Littérature scientifique sur le sujet « High strain-rates tests »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « High strain-rates tests ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "High strain-rates tests"
Piao, Ming Jun, Hoon Huh et Ik Jin Lee. « Characterization of Hardening Behavior at Ultra-High Strain Rate, Large Strain, and High Temperature ». Key Engineering Materials 725 (décembre 2016) : 138–42. http://dx.doi.org/10.4028/www.scientific.net/kem.725.138.
Texte intégralCadoni, Ezio, George Solomos et Carlo Albertini. « Concrete behaviour in direct tension tests at high strain rates ». Magazine of Concrete Research 65, no 11 (juin 2013) : 660–72. http://dx.doi.org/10.1680/macr.12.00175.
Texte intégralYounes, Ayham, Vignaesh Sankaran, André Seidel, Martin Waldmann, Chokri Cherif et Jan Hausding. « Stress-strain behavior of carbon filament yarns under high strain rates ». Textile Research Journal 82, no 7 (13 février 2012) : 685–99. http://dx.doi.org/10.1177/0040517511433151.
Texte intégralMentl, Vaclav, et Josef Bystricky. « Compression Tests of High Strength Steels ». Advanced Materials Research 59 (décembre 2008) : 293–98. http://dx.doi.org/10.4028/www.scientific.net/amr.59.293.
Texte intégralPark, Chung Hee, Seh Wan Jeong, Hoon Huh et Jung Su Park. « Material Behaviors of PBX Simulant with Various Strain Rates ». Key Engineering Materials 535-536 (janvier 2013) : 117–20. http://dx.doi.org/10.4028/www.scientific.net/kem.535-536.117.
Texte intégralSingh, Nilamber Kumar, Ezio Cadoni, Maloy K. Singha et Narinder K. Gupta. « Mechanical Behavior of Advanced High Strength Steel at High Strain Rates ». Applied Mechanics and Materials 82 (juillet 2011) : 178–83. http://dx.doi.org/10.4028/www.scientific.net/amm.82.178.
Texte intégralMeyer, Lothar W., Shawky Abdel-Malek et Norman Herzig. « Experimental Methods for Characterizing of Sheet Metals at High Strain Rates ». Key Engineering Materials 473 (mars 2011) : 474–81. http://dx.doi.org/10.4028/www.scientific.net/kem.473.474.
Texte intégralPiao, Ming Jun, Chung Hee Park, Hoon Huh et Ik Jin Lee. « Validation of Dynamic Hardening Models with Taylor Impact Tests at High Strain Rates ». Key Engineering Materials 626 (août 2014) : 389–96. http://dx.doi.org/10.4028/www.scientific.net/kem.626.389.
Texte intégralLei, S., Y. C. Shin et F. P. Incropera. « Material Constitutive Modeling Under High Strain Rates and Temperatures Through Orthogonal Machining Tests ». Journal of Manufacturing Science and Engineering 121, no 4 (1 novembre 1999) : 577–85. http://dx.doi.org/10.1115/1.2833062.
Texte intégralRey-de-Pedraza, V., F. Gálvez et D. Cendón Franco. « Measurement of fracture energy of concrete at high strain rates ». EPJ Web of Conferences 183 (2018) : 02065. http://dx.doi.org/10.1051/epjconf/201818302065.
Texte intégralThèses sur le sujet "High strain-rates tests"
Walker, A. G. « Mechanical behaviour of copper at high strain rates ». Thesis, Loughborough University, 1987. https://dspace.lboro.ac.uk/2134/10949.
Texte intégralShen, Yubin. « The chemical and mechanical behaviors of polymer / reactive metal systems under high strain rates ». Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45804.
Texte intégralRuiz, Daniel John. « Mechanical behaviour of materials at high rates of strain : a study of the double notch shear test ». Thesis, University of Oxford, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.280611.
Texte intégralTodesco, Sérgio Roberto. « Projeto e construção de um dispositivo para ensaio de impacto em materiais, barra de compressão ». Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-13032018-103518/.
Texte intégralThis dissertation presents a design of a device to collect characteristic data of materials submitted to the high strain rates, device that takes the name of its idealizer the English engineer Sir Bertram Hopkinson. More specifically, this dissertation is inseparably linked to the development of a package for the transport of radioactive elements as part of the general scope of a CAPES project in partnership with the Materials Science and Technology Center (CCTM), Nuclear and Energy Research Institute IPEN - CNEN / SP, autarchy associated with the University of São Paulo. The development of the device is part of the scope of procurement, and collection of data required for the design, and the construction of the packaging. This dissertation deals with the mechanical design of the device, important, divided into two parts, dimensioning of the bars, which would be the impact bar, the input and output bars and the design of the impact device. The sizing of the bars involves knowledge of the concept of elastic waves in solid media so that the length of the bars is estimated in order to serve as a guide for the elastic waves, which will cause deformation in the test body, and enable a good reading of these waves for analysis of the data. The impact device has to be robust enough to produce the stress wave that deforms the test body but not to deform the bars plastically, which will have to continue throughout the test within the elastic regime.
Lee, Chih-Chun, et 李季春. « A Study on Material Tests in High Strain Rates ». Thesis, 2009. http://ndltd.ncl.edu.tw/handle/32824664376501112901.
Texte intégral國立臺灣大學
機械工程學研究所
97
The finite element method has been widely applied to simulate the crashworthiness tests in the automotive industry. However, in the high strain-rate deformation, the yield strength and ultimate tensile strength of a material may be changed. In order to obtain accurate results, the stress-strain relations of the material in high strain rates are required for the simulations of the crashworthiness tests. There are various high strain-rate tests available to obtain the stress-strain relations, such as the split Hopkinson bar system, direct impact method, and servo hydraulic system. Each test method is applicable in certain strain-rate range. In the present study, the servo hydraulic system MTS819 was adopted to implement the high rate tests in a strain-rate range below 500s-1. The testing equipment including the machine frame, load cell, and data acquisition system was fine tuned first to make it suitable for the tests. As strain rate increasing, the amplitude of the stress vibration acquired from load cell increases. Hence, the efforts to determine the cause of the stress vibration and the remedy approaches were made. The actual strain rate measured in specimen during the test was considered. It was found that there is an acceleration zone in the beginning of the test. So it is important to determine when the strain rate comes to a constant strain rate. The stress-strain curves acquired from the experiments conducted in the present study were fitted by the Cowper-Symonds equation and then input to the finite element software for simulations. Through the finite element simulations, the actual strain rates in specimen and stress distributions in the grip during experiment were investigated. The finite element simulations were also performed to examine the strain rate effect on the impact of a hydro-formed engine cradle to a rigid wall. The experimental approach and the finite element simulations results obtained in the present study could be valuable references for the future researches in field of deformation on the high strain rates.
Pires, Tiago Leonel Marques Carmona Afonso. « Barra de Pressão de Hopkinson ». Master's thesis, 2016. http://hdl.handle.net/10400.26/15072.
Texte intégralNowadays, for the realization of any project it’s necessary to make an accurate choice of the materials that are going to be used, and for that you need to know how they behave before the various factors present. These behaviors are usually studied in destructive tests at high strain rate, such as the system of the Split Hopkinson Pressure Bar. This works aims to create a design of a Split Hopkinson Pressure Bar to be built in the laboratory of the Department of Science and Technology of the Portuguese Naval Academy, so that the future Cadets of the Naval Engineering Class of the Mechanical Branch can perform tests and study the behavior of the material in high strain rates. In this Dissertation is explained the whole theory behind the system of a Split Hopkinson Pressure Bar and all the steps that were taken to the creation of design, in order to simplify the best possible way, all physics that is behind this system, in order to facilitate the reading
Chapitres de livres sur le sujet "High strain-rates tests"
Kwon, J. B., H. Huh et C. N. Ahn. « An Improved Technique for Reducing the Load Ringing Phenomenon in Tensile Tests at High Strain Rates ». Dans Dynamic Behavior of Materials, Volume 1, 253–57. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-22452-7_35.
Texte intégralWolff, C., et A. R. Bunsell. « Testing of Composites at High Strain Rates Using ± 45° Shear Test ». Dans Developments in the Science and Technology of Composite Materials, 653–58. Dordrecht : Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0787-4_90.
Texte intégralEl-Magd, E., et M. Abouridouane. « Compression Test on Magnesium Alloy MgAl8Zn at High Strain Rates and Temperatures ». Dans Magnesium Alloys and their Applications, 324–29. Weinheim, FRG : Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607552.ch51.
Texte intégralFletcher, Lloyd, et Fabrice Pierron. « A Simple Data-Rich IBII Test for Identifying All Orthotropic Stiffness Components at High Strain Rates ». Dans Dynamic Behavior of Materials, Volume 1, 53–56. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-86562-7_9.
Texte intégralLok, T. S., X. B. Li, P. J. Zhao, D. S. Liu, S. R. Lan et G. H. Yeo. « Uniaxial compression tests on granite and its complete stress-strain relationship at high strain rates ». Dans Frontiers of Rock Mechanics and Sustainable Development in the 21st Century, 85–87. CRC Press, 2020. http://dx.doi.org/10.1201/9781003077510-17.
Texte intégralZhang, Weigang, Changming Xie, Xi Wei et Min Ge. « C/C-ZrB2-ZrC-SiC Composite Derived from Polymeric Precursor Infiltration and Pyrolysis ». Dans MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments, 435–59. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-4066-5.ch014.
Texte intégralBrara, Ahmed. « Critical Infrastructure : Design and Behavior of Materials Under Impact and Explosion Loads ». Dans Critical Energy Infrastructure Protection. IOS Press, 2022. http://dx.doi.org/10.3233/nicsp220004.
Texte intégral« Propagated Fish in Resource Management ». Dans Propagated Fish in Resource Management, sous la direction de JOSEPH R. KOZFKAY, DANIEL J. SCHILL et DAVID M. TEUSCHER. American Fisheries Society, 2004. http://dx.doi.org/10.47886/9781888569698.ch41.
Texte intégralActes de conférences sur le sujet "High strain-rates tests"
Lei, Shuting, Yung C. Shin et Frank P. Incropera. « Material Constitutive Modeling Under High Strain Rates and Temperatures Through Orthogonal Machining Tests ». Dans ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1140.
Texte intégralLall, Pradeep, Sandeep Shantaram, Mandar Kulkarni, Geeta Limaye et Jeff Suhling. « Constitutive Behavior of SAC Leadfree Alloys at High Strain Rates ». Dans ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/ipack2011-52194.
Texte intégralQin Fei, An Tong et Chen Na. « Dynamic behavior tests of lead-free solders at high strain rates by the SHPB technique ». Dans 2008 International Conference on Electronic Packaging Technology & ; High Density Packaging (ICEPT-HDP). IEEE, 2008. http://dx.doi.org/10.1109/icept.2008.4607060.
Texte intégralLall, Pradeep, Sandeep Shantaram, Jeff Suhling et David Locker. « Mechanical Behavior of Sn1Ag0.5Cu and Sn3Ag0.5Cu Alloys at High Strain Rates ». Dans ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-93059.
Texte intégralLall, Pradeep, Di Zhang et Vikas Yadav. « High Strain-Rate Constitutive Behavior of SAC305 Solder During Operation at High Temperature ». Dans ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-39518.
Texte intégralWest, Ashby, Garrett Venable, Michael Flanagan, Evan Harris, Brad G. Davis, F. Todd Davidson et Joseph Hanus. « Constitutive Modeling and Validation of Sintered Metal Powders Subjected to Large Strains and High Strain Rates ». Dans ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-71461.
Texte intégralMunson, Douglas, Timothy M. Adams et Shawn Nickholds. « Determination of Tensile Elastic Modulus in High Density Polyethylene Piping at Seismic Strain Rates ». Dans ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78777.
Texte intégralHojjati, Reza, Matthias Steinhoff, Steven Cooreman, Filip Van den Abeele et Patricia Verleysen. « Effects of High Strain Rates on Ductile Slant Fracture Behaviour of Pipeline Steel : Experiments and Modelling ». Dans 2016 11th International Pipeline Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/ipc2016-64332.
Texte intégralSohoni, G. S., M. V. Walame, V. Tandon, R. S. Mahajan et S. Raju. « Dynamic Behavior Characterization of Lead at High Strain Rates Using High Speed Photography for Finite Element Simulation ». Dans ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82693.
Texte intégralIsakov, Matti, Jeremy Seidt, Kauko O¨stman, Amos Gilat et Veli-Tapani Kuokkala. « Characterization of a Ferritic Stainless Sheet Steel in Simple Shear and Uniaxial Tension at Different Strain Rates ». Dans ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63141.
Texte intégralRapports d'organisations sur le sujet "High strain-rates tests"
Cox, Bradley. Fiber Bragg Grating validation tests to measure high-strain rates at elevated temperatures. Office of Scientific and Technical Information (OSTI), septembre 2015. http://dx.doi.org/10.2172/1215806.
Texte intégralTENSILE BEHAVIOUR OF TMCP Q690D HIGH-STRENGTH STRUCTURAL STEEL AT STRAIN RATES FROM 0.00025 TO 760 S-1. The Hong Kong Institute of Steel Construction, mars 2022. http://dx.doi.org/10.18057/ijasc.2022.18.1.7.
Texte intégral