Littérature scientifique sur le sujet « Hydrolics »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Hydrolics ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Hydrolics"
Sohilait, Hanoch J., Hardjono Sastrohamidjojo, Sabirin Matsjeh et J. Stuart Grossert. « SYNTHESIS OF ANALOG L--METIL-DOPA FROM EUGENOL ». Indonesian Journal of Chemistry 5, no 3 (15 juin 2010) : 198–202. http://dx.doi.org/10.22146/ijc.21788.
Texte intégralSoraya, Soraya, Sahri Yanti et Mikhratunnisa Mikhratunnisa. « PENGARUH SIRUP GULA CAIR HASIL HIDROLISIS ENZIMATIS DARI SAGU (Metroxylon sp.) SEBAGAI MEDIA FERMENTASI TERHADAP KADAR SEFALOSPORIN C ». Pro Food 5, no 1 (22 mai 2019) : 430. http://dx.doi.org/10.29303/profood.v5i1.90.
Texte intégralLindu, Muhamad. « THE EFFECTS OF GRADIENT VELOCITY AND DETENTION TIME TO COAGULATION – FLOCCULATION OF DYES AND ORGANIC COMPOUND IN DEEP WELL WATER ». Indonesian Journal of Chemistry 8, no 2 (17 juin 2010) : 146–50. http://dx.doi.org/10.22146/ijc.21616.
Texte intégralRaynauld, Jean-Pierre. « Thermal stability of hydrolic drives ». Journal of Neuroscience Methods 18, no 4 (décembre 1986) : 385–87. http://dx.doi.org/10.1016/0165-0270(86)90026-9.
Texte intégralZhang, Wei. « Parameter Adjustment Strategy and Experimental Development of Hydraulic System for Wave Energy Power Generation ». Symmetry 12, no 5 (2 mai 2020) : 711. http://dx.doi.org/10.3390/sym12050711.
Texte intégralZamhari, Muhammad, Pandu Ridzaniyanto et Tawatchai Kangkamano. « Interactive Android Module Development Containing Three Chemical Representation Levels on Material of Salt Hydrolysis ». Indonesian Journal on Learning and Advanced Education (IJOLAE) 4, no 1 (24 décembre 2021) : 45–56. http://dx.doi.org/10.23917/ijolae.v4i1.12590.
Texte intégralBrovko, A., et G. Brovko. « Hydrolic groundwater regimes on Rivne NPP impact ». Visnyk of Taras Shevchenko National University of Kyiv. Geology, no 1 (68) (2015) : 70–75. http://dx.doi.org/10.17721/1728-2713.68.12.70-75.
Texte intégralMeladiyani, Ervini, Bayu Permana, Marsudi Marsudi et Ahmad Zayadi. « Perancangan Alat Pengangkat Sistem Hidrolik Tipe H Pada Tempat Pencucian Mobil Dengan Kapasitas Maximum 2.5 Ton ». Jurnal Ilmiah Giga 21, no 1 (9 avril 2019) : 33. http://dx.doi.org/10.47313/jig.v21i1.582.
Texte intégralCucu, Dumitrela, Violeta Mangalagiu, Dorina Amariucai-Mantu, Vasilichia Antoci et Ionel I. Mangalagiu. « Imidazolium ylides : cycloaddition versus hydrolisis ». Studia Universitatis Babeș-Bolyai Chemia 64, no 3 (30 septembre 2019) : 59–66. http://dx.doi.org/10.24193/subbchem.2019.3.05.
Texte intégralNguyen Van, Loi. « Determination of some suitable technology conditions to improve recovery performance of Morinda citrifolia L. juice ». Journal of Science Natural Science 67, no 1 (mars 2022) : 54–62. http://dx.doi.org/10.18173/2354-1059.2022-0006.
Texte intégralThèses sur le sujet "Hydrolics"
De, Carvalho Duarte Leandro. « Conception et optimisation d'un système hydrolien à aile oscillante passive ». Thesis, Strasbourg, 2019. http://www.theses.fr/2019STRAD038.
Texte intégralGiven the current energy transition conjuncture, where the electricity production and the electricity grid are challenged, the hydraulic potential of low current sites is relevant and remains under-exploited. In such context, this thesis studies a novel concept of an energy harvester device: the fully passive flapping foil turbine. Bioinspired from aquatic animals swimming technique, this hydrokinetic energy harvester consists of an oscillating foil describing periodic heaving and pitching motions, entirely induced by fluid-structure interactions. The first part of this thesis deals with the development of a numerical model for accurately simulating the harvester behavior. Then, a reduced scale prototype of the fully passive flapping foil has been designed and tested in a water channel. Thanks to an original dynamic tuning strategy of the structural parameters, experiments have been conducted for a wide range of configurations of the harvester. The investigation of the harvesting performances of the prototype helped identifying several optimized parameters sets. In such cases, hydraulic efficiencies as high as 30% have been reached. The main results of this thesis allow to consider a full scale fully passive flapping foil harvester in realistic conditions. As a matter of fact, the optimized cases identified for the reduced scale prototype can be naturally extended to real operating conditions
Labadie, Cécile. « Analyse fine et stabilisation des hydrolats de rose et de fleur d'oranger ». Thesis, Montpellier, 2015. http://www.theses.fr/2015MONTS039/document.
Texte intégralHydrosols are hydrodistillation products mainly used as food flavoring agents or ingredient in cosmetics. They contain less than 1 g/L of dispersed essential oils giving the organoleptic properties. These are subjected to microbial proliferation that can prevent use due to non-compliance to professional microbiological standards. The microorganisms, their growth dynamics, and the available nutrients in hydrosols remain unknown. Hydrosols can contain few preservatives, but there is no data about their efficiency in hydrosols.The aim of this study was to have a better knowledge on hydrosols composition, their microbiota, and spoilage conditions, in order to propose an adapted stabilization method.The composition in volatile compounds and the microbiota of 22 hydrosol samples of Citrus aurantium L. ssp. amara L. (orange blossom), Rosa damascena Miller (rose D.), and Rosa centifolia L. (rose C.) flowers were analyzed to determine factors responsible for decay. Some non-volatile compounds were likely carried over during distillation by a priming and foaming effect, and could be used as nutrients by microorganisms. Concentrations of volatile compounds in hydrosols are not high enough to prevent microbial proliferation, and bacteria concentrations can reach up to 106 CFU/mL in both hydrosols. The isolated microbial population was composed of oligotrophic Gram-negative bacteria, arranged in four major genera: Pseudomonas sp., Burkholderia cepacia complex, and presumably two new genera belonging to Acetobacteraceae and Rhodospirillaceae. Among those bacteria, Burkholderia vietnamiensis and Novosphingobium capsulatum were able to metabolize volatile compounds, such as geraniol to produce 6-methyl-5-hepten-2-one or geranic acid, or 2-phenylethyl acetate to produce 2-phenylethanol. Finally, the growth potential of a range of bacteria isolated from hydrosols and of pathogenic micro-organisms was evaluated, then the anti-microbial activity in nutrient broth and/or in hydrosols of a range of chemical preservatives authorized for food and cosmetic applications was tested.Additional hurdles such as chemical preservatives or aseptic packaging will be necessary to insure microbial stability
Melloni, Mattia <1989>. « From Lignocellulosic Biomass to Rare Sugars : Hydrolisis and Isomerization with Heterogeneous Catalysts ». Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2017. http://amsdottorato.unibo.it/8056/1/Melloni_Mattia_tesi.pdf.
Texte intégralStevenson, Pierre. « Contribution au développement d’un concept d’hybridation énergétique : structures de commande d’un système intégré éolien-hydrolien ». Thesis, Le Havre, 2015. http://www.theses.fr/2015LEHA0001/document.
Texte intégralAThis thesis addresses the problem of wind-tidal turbines hybridization. It first raises the hypothesis of a wind turbine based on Synchronous Permanent Magnet Machine (PMSM) and a tidal using a Double-Fed Induction Generator (DFIG). So, it presents the modeling of different elements that make up each system studied, from the turbine to the network connection through the electric machine and static converters. Control strategies are also developed. These are used to extract the maximum energy while taking into account the limitations of the systems. The thesis also examines two possible coupling of wind and tidal turbines which both use a PMSM. The simulation results of the models that we have developed in Matlab / Simulink / SimpowerSystem allow to validate the control strategies and conclude that a good choice would be to opt for coupling to the DC bus
Bjarne, Katrin. « Optimerad förfällning med hydrolys och fermentation av primärslam för utvinning av kolkälla till efterdenitrifikation ». Thesis, Uppsala universitet, Avdelningen för systemteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-210613.
Texte intégralWater treatment is costly, from both an economic and environmental point of view, since the need for precipitation chemicals, carbon sources and energy is high. It is therefore desirable to look for alternative solutions that enable plants to be more self-sustaining. Hammarby Sjöstadsverket is a pilot plant for wastewater treatment located in Henriksdal, a southeastern neighborhood of Stockholm. The plant is owned by IVL, Svenska Miljöinstitutet and Kungliga Tekniska Högskolan (KTH). Since the pilot plant was built in 2002, several different cleaning techniques have been evaluated with focus on striving for eco-friendly and eco-adapted systems. For instance, a pre-precipitation technique, so-called three step precipitation have been evaluated. The three step precipitation implicates that a metal salt followed by two different polymers are added in the flocculation chamber in the particular order to thereby enable to reduce a higher content of the organic material. In previous precipitation tests at Hammarby Sjöstadsverket, one managed to remove up to 90 % of the organic material using the three step precipitation (IVL, Hammarby Sjöstadsverket, 2011). This can be compared to a removal of only 75 % with ordinary pre-precipitation. This thesis aims to validate already obtained results within three step precipitation and with biological hydrolysis of primary sludge, extract a carbon source for post-denitrification containing as high concentrations of Volatile Fatty Acids (VFA) as possible and to investigate the cost of a wastewater treatment plant with three step precipitation, biogas generation and collection of internal carbon source from primary sludge at an upscaling corresponding to 100,000 person equivalents. Precipitation experiments were carried out in pilot scale with the precipitation chemicals, PAX-XL 36, combined with a low molecular weight organic polymer, Purfix-120, followed by a high molecular weight inorganic polymer, Super Flock C-494. The purpose of the three step precipitation was to validate the already produced results within three step precipitation and thus separate as large amounts of organic material as possible in the precipitation so that a primary sludge containing a high chemical oxygen demand (COD) can be obtained.Two different dosages of Purfix-120 were tested: 45 and 60 g/m3. The best reduction of COD and phosphorus were obtained when 193 g/m3 PAX XL-36 was combined with 60 g/m3 Purfix-120 and 0.025 g/m3 Super Flock C-494. Hereby a COD reduction of 75 % and a total phosphorus removal of 83 % were obtained. By hydrolysis of primary sludge in batch experiments Total Solid (TS) concentrations of 1, 2 and 3 % and residence times of up to eight days were examined. The purpose of the hydrolysis in this case was to investigate which TS concentration and residence time that gave the highest production of VFA. The experiments showed that a TS concentration of 3 % produced the highest amount of VFA and that the VFA production of the three different TS concentrations peaked at the second day. The VFA and COD production increased linearly for the three TS concentrations up until day five. After day five the COD and VFA production, for the TS concentrations of 1 and 2 %, started to decrease slightly. However TS 3 % did not show the same declining trend for VFA. Furthermore the daily ammonium and pH were investigated. As the VFA and COD concentration increased the ammonium concentration increased as well. pH had overall a decreasing trend. Four different denitrification tests were performed in batch experiments with the extracted hydrolyzate. The added COD content from the hydolyzate was either 3.3 or 4 times the initial nitrate concentration. The denitrification tests showed denitrification rates between 4.3 and 7 mg NO3-N / g volatile suspended solids * h with carbon-nitrogen ratios (C/N ratio) between 3.9 and 12.3 mg COD/mg NO3-N. The lowest C/N ratio received the lowest denitrification rate. However, it could not be concluded that the maximum C/N ratio had the highest denitrification rate. Futhermore the financial aspects were examined in order to investigate the cost of a wastewater treatment plant with three step precipitation, biogas generation and collection of internal carbon source from primary sludge at an upscaling corresponding to 100,000 person equivalents. The extraction of an internal carbon source would, despite loss of biogas production, be economically beneficial. Gain, in terms of not having to purchase an external carbon source, in this case ethanol, amounts to the amount of the biogas loss. The three step precipitation chemical costs were the largest item, amounting to 8,060,000 SEK. This cost versus less energy utilization in the biological step was also examined. In this case the savings in the biological step amounted to about 1/8 of precipitation chemical cost. Since the three step precipitation only managed to remove 75 % of the COD, a removal which corresponds to an ordinary pre-precipitation, the three step precipitation is considered to be economically unfavorable as it involves additional costs of polymers. Instead the three step precipitation should be replaced with a pre-precipitation. In summary it can be stated that an internal carbon source in the form of hydrolyzed primary sludge could replace an external carbon source in a functional way. However, steps must be taken to minimize the production of ammonium during sludge hydrolysis. From an economic perspective, the extraction of an internal carbon source would only be economical favorable if the three step precipitation is replaced with pre-precipitation.
Smuga-Kogut, Małgorzata. « Method for the preparation of bioethanol from rye straw using ionic liquid : PhD thesis summary : [synopsis] ». Rozprawa doktorska, [s.n.], 2014. http://dlibra.tu.koszalin.pl/Content/1319.
Texte intégralAkdogan, Amanda. « Biologisk slamhydrolys vid Ekeby reningsverk för framtagning av intern kolkälla ». Thesis, Karlstads universitet, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-80009.
Texte intégralCamili, Eloneida Aparecida [UNESP]. « Parâmetros operacionais do processo de produção de etanol a partir de polpa de mandioca ». Universidade Estadual Paulista (UNESP), 2010. http://hdl.handle.net/11449/101669.
Texte intégralConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
A crescente necessidade de ampliar de modo sustentável o uso de fontes renováveis de energia, para proporcionar maior segurança ao suprimento energético, e reduzir os impactos ambientais associados aos combustíveis fósseis, encontra no bioetanol uma alternativa viável economicamente e com significativo potencial de expansão. Atualmente, a produção de etanol de mandioca por processo fermentativo, visando sua utilização como combustível veicular, é limitada, principalmente em comparação a processos que utilizam a cana-de-açúcar como matéria prima, e o eficiente uso do bagaço gerado. Todavia, a possibilidade de se produzir etanol refinado a partir de mandioca in natura vem obtendo o interesse de alguns industriais da área, devido ao fato do produto apresentar um maior valor de mercado que o etanol carburante. Este trabalho teve como finalidade contribuir para a inovação do processo de obtenção de etanol a partir da mosturação de raízes da mandioca, a etapa de fermentação e caracterização dos produtos, utilizando um sistema de produção em escala laboratorial que simulou as operações numa planta industrial. Buscou-se definir as melhores condições de tempos de processo, catalisadores enzimáticos e concentrações de substrato. No sentido de promover uma inovação tecnologicamente viável, traçou-se um planejamento experimental que minimizasse as operações de preparo, definindo as condições mais adequadas para o processo de hidrólise e fermentativo. A primeira etapa do trabalho consistiu em estudar o tempo de sacarificação do amido contido na polpa de raízes de mandioca, utilizando um delineamento central composto rotacional (DCCR) 23 onde o valor da variável dependente (concentração de glicose do sacarificado) ficou em função das variáveis independentes (concentração de matéria seca, concentração de enzima dextrinizante e concentração...
Based on the increasing need of enlarging the use of renewable sources sustainably to provide greater security for energy supply and reduce environmental impacts associated with fossil fuels, bioethanol represents an economically viable alternative with significant potential of expansion. Currently, ethanol production from cassava through fermentation aimed at its use as vehicle fuel has been limited, mainly compared to processes employing sugarcane as raw material and the efficient use of the generated bagasse. However, the possibility of producing refined ethanol from cassava in natura has attracted the interest of some industries in the area, since this product has a higher market value than combustible ethanol. This work aimed to contribute to the innovation of the process of obtaining ethanol from cassava root mashing, as well as the stage of fermentation and characterization of products, using a production system in laboratory scale simulating operations in an industrial plant. We attempted to define the best... (Complete abstract click electronic access below)
Tekobon, Jerry. « Système multi physique de simulation pour l'étude de la production de l'énergie basée sur le couplage éolien offshore-hydrolien ». Thesis, Le Havre, 2016. http://www.theses.fr/2016LEHA0031/document.
Texte intégralThe thesis work concerns the development of a real-time emulation platform for theoretical and experimental studies of offshore wind and tidal power hybrid systems. Various energy coupling architectures are processed on the basis of the functional similarities of two systems and by both numerical and experimental emulation concepts. The notion of accelerated time used for real time simulation has been developed. The concept was validated on the experimental platform using the evolution of the mean power delivered by a small wind turbine. This approach can reduce the observation times of the measurement campaigns and could accelerate the studies for the wind potential of developing sites. We have also developed two types of coupling of the wind-tidal hybrid system. An electrical coupling based on the connection in parallel on a continuous bus of two turbines. We have developed an innovative concept of an electromechanical coupling based on the use of a single asynchronous generator on which the wind turbine and tidal turbine are simultaneously coupled. For this purpose, a vector-controlled servomotor was used to emulate the wind turbine while a synchronous motor was used as a tidal turbine emulator. The generator shaft is used as a mechanical coupling between the two systems. We have demonstrated in the experiments that we have developed the complementarity of the electrical productions of the two systems; we highlighted the need to add a storage system to compensate the simultaneous decrease of the two energy productions. The real time simulations results allow us to validate the feasibility of such a coupling
Karlsson, Erik, et Benjamin Sjöström. « Ekolodsmätningars förhållning mot olika insamlings- och interpolationsmetoder : En fallstudie på sjön Öjaren, Sandviken ». Thesis, Högskolan i Gävle, Samhällsbyggnad, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-32917.
Texte intégralTraditionally, large vessels armed with echo sounders have been used to conduct bathymetric surveys of the seas and oceans. Conducting surveys of shallow water have been troublesome since larger vessels cannot reach and survey shallow waters. To tackle that problem smaller unmanned surface vessels (USV) have been developed to survey shallow waters. It also helps in the areas closest to rocks that do not have updated depth measurements. This study aims to assess how a Seafloor HydroLite TM single-beam echo sounder mounted on a USV differs from other surveying methods. It also aims to evaluate which interpolation methods is most suitable for creating depth models by utilizing single-beam echo sounder data. It will also be studied how cross section lines affect the created depth using the USV. The experimental surveys with GNSS, measuring tape and single-beam echo sounder were used in the lake Öjaren that is located outside of Sandviken. In this study a total of 91 points were collected with GNSS and measuring tape and 8 sounding lines and 9 cross sections lines were collected using echo sounder mounted on the USV. The depth models were created in Surfer 10 using different interpolation methods i.e. kriging, natural neighbor and triangulation with linear interpolation. All calculation were performed in Microsoft Excel and the measurements collected with measuring tape were assumed as a “true” value to evaluate the different surveying techniques. The results showed that the depth model obtained using GNSS data is close to the depth model created using measuring tape data and shows lowest difference in comparison to the USV technique. The results from the comparison between interpolation methods showed that the use of different interpolation methods not have a significant impact on the depth model. The study concludes that the use of a single-beam echo sounder can help to create a more detailed depth model than using GNSS or measuring tape. It is also a cost effective method that helps collect more data in a short time. Though, some errors can appear in the data collected using the single-beam echo sounder that can be hard to detect. The cross section lines can contribute to a more detailed depth model and can be used as control points.
Livres sur le sujet "Hydrolics"
Hydrolith 2 : Surrealist research & Investigations. Berkeley, California : Oyster Moon Press, 2015.
Trouver le texte intégralUbysz, Dorota. Vinyl ether hydrolisis in aqueous solution. Ottawa : National Library of Canada, 1993.
Trouver le texte intégralWang, Yifu. Wang Yifu shui dian lun wen ji. [Shanghai] : Shanghai shi shui li fa dian gong cheng xue hui, 1997.
Trouver le texte intégralWang, Yifu. Wang Yifu shui dian lun wen ji. [Shanghai] : Shanghai shi shui li fa dian gong cheng xue hui, 1997.
Trouver le texte intégralSō shi Karyōshi sakuin. Taibei : Zong qing tu shu chu ban gong si, 1986.
Trouver le texte intégralGoode, Anthony Peter. Acid catalysed solubilisation and hydrolise of cellulose and starch. Birmingham : University of Birmingham, 1985.
Trouver le texte intégralMuliński, Zbigniew. Analiza matematyczna kinetyki hydrolizy pestycydowych substancji biologicznie czynnych preparatów typu EC. Szczecin : Akademia Rolnicza w Szczecinie, 2006.
Trouver le texte intégralZymon, Wiesław. Wpływ waruków hydrolizy soli glinu na efekty procesu koagulacji w uzdatnianiu wód. Kraków : Politechnika Krakowska, 2004.
Trouver le texte intégralTurner, Carl W. The preparation of lithium aluminate by the hydrolisis of lithium and aluminum alkoxides. Mississauga, Ont : Canadian Fusion Fuels Technology Project, 1987.
Trouver le texte intégralRaynes, Frank W. Domestic Sanitary Engineering and Plumbing : Dealing with Domestic Water Supplies, Pump & Hydraulic Ram Work, Hydrolics, Sanitary Work, Heating by Low Pressure, Hot Water, & External Plumbing Work. Creative Media Partners, LLC, 2018.
Trouver le texte intégralChapitres de livres sur le sujet "Hydrolics"
Nguyen, Sung-Lam, Omar Saifouni et Jean-François Destrebecq. « Incremental Formulation for Coupled Viscoelasticity and Hydrolock Effect in Softwood ». Dans Conference Proceedings of the Society for Experimental Mechanics Series, 387–95. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-21762-8_45.
Texte intégralRuiz, Rafico. « Icebergs in Iowa : Saudi dreams, Antarctic hydrologics and the production of Cold War environmental knowledge ». Dans Cold Science, 140–52. Abingdon, Oxon ; New York, NY : Routledge, 2019. | Series : Routledge studies in the history of science, technology and medicine ; 38 : Routledge, 2019. http://dx.doi.org/10.4324/9781315172736-9.
Texte intégral« hydrolith ». Dans Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 702. Berlin, Heidelberg : Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41714-6_81984.
Texte intégral« Hydrolith m ». Dans Wörterbuch GeoTechnik/Dictionary Geotechnical Engineering, 574. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-33335-4_81968.
Texte intégralTaber, Douglass F. « The Tanino Synthesis of (-)-Glycinoeclepin A ». Dans Organic Synthesis. Oxford University Press, 2013. http://dx.doi.org/10.1093/oso/9780199965724.003.0095.
Texte intégralActes de conférences sur le sujet "Hydrolics"
Clarke, H. « Management of Induced Seismicity During Hydrolic Fracturing in Real Time ». Dans 81st EAGE Conference and Exhibition 2019. European Association of Geoscientists & Engineers, 2019. http://dx.doi.org/10.3997/2214-4609.201902002.
Texte intégralPermana, Angga Aditya, Rohmat Taufiq et Salsabila Ramadhina. « Prototype Design of Mobile Application ‘Hydrolite’ for Hydroponics Marketplace ». Dans 2020 7th International Conference on Electrical Engineering, Computer Sciences and Informatics (EECSI). IEEE, 2020. http://dx.doi.org/10.23919/eecsi50503.2020.9251303.
Texte intégralNatsir, Hasnah, Marinda, Ahyar Ahmad, Abdul Wahid Wahab, Nunuk Hariani Soekamto, Siti Fauziah, Yusriadi, Rafsanjany Ramadan, Harningsih Karim et Fatahu. « Hydrolisis enzymatic protein from microsimbiont red algae Eucheuma cottonii as an antibacterial ». Dans INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT (ICEE 2021). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0059610.
Texte intégralMartins Varotti, Giovanni, LJUBICA TASIC, STEPHANIE F. FULAZ, Verônica L. Queiroz et Daniela Cypriano. « Cellulase imobilization on magnetite nanoparticles applied on biomass hydrolisis for ethanol 2G production ». Dans XXV Congresso de Iniciação Cientifica da Unicamp. Campinas - SP, Brazil : Galoa, 2017. http://dx.doi.org/10.19146/pibic-2017-78870.
Texte intégralLE MOINE, Olivier, Robin PASQUET, Philippe GEAIRON, Damien VOYER et Audrey BRUNEAU. « Étude multicritères de sites propices aux tests de prototypes hydroliens, de petites et moyennes puissances, dans la Mer des pertuis ». Dans Journées Nationales Génie Côtier - Génie Civil. Editions Paralia, 2018. http://dx.doi.org/10.5150/jngcgc.2018.062.
Texte intégral