Bibliographies thématiques / Graphene - Photovoltaics

Littérature scientifique sur le sujet « Graphene - Photovoltaics »

Auteur : Grafiati
Publié le 7 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Graphene - Photovoltaics ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Graphene - Photovoltaics"

1

Bin, Zihang. « A comparison between the mainstream heterojunction PV studies ». Applied and Computational Engineering 7, no 1 (21 juillet 2023) : 29–34. http://dx.doi.org/10.54254/2755-2721/7/20230327.

Texte intégral
Résumé :
Among the wide range of third-generation photovoltaic power generation technologies, there is a widely used type of photovoltaic - heterojunction photovoltaic cells. Although each of the different types of heterojunction photovoltaics has been studied in depth, no one has considered the direct application of the different types of heterojunction photovoltaics at the application level. This paper introduces the composition and advantages of heterojunction photovoltaic cells, and briefly introduces graphene/n-type amorphous silicon heterojunction photovoltaic, organic compound/inorganic heterojunction photovoltaic, and inorganic/inorganic heterojunction photovoltaic represented by CuO and Zn2O, and summarizes the different photovoltaic conversion efficiencies, preparation methods, and other key information of these cells, and compares these information. In particular, whether the photovoltaic conversion efficiency can reach the shockley-queisser limit is examined. Among them, the photoconversion efficiency of graphene/n-type amorphous silicon heterojunction and simple metal oxide heterojunction was not very satisfactory, and finally the heterojunction PV cell constructed by the byorganic cavity-conducting material led by Graezel et al. was chosen among the different research directions of organic/inorganic heterojunction PV cells. Cavity-conducting material combined with a titanium dioxide nanofilm with adsorbed dye as a relatively ideal heterojunction PV cell for comparison was examined in this paper, which provides a proposal for the commercial development of new heterojunction PV cells in the future.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Zibouche, Nourdine, George Volonakis et Feliciano Giustino. « Graphene Oxide/Perovskite Interfaces For Photovoltaics ». Journal of Physical Chemistry C 122, no 29 (juillet 2018) : 16715–26. http://dx.doi.org/10.1021/acs.jpcc.8b03230.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Keyvani-Someh, Ehsan, Zachariah Hennighausen, William Lee, Rachna C. K. Igwe, Mohamed Elamine Kramdi, Swastik Kar et Hicham Fenniri. « Organic Photovoltaics with Stacked Graphene Anodes ». ACS Applied Energy Materials 1, no 1 (12 décembre 2017) : 17–21. http://dx.doi.org/10.1021/acsaem.7b00020.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Liu, Thomas, Claire Tonnelé, Shen Zhao, Loïc Rondin, Christine Elias, Daniel Medina-Lopez, Hanako Okuno et al. « Vibronic effect and influence of aggregation on the photophysics of graphene quantum dots ». Nanoscale 14, no 10 (2022) : 3826–33. http://dx.doi.org/10.1039/d1nr08279e.

Texte intégral
Résumé :
Graphene quantum dots, atomically precise nanopieces of graphene, are promising nanoobjects with potential applications in various domains such as photovoltaics, quantum light emitters and bio-imaging.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Larsen, Lachlan J., Cameron J. Shearer, Amanda V. Ellis et Joseph G. Shapter. « Solution processed graphene–silicon Schottky junction solar cells ». RSC Advances 5, no 49 (2015) : 38851–58. http://dx.doi.org/10.1039/c5ra03965g.

Texte intégral
Résumé :
Surfactant-assisted exfoliated graphene (SAEG) has been implemented in transparent conducting graphene films which, for the first time, were used to make SAEG–silicon Schottky junctions for photovoltaics.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Petridis, Constantinos, Dimitrios Konios, Minas M. Stylianakis, George Kakavelakis, Maria Sygletou, Kyriaki Savva, Pavlos Tzourmpakis et al. « Solution processed reduced graphene oxide electrodes for organic photovoltaics ». Nanoscale Horizons 1, no 5 (2016) : 375–82. http://dx.doi.org/10.1039/c5nh00089k.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Yeh, Te-Fu, Chiao-Yi Teng, Liang-Che Chen, Shean-Jen Chen et Hsisheng Teng. « Graphene oxide-based nanomaterials for efficient photoenergy conversion ». Journal of Materials Chemistry A 4, no 6 (2016) : 2014–48. http://dx.doi.org/10.1039/c5ta07780j.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Ibrayev, N., E. Seliverstova et A. Zhumabekov. « Preparation of graphene nanostructured films for photovoltaics ». IOP Conference Series : Materials Science and Engineering 447 (21 novembre 2018) : 012068. http://dx.doi.org/10.1088/1757-899x/447/1/012068.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Cox, Marshall, Alon Gorodetsky, Bumjung Kim, Keun Soo Kim, Zhang Jia, Philip Kim, Colin Nuckolls et Ioannis Kymissis. « Single-layer graphene cathodes for organic photovoltaics ». Applied Physics Letters 98, no 12 (21 mars 2011) : 123303. http://dx.doi.org/10.1063/1.3569601.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Yong, Virginia, et James M. Tour. « Theoretical Efficiency of Nanostructured Graphene-Based Photovoltaics ». Small 6, no 2 (18 janvier 2010) : 313–18. http://dx.doi.org/10.1002/smll.200901364.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Graphene - Photovoltaics"

1

Conlon, Benjamin Patrick. « Solving Series Resistance Problems In GaSb Thermophotovoltaics with Graphene and Other Approaches ». Thesis, Virginia Tech, 2017. http://hdl.handle.net/10919/78286.

Texte intégral
Résumé :
GaSb Thermophotovoltaics are a key technology in the search for the ability to power small scale autonomous systems. In this work, MBE grown GaSb photovoltaic devices are fabricated and tested under AM 1.5 conditions. These devices displayed short circuit current values as high as 40 mA/cm2 but were found to have poor series resistance. The parasitic resistive characteristics were factored out of the measured cell data and it was found that the photocurrent for the fabricated devices could be as much as 6 mA/cm2 higher then the measured short circuit current. An additional layer of metal was added to the reduce the deleterious resistance characteristics, and it was found to lower the series resistance down to a 4 Ω average across almost all of the devices. The average JSC for all of these devices increased to over 30 mA/cm2, with highs well over 40 mA/cm2, a more consistent result than the original single metal deposition devices. Graphene was applied to the originally fabricated devices in an attempt to remove the series resistances issues as well as act as a surface passivation layer. The graphene was able to reduce series resistance by as much as 50% on some of the devices, with a corresponding 6 mA/cm2 increase in short circuit current exhibited. The photocurrent and diode current values were not changed by more than a measurement error, an indication that surface passivaiton may not have taken place. Graphene was a suitable approach for solving the series resistance issue and its use as both a transparent conductive layer and surface passivation material deserve further investigation.
Master of Science
Styles APA, Harvard, Vancouver, ISO, etc.
2

Park, Hyesung Ph D. Massachusetts Institute of Technology. « Application of CVD graphene in organic photovoltaics as transparent conducting electrodes ». Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/84386.

Texte intégral
Résumé :
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 184-191).
Graphene, a hexagonal arrangement of carbon atoms forming a one-atom thick planar sheet, has gained much attention due to its remarkable physical properties. Apart from the micromechanical cleavage of highly ordered pyrolytic graphite (HOPG), several alternate methods have been explored to achieve reliable and repeatable synthesis of large-area graphene sheets. Among these, the chemical vapor deposition (CVD) process has been demonstrated as an efficient way of producing continuous, large area graphene films and the synthesis of graphene sheets up to 30-inch has been reported. Similar to graphene research, solar cells based on organic materials have also drawn significant attention as a possible candidate for the generation of clean electricity over conventional inorganic photovoltaics due to the interesting properties of organic semiconductors such as high absorption coefficients, light weight and flexibility, and potentially low-cost, high throughput fabrication processes. Transparent conducting electrodes (TCE) are widely used in organic photovoltaics, and metal oxides such as indium tin oxide (ITO) have been commonly used as window electrodes. Usually used as thin films, these materials require low sheet resistance (Rsh) with high transparency (T). Currently the dominant material used in the industry standard is ITO. However, these materials are not ideal options for organic photovoltaic applications due to several reasons: (1) non-uniform absorption across the visible to near infrared region; (2) chemical instability; (3) metal oxide electrodes easily fracture under large bending, and they are not suitable for flexible solar cell applications; (4) limited availability of indium on the earth leading to increasing costs with time. Therefore, the need for alternative/replacement materials for ITO is ever increasing and ideally need to be developed with the following characteristics: low-cost, mechanically robust, transparent, electrically conductive, and ultimately should demonstrate comparable or better performance compared to ITO-based photovoltaic devices. With superior flexibility and good electrical conductivity, as well as abundance of source material (carbon) at lower costs compared to ITO, in this thesis, we propose that the CVD graphene can be a suitable candidate material as TCE in organic photovoltaic applications, satisfying the aforementioned requirements.
by Hyesung Park.
Ph.D.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Brinkman, Daniel. « Modeling and numerics for two partial differential equation systems arising from nanoscale physics ». Thesis, University of Cambridge, 2013. https://www.repository.cam.ac.uk/handle/1810/244667.

Texte intégral
Résumé :
This thesis focuses on the mathematical analysis of two partial differential equation systems. Consistent improvement of mathematical computation allows more and more questions to be addressed in the form of numerical simulations. At the same time, novel materials arising from advances in physics and material sciences are creating new problems which must be addressed. This thesis is divided into two parts based on analysis of two such materials: organic semiconductors and graphene. In part one we derive a generalized reaction-drift-diffusion model for organic photovoltaic devices -- solar cells based on organic semiconductors. After formulating an appropriate self-consistent model (based largely on generalizing partly contradictory previous models), we study the operation of the device in several specific asymptotic regimes. Furthermore, we simulate such devices using a customized 2D hybrid discontinuous Galerkin finite element scheme and compare the numerical results to our asymptotics. Next, we use specialized asymptotic regimes applicable to a broad range of device parameters to justify several assumptions used in the formulation of simplified models which have already been discussed in the literature. We then discuss the potential applicability of the simulations to real devices by discussing which parameters will be the most important for a functioning device. We then give further generic 2D numerical results and discuss the limitations of the model in this regime. Finally, we give several perspectives on proving existence and uniqueness of the model. In part two we derive a second-order finite difference numerical scheme for simulation of the 2D Dirac equation and prove that the method converges in the electromagnetically static case. Of particular interest is the application to electrons in graphene. We demonstrate this convergence numerically with several examples for which explicit solutions are known and discuss the manner in which errors appear and propagate. We furthermore extend the Dirac system with Poisson's equation to investigate interesting electronic effects. In particular, we show that our numerical scheme can successfully simulate a beam-splitter and Veselago lens, both of which have been predicted analytically to appear in graphene.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Holder, Jenna Ka Ling. « Quantum structures in photovoltaic devices ». Thesis, University of Oxford, 2013. http://ora.ox.ac.uk/objects/uuid:d23c2660-bdba-4a4f-9d43-9860b9aabdb8.

Texte intégral
Résumé :
A study of three novel solar cells is presented, all of which incorporate a low-dimensional quantum confined component in a bid to enhance device performance. Firstly, intermediate band solar cells (IBSCs) based on InAs quantum dots (QDs) in a GaAs p-i-n structure are studied. The aim is to isolate the InAs QDs from the GaAs conduction band by surrounding them with wider band gap aluminium arsenide. An increase in open circuit voltage (VOC) and decrease in short circuit current (Jsc) is observed, causing no overall change in power conversion efficiency. Dark current - voltage measurements show that the increase in VOC is due to reduced recombination. Electroreflectance and external quantum efficiency measurements attribute the decrease in Jsc primarily to a reduction in InGaAs states between the InAs QD and GaAs which act as an extraction pathway for charges in the control device. A colloidal quantum dot (CQD) bulk heterojunction (BHJ) solar cell composed of a blend of PbS CQDs and ZnO nanoparticles is examined next. The aim of the BHJ is to increase charge separation by increasing the heterojunction interface. Different concentration ratios of each phase are tested and show no change in Jsc, due primarily to poor overall charge transport in the blend. VOC increases for a 30 wt% ZnO blend, and this is attributed largely to a reduction in shunt resistance in the BHJ devices. Finally, graphene is compared to indium tin oxide (ITO) as an alternative transparent electrode in squaraine/ C70 solar cells. Due to graphene’s high transparency, graphene devices have enhanced Jsc, however, its poor sheet resistance increases the series resistance through the device, leading to a poorer fill factor. VOC is raised by using MoO3 as a hole blocking layer. Absorption in the squaraine layer is found to be more conducive to current extraction than in the C70 layer. This is due to better matching of exciton diffusion length and layer thickness in the squaraine and to the minority carrier blocking layer adjacent to the squaraine being more effective than the one adjacent to the C70.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Belchi, Raphaëlle. « Architectures à base de nanostructures de carbone et TiO₂pour le photovoltaïque ». Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLS329/document.

Texte intégral
Résumé :
Le photovoltaïque est une énergie renouvelable pouvant aider à lutter contre le réchauffement climatique et l’épuisement des ressources fossiles utilisées pour la production d’énergie. La filière émergente à base de matériaux pérovskites (photovoltaïque de 3ème génération) est très prometteuse car elle utilise des matériaux abondants et faciles à mettre en œuvre (technologie bas-coût) et a montré de plus des rendements record compétitifs en peu de temps. Il reste cependant des verrous technologiques à lever afin de pouvoir développer cette technologie à grande échelle. L’un deux consiste à améliorer la couche de TiO₂ qui transporte les électrons et dont les défauts limitent les performances et la durée de vie des cellules photovoltaïques pérovskites. Ce travail propose l’utilisation de matériaux à base de nanostructures de carbone et de TiO₂ pour améliorer le transport et la collecte des électrons au sein de ces cellules photovoltaïques et ainsi améliorer leur rendement. Pour cela, la pyrolyse laser, technique singulière de production continue de nanoparticules, a été adaptée pour l’élaboration de nanocomposites TiO₂/graphène aux propriétés contrôlées. Ces matériaux ont été caractérisés puis intégrés aux cellules photovoltaïques pérovskites qui ont démontré une meilleure efficacité en présence de graphène. Par ailleurs, ce travail présente une architecture innovante à base de nanotubes de carbone alignés verticalement, en vue d’une application pour la collecte des électrons photo-générés des cellules photovoltaïques pérovskites. Les matériaux carbonés présentent donc de fortes potentialités pour l’optoélectronique, et plus particulièrement pour le photovoltaïque de 3ème génération
Photovoltaic is a promising renewable energy to tackle global warming and the depletion of fossil resources. The emerging field of perovskite solar cells (3rd generation photovoltaic) is very attractive because it uses abundant and easy-processing materials (low-cost technology) and provides competitive efficiencies.Still, efforts remain to be performed to develop this technology, especially concerning the improvement of efficient and reliable charge transporting electrodes. Titanium dioxide layer, commonly used for electron extraction, presents defects that limit the performance and lifetime of the perovskite solar cells.This work proposes the use of materials based on TiO₂ and carbon nanostructures to improve the electron transport and collection within the solar cells, in order to enhance the power conversion efficiency. The singular technique of laser pyrolysis, which is a continuous process of nanoparticles synthesis, was adapted to produce TiO₂/graphene nanocomposites with well-controlled properties. These materials have been characterized and integrated into perovskite solar cells that demonstrate an improved efficiency in presence of graphene.Besides, this work presents an innovating architecture based on vertically aligned carbon nanotubes for the electron collection of a perovskite solar cell. We show then the strong potential of carbon materials for optoelectronic, especially 3rd generation photovoltaic
Styles APA, Harvard, Vancouver, ISO, etc.
6

Mulderig, Andrew J. « Performance and Active Layer Morphology of P3HT-PCPDTBT Organic Photovoltaic Cells ». University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1457619609.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Handloser, Karl Matthias. « Optical investigation of charge carrier dynamics in organic semiconductors and graphene for photovoltaic applications ». Diss., Ludwig-Maximilians-Universität München, 2014. http://nbn-resolving.de/urn:nbn:de:bvb:19-168562.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Azevedo, Joël. « Assemblage contrôlé de graphène et de nanotubes de carbone par transfert de films de tensioactifs pour le photovoltaïque ». Phd thesis, Université Paris Sud - Paris XI, 2013. http://tel.archives-ouvertes.fr/tel-00846430.

Texte intégral
Résumé :
Cette thèse est dédiée à l'étude d'une nouvelle méthode de formation de films ultra-minces de nanomatériaux carbonés sur surface. Basée sur le transfert d'un film d'eau stabilisé par des tensioactifs, elle permet notamment la réalisation et l'étude de films de nanotubes de carbone et d'oxyde de graphène (GO) aux propriétés remarquables. L'efficacité de l'approche développée est prouvée au travers de l'ajustement précis des caractéristiques des films. Pour l'assemblage d'objets bidimensionnels cette approche est particulièrement pertinente puisque la planéité des feuillets de GO est conservée quelle que soit leur taille. Les avantages de l'approche ne se limitent pas à la réalisation de monocouches à morphologie contrôlée mais s'étendent à la réalisation de films multicouches d'épaisseur ajustée et de très faible rugosité. De plus, cette approche est modulable et permet le transfert de films de nano-objets sur des surfaces de différentes mouillabilités et de grandes dimensions (transfert à l'échelle de wafers). L'intérêt du graphène oxydé en tant qu'analogue du graphene ne se justifie que par une désoxygénation (réduction) efficace du matériau idéalement complétée par une réparation de sa structure sp². Cette thèse aborde ces deux aspects. Les électrodes transparentes à base d'oxyde de graphène réduit (rGO) réalisées au cours de cette thèse sont parmi les plus performantes du domaine. Les résultats présentés incluent également un travail important sur les caractérisations électriques des feuillets individuels et des films de GO et de rGO. Ainsi, nous avons prouvé qu'il est possible de mesurer leur conductivité sans contact, par voie électrochimique (Scanning Electrochemical Microscopy). Même si les performances des électrodes en rGO n'atteignent pas celles des électrodes en graphène, les films réalisés peuvent d'ores et déjà être intégrés dans des dispositifs photovoltaïques. Nos travaux permettent de contribuer au domaine émergeant des cellules basées sur l'hétérojonction entre film de nano-objets carbonés et silicium. Dans le cadre de cette thèse nous montrons en particulier que les analyses par Time Resolved Microwave Conductivity sont complémentaires des mesures effectuées à l'échelle des cellules photovoltaïques, chacune permettant de caractériser, sous des angles différents, l'efficacité de séparation des charges photo-induites. Les travaux réalisés au cours de cette thèse contribuent aux problématiques dépendantes d'assemblage et d'intégration des nano-objets carbonés dans des dispositifs en ouvrant de nombreuses perspectives dans ces domaines en rapide évolution.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Dasari, Mallika. « DESIGN, SYNTHESIS, AND CHARACTERIZATION OF NANOCOMPOSITES TO IMPROVE THE PERFORMANCE OF PHOTOVOLTAIC CELLS ». OpenSIUC, 2016. https://opensiuc.lib.siu.edu/dissertations/1276.

Texte intégral
Résumé :
My PhD thesis work is to design, synthesize, and characterize inexpensive and reliable nanocomposites for the photovoltaic (PV) devices. Photovoltaic materials utilized in our studies were synthesized using simple and inexpensive methods. The material properties were tailored and optimized to improve the optical absorption and charge transport properties. The PV cells fabricated with these materials exhibited improved power conversion efficiencies (PCE). The origin of charge generation and charge transfer was studied using different photoactive materials such as CdSe quantum dots (QDs), perylene-3, 4, 9, 10-tetracarboxylic-3, 4, 9, 10-dianhydride (PTCDA), poly(3-hexylthiophene) (P3HT), multiwalled carbon nanotubes (MWCNTs), multilayer graphene (MuLG), and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM).
Styles APA, Harvard, Vancouver, ISO, etc.
10

Wang, Shujun. « Synthesis of Graphene Quantum Dots and Their Applications in Sensing and Light Harvesting ». Thesis, Griffith University, 2017. http://hdl.handle.net/10072/366102.

Texte intégral
Résumé :
Graphene quantum dot (GQD) is a derivative of 2D material graphene. It normally refers to small fragments of graphene having lateral size below 100nm. Not only do GQDs inherit some of the wonder properties of bulk graphene, but they possess properties unique from bulk graphene due to the quantum confinement and edge effects. As an emerging material, GQDs presents a new open field for broad investigations, from synthesis, explanation of properties to promising applications including sensing, bio-imaging, nanomedicine (e. g. drug delivery), energy conversion (e. g. photovoltaic devices and photocatalyst) optoelectronics, spintronics etc. This PhD project is dedicated to three correlated aspects of GQDs: 1) development of new methods for synthesis of GQDs; 2) mechanistic studies of the photoluminescence (PL) possessed by GQDs, and; 3) the applications of GQDs in sensing and light harvesting.
Thesis (PhD Doctorate)
Doctor of Philosophy (PhD)
Griffith School of Engineering
Science, Environment, Engineering and Technology
Full Text
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Graphene - Photovoltaics"

1

Materials for Solar Cell Technologies I. Materials Research Forum LLC, 2021. http://dx.doi.org/10.21741/9781644901090.

Texte intégral
Résumé :
The book reviews recent research and new trends in the area of solar cell materials. Topics include fabrication methods, solar cell design, energy efficiency and commercialization of next-generation materials. Special focus is placed on graphene and carbon nanomaterials, graphene in dye-sensitized solar cells, perovskite solar cells and organic photovoltaic cells, as well as on transparent conducting electrode (TCE) materials, hollow nanostructured photoelectrodes, monocrystalline silicon solar cells (MSSC) and BHJ organic solar cells. Also discussed is the use of graphene, sulfides, and metal nanoparticle-based absorber materials.
Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Graphene - Photovoltaics"

1

Pareek, Alka, et Sreekanth Mandati. « 3D Graphene for Photovoltaics ». Dans Carbon Nanostructures, 305–20. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-36249-1_17.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Arfin, Tanvir, et Shoeb Athar. « Graphene for Advanced Organic Photovoltaics ». Dans Nanomaterials : Biomedical, Environmental, and Engineering Applications, 93–103. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119370383.ch3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Kumar, Pankaj. « Carbon Nanotubes and Graphene in Photovoltaics ». Dans Emerging Applications of Carbon Nanotubes and Graphene, 131–59. Boca Raton : CRC Press, 2023. http://dx.doi.org/10.1201/9781003231943-7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Lee, Seung J., et A. Rashid bin Mohd Yusoff. « Graphene and Its Derivatives for Highly Efficient Organic Photovoltaics ». Dans Graphene-based Energy Devices, 379–406. Weinheim, Germany : Wiley-VCH Verlag GmbH & Co. KGaA, 2015. http://dx.doi.org/10.1002/9783527690312.ch15.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Rai, Sadhna, Rabina Bhujel, Joydeep Biswas et Bibhu P. Swain. « Silicon Nanowires/Graphene Oxide Heterojunction for Photovoltaics Application ». Dans Energy Materials, 185–206. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3866-7_8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Mazher, Javed, Asefa A. Desta et Shabina Khan. « PAn-Graphene-Nanoribbon Composite Materials for Organic Photovoltaics : A DFT Study of Their Electronic and Charge Transport Properties ». Dans Solar Cell Nanotechnology, 357–407. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118845721.ch14.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Buzatu, Doru, Marius Mirica et Mihai Putz. « Semiconductor Graphenes for Photovoltaics ». Dans Springer Proceedings in Energy, 348–63. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-63215-5_25.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Barpuzary, Dipankar, et Mohammad Qureshi. « Graphene Filled Polymers in Photovoltaic ». Dans Graphene-Based Polymer Nanocomposites in Electronics, 157–91. Cham : Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-13875-6_7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Amollo, Tabitha A., et Vincent O. Nyamori. « Photovoltaic Application of Graphene Oxide and Reduced Graphene Oxide ». Dans 2D Nanomaterials, 263–78. Boca Raton : CRC Press, 2022. http://dx.doi.org/10.1201/9781003178453-15.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Nongthombam, Sumitra, et Bibhu Prasad Swain. « Nanowires/Graphene Nanocomposites for Photovoltaic Applications ». Dans Materials Horizons : From Nature to Nanomaterials, 131–42. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8307-0_7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Graphene - Photovoltaics"

1

Khatami, Yasin, Wei Liu, Jiahao Kang et Kaustav Banerjee. « Prospects of graphene electrodes in photovoltaics ». Dans SPIE Solar Energy + Technology, sous la direction de Oleg V. Sulima et Gavin Conibeer. SPIE, 2013. http://dx.doi.org/10.1117/12.2026581.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Ferrari, A. C. « Graphene Interaction with Light ». Dans Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C. : OSA, 2012. http://dx.doi.org/10.1364/pv.2012.pt4c.1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Conlon, Benjamin P., Daniel J. Herrera, Shaimaa A. Abdallah, Jonathan O. Okafor et Luke F. Lester. « Performance of GaSb Photovoltaics with Graphene Coating ». Dans 2017 IEEE 44th Photovoltaic Specialists Conference (PVSC). IEEE, 2017. http://dx.doi.org/10.1109/pvsc.2017.8366632.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Jia, Baohua, Yinan Zhang, Xiaorui Zheng et Min Gu. « Graphene Oxide as Antireflection Coating for Silicon Solar Cells ». Dans Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C. : OSA, 2014. http://dx.doi.org/10.1364/pv.2014.pw2b.2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Yao, Gang, Furi Ling, Jin Yue, Chunya Luo et Jianquan Yao. « Resonant plasmonic perfect absorption in complementary periodic graphene arrays ». Dans Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C. : OSA, 2015. http://dx.doi.org/10.1364/pv.2015.jtu5a.10.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Acik, Muge, Subramanian Sankaranarayanan et Richard A. Rosenberg. « Role of halide anions in perovskite/graphene oxide photovoltaics ». Dans 2017 IEEE 17th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2017. http://dx.doi.org/10.1109/nano.2017.8117400.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Ding, Ke, Qing Zhang, Liu Wang, Kaiqun Ruan, Chao Xie, Xiaozheng Zhang et Jiansheng Jie. « The Application of Graphene and other 2D materials in Photovoltaics and Photodetectors ». Dans Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C. : OSA, 2015. http://dx.doi.org/10.1364/pv.2015.jtu5a.12.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Tchoe, Youngbin, Jun Beom Park, Janghyun Jo, Heehun Kim, Joon Young Park, Kunook Chung, Yooleemi Shin, Sunglae Cho, Miyoung Kim et Gyu-Chul Yi. « InAs nanorods/graphene layers/ZnO nanorods heterostructures for broadband solar cell applications ». Dans Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C. : OSA, 2017. http://dx.doi.org/10.1364/pv.2017.jw4c.1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Aziz, T. H. T., M. M. Salleh, A. A. Umar et M. Y. A. Rahman. « OLED enhancement by insertion of graphene oxide spider like nanostructure as hole buffer layer ». Dans Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C. : OSA, 2015. http://dx.doi.org/10.1364/pv.2015.jtu5a.5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Chen, Wenjun, Seungbae Ahn, Chiara Ingrosso, Annamaria Panniello, Marinella Striccoli, Giuseppe V. Bianco, Angela Agostiano, Giovanni Bruno, Lucia Curri et Oscar Vazquez. « Record 1-micron thick QD film photodetectors using intercalated graphene electrodes for high responsivity in the infrared ». Dans Organic, Hybrid, and Perovskite Photovoltaics XXI, sous la direction de Kwanghee Lee, Zakya H. Kafafi, Paul A. Lane, Harald W. Ade et Yueh-Lin (Lynn) Loo. SPIE, 2020. http://dx.doi.org/10.1117/12.2569809.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Graphene - Photovoltaics » pour d’autres types de sources :
Articles de revues Thèses
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie