating were derived from this. On the other hand, in order to understand the exothermic phenomena characterizing self-heating, low temperature oxidation tests are carried out on a small scale (ATG/ATD). On the basis of these analyses, kinetic models were developed to distinguish and quantify the mechanisms identified experimentally. These two approaches have made it possible to highlight three main mechanisms involved in low-temperature oxidation: chemical adsorption of oxygen on the reagent, decomposition of the oxygen complexes formed during adsorption and a direct oxidation reaction. In a more problem-oriented approach to industrial-scale self-heating, a numerical model coupling chemical kinetics and mass and heat transfers was designed at the scale of the particle bed. This model provided a reasonable prediction of the thermal performance of the torrefied wood bed under high ventilation flow. It was then extrapolated to an industrial scale to simulate the thermal behaviour of a storage silo undergoing self-heating
Eynard, Julien. « Gestion optimale de l'énergie dans un procédé multi-source pour le chauffage de bâtiments ». Phd thesis, Université de Perpignan, 2010. http://tel.archives-ouvertes.fr/tel-00536864.
Texte intégralChiche, Samuel. « Intégration de sources urbaines de chaleur fatale au sein d'un réseau de chaleur ». Thesis, Paris Est, 2020. http://www.theses.fr/2020PESC2007.
Texte intégralDistrict heating systems are considered as key tools to contribute to the energy transition in urban areas through their ability to promote waste and renewable energies. Waste heat sources (also named excess heat) are still under-exploited in district heating systems although there is significant potential, especially in urban areas. Waste heat sources located near or in dense urban areas (wastewater, datacenters, laundries, etc.) are the research topic of this thesis. Methods have been developed to precisely evaluate their energy potential, knowing that all these sources have different technical characteristics (temperature and variability in particular). These methods have been integrated into a simulation tool, named Recov’Heat. It calculates technical, economic and environmental indicators to assess the relevance of an urban heat source. The Recov'Heat model has been tested on various case studies and obtains results close to reality despite a tendency to overestimate the energy recovered. Technical simplifications in the model and the calculation of the maximum energy potential justify these differences. The viability of integrating a waste heat source in a district heating system depends not only on technical and economic parameters, but also on several conditions linked to the local context, which may affect the implementation of such projects. Several case studies show the influence of local authorities’ support on the success of these projects. They have a decisive role to play in stimulating consultation between a multitude of actors involved in these projects and to understand the contractual complexities between them
Binet, Bruno. « Étude de la fusion dans des enceintes munies de sources de chaleur discrètes ». Sherbrooke : Université de Sherbrooke, 1999.
Trouver le texte intégralCabell, Randolph H. « The automatic identification of aerospace acoustic sources ». Thesis, Virginia Tech, 1989. http://hdl.handle.net/10919/45932.
Texte intégralThis work describes the design of an intelligent recognition system used to distinguish noise signatures of five different acoustic sources. The system uses pattern recognition techniques to identify the information obtained from a single microphone. A training phase is used in which the system learns to distinguish the sources and automatically selects features for optimal performance. Results were obtained by training the system to distinguish jet planes, propeller planes, a helicopter, train, and wind turbine from one another, then presenting similar sources to the system and recording the number of errors. These results indicate the system can successfully identify the trained sources based on acoustic information. Classification errors highlight the impact of the training sources on the system's ability to recognize different sources.
Master of Science
Lefèvre, Frédéric. « Résolution de problèmes inverses : estimation de sources de chaleur non uniformément réparties ». Aix-Marseille 1, 2001. http://www.theses.fr/2001AIX11063.
Texte intégralBinet, Bruno. « Étude de la fusion dans des enceintes munies de sources de chaleur discrètes ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0034/NQ67581.pdf.
Texte intégralBinet, Bruno. « Étude de la fusion dans des enceintes munies de sources de chaleur discrètes ». Thèse, Université de Sherbrooke, 1998. http://savoirs.usherbrooke.ca/handle/11143/1714.
Texte intégralLivres sur le sujet "Identification de sources de chaleur"
Harris, S. Dyer. Heat transfer to the environment from buried tunnels containing heat sources. [New York] : Knovel, 2011.
Trouver le texte intégralG, Read Peter, dir. Gems : Their sources, descriptions, and identification. 6e éd. Amsterdam : Elsevier, 2006.
Trouver le texte intégralWebster, Robert. Gems : Their sources, descriptions, and identification. 5e éd. Oxford : Butterworth-Heinemann, 1994.
Trouver le texte intégralAgency, International Atomic Energy, dir. Identification of radioactive sources and devices : Reference manual. Vienna : International Atomic Energy Agency, 2007.
Trouver le texte intégralLexicréole : (identification des sources lexicales) = [Leksikreyoòl : (rive'jwenn sous leksikal yo)]. Fribourg, Suisse : Edikreyòl, 2001.
Trouver le texte intégralArnold, Forest D. Analysis of pollutant discharges from West Coast point sources. Rockville, Md : National Oceanic and Atmospheric Administration, Strategic Assessment Branch, 1988.
Trouver le texte intégralRichter, Bernd C. Identification of sources of ground-water salinization using geochemical techniques : Project summary. Ada, OK : U.S. Environmental Protection Agency, Robert S. Kerr Environmental Research Laboratory, 1992.
Trouver le texte intégralHow to identify birds. New York : McGraw-Hill, 1988.
Trouver le texte intégralBarbara, DeFelice, ALA/ACRL STS Task Force on Proceedings. Committee on Bibliographic Access. et Association of College and Research Libraries., dir. Science and engineering conference proceedings : A guide to sources for identification and verification. Chicago, IL : Association of College and Research Libraries, 1995.
Trouver le texte intégralDavenport, Patricia. School related stress : The measurment of early adolescent perceptions and the identification of sources. London : UEL, 1995.
Trouver le texte intégralChapitres de livres sur le sujet "Identification de sources de chaleur"
Ahlswede, R., B. Balkenhol et C. Kleinewächter. « Identification for Sources ». Dans Lecture Notes in Computer Science, 51–61. Berlin, Heidelberg : Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11889342_4.
Texte intégralAhlswede, Rudolf. « Identification for Sources ». Dans Identification and Other Probabilistic Models, 361–73. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65072-8_19.
Texte intégralAhlswede, Rudolf. « L-Identification for Sources ». Dans Identification and Other Probabilistic Models, 429–511. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65072-8_22.
Texte intégralSaharan, Govind Singh, Naresh K. Mehta et Prabhu Dayal Meena. « Identification of R-Genes Sources ». Dans Genomics of Crucifer’s Host-Resistance, 65–193. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0862-9_2.
Texte intégralHrivnak, Bruce J., Sun Kwok et R. T. Boreiko. « Identification of Cool Iras Sources ». Dans Late Stages of Stellar Evolution, 49–50. Dordrecht : Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3813-7_5.
Texte intégralJiang, Jiaojiao, Sheng Wen, Shui Yu, Bo Liu, Yang Xiang et Wanlei Zhou. « Identifying Multiple Propagation Sources ». Dans Malicious Attack Propagation and Source Identification, 139–57. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-02179-5_11.
Texte intégralSanders, David B., Sylvain Veilleux, Min Yun, Lennox L. Cowie, Kimiaki Kawara, Yoshiaki Taniguchi, Shinki Oyabu, Takashi Murayama et Haruyuki Okuda. « Identification of ISOPHOT Deep Field Sources ». Dans Starburst Galaxies : Near and Far, 297–302. Berlin, Heidelberg : Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-56538-0_42.
Texte intégralHawkins, M. R. S. « The Optical Identification of Denis Sources ». Dans Astrophysics and Space Science Library, 197–99. Dordrecht : Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5784-1_38.
Texte intégralCanova, A., M. Repetto et M. Tartaglia. « Identification of Industrial Electromagnetic Field Sources ». Dans Optimization and Inverse Problems in Electromagnetism, 193–203. Dordrecht : Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-2494-4_19.
Texte intégralAlawamleh, Mohammad, et Keith Popplewell. « Risk Sources Identification in Virtual Organisation ». Dans Enterprise Interoperability IV, 265–77. London : Springer London, 2010. http://dx.doi.org/10.1007/978-1-84996-257-5_25.
Texte intégralActes de conférences sur le sujet "Identification de sources de chaleur"
Pineau, François-Xavier, Sébastien Derriere, Laurent Michel, Christian Motch et Coryn A. L. Bailer-Jones. « Statistical identification of 2XMMi sources ». Dans CLASSIFICATION AND DISCOVERY IN LARGE ASTRONOMICAL SURVEYS : Proceedings of the International Conference : “Classification and Discovery in Large Astronomical Surveys”. AIP, 2008. http://dx.doi.org/10.1063/1.3059033.
Texte intégralRaveendra, S. T., et S. Sureshkumar. « Identification of Incoherent Noise Sources ». Dans ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/nca-23512.
Texte intégralHao, L., P. L. Lewin et S. G. Swingler. « Identification of multiple partial discharge sources ». Dans 2008 International Conference on Condition Monitoring and Diagnosis. IEEE, 2008. http://dx.doi.org/10.1109/cmd.2008.4580244.
Texte intégralWei, Yun, et Tengfei Zhang. « Inverse Identification of Multiple Pollutant Sources ». Dans 2015 Building Simulation Conference. IBPSA, 2015. http://dx.doi.org/10.26868/25222708.2015.3116.
Texte intégralBanshwar, A., et A. K. Chandel. « Identification of harmonic sources using fuzzy logic ». Dans 2010 Power India. IEEE, 2010. http://dx.doi.org/10.1109/pedes.2010.5712435.
Texte intégralNaik, Ganesh R., Dinesh K. Kumar et Hans Weghorn. « ICA based identification of sources in sEMG ». Dans 2007 3rd International Conference on Intelligent Sensors, Sensor Networks and Information. IEEE, 2007. http://dx.doi.org/10.1109/issnip.2007.4496914.
Texte intégralAgrafioti, Foteini, et Dimitrios Hatzinakos. « Fusion of ECG sources for human identification ». Dans 2008 3rd International Symposium on Communications, Control and Signal Processing (ISCCSP). IEEE, 2008. http://dx.doi.org/10.1109/isccsp.2008.4537472.
Texte intégralHongxian Ye, Shixi Yang, Jiangxin Yang et Huawei Ji. « Vibration Sources Identification with Independent Component Analysis ». Dans 2006 6th World Congress on Intelligent Control and Automation. IEEE, 2006. http://dx.doi.org/10.1109/wcica.2006.1714191.
Texte intégralNguyen, Hung T., Preetam Ghosh, Michael L. Mayo et Thang N. Dinh. « Multiple Infection Sources Identification with Provable Guarantees ». Dans CIKM'16 : ACM Conference on Information and Knowledge Management. New York, NY, USA : ACM, 2016. http://dx.doi.org/10.1145/2983323.2983817.
Texte intégralMartin, Vincent, et Frederic Cohen-Tenoudji. « Identification of acoustic sources with uncertain data ». Dans ICA 2013 Montreal. ASA, 2013. http://dx.doi.org/10.1121/1.4799017.
Texte intégralRapports d'organisations sur le sujet "Identification de sources de chaleur"
DEFENSE INTELLIGENCE AGENCY WASHINGTON DC. Identification of Radiation Sources in a Peacetime Environment. Fort Belvoir, VA : Defense Technical Information Center, avril 1998. http://dx.doi.org/10.21236/ada344473.
Texte intégralPerkey, David, Mark Chappell, Jennifer Seiter et Heidi Wadman. Identification of sediment sources to Calumet River through geochemical fingerprinting. Engineer Research and Development Center (U.S.), mai 2017. http://dx.doi.org/10.21079/11681/22191.
Texte intégralAndersson, Göran, et Daniel Meierhans. Synthèse thématique «Réseaux d’énergie» du PNR «Energie». Swiss National Science Foundation (SNSF), décembre 2019. http://dx.doi.org/10.46446/publication_pnr70_pnr71.2019.2.fr.
Texte intégralSleaford, B. Neutron Capture gamma ENDF libraries for modeling and identification of neutron sources. Office of Scientific and Technical Information (OSTI), octobre 2007. http://dx.doi.org/10.2172/923093.
Texte intégralSmith, S. A., et D. R. Johnson. Identification and evaluation of data sources for the commercial buildings retrofit market. Office of Scientific and Technical Information (OSTI), octobre 1986. http://dx.doi.org/10.2172/5197475.
Texte intégralThees, Oliver, Matthias Erni, Vanessa Burg, Gillianne Bowman, Serge Biollaz, Theodoros Damartzis, Timothy Griffin et al. Le bois-énergie en Suisse : potentiel énergétique, développement technologique, mobilisation des ressources et rôle dans la transition énergétique. Livre blanc. Swiss Federal Institute for Forest, Snow and Landscape Research, WSL, avril 2023. http://dx.doi.org/10.55419/wsl:32793.
Texte intégralThompson et Anderson. GRl-90-0337 Identification of Injected Storage Gas. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), décembre 1990. http://dx.doi.org/10.55274/r0011193.
Texte intégralMays, Gary T., Randy Belles, Brandon R. Blevins, Stanton W. Hadley, Thomas J. Harrison, Warren C. Jochem, Bradley S. Neish, Olufemi A. Omitaomu et Amy N. Rose. Application of Spatial Data Modeling and Geographical Information Systems (GIS) for Identification of Potential Siting Options for Various Electrical Generation Sources. Office of Scientific and Technical Information (OSTI), mai 2012. http://dx.doi.org/10.2172/1032036.
Texte intégralKelly, Elish, et Bertrand Maître. Identification Of Skills Gaps Among Persons With Disabilities And Their Employment Prospects. ESRI, septembre 2021. http://dx.doi.org/10.26504/sustat107.
Texte intégralKelly, Elish, et Bertrand Maître. Identification Of Skills Gaps Among Persons With Disabilities And Their Employment Prospects. ESRI, septembre 2021. http://dx.doi.org/10.26504/sustat107.
Texte intégral