Littérature scientifique sur le sujet « Hygroscopic stre »

AbstractMotivated by findings of new mineral related water sources for organisms under extremely dry conditions on Earth we studied in an interdisciplinary approach the water sorption behaviour of halite, soil component and terrestrialNostoc communebiofilm under Mars relevant environmental conditions. Physicochemical methods served for the determination of water sorption equilibrium data and survival of heterotrophic bacteria in biofilm samples with different water contents was assured by recultivation. Deliquescence of halite provides liquid water at temperatures <273 K and may serve as water source on Mars during the morning stabilized by the CO2atmosphere for a few hours. The protecting biofilm ofN. communeis rather hygroscopic and tends to store water at lower humidity values. Survival tests showed that a large proportion of the Alphaproteobacteria dominated microbiota associated toN. communeis very desiccation tolerant and water uptake from saturated NaCl solutions (either by direct uptake of brine or adsorption of humidity) did not enhance recultivability in long-time desiccated samples. Still, a minor part can grow under highly saline conditions. However, the salinity level, although unfavourable for the host organism, might be for parts of the heterotrophic microbiota no serious hindrance for growing in salty Mars-like environments.

Studying, controlling and extrapolating the indoor microclimate of historical buildings have always been at the forefront among numerous preventive conservation strategies, especially in case of buildings made of organic hygroscopic materials, e.g., wood. The variations and fluctuations of the microclimatic variables, namely temperature (T) and relative humidity (RH), could have a detrimental effect on the mechanical properties of wooden objects, works of art and structures. For this reason, through the years, several guidelines have been provided by standards and protocols about the optimal microclimatic conditions that should be ensured to avoid the decay and the eventual catastrophic failure of heritage objects and buildings. In this work, two historical buildings entirely made of Scots pine wood have been analysed: the Ringebu and Heddal stave churches (Norway). These churches store several wooden medieval statues and paintings that are also susceptible to the effects of the microclimate. For this reason, the timeseries of the indoor relative humidity of the two churches have been analysed, in the framework of the indications provided by the standards. The criticalities of the existing protocols have been pointed out, emphasizing the need for systematically and periodically updated specifications, tailorable to a given case study of concern, without forgetting the ever-present needs of energy- and money-saving approaches.

ABSTRACT Safflower is a crop of high economic value with high oil concentration in its seeds and great industrial versatility, besides various benefits to human health. As with other agricultural crops, it is common to store safflower to make it available in different periods of the year and, due to its hygroscopic characteristics, studies evaluating the effect of temperature and air relative humidity on its moisture content become relevant. Thus, the objective of the present study was to determine the water adsorption isotherms of safflower seeds and analyze their thermodynamic properties. Moisture contents of 6.5, 6.9, 7.3, 7.7, 8.3 and 9.1% (dry basis) were obtained by adsorption under controlled conditions of temperature (30 °C) and relative air humidity (90%). The adsorption isotherms were obtained by the indirect static method at different temperatures (10, 20, 30 and 40 °C). As temperature increased, for the same moisture content, there was an increase in water activity and, for constant water activity, the values of equilibrium moisture content decreased with increasing temperature. Chung-Pfost model showed the best fit to describe the phenomenon of hygroscopicity of safflower seeds. The thermodynamic properties were influenced by the moisture content of the seeds, reducing the energy necessary for water absorption in the product with the increase in adsorption, and the enthalpy-entropy theory was controlled by enthalpy.

Agroforestry industries, such as sugar-alcohol, food, and logging, produce large quantities of waste, used to generate energy from direct burning. The application of other processes, such as torrefaction and briquetting, can increase the profits from the use of agro-industrial waste for energy generation. Briquetting is an alternative for using these wastes, allowing the compaction of the biomass, generating a biofuel with high energy density, and which is more homogeneous and easier to store and transport. The objective of this study was to evaluate the physical and chemical properties of four biomass types (wastes from sawed eucalypt and pine wood, coffee pruning wastes, and sugarcane bagasse) torrefied at 300 °C and compacted (briquetting) at pressures of 6.21, 8.27, and 10.34 MPa. The torrefaction increased the fixed carbon content, ash, and calorific value, and reduced the volatile material content and hygroscopic equilibrium moisture of the biomasses. The volatile material content was lower and the fixed carbon higher in the coffee pruning waste, the ash content higher in the sugarcane bagasse, and the calorific value higher in the pine and eucalypt wood. The briquetting and the torrefaction processes increased the biomass bulk density, and the useful calorific value, respectively, and consequently the energy density of the briquettes produced with torrefied raw material under high pressure. The mechanical properties of the briquettes produced with all materials increased with the compaction pressure. Torrefaction and briquetting increased the energy potential of the biomasses evaluated to produce energy from clean technology.

PCMs (phase change materials) are ideal for thermal management solutions in buildings. This is because they release and store thermal energy during melting and freezing. When this material freezes, it releases a lot of energy in the form of latent heat of fusion or crystallization energy. Conversely, when the material melts, it absorbs the same amount of energy from its surroundings as it changes from a solid to a liquid state. In this study, Oriental spruce (Picea orientalis L.) sapwood was impregnated with three different commercial PCMs. The biological properties and the hygroscopic and thermal performance of the PCM-impregnated wood were studied. The morphology of PCM-impregnated wood was characterized through the use of scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). PCM-impregnated wood demonstrated low performance in terms of storing and releasing heat during phase change processes, as confirmed by DSC. The results show that PCMs possess excellent thermal stability at working temperatures, and the most satisfying sample is PCM1W, with a phase change enthalpy of 40.34 J/g and a phase change temperature of 21.49 °C. This study revealed that PCMs are resistant to wood-destroying fungi. After the 96 h water absorption test, the water absorption of the wood samples decreased by 28%, and the tangential swelling decreased by 75%. In addition, it has been proven on a laboratory scale that the PCM material used is highly resistant to biological attacks. However, large-scale pilot studies are still needed.

Abstract Background One-dose packaging is frequently used in Japan for elderly patients who are prescribed several medications. It is useful for easy administration and the prevention of misuse or missed medications. Hygroscopic medications are not suitable for one-dose packaging because moisture absorption may alter their properties. Plastic bags with desiccating agents are sometimes used to store hygroscopic medicines in one-dose packaging. However, the relationship between the quantity of desiccating agents and their safety in the storage of hygroscopic medications is poorly understood. Furthermore, older adults might accidentally consume desiccating agents used in food preservation. In this study, we developed a bag that suppresses the moisture absorption of hygroscopic medications without the use of desiccating agents. Methods The bag was manufactured using polyethylene terephthalate, polyethylene, and aluminum film on the outside, and unified with a desiccating film on the inside. Results The relative humidity (RH) in the bag was maintained at approximately 30–40% when the bag was stored at 75% RH and 35 °C. The manufactured bag’s moisture suppressing effect was better than that of plastic bags with desiccating agents when the hygroscopic medications, potassium aspartate and sodium valproate tablets, were stored at 75% RH and 35 °C for 4 weeks. Conclusions The moisture-suppression bag effectively stored and preserved hygroscopic medications and was more effective in inhibiting moisture absorption than plastic bags with desiccating agents under high temperature and humidity conditions. The moisture-suppression bags are expected to be useful for elderly patients who are prescribed several medications in one-dose packaging.