Littérature scientifique sur le sujet « Hastelloy X »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Hastelloy X ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Hastelloy X"
Çakır, Fatih Hayati, Mehmet Alper Sofuoğlu et Selim Gürgen. « Machining of Hastelloy-X Based on Finite Element Modelling ». Advanced Engineering Forum 30 (novembre 2018) : 1–7. http://dx.doi.org/10.4028/www.scientific.net/aef.30.1.
Texte intégralXie, Jilin, Yingche Ma, Meiqiong Ou, Weiwei Xing, Long Zhang et Kui Liu. « Evaluating the Microstructures and Mechanical Properties of Dissimilar Metal Joints Between a New Cast Superalloy K4750 and Hastelloy X Alloy by Using Different Filler Materials ». Materials 11, no 10 (22 octobre 2018) : 2065. http://dx.doi.org/10.3390/ma11102065.
Texte intégralHussain, Zain, Zuhair Khan, Asghar Ali, Nisar Ahmad, Wajahat Qasim et Altamash Shabbir. « Corrosion Behavior of MoSi<sub>2</sub> ; Coated Hastelloy X Utilized in Iodine -Sulfur Cycle for Hydrogen Production Application ». Solid State Phenomena 336 (30 août 2022) : 35–41. http://dx.doi.org/10.4028/p-g30x7e.
Texte intégralWu, Horng Yu, Hsu Cheng Liu, Feng Jun Zhu et Chui Hung Chiu. « Constitutive Analysis of Ni-Base Superalloy Hastelloy X under Hot Compression Based on Thermodynamics ». Applied Mechanics and Materials 252 (décembre 2012) : 73–76. http://dx.doi.org/10.4028/www.scientific.net/amm.252.73.
Texte intégralZhang, Shuzhe, Yunpei Lei, Zhen Chen, Pei Wei, Wenjie Liu, Sen Yao et Bingheng Lu. « Effect of Laser Energy Density on the Microstructure and Texture Evolution of Hastelloy-X Alloy Fabricated by Laser Powder Bed Fusion ». Materials 14, no 15 (31 juillet 2021) : 4305. http://dx.doi.org/10.3390/ma14154305.
Texte intégralBanoth, Santhosh, Thaviti Naidu Palleda, Sota Shimazu et Koji Kakehi. « Yttrium’s Effect on the Hot Cracking and Creep Properties of a Ni-Based Superalloy Built Up by Additive Manufacturing ». Materials 14, no 5 (28 février 2021) : 1143. http://dx.doi.org/10.3390/ma14051143.
Texte intégralKiessler, Gonde, et Gerhard Elssner. « Gemeinschaftsversuch an einer beschichteten Hastelloy-X-Probe / Group Trials on a Specimen of Coated Hastelloy-X ». Practical Metallography 37, no 3 (1 mars 2000) : 123–39. http://dx.doi.org/10.1515/pm-2000-370303.
Texte intégralCho, Hyun, et Byeong-Woo Lee. « High temperature properties of surface-modified Hastelloy X alloy ». Journal of the Korean Crystal Growth and Crystal Technology 22, no 4 (31 août 2012) : 183–89. http://dx.doi.org/10.6111/jkcgct.2012.22.4.183.
Texte intégralXuewen, Zong, Zhang Jian et Fu Hanguang. « Effect of laser inclination angle on mechanical properties of Hastelloy X processed by selective laser melting ». Materials Testing 63, no 1 (1 janvier 2021) : 10–16. http://dx.doi.org/10.1515/mt-2020-0001.
Texte intégralSandhi, Ketan Kumar, et Jerzy Szpunar. « Analysis of Corrosion of Hastelloy-N, Alloy X750, SS316 and SS304 in Molten Salt High-Temperature Environment ». Energies 14, no 3 (21 janvier 2021) : 543. http://dx.doi.org/10.3390/en14030543.
Texte intégralThèses sur le sujet "Hastelloy X"
Nguyen, Vy Thuy. « Onset of Arizona Road Dust in High Temperature Environment on a Cooled HASTELLOY X Surface ». Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/83519.
Texte intégralMaster of Science
Graneix, Jérémie. « Étude du soudage LASER Yb : YAG homogène et hétérogène des superalliages Hastelloy X et Haynes 188 ». Thesis, Toulouse, INPT, 2015. http://www.theses.fr/2015INPT0114/document.
Texte intégralNowadays, the complexity of mechanical parts is becoming more and more important in numerous cutting-edge insdustries such as aeronautics, aerospace or the medical field. To meet such new requirements, particulary in terms of geometry, innovative conception and automated manufacturing techniques, integrating as well a better traceability of parts, are implemented. This thesis is in partnership with The LGP (Laboratoire Génie de Production) of the National Engineering School of Tarbes (ENIT) and EXAMECA, a company specialized in boiler making for aerospace applications. The study essentially focused on permanent assembly of superalloy parts by LASER welding, in order to develop a new turbomachinery combustion chamber. Assembly of different parts of the combustion chamber are presently performed by TIG (Tungsten Inert Gas) process, or GTAW (USA : Gas Tungsten Arc Welding) process. This manufacturing phase is realized in a manual mode with semi-automatic equipment providing the wire with a similar grade as the nickel base superalloy. Even though this industrial process has been proven, it can still cause noncompliance issues because it requires great dexterity from operators to avoid important deformations of welded parts. Therefore, this study aimed at evaluating the relevance of LASER Yb : YAG welding process, for homogeneous and heterogeneous assembly of Hastelloy X and Haynes 188 superalloys, without filler metal. Autogeneous welding process associated with LASER Yb : YAG disc source is still relatively new in the industry even though it seems to offer very promising perspectives. A first part of the study is dedicated to LASER beam’s caustic characterization, in order to determine key parameters for welding, including shape and size of LASER spot, power density distribution on the surface or at focal point. Once this phase was completed, fields of weldability of homogeneous assemblies of Hastelloy X and Haynes 188 superalloys as well as heterogeneous assemblies of Hastelloy X / Haynes 188 have been determined. Impact of main welding parameters on geometry (shape and size) and mechanical strength beads were identifed. Optimal welding conditions have been established for different welding conditions. A metallurgical study on optimized beads, obtained for different configurations, has been carried out at different scales. It allowed determining relationships between parameters and welding modes (conduction or keyhole), but also between welding modes and microstructures of different beads areas that condition mechanical properties
Hutchinson, John Patrick. « Experimental Investigations of the Onset of Sand Deposits on Hastelloy-X between 1000 C and 1100 C ». Thesis, Virginia Tech, 2016. http://hdl.handle.net/10919/83233.
Texte intégralMaster of Science
Saarimäki, Jonas. « The mechanical properties of lattice truss tructures with loadbearing shells made of selectively laser melted Hastelloy X (TM) ». Thesis, KTH, Industriell produktion, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-41320.
Texte intégralOliveira, Célio Roberto de Lima. « Utilização dos ensaios de ultrassom e correntes parasitas no acompanhamento da oxidação em revestimentos TBC com NiCrAl e YSZ sobre liga de Inconel 718 e Hastelloy X ». Universidade Tecnológica Federal do Paraná, 2016. http://repositorio.utfpr.edu.br/jspui/handle/1/1977.
Texte intégralThis paper presents an evaluation of the use of non-destructive methods with ultrasound and eddy currents, monitoring of life and characterization of thermal barrier coatings (TBC). This coatings are used to protect base metal components that operate at high temperatures. With the method that uses the ultrasonic characterization of ceramic layer was made an estimating their porosity through the sound propagation of velocity in the coating. The test with eddy currents was used here to make an electrical characterization of materials coated, following the changes of electrical conductivity through the phase angle monitoring following their lifecycle. Also with this method are made the measurements of coatings thickness, following the growth of the thermally grown oxide layer and sintering of the ceramic layer. To validate the results obtained by non-destructive methods, these results were compared with results from analyzes micrograph of the samples used. For evaluation of pre-oxidation in the sample coatings were separated into two groups based metal Inconel 718 and Hastelloy X base metal. The group of samples with Inconel 718 when subjected to the oxidation test showed the formation of an alumina layer up to 30 cycles of the testwith the passing of the cycles were formed oxides of nickel and chromium which grew quickly leading the coating to the cracks. The samples of Hastelloy X in substrate oxidation test showed predominantly alumina to form up more than one layer of the same oxide no showed oxides of nickel and chromium, and no cracks in the test sample are showed in TBC layer. The use of non destructive testing has shown effective to follow the life cycle of TBC coatings. Where the monitoring of variations in thickness, showed little difference in value with respect to measurements metallographic method. The reading of electrical conductivity through the phase angle is a good indicator of formation of harmful oxides which were nickel and chromium oxides, which was evidenced by tests on MEV/EDS. It was observed that the ultrasound velocity has an inversely proportional relation to the porosity of the ceramic layer, that analyzed using metallographic method.
MARCHESE, GIULIO. « Study and characterisation of Ni-based superalloys produced by laser additive manufacturing ». Doctoral thesis, Politecnico di Torino, 2017. http://hdl.handle.net/11583/2694925.
Texte intégralLiu, Hsu-Cheng, et 劉許成. « Constitutive Analysis of Superalloy Hastelloy-X under Hot compression ». Thesis, 2014. http://ndltd.ncl.edu.tw/handle/71653876915129796180.
Texte intégral中華大學
機械工程學系碩士班
102
Abstract Hot deformation characteristics of Hastelloy X Ni-base superalloy were investigated at elevated temperatures. Hot compressive tests were carried out in the temperature and strain rate ranges from 900 to 1150 °C and 0.001 to 1 s–1, respectively. The constitutive equation relating flow stress, temperature, and strain rate was obtained based on the peak stresses. The flow behavior showed that the softening mechanisms were related to the dynamic recovery (DRV) and dynamic recrystallization (DRX). The flow stress of Hastelloy X was fitted well by the constitutive equation of the hyperbolic sine function. The constitutive analysis suggested that the hot deformation mechanism of the Hastelloy X was dislocation creep. The flow stress of Hastelloy X was fitted well by the constitutive equation of the hyperbolic sine function. The constitutive analysis suggested that the hot deformation mechanism of the Hastelloy X was dislocation creep.Q value437KJ/mol,stress exponent (n)5.4。 Keywords: Hastelloy X superalloy, Flow behavior, Dynamic softening, Constitutive analysis. Dynamic recrystallization ,DRX、Dynamic recovery,DRV。
Du, Chao-Wei, et 杜昭緯. « Comparisons of Mechanical Properties of GTAW and LASER Welded Hastelloy X Superalloy ». Thesis, 2008. http://ndltd.ncl.edu.tw/handle/12430820850968696582.
Texte intégral義守大學
機械與自動化工程學系碩士班
96
This research deals the problems that cracks induced by metal fatigue and structural aging effect, which can’t be repaired by traditional Gas Tungsten Arc Welding (GTAW) and cause the increasing of defect rate. Although some cracks might still be accepted and qualified to field service according to military regulation, nevertheless, some problems, for example brazing and coating area, can’t be overcome by traditional welding technology. In order to lower the defect rate, seeking new processes and decreasing the component defects to keep the cost down are needed. In this study, Hastelloy X superalloy was chosen as the test material, which was performed mechanical tests by adopting Nd-YAG Laser and traditional GTAW processes. Moreover, by the use of OM and SEM, macro- and microstructure were observed that were compared with hardness testing. On the other hand, residual stress after welding was measured by X-ray diffraction. As the research results, traditional welding technology shows better ultimate tensile strength and ductility. For Nd:YAG laser welding, residual stress only exists in the both side of weld (3mm) and drops very quickly; however, higher amplitude and widely spread in the GTAW welding. If combine both technology, the repairing process could be optimized and keep the welding quality in high level in order to lower the defective rate and save time for repairing.
Graneix, Jérémie. « Étude du soudage LASER Yb : YAG homogène et hétérogène des superalliages Hastelloy X et Haynes 188 ». Phd thesis, 2015. http://oatao.univ-toulouse.fr/15523/1/Graneix_1.pdf.
Texte intégralJang, Hung-Chi, et 簡桓祺. « Effect of Laser Surface Treatment on the Properties of High- temperature Oxidation Resistance of Hastelloy-X ». Thesis, 1993. http://ndltd.ncl.edu.tw/handle/83008456156665899277.
Texte intégralLivres sur le sujet "Hastelloy X"
Castelli, Michael G. Thermomechanical deformation behavior of a dynamic strain aging alloy, Hastelloy X. [Washington, DC] : National Aeronautics and Space Administration, 1992.
Trouver le texte intégralLaszlo, Berke, Murthy P. L. N et United States. National Aeronautics and Space Administration., dir. Material data representation of hysteresis loops for Hastelloy X using artificial neural networks. [Washington, DC] : National Aeronautics and Space Administration, 1994.
Trouver le texte intégralLaszlo, Berke, Murthy P. L. N et United States. National Aeronautics and Space Administration., dir. Material data representation of hysteresis loops for Hastelloy X using artificial neural networks. [Washington, DC] : National Aeronautics and Space Administration, 1994.
Trouver le texte intégralChapitres de livres sur le sujet "Hastelloy X"
Mohd Nor, Nor Aznan, B. T. Hang Tuah Baharudin, Zulkiflle Leman et Mohd Khairol Anuar Mohd Ariffin. « Cutting Force in Dry Slot-Milling of Hastelloy X ». Dans Lecture Notes in Mechanical Engineering, 1–7. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2890-1_1.
Texte intégralCasperson, Mallory, Jay Carroll, Wael Abuzaid, John Lambros, Huseyin Sehitoglu, Mike Spottswood et Ravinder Chona. « Studying Thermomechanical Fatigue of Hastelloy X using Digital Image Correlation ». Dans Experimental and Applied Mechanics, Volume 6, 575–78. New York, NY : Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9792-0_84.
Texte intégralLu, Y. L., L. J. Chen, P. K. Liaw, G. Y. Wang, M. L. Benson, S. A. Thompson, J. W. Blust et al. « Elevated-Temperature Crack-Growth Behavior of Nickel-Base Hastelloy® X Alloy ». Dans Materials Lifetime Science & ; Engineering, 33–42. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118788035.ch4.
Texte intégralKim, Woo Gon, Sang Nan Yin, Woo Seog Ryu et Jong Hwa Chang. « Creep Properties of Hastelloy-X Alloy for the High Temperature Gas-Cooled Reactor ». Dans Experimental Mechanics in Nano and Biotechnology, 1105–8. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-415-4.1105.
Texte intégralDeshmukh, Poonam, Ambar Choubey, A. N. Jinoop, C. P. Paul, S. S. Mohite et K. S. Bindra. « Laser Polishing of Laser Additive Manufactured Hastelloy-X : Parametric Dependence and Process Optimization ». Dans Advances in Materials and Mechanical Engineering, 339–46. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0673-1_27.
Texte intégralKim, Woo Gon, Song Nan Yin, Woo Seog Ryu, Yong Wan Kim et Won Yi. « Creep Curve Modeling of Hastelloy-X Alloy by Using the Nonlinear Regression Method in the Kachanov-Rabotnov Creep Model ». Dans The Mechanical Behavior of Materials X, 589–92. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-440-5.589.
Texte intégralBilgin, Guney Mert, Cansinem Tuzemen, Cemre Tigli et Yesim Nur Gulcan. « Investigation of Microstructure and Mechanical Properties of SLM-Produced Inconel 718 and Hastelloy-X Alloys ». Dans Structural Integrity of Additive Manufactured Materials & ; Parts, 340–51. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2020. http://dx.doi.org/10.1520/stp163120190133.
Texte intégralRajesh, C. Anil, P. Naik Parrikar, S. Abotula et A. Shukla. « Effect of Boundary Conditions on the Thermo-Mechanical Response of Hastelloy® X Plates Subjected to Shock Loading ». Dans Dynamic Behavior of Materials, Volume 1, 301–5. Cham : Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06995-1_43.
Texte intégralDiljith, P. K., A. N. Jinoop, C. P. Paul, P. Krishna, S. Bontha et K. S. Bindra. « Elucidating Corrosion Behavior of Hastelloy-X Built Using Laser Directed Energy Deposition-Based Additive Manufacturing in Acidic Environments ». Dans Advances in Materials and Mechanical Engineering, 347–55. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0673-1_28.
Texte intégralMills, Kenneth C. « Ni - Hastelloy-X ». Dans Recommended Values of Thermophysical Properties for Selected Commercial Alloys, 175–80. Elsevier, 2002. http://dx.doi.org/10.1533/9781845690144.175.
Texte intégralActes de conférences sur le sujet "Hastelloy X"
« 3D Residual Stresses in Selective Laser Melted Hastelloy X ». Dans Residual Stresses 10. Materials Research Forum LLC, 2016. http://dx.doi.org/10.21741/9781945291173-13.
Texte intégralBeamer, Chad, Derek Denlinger, Suraj Rao et Christina Dinh. « High Pressure Heat Treatment for L-PBF Hastelloy X ». Dans HT2021. ASM International, 2021. http://dx.doi.org/10.31399/asm.cp.ht2021p0044.
Texte intégralVarela J., Luis A., Calvin M. Stewart et Ali P. Gordon. « Modeling the Creep of Hastelloy X Using the Miller and Walker Unified Viscoplastic Constitutive Models ». Dans ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45108.
Texte intégralSadek, A., et H. Song. « Optimization of Heat Treatment Parameters for Additive Manufacturing Hastelloy X ». Dans MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019mst/2019/mst_2019_13_21.
Texte intégralSadek, A., et H. Song. « Optimization of Heat Treatment Parameters for Additive Manufacturing Hastelloy X ». Dans MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019/mst_2019_13_21.
Texte intégralMusalek, Radek, Jan Medricky, Zdenek Pala, Ondrej Kovarik, Libor Tomek, Nicholas Curry et Stefan Bjorklund. « Fatigue Performance of TBCs on Hastelloy X Substrate during Cyclic Bending ». Dans ITSC2015, sous la direction de A. Agarwal, G. Bolelli, A. Concustell, Y. C. Lau, A. McDonald, F. L. Toma, E. Turunen et C. A. Widener. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.itsc2015p0406.
Texte intégralCoskun, M. Bulut, Serdar Aksoy, Necdet Basaran et Mahmut F. Aksit. « Friction and Wear Characteristics of H25, H188, H214 Against Hastelloy X ». Dans ASME/STLE 2011 International Joint Tribology Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ijtc2011-61110.
Texte intégralBright, Robin, Paul Jacobs, Mark Aindow et Harris Marcus. « The influence of pulse parameters on the laser drilling of hastelloy X ». Dans ICALEO® 2007 : 26th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2007. http://dx.doi.org/10.2351/1.5060995.
Texte intégralChen, Lijia, Peter K. Liaw, Robert L. McDaniels, James W. Blust, Paul F. Browning, Rodger R. Seeley et Dwain L. Klarstrom. « Low-Cycle Fatigue of Nickel-Based Superalloy Hastelloy X at Elevated Temperatures ». Dans ASME Turbo Expo 2001 : Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/2001-gt-0422.
Texte intégralCaiazzo, Fabrizia, Gaetano Corrado, Vittorio Alfieri, Vincenzo Sergi et Luigi Cuccaro. « Disk-laser welding of Hastelloy X cover on René 80 turbine stator blade ». Dans XIX International Symposium on High-Power Laser Systems and Applications, sous la direction de Kerim R. Allakhverdiev. SPIE, 2013. http://dx.doi.org/10.1117/12.2010572.
Texte intégral