Littérature scientifique sur le sujet « Hard superalloys »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Hard superalloys ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Hard superalloys"
Kursuncu, Bilal, Halil Caliskan, Sevki Yilmaz Guven et Peter Panjan. « Wear Behavior of Multilayer Nanocomposite TiAlSiN/TiSiN/TiAlN Coated Carbide Cutting Tool during Face Milling of Inconel 718 Superalloy ». Journal of Nano Research 47 (mai 2017) : 11–16. http://dx.doi.org/10.4028/www.scientific.net/jnanor.47.11.
Texte intégralPan, Lei, ZR Wu, Lei Fang et YD Song. « Investigation of surface damage and roughness for nickel-based superalloy GH4169 under hard turning processing ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture 234, no 4 (16 novembre 2019) : 679–91. http://dx.doi.org/10.1177/0954405419885789.
Texte intégralPrasad, Ganesha, Raghavendra Kamath C. et Vijay G.S. « A review on conventional and nonconventional machining of Nickel-based Nimonic superalloy ». Manufacturing Review 10 (2023) : 10. http://dx.doi.org/10.1051/mfreview/2023009.
Texte intégralZahedi, Ali, et J. Akbari. « FEM Analysis of Single Grit Chip Formation in Creep-Feed Grinding of Inconel 718 Superalloy ». Advanced Materials Research 325 (août 2011) : 128–33. http://dx.doi.org/10.4028/www.scientific.net/amr.325.128.
Texte intégralDíaz-Álvarez, José, Antonio Díaz-Álvarez, Henar Miguélez et José Cantero. « Finishing Turning of Ni Superalloy Haynes 282 ». Metals 8, no 10 (18 octobre 2018) : 843. http://dx.doi.org/10.3390/met8100843.
Texte intégralMukhtarov, Shamil, Artem Ganeev, Marsel Nagimov, Ruslan Shakhov, Vener Valitov et Farid Utyashev. « Manufacturing of Axisymmetric Components out of Superalloys and Hard-to-Deform Steels by Roll Forming ». Key Engineering Materials 746 (juillet 2017) : 69–74. http://dx.doi.org/10.4028/www.scientific.net/kem.746.69.
Texte intégralALTIN, Abdullah. « Determination of Cutting Tool Performance Characteristics in Machining Nickel Based Super Alloys ». International Conference on Applied Engineering and Natural Sciences 1, no 1 (20 juillet 2023) : 416–20. http://dx.doi.org/10.59287/icaens.1031.
Texte intégralJean, Ming-Der, Shu-Yi Tu et Jen-Ting Wang. « Analysis of Hard-Facing Appearance of Specific Powdered Superalloys for PTA-Coating Processes ». Journal of Materials Engineering and Performance 14, no 3 (1 juin 2005) : 307–14. http://dx.doi.org/10.1361/10599490523904.
Texte intégralDíaz-Álvarez, Antonio, José Díaz-Álvarez, José Luis Cantero et Henar Miguélez. « Sustainable High-Speed Finishing Turning of Haynes 282 Using Carbide Tools in Dry Conditions ». Metals 9, no 9 (6 septembre 2019) : 989. http://dx.doi.org/10.3390/met9090989.
Texte intégralLi, Yuebing, Yanming He, Chuanyang Lu, Wenjian Zheng, Jianguo Yang, Donghong Wang, Limei Wang, Yuan Sun et Zengliang Gao. « Microstructural Evolution and Mechanical Evaluation of a Laser-Induced Composite Coating on a Ni-Based Superalloy during Thermal Exposure ». Materials 12, no 9 (3 mai 2019) : 1439. http://dx.doi.org/10.3390/ma12091439.
Texte intégralThèses sur le sujet "Hard superalloys"
Karamched, Phani Shashanka. « Deformation studies near hard particles in a superalloy ». Thesis, University of Oxford, 2011. http://ora.ox.ac.uk/objects/uuid:e740592d-8d82-4c12-9bfe-99901d132b60.
Texte intégralSIVO, ANTONIO. « On the Laser Powder Bed Fusion based processing route for hard to weld Nickel Superalloys ». Doctoral thesis, Politecnico di Torino, 2022. http://hdl.handle.net/11583/2971609.
Texte intégralAgode, Kofi Edoh. « Analyse et modélisation du comportement à l’usure des outils de coupe en carbure de tungstène pour différentes teneurs en cobalt lors de l’usinage de l’alliage de titane Ti-6Al-4V ». Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0141.
Texte intégralDue to their high hardness and wear resistance, cemented carbide (WC-Co) is the main material used to manufacture machining tools and forming tooling, as well as wear parts requiring high hardness and high precision. The modification of tungsten carbide microstructure, and more particularly its cobalt content, is currently attracting the greatest interest from manufacturers to develop new grades tools with high performance, and then expand new markets.This thesis aims to study the effect of the cobalt content of carbide tools on the measured values and wear mechanisms when machining hard superalloys such as the aeronautical titanium alloys Ti-6Al-4V. Both experimental and numerical research work are devoted on one hand to the understanding of the microscopic damage mechanisms leading to the macroscopic wear of the WC-Co composite and on the other hand, to the influence of the cobalt content on the behavior of the WC-Co taking into account the mechanical-microstructure-damage coupling.On the basis of an experimental analysis, the identification of the macroscopic and microscopic physical phenomena involved at the tool/chip and tool/workpiece contact interfaces was conducted. Machining tests were firstly carried out on the tool-material couple WC-Co/Ti-6Al-4V with different cobalt contents for the tools (from 6 to 15%). In a second step, a tribological characterization of the same tool-material couple was carried out to evaluate the influence of the cobalt content and the contact conditions (sliding speed, applied force) on the friction coefficient and wear. However, the inaccessibility of the contact zones during machining and the tribological tests did not allow a complete description of the wear mechanisms observed, whether macroscopic mechanisms (adhesion, abrasion, deformation, ...), or microscopic mechanisms (cracking, damage of the WC and Co phases). The numerical simulation using finite elements (FE) proved to be a very interesting complementary tool for the analysis of these wear mechanisms.Our modeling strategy focused on the response of WC-Co at the microstructure scale for the thermomechanical loading close to that obtained by machining. The proposed model takes into account the behavior of the WC and Co phases separately and that of the interfaces WC-WC and WC-Co of the composite. This strategy allowed to study and identify parameters influencing the behavior of the microstructure from the elastic stage to the damage initiation. A good agreement was obtained between the results of the numerical behavior at the initiation of damage in the microstructure and those of the experimental observations in terms of the effects of the cobalt content in the tungsten carbide and of the applied machining conditions
Chapitres de livres sur le sujet "Hard superalloys"
Casteletti, L. C., A. Lombardi Neto, D. T. de Macedo, L. B. Cruvinel et George Totten. « Stellite Superalloy Powder Deposition on 7075 Aluminum Alloy ». Dans Encyclopedia of Aluminum and Its Alloys. Boca Raton : CRC Press, 2019. http://dx.doi.org/10.1201/9781351045636-140000303.
Texte intégralHall, Christopher. « 5. Making stuff and making things ». Dans Materials : A Very Short Introduction, 83–101. Oxford University Press, 2014. http://dx.doi.org/10.1093/actrade/9780199672677.003.0005.
Texte intégralActes de conférences sur le sujet "Hard superalloys"
Ratay, Jason, et Hitomi Yamaguchi. « Characteristics of Diamond Abrasive Used in Magnetic Abrasive Finishing of Nickel-Based Superalloys ». Dans ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8365.
Texte intégralBranagan, D. J., M. C. Marshall, B. E. Meacham, L. F. Aprigliano, R. Bayles, E. J. Lemieux, T. Newbauer et al. « Wear and Corrosion Resistant Amorphous / Nanostructured Steel Coatings For Replacement of Electrolytic Hard Chromium ». Dans ITSC2006, sous la direction de B. R. Marple, M. M. Hyland, Y. C. Lau, R. S. Lima et J. Voyer. ASM International, 2006. http://dx.doi.org/10.31399/asm.cp.itsc2006p0733.
Texte intégralRajesh Jha, George Stavo Dulikravich et Marcelo Jose Colaco. « Design and optimization of rare-earth free hard magnetic alloys and Nickel-based superalloys for high temperature applications ». Dans 23rd ABCM International Congress of Mechanical Engineering. Rio de Janeiro, Brazil : ABCM Brazilian Society of Mechanical Sciences and Engineering, 2015. http://dx.doi.org/10.20906/cps/cob-2015-1284.
Texte intégralPasupuleti, Thejasree, Manikandan Natarajan, Loganayagan Shanmugam, Jothi Kiruthika, Mude Ramesh Naik et Gowthami Kotapati. « Application of Taguchi Based ANFIS Approach in Wire Electrical Discharge Machining of Inconel 625 for Automobile Applications ». Dans International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0148.
Texte intégralNatarajan, Manikandan, Thejasree Pasupuleti, Gnana Sagaya Raj, V. Kumar, Lakshmi Narasimhamu Katta et Jothi Kiruthika. « Machinability Studies and the Evolution of Hybrid Artificial Intelligent Tools for Advanced Machining of Nickel Alloy for Aerospace Applications ». Dans International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0065.
Texte intégralOgata, Takashi, et Takayuki Sakai. « Life Prediction Method of CC and DS Ni Base Superalloys Under High Temperature Biaxial Fatigue Loading ». Dans ASME Turbo Expo 2009 : Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59069.
Texte intégralTapphorn, R., H. Gabel, K. Hashimoto et T. Crowe. « Kinetic Metallization of Interior Diameter Bores ». Dans ITSC 2012, sous la direction de R. S. Lima, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, A. McDonald et F. L. Toma. ASM International, 2012. http://dx.doi.org/10.31399/asm.cp.itsc2012p0311.
Texte intégralLi, Y. L., C. L. Ma et H. Zhang. « Crystallographic Orientation Evolution in NbSS-Nb5Si3 Eutectic Alloys by EBSD Analyses ». Dans ASME Turbo Expo 2013 : Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-95309.
Texte intégralLi, Ji, Rongcan Zhou, Liying Tang, Bohan Wang, Shufang Hou, Jiang Li, Weiguo Liu, Hongyu Liu et Xiaomin Li. « Effect of Aging Heat-Treatment on the Creep Behavior of Inconel 740H Used in 700 °C A-USC Power Plants ». Dans AM-EPRI 2019, sous la direction de J. Shingledecker et M. Takeyama. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.am-epri-2019p0448.
Texte intégralPasupuleti, Thejasree, Manikandan Natarajan, V. Kumar, Lakshmi Narasimhamu Katta, Jothi Kiruthika et R. Silambarasan. « Predictive Modelling and Process Parameter Prediction for Monel 400 Wire Electrical Discharge Machining for Rocket Frames ». Dans International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0088.
Texte intégral