Littérature scientifique sur le sujet « HELICAL ABRASIVE FLOW »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « HELICAL ABRASIVE FLOW ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "HELICAL ABRASIVE FLOW"
Wang, A. Cheng, Kuan Yu Chen, Ken Chuan Cheng et H. H. Chiu. « Elucidating the Effects of Helical Passageways in Abrasive Flow Machining ». Advanced Materials Research 264-265 (juin 2011) : 1862–67. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.1862.
Texte intégralXu, Yong Chao, Ke Hua Zhang, Shuang Lu et Zhi Qiang Liu. « Experimental Investigations into Abrasive Flow Machining of Helical Gear ». Key Engineering Materials 546 (mars 2013) : 65–69. http://dx.doi.org/10.4028/www.scientific.net/kem.546.65.
Texte intégralWang, A. Cheng, Ken Chuan Cheng, Kuan Yu Chen et Yan Cherng Lin. « Finishing Performance of the Abrasive Flow Machining in Complex Holes by Using Helical Cores ». Key Engineering Materials 831 (février 2020) : 52–56. http://dx.doi.org/10.4028/www.scientific.net/kem.831.52.
Texte intégralCheng, Ken Chuan, Kuan Yu Chen, A. Cheng Wang et Yan Cherng Lin. « Study the Rheological Properties of Abrasive Gel with Various Passageways in Abrasive Flow Machining ». Advanced Materials Research 126-128 (août 2010) : 447–56. http://dx.doi.org/10.4028/www.scientific.net/amr.126-128.447.
Texte intégralKumar, Rahul, Qasim Murtaza et R. S. Walia. « Three Start Helical Abrasive Flow Machining For Ductile Materials ». Procedia Materials Science 6 (2014) : 1884–90. http://dx.doi.org/10.1016/j.mspro.2014.07.220.
Texte intégralBrar, B. S., R. S. Walia, V. P. Singh et M. Sharma. « A Robust Helical Abrasive Flow Machining (HLX-AFM) Process ». Journal of The Institution of Engineers (India) : Series C 94, no 1 (janvier 2013) : 21–29. http://dx.doi.org/10.1007/s40032-012-0054-9.
Texte intégralLi, Junye, Shangfu Zhu, Jinbao Zhu, Chengyu Xu, Hengfu Zhang, Guangfeng Shi, Weihong Zhao et Jianhe Liu. « Quality prediction of polygonal helical curved tube by abrasive flow precision machining ». International Journal of Advanced Manufacturing Technology 119, no 1-2 (9 novembre 2021) : 827–39. http://dx.doi.org/10.1007/s00170-021-07984-6.
Texte intégralButola, Ravi, Qasim Murtaza, R. S. Walia et Pradeep kumar. « Two start and Three Start Helical Abrasive Flow Machining for Brittle Materials ». Materials Today : Proceedings 4, no 2 (2017) : 3685–93. http://dx.doi.org/10.1016/j.matpr.2017.02.263.
Texte intégralWang, A. Cheng, Ken Chuan Cheng, Kuan Yu Chen et Yan-Cherng Lin. « Enhancing the Surface Precision for the Helical Passageways in Abrasive Flow Machining ». Materials and Manufacturing Processes 29, no 2 (février 2014) : 153–59. http://dx.doi.org/10.1080/10426914.2013.852204.
Texte intégralWang, A. Cheng, Ken Chuan Cheng, Kuan Yu Chen et Cheng Chin Chien. « Elucidating the optimal parameters of a helical passageway in abrasive flow machining ». International Journal of Surface Science and Engineering 9, no 2/3 (2015) : 145. http://dx.doi.org/10.1504/ijsurfse.2015.068239.
Texte intégralThèses sur le sujet "HELICAL ABRASIVE FLOW"
Hsieh, Yu-Chi, et 謝育齊. « Study on the Effects of Helical Passageways in Abrasive Flow Machining ». Thesis, 2011. http://ndltd.ncl.edu.tw/handle/17756689594138493100.
Texte intégral清雲科技大學
機械工程所
99
Abrasive Flow Machining(AFM) is a efficient method of surface polishing, especially it can quickly remove recasting layers which made by wire electrical discharge machining (WEDM). However, AFM methods have difficulty achieving uniform roughness of an axial distribution in circular hole polishing due to limited unitary axial motion of abrasive media. Therefore, this study design a special mechanism of the helical flow passageway to perform multiple flowing paths of an abrasive medium, then the fluid produced in the polishing of multi-directional path to achieve the purposes of uniform polishing. For this investigation, we consider the comparisons both simulation and experiment method. Above all, CFD-ACE+ numerical software was used in the simulation of abrasive flow in the helical mold core to understand the behaviors of abrasive velocity distribution and shear strain rate changes. Analytical results indicate that the design of helical passageway will obviously produce multi-directional flowing path, and we can infer it effectively improve the axial uniformity of surface roughness by the deviation of shear strain rate changes. Finally, Experiment proceeding designed a variety consists of different type and different size of mold cores to verify the effectiveness of helical passageway in AFM polishing, such as the number of helical grooves, the gap between work-piece surface and helical edge, the thickness of helical slot and the number of turns. Based on the experiment results, it showed that the helical passageway is superior to circular passageway in reducing roughness improvement rate (RIR) by roughly 76% compared with RIR 61% for the circular passageway, which design conditions including for four helices groove, 0.5 mm gap, 0.5 mm thickness of helical slot and one helical turn.
Lin, Min-Han, et 林明翰. « Effect of Helical Passageway in the Polygon Hole Using Abrasive Flow Machining ». Thesis, 2008. http://ndltd.ncl.edu.tw/handle/99159093801635307437.
Texte intégral清雲科技大學
機械工程研究所
96
Abrasive flow machining (AFM) is a simple and efficiency polishing method. But it is difficult to get the uniform roughness in the polygon hole polishing, due to the axial movement of the abrasive medium in the working process. Therefore, helical cores with different shape are put in the hole to form various channels that change the mechanism of AFM form the simple axial motion to the multiple directions. Computational fluid dynamics (CFD) software was used here to simulate the motion of abrasive medium in the polygon holes. Velocity and strain rate of the abrasive medium in the channels were obtained by simulations to design the passageway that uniform roughness could be found. Simulation results shown that the abrasive medium would produce irregular variances by placing helical core in the polygon hole. That is to say the media have the motion with different directions. And in experimental results, the surface roughness could be uniformity when polygon hole close to circular.
PANWAR, MANSI. « EXPERIMENTAL INVESTIGATION OF HELICAL ABRASIVE FLOW MACHINE SETUP FOR DIFFERENT TYPES OF WORKPIECE MATERIAL ». Thesis, 2016. http://dspace.dtu.ac.in:8080/jspui/handle/repository/14771.
Texte intégralActes de conférences sur le sujet "HELICAL ABRASIVE FLOW"
Sharma, Dipti, Kamal K.Kar et J. Ramkumar. « Finishing of helical gears using abrasive flow finishing ». Dans Proceedings of the International Conference on Nanotechnology for Better Living. Singapore : Research Publishing Services, 2016. http://dx.doi.org/10.3850/978-981-09-7519-7nbl16-rps-100.
Texte intégralBrar, B. S., R. S. Walia, V. P. Singh et P. Singh. « Effects of Helical Rod Profiles in Helical Abrasive Flow Machining (HLX-AFM) Process ». Dans ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-53711.
Texte intégralCheng, Ken-Chuan, Hsin-Min Lee, A.-Cheng Wang et Yan-Cherng Lin. « Study of the optimal helical passageways in complex-hole polishing by abrasive flow machining ». Dans 2017 International Conference on Applied System Innovation (ICASI). IEEE, 2017. http://dx.doi.org/10.1109/icasi.2017.7988255.
Texte intégralZhang, K., et D. Z. Wu. « Research on the Solid-Liquid Two-Phase Flow in a Helical Groove Seal ». Dans ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/fedsm2018-83105.
Texte intégralChen, Yi, Abhay Patil, Yiming Chen, Gerald Morrison et Marisela Rojas. « An Experimental Investigation on the Erosion of a Helico-Axial Pump With Gas Presence ». Dans ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/fedsm2020-20481.
Texte intégral