Se connecter

Bibliographies thématiques / Fur industry

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Fur industry »

Auteur : Grafiati

Publié le 10 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Fur industry ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Fur industry"

1

Guay, Danielle, et Jack Siemiatycki. « Historic cohort study in montreal's fur industry ». American Journal of Industrial Medicine 12, n^o 2 (1987) : 181–93. http://dx.doi.org/10.1002/ajim.4700120207.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Myers, Heather. « From fur to fir : Lessons for the BC forest industry from the anti-fur campaign ». Forestry Chronicle 77, n^o 1 (1 février 2001) : 77–84. http://dx.doi.org/10.5558/tfc77077-1.

Texte intégral

Résumé :

BC's forest industry is feeling internal and international pressure to change its practices, and there is an increasing move to certification, amidst debates about preferred certification modes. This reflects changes in the economies of many of Canada's rural and northern communities, which have traditionally been dependent upon natural resources, but are now coming under pressure from the global community – not only in economic terms, but in terms of social values. As demography changes, and with it, social and economic values, this pressure is likely to continue. The Canadian North first felt such pressure as a result of the European boycott of the Newfoundland seal hunt, and then anti-trapping boycotts that have occurred periodically since then. These campaigns have had a profound effect on the lifestyles, cultures and sustainability of the northern communities. Over almost three decades, the government, non-government organizations and people of the North have had to learn to deal with and respond to these external campaigns that threaten them. The lessons they have learned about the nature of these campaigns could be useful to the province of British Columbia, which is now coming under increasing pressure from Europe and the US regarding its forestry practices. This paper outlines the evolution and characteristics of the international campaigns against sealing and trapping, as well as the experiences of northerners in dealing with them. It goes on to apply these lessons to the BC situation, with some recommendations for appropriate responses. Fundamentally, these campaigns reflect changing demographic and social characteristics and values in North America and Europe, and the changing relationship of people to natural resources, but they also raise questions about fair reflection of the variety of stakeholder interests in resource decision-making, and the limits on definition of "stakeholders." Key words: Boycotts, resource use

Styles APA, Harvard, Vancouver, ISO, etc.

3

Semos, Nikolaos, Dotas Vasilios et Bampidis Vasilios. « Development Strategies for the Fur Farming Industry in Greece ». Open Journal of Business and Management 09, n^o 06 (2021) : 2683–96. http://dx.doi.org/10.4236/ojbm.2021.96148.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Semos, Nikolaos, Vasilios Dotas et Stamatis Aggelopoulos. « FACTORS THAT SUPPORT THE DEVELOPMENT OF FUR FARMS : THE CASE STUDY OF GREECE ». Journal of Experimental Biology and Agricultural Sciences 9, n^o 6 (30 décembre 2021) : 894–900. http://dx.doi.org/10.18006/2021.9(6).894.900.

Texte intégral

Résumé :

This study aims to discuss the key factors that can contribute to the development of the fur industry in Greece. The industry consists of two sub-sectors i.e. production and processing of fur skins (raw material), and the production of fur garments. The profitability of fur-bearing farms, considered from the perspective of investment and further international fur trade, and both these were examined in this study because these two sub-sectors are closely linked. The results obtained from the analysis of the two fur production sub-sectors showed that the investment of capital in the industry can expect positive returns while at the same time creating well-paid jobs. Although not presenting a comparative advantage, but the foreign trade of fur garments produced in the region can gain competitiveness if some of the strategies used by Greek fur companies are adjusted. Results of the current study can be concluded that despite the weaknesses that emerge from the results of this study, both sub-sectors of the fur industry can make a significant contribution to the development of the local community of Western Macedonia.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Gutbrod, Matthias. « Problemloser fur die Kautschukindustrie / Probblem Solvers for the Robber Industry ». Applied Rheology 6, n^o 1 (1 février 1996) : 32–34. http://dx.doi.org/10.2478/arh-1996-060111.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Lukyanova, A. V. « MODEL OF OBTAINING KEY COMPETITIVE ADVANTAGES THE COMPANIES OF THE FUR AND FUR INDUSTRY IN THE RUSSIAN MARKET ». Business Strategies, n^o 4 (23 mai 2018) : 27–43. http://dx.doi.org/10.17747/2311-7184-2018-4-27-43.

Texte intégral

Résumé :

The market of products from natural fur and skin takes a special place in the Russian market of clothes, first of all it is connected with that fact that this production is one of the most expensive of all type of goods of light industry, and also in connection with severe climatic conditions of the Russian Federation demand for products from natural fur and skin is high during an autumn and winter season. In article an attempt to analyse competitive strategy of players of the market pushno – the fur industry is made. Conclusions became results of research that for the companies of the fur and fur industry a key role play: 1) The known brand which causes positive associations in the client and installs confidence in the quality, offered production; 2) The wide model range offered on a choice of the client; 3) The qualified personnel which not only adjusts the consumer on purchase, but also can answer all questions concerning quality of production, the cut, actual trends, ruled socks, cleanings, storages, etc.; 4) Planning and registration of trade space (window dressing and effective zoning of space of shop).

Styles APA, Harvard, Vancouver, ISO, etc.

7

Lukyanova, A. V. « Model of obtaining key competitive advantages the companies of the fur and fur industry in the Russian market ». Business Strategies, n^o 6 (10 juillet 2018) : 03–19. http://dx.doi.org/10.17747/2311-7184-2018-6-03-19.

Texte intégral

Résumé :

The market of products from natural fur and skin takes a special place in the Russian market of clothes, first of all it is connected with that fact that this production is one of the most expensive of all type of goods of light industry, and also in connection with severe climatic conditions of the Russian Federation demand for products from natural fur and skin is high during an autumn and winter season. In article an attempt to analyse competitive strategy of players of the market pushno – the fur industry is made. Conclusions became results of research that for the companies of the fur and fur industry a key role play: 1) The known brand which causes positive associations in the client and installs confidence in the quality, offered production; 2) The wide model range offered on a choice of the client; 3) The qualified personnel which not only adjusts the consumer on purchase, but also can answer all questions concerning quality of production, the cut, actual trends, ruled socks, cleanings, storages, etc.; 4) Planning and registration of trade space (window dressing and effective zoning of space of shop).

Styles APA, Harvard, Vancouver, ISO, etc.

8

Akramova, Fazilat. « HISTORY OF WOMEN'S ACTIVITIES IN LIGHT INDUSTRY OF UZBEKISTAN ». CURRENT RESEARCH JOURNAL OF HISTORY 02, n^o 06 (19 juin 2021) : 30–33. http://dx.doi.org/10.37547/history-crjh-02-06-07.

Texte intégral

Résumé :

This article provides a detailed overview of the role and importance of women's participation in the light industry of Uzbekistan. The history of human society is unthinkable without light industry. With the development of a person, his needs grew, and in particular his needs for clothes, shoes, fabrics. The textile, sewing, leather and fur and footwear industries developed. The impetus for industrialization and the development of capitalism was the development of textile production.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Brinia, Vasiliki, et Harilaos Vanidis. « Detection of Training Needs of Workers in the Fur Industry : The case of Macedonia Greece ». Journal of Education and Training 5, n^o 2 (18 avril 2018) : 1. http://dx.doi.org/10.5296/jet.v5i2.13021.

Texte intégral

Résumé :

The paper investigates the training needs of workers in the fur industry and suggests the design of a respective training program. Based on the views of the workers themselves, the paper detects the theoretical knowledge and the practical skills necessary for their employment in this field as well as it identifies training gaps. In order to gain access to a big sample, the region of Macedonia, Greece was chosen as the place at which the field research took place, as it presents the highest numbers in fur production in the country. Qualitative field research, through semi-structured interviews, has been conducted. The main findings of the survey showed that there is no training support for the fur industry in Greece, both at the level of initial education and at the level of continuous training of the employees in it. The workers’ participation in a specialized training program will contribute to the upgrading of the industry, according to the workers’ views.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Boghossian, Johnny, et Jose Carlos Marques. « Virtue Transfer : Shedding Core-Stigma in the Canadian Wild Fur Industry ». Academy of Management Proceedings 2020, n^o 1 (août 2020) : 21695. http://dx.doi.org/10.5465/ambpp.2020.297.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Fur industry"

1

Hui, Choi Shuk-may Connie. « A study of the Hong Kong fur clothing industry with emphasis on export marketing analysis / ». [Hong Kong : University of Hong Kong], 1986. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12323974.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Stewardson, Carolyn Louise. « Biology and conservation of the Cape (South African) fur seal Arctocephalus pusillus pusillus (Pinnipedia:Otariidae) from the Eastern Cape coast of South Africa ». Connect to this title online, 2001. http://thesis.anu.edu.au/public/adt-ANU20030124.162757/.

Texte intégral

Résumé :

Thesis (Ph. D.)--Australian National University, 2001.
Title from PDF title page (viewed May 8, 2005). Consists of reprints of thirteen published papers, some co-authored with others, plus an introductory chapter, two unpublished manuscripts, and a conclusion. Includes bibliographical references.

Styles APA, Harvard, Vancouver, ISO, etc.

3

Hui, Choi Shuk-may Connie, et 許蔡淑美. « A study of the Hong Kong fur clothing industry with emphasis on exportmarketing analysis ». Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1986. http://hub.hku.hk/bib/B31263598.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Dimitriadis, Nikolaos I. « Information flow in industrial districts : the case of Kastoria's fur industry ». Thesis, University of Sheffield, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.425612.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Boscareno, Jared. « The Rise and Fall of the Louisiana Muskrat, 1890-1960 : An Environmental and Social History ». ScholarWorks@UNO, 2009. http://scholarworks.uno.edu/td/992.

Texte intégral

Résumé :

As the nineteenth century drew to a close, people living in coastal Louisiana noticed that local rodents called muskrats were rapidly increasing and quickly becoming pests by digging up crops and into levees. Property owners soon demanded their elimination, but to the ire of many, Louisiana officials chose to develop a market for muskrat fur and protect its supply through management laws. The state sought the cooperation of trappers in order to maintain global demand, but when nutria were released alongside the muskrat, the ecological balance of the marsh was permanently altered. Muskrats shrank back into obscurity, and trappers struggled to embrace the nutria as a substitute. This thesis will trace the Louisiana muskrat industry's development starting with its rise in the 1890s, continuing through its years as a leading furbearer, and ending with its replacement by the nutria in the 1960s.

Styles APA, Harvard, Vancouver, ISO, etc.

6

Yonekura, Seiichirō. « The Japanese iron and steel industry, 1850-1990 : continuity and discontinuity / ». Basingstoke : New York : MacMillan ; St. Martin's press, 1995. http://catalogue.bnf.fr/ark:/12148/cb37477905c.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Wu, Kailiang. « Modeling the semiconductor industry dynamics ». Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/45280.

Texte intégral

Résumé :

Thesis (S.M.)--Massachusetts Institute of Technology, Computation for Design and Optimization Program, 2008.
Includes bibliographical references (p. 89-92).
The semiconductor industry is an exciting and challenging industry. Strong demand at the application end, plus the high capital intensity and rapid technological innovation in manufacturing, makes it difficult to manage supply chain planning and investment in technology transitions. Better understanding the essence of the industry dynamics will help firms win competitive advantages in this turbulent market. In this thesis, we will study semiconductor industry dynamics from three different angles: quantitative modeling, industry dynamics simulation, and strategic analysis. First, we develop a stochastic linear optimization model to address the supplier's "order fulfillment dilemma" suggested by previous empirical studies. The model provides optimal equipment production decisions that minimize the total cost under stochastic demand. To solve the large scale problem, we introduce the Bender's Decomposition, which is proven to outperform the pure Simplex method. Furthermore, we extend the basic model to multiple periods, allowing equipment inventory planning over a period of time. Second, we build a macro-level industry dynamic model using the methodology of System Dynamics. The model includes components of electronics demand projection, fabrication capacity allocation, fabrication cost structure, technology roadmapping as well as equipment production and R&D. The model generates projections of demand , industry productivity, schedule of building new fabrication, adoption of the latest process technology, etc., which are validated by actual industry data. In addition, we devise a control panel in the software that enables the users to implement flexible scenario and sensitivity analysis. Third, we propose a strategic framework for companies to pinpoint the root causes of the supply-demand mismatch problem.
(cont.) This framework considers long lead times, fast clockspeeds, Moore's Law, and risky product and technology, which transitions contribute to the pronounced volatility amplification occurring in the semiconductor industry. This framework, along with several industry successful practices, will assist companies to mitigate the demand volatility and improve their supply chain performance.
by Kailiang Wu.
S.M.

Styles APA, Harvard, Vancouver, ISO, etc.

8

Mao, Juan. « Sustainable development for the logistics industry in the UK ». Thesis, University of Westminster, 2012. https://westminsterresearch.westminster.ac.uk/item/8z590/sustainable-development-for-the-logistics-industry-in-the-uk.

Texte intégral

Résumé :

At a time when environmental mitigation is firmly at the centre of the agenda for sustainable development, there is no shortage of research in the field of green logistics. However, little has been done in an attempt to provide integrated solutions for industry, based on a practical assessment of the interrelationships between specific measures. This research investigates the current status of the British logistics industry in terms of its environmental sustainability, by examining 14 sustainable measures that feature strongly in contemporary logistics practice and policies, and determines the interrelationships among them. The primary data was collected using a combined approach involving a postal questionnaire survey and in-depth company interviews. The survey covered both logistics services providers (LSPs) and logistics service users (LSUs), together with the targeted inclusion of more specific actors within the logistics industry. Through analysis of the sustainable practice and implementation process as seen in the experiences and judgments of key actors in the logistics industry, it is shown that the role of the actors as either logistics providers or users has a certain impact on their perceptions of, and behaviours in, sustainable logistics. Particular characteristics of the company and the sector it belongs to also exert influence, to various extents, on its response to sustainability. The findings also highlight cost-effectiveness as another critical factor determining companies’ sustainability policies. On the basis of the assessment of the measures, in particular their effectiveness and cost efficiency, the thesis concludes with proposals for sustainable packages constructed from different perspectives, along with suggestions for their implementation. This evidence-based research thus informs policy-makers of appropriate and viable sustainable strategies with the right incentives in various circumstances, and the potential to bring about tangible improvements in environmental performance.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Samson, Roch. « Les Forges du Saint-Maurice, les débuts de l'industrie sidérurgique au Canada, 1730-1883 ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape9/PQDD_0003/NQ39394.pdf.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Lindahl, Amanda. « Industry 4.0 as a Tool for Improvement in a Global FoodSupply-Chain : A Study on how Industry 4.0 can be Implemented in a Global Bakery Group ». Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264426.

Texte intégral

Résumé :

Industry 4.0 is at the moment one of the most talked-about topics amongst industry companies. Management teams of discuss the area as something they want to implement, but since it is an ongoing industrial revolution it cannot be implemented straight away. This study is looking into the subject of Industry 4.0 and the identification of nine different technology drivers that a manufacturing company can use as tools in a production environment. However, what is less known is how the tools can be applied to a global company and its different cultures. Because even though Industry 4.0 is about decentralization and giving responsibility to every co-worker, they need to work with a common framework, thus standardization. A company that has started to look into Industry 4.0 is Lantmännen Unibake, who is a global bakery group. Therefore, they serve as the case company in this exploratory study where the goal is to conduct a pre-study that gives them, and the food industry, information and guidelines on how Industry 4.0 applies to their industry. Hence, what improvements it can lead to, what tools that will be suitable, and what the prerequisites for a successful Industry 4.0- transformation will be. The method to answer the research question starts with conducting a comprehensive literature study, followed by several interviews around Europe, and ending in an analysis of the current state with help from the literature framework. The analysis has ended in a conclusion that there is no single or easy answer to the questions since food industries might vary a lot from one to another. Although, in this case, the answer would be that six out of nine tools would be applicable in a global food-supply-chain, some needing more preparatory work than others. By implementing these tools, companies will see more engaged employees that are prone to take autonomous decisions, more accurate production planning, proactive rather than reactive working ways, fewer defects, and higher customer satisfaction. Regarding the prerequisites for transformation, the answer depends on what tools that are used. But what all cases have in common is that there is a need for aware and engaged employees. Everyone will have to be in on the change, understanding why and how, and what benefits that will come out of it. For future studies, it is suggested to look into how maturity models can be applied to these kinds of issues smoothly. The existing maturity models for Industry 4.0 are very complicated and difficult to apply; thus, they would need some development. Another area would be a cost model of the different tools, as well as a comparison of the tools and food regulations.
I dagens läge är Industri 4.0 ett av de hetaste ämnena bland industriföretag. Ett problem är att det ofta diskuteras som något som bör implementeras vilket skapar en felaktig bild av vad Industri 4.0 är, en pågående industriell revolution. Denna studie undersöker ämnet Industri 4.0 och identifierar nio verktyg som kan användas som teknologiska drivkrafter i en tillverkningsmiljö. Då dagens forskning är i sin linda finns det begränsat med information om hur dessa verktyg kan anpassas till att fungera i en global miljö med flera olika kulturer. Även om Industri 4.0 till stor del handlar om decentralisering och att ge ökat ansvar till alla medarbetare så kräver den nya typen av industri också standardisering och att ett företag har ett gemensamt ramverk. Lantmännen Unibake är ett företag som har börjat undersöka möjligheterna med Industri 4.0. Lantmännen Unibake är en av Europas ledande bagerigrupper och agerar som case-företag i denna utforskande studien. Syftet är att sammanställa en förstudie om hur Lantmännen Unibake och livsmedelsindustrin kan utnyttja Industri 4.0:s potentialer, det vill säga vilka förbättringar det kan leda till, vilka verktyg som är applicerbara på industrin och vilka förutsättningar som krävs för en lyckad transformation. För att svara på dessa frågor har en omfattande litteraturstudie och flertalet intervjuer genomförts runt om i Europa. Med hjälp av nulägesanalysen och litteraturstudien har slutsatsen blivit att det varken finns ett ensidigt eller enkelt svar på frågorna då livsmedelsindustri skiljer sig väldigt från företag till företag. I detta fall har sex av nio verktyg identifierats som användbara för en global livsmedelsvärdekedja, dock kräver somliga verktyg mer förberedelser än andra. Genom att implementera dessa verktyg kan företaget komma att se motiverad personal som är mer benägna att ta autonoma och snabba beslut, mer tillförlitlig produktionsplanering, ett proaktivt snarare än reaktivt arbetssätt, minskad mängd defekter och högre kundnytta. Förutsättningar för en förändring beror på vilka verktyg som väljs, dock kräver alla att personalen är medveten om förändringen. Både varför den behöver göras, hur det kommer gå till och vad för fördelar det kommer leda till. Förslag för framtida studier är att se över hur en mognadsanalys kan appliceras på denna typ av situation då de modeller som existerar inom området i dagsläget är väldigt komplicerade och därför svåra att applicera på gemene företag. Ett annat område är en kostnadsanalys för de olika verktygen, likväl en jämförelse mellan verktygen och huruvida de uppfyller livsmedelsreglerna.

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Livres sur le sujet "Fur industry"

1

Branch, Manitoba Wildlife. A Heritage sustained : Manitoba's wild fur industry. [Winnipeg] : Manitoba Natural Resources, Wildlife, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Fur Information Council of America., dir. A guide to the fur industry : Fact vs. fiction. [Washington, DC] (655 15th St., NW, Suite 320, Washington 20005) : The Council, 1993.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Hunter, Andrew. Some problems of the fox-raising industry. Ottawa : Published by authority of the Sub-Committee of the Privy Council for Scientific and Industrial Research, 1997.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Gum, Russell. Economic value of the fur trapping industry in Oregon. Corvallis, Or : Agricultural Experiment Station, Oregon State University, 1987.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Sun, Zuomin. Pi cao ren sheng : Sun Zuomin zi zhuan. Beijing : Zhong yang bian yi chu ban she, 2012.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Jin dai Gan Ning Qing pi mao mao yi yu xu mu jing ji kai fa yan jiu : Jindai Gan Ning Qing pimao maoyi yu xumu jingji kaifa yanjiu. Yinchuan Shi : Ningxia ren min chu ban she, 2010.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

United States International Trade Commission. In the matter of certain feathered fur coats and pelts, and process for the manufacture therof : Investigation no. 337-TA-260. Washington, DC : U.S. International Trade Commission, 1988.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

In the matter of certain feathered fur coats and pelts, and process for the manufacture therof : Investigation no. 337-TA-260. Washington, DC : U.S. International Trade Commission, 1988.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Liebgott, Dorion. A common thread : A history of Toronto's garment industry. Sous la direction de Beth Tzedec Museum. [Toronto] : Beth Tzedec Reuben & Helene Dennis Museum, 2003.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Chicago business and industry : From fur trade to e-commerce. Chicago : The University of Chicago Press, 2013.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Chapitres de livres sur le sujet "Fur industry"

1

Uitti, Jukka. « Fur Farming and the Fur Industry ». Dans Kanerva’s Occupational Dermatology, 1–5. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-40221-5_155-2.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Uitti, J. « Fur Farming and the Fur Industry ». Dans Handbook of Occupational Dermatology, 947–49. Berlin, Heidelberg : Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-662-07677-4_135.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Uitti, Jukka. « Fur Farming and the Fur Industry ». Dans Kanerva’s Occupational Dermatology, 1991–95. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-68617-2_155.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Uitti, Jukka. « Fur Farming and the Fur Industry ». Dans Kanerva's Occupational Dermatology, 1479–82. Berlin, Heidelberg : Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-02035-3_155.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Wong, Thomas C. C., Roger Ng et Lei Min Cai. « Sustainability in the Fur Industry ». Dans Sustainability in Luxury Fashion Business, 133–52. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8878-0_8.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Stone, Peter Allen. « Industry Interviews ». Dans Acting for the Camera, 121–47. New York, NY : Routledge, 2021. : Routledge, 2021. http://dx.doi.org/10.4324/9781003048671-25.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Miraz, Mahadi Hasan, Mohammad Tariq Hasan, Farhana Rahman Sumi, Shumi Sarkar et Mohammad Amzad Hossain. « Industry 5.0 ». Dans Machine Vision for Industry 4.0, 285–300. Boca Raton : CRC Press, 2022. http://dx.doi.org/10.1201/9781003122401-14.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Hazzan, Orit, et Ronit Lis-Hacohen. « Industry : Management ». Dans The MERge Model for Business Development, 23–28. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-30225-6_6.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Hazzan, Orit, et Ronit Lis-Hacohen. « Industry : Education ». Dans The MERge Model for Business Development, 29–33. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-30225-6_7.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Hazzan, Orit, et Ronit Lis-Hacohen. « Industry : Research ». Dans The MERge Model for Business Development, 35–39. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-30225-6_8.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Fur industry"

1

Radnaeva, Vera, Dmitry Shalbuev, Nikolay Sovetkin, Khurelsukh Gaanbaatar, Solongo Khosbayar, Suvda Dashdorj et Victoriy Alekhina. « Horse paws as raw material for fur industry ». Dans The 8th International Conference on Advanced Materials and Systems. INCDTP - Leather and Footwear Research Institute (ICPI), Bucharest, Romania, 2020. http://dx.doi.org/10.24264/icams-2020.iii.14.

Texte intégral

Résumé :

Horse skin is used for processing various types of skin. However, paws of horse skin are not used as fur raw material. Usually they are burned or sent to landfills and may cause infectious diseases. It is possible to minimize negative impact on the environment by converting this waste into fur raw material. In cold regions of Russia high fur boots made of cattle and deer paws are very popular. The aim of the research is to study the possibility of using paws of horse skin as raw material for fur industry. Processing of horse paws based on well-known leather and fur processing technologies lead to semi-finished product characterized by increased stiffness and uneven properties on different skin parts. Such semi-finished product was not suitable for high fur boots manufacture. The aim of the research is to work out a new technology and study chemical and physico-mechanical properties. In the work various treatment options for horse paws and their properties are investigated: moisture content, amount of minerals and chromium oxide, pH of the aqueous extract, tensile strength, elongation at a voltage of 10 MPa, and stiffness are determined. The possibility of transferring horse paws from municipal solid waste into fur raw material is shown.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Lønne, Irene Alma, et Else Skjold. « Design as Driver for Understanding Sustainability and Creating Value in the Fur Industry ». Dans Design Research Society Conference 2016. Design Research Society, 2016. http://dx.doi.org/10.21606/drs.2016.318.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

SIMION, Demetra, Carmen GAIDĂU, Corina CHIRILĂ, Mariana Daniela BERECHET, Mihaela NICULESCU et Doru Gabriel EPURE. « New Structured Emulsions Based on Renewable Resources Generated by Leather and Fur Industry, with Application in Agriculture ». Dans The 7th International Conference on Advanced Materials and Systems. INCDTP - Leather and Footwear Research Institute (ICPI), Bucharest, Romania, 2018. http://dx.doi.org/10.24264/icams-2018.ii.5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Yurkov, Victor, Elena Dolgova et Margarita Chizhik. « Predictive Geometric Models for Heat-Insulation Properties of Semi-Finished Fur and Down Products ». Dans 31th International Conference on Computer Graphics and Vision. Keldysh Institute of Applied Mathematics, 2021. http://dx.doi.org/10.20948/graphicon-2021-3027-713-719.

Texte intégral

Résumé :

This paper is devoted to geometric simulation of heat-insulation properties of fur and down products which are considered as multi-parameter and multi-component systems. We consider predictive models of heat resistance depended on physical characteristics of fur and pelt. There is a problem of construction co-ordinate geometric models on condition that the set of experimental data is limited. We solve the problem as a problem for static multi-component systems. The model is considered as a piecewise constant function in the space of input and output parameters. The paper proposes an algorithm of construction the clusters on the set of given experimental points. Moreover, we construct multidimensional convex covering on the set of the points. The covering is based on its two-dimensional projections. Results of the investigations allow us to substantiate producer’s choice of fur and down semi-finished products and its composition for manufacturing the product of special purpose. The method suggested in the paper may be one of geometric modulus of the software HYPER-DESCENT which has been developed formerly. Our geometric models together with software HYPER- DESCENT may be applied for simulation and prediction the properties of another multi- parametrical systems or technological processes of light industry.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Cieślik, Ewa. « THE CENTRAL AND EASTERN EUROPEAN ECONOMIES IN THE ERA OF INDUSTRY 4.0 AND CHINESE DIGITAL SILK ROAD ». Dans Economic and Business Trends Shaping the Future. Ss Cyril and Methodius University, Faculty of Economics-Skopje, 2022. http://dx.doi.org/10.47063/ebtsf.2022.0018.

Texte intégral

Résumé :

Over the recent decades, the changes in the paradigm of international trade have been observed. As the result of decreasing of trade barriers as well as the reduction in trade costs allowed companies to divide their production into stages and to locate it in different countries according to their competitive advantage. Eventually, the production process has become more fragmented, both geographically and vertically. It means that intermediate products are shipped across boarders many times and every exporting economy provides some value added according to its competitive advantage. As a result, global value chains have become one of the most important feature of international trade. Following (Gereffi & Fernandez-Stark, 2011), in this study global value chains are defined as “the full range of activities that firms and workers do to bring a product from its conception to its end use”. Humphrey and Schmitz (2002) pointed out four types of upgrading in global value chains: product, process, functional and chain. Product and process upgrading involve companies retaining their positions in global value chains by enhancing productivity gains through adopting new product processes or “new configurations of product mix”. Thus, functional upgrading involves a slicing up the global value chains into new activity which generates higher value added, e.g. own brand manufacturing. In turn, chain upgrading involves a going up to new activity, which needs higher skills and capital and value added. Milberg and Winkler (2013) offered similar classifications of upgrading. Production fragmentation has caused a rapid increase in trade in intermediate goods as often companies offshore an intermediate stage of production process. Offshoring production has been typical to manufacturing (Timmer, et al., 2012), however, services have been often overlooked, but play a major role, especially in supporting global value chains (Kommerskollegium 2013). In turn, Digital Silk Road, announced in 2015, has become a significant part of Chinese Belt and Road Initiative strategy. China has implemented this strategy as a part of its long-term technological plan, under which China provides support to its exporters, including many well-known technology companies and builds a network of cooperation with selected countries in the field of technology, including ICT infrastructure, services, 5G networks, e-commerce, etc. China's rapid technological changes must not go unnoticed by trading partners, including analysed European countries, which, to maintain international competitiveness, are increasing the technological advancement and enhancing market protection against Chinese technology. Until recently, the value added from China to European countries was concentrated mainly on medium technology industries and value added from Europe to China focused more on advanced goods and services. Nowadays, there is a redirection of Chinese value added to high-tech activities (including service activities), which reflects China's ambition to build an economy that leads to innovation and industry 4.0. The transition of the CEE states’ economic and political systems initiated in the early 1990s, earned them the EU membership in 2004. The accession to the EU’s structures meant that these countries achieved the free-market economy status and they should be treated as the full member of the global business networks. Moreover, the decline in trade costs (transport and transaction), greater openness of their market and the removal of trade barriers have all helped the CEE states to join global value chains. Hence, the CEE economies are going to be more heavily involved in global production linkages. Many empirical studies have presented the close and dynamic integration of these countries with the EU market (especially the EU-15) and in a more limited scope with the whole global economy as well (Behar and Freund 2011). Generally, democratisation, the strengthening of political and economic relations (particularly with the EU), and the modernisation of many sectors (including financial sector, more advanced industries), were common elements of the CEE countries long-term development policies. One of their priorities was the redirection of foreign trade towards the EU and joining the global production linkages where China has become the core producer. Recently, the role of the economy in global value chains is more determined by the advancement of value added that it offers. Companies move toward services and innovations in the business model (Nenenen & Storbacka, 2010) and introduce industry 4.0 (Bundesministerium fur Bildung und Forschung, 2016). A symptom of these novelty is a concept of servicification of manufacturing (Neely et al. 2011) and cross-sectoral connections, which have reconstructed traditional global value chains (Naude et al. 2019) and, together with Industry 4.0, is expected to change the landscape of global manufacturing. As a result of facilitation of manufacturing, economies placed in the downstream market can improve their role in global value chains. In Europe, this can be an opportunity for most Central and Eastern European countries. Analyzing changes in CEE’s role in technological global value chains, we should take into account its two most important value-added suppliers: China and Germany, as well as their most important value-added buyer - Germany. These three economies established a sort of value added flows triangle. The regional supply chains built by Germany in the CEE allowed it to maintain a comparative advantage in sectors important for the economy, while helping the CEE countries join global value chains, positively influencing economic growth, but also reducing them to entities operating in less advanced stages of production (Jacoby, 2010; Fortwengel, 2011). Today, Germany also cooperates strongly with China (as a result of Digital Silk Road), and the CEE economies (especially the Visegrad Group) are increasingly dependent on Chinese value added, still linked to German value added. The most visible connections can be found in automotive and electronics. Hence, the question is: how strong are these links in servicification of manufacturing and whether there are visible trends in value-added flows in between this triangle in the era of industry 4.0 and Chinese Digital Silk Road. The research question seems to be relevant, thus in the subject literature, little is known about the mentioned relations (Roland Berger, 2021). The research method based on the analysis of data from the OECD Trade in Value Added databases, containing the world input-output tables for the period 2005–2018. The system of balance equations in the input-output model for one economy has been adopted to a multi-economy model. The model is described in more detail in (Koopman et al. 2013 or Hummels et al, 2001) and is based on the decomposition of gross exports. The method includes not only estimates of total value added in global value chains, but also calculations at both the mezoeconomic level and cross-sectoral flows of value added (including servicification of manufacturing). The results of analysis showed that most relations between economies continued to deepen the imbalance in flows of value added. The CEE economies are making their manufacturing increasingly dependent on advanced services (both from Germany and China). On the other hand, the share of CEE services to Chinese and German manufacturing is decreasing or remains steady. However, some trends could be observed in the last years, especially between Germany and China. German manufacturing is starting to rely more on Chinese value added (information and communication technologies services and the subgroup computer programming, consultancy and information services activities in manufacturing, information and communication technologies services' value added in transport equipment), although previously Germany provided more of these services to China. In telecommunications in manufacturing between CEE and Germany, the trend has turned against CEE. However, there was no direct compensation between pairs of economies, but the decrease in German value-added flows to China resulted in a much larger increase in value-added from China in German manufacturing. If the presented changes in flows were to reflect the effectiveness of Chinese industry 4.0 and Digital Silk Road. These strategies serve their purposes and increases not only the advancement of Chinese value-added exports, but also makes important economies dependent on this added value. On the contrary, the industry 4.0 strategy in CEE has not improved its position in the triad. Germany has still a strong position as a provider of value added, but its dependence on foreign value added is high, which derives from the links with CEE.

Styles APA, Harvard, Vancouver, ISO, etc.

6

« Foreword for the Industry Track ». Dans 2019 49th Annual IEEE/IFIP International Conference on Dependable Systems and Networks – Industry Track. IEEE, 2019. http://dx.doi.org/10.1109/dsn-industry.2019.00005.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Chromik, Justyna, Anne Remke, Boudewijn R. Haverkort et Gerard Geist. « A Parser for Deep Packet Inspection of IEC-104 : A Practical Solution for Industrial Applications ». Dans 2019 49th Annual IEEE/IFIP International Conference on Dependable Systems and Networks – Industry Track. IEEE, 2019. http://dx.doi.org/10.1109/dsn-industry.2019.00008.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Azemi, Fatmir, Edmond Hajrizi et Bekim Maloku. « Maturity Level of Kosovo Manufacturing Industry with regard to Industry 4.0 ». Dans University for Business and Technology International Conference. Pristina, Kosovo : University for Business and Technology, 2017. http://dx.doi.org/10.33107/ubt-ic.2017.279.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Rhode, Matilda, Lewis Tuson, Pete Burnap et Kevin Jones. « LAB to SOC : Robust Features for Dynamic Malware Detection ». Dans 2019 49th Annual IEEE/IFIP International Conference on Dependable Systems and Networks – Industry Track. IEEE, 2019. http://dx.doi.org/10.1109/dsn-industry.2019.00010.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

null. « The industry viewpoint ». Dans IEE Colloquium : `Engineers, are you Prepared for the ATEX Directive?'. IEE, 1997. http://dx.doi.org/10.1049/ic:19971102.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Fur industry"

1

Bernholc, N. M., et P. D. Moskowitz. Biomonitoring for the photovoltaics industry. Office of Scientific and Technical Information (OSTI), juillet 1995. http://dx.doi.org/10.2172/113753.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Scace, Robert I. Metrology for the semiconductor industry. Gaithersburg, MD : National Institute of Standards and Technology, 1991. http://dx.doi.org/10.6028/nist.ir.4653.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

none,. Mining Industry Roadmap for Crosscutting Technologies. Office of Scientific and Technical Information (OSTI), mai 1999. http://dx.doi.org/10.2172/1218656.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

none,. Technology Roadmap for the Petroleum Industry. Office of Scientific and Technical Information (OSTI), février 2000. http://dx.doi.org/10.2172/1218662.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Worrell, Ernst, Nathan Martin, Lynn Price, Michael Ruth, Neal Elliot, Anna Shipley et Jennifer Thorn. Emerging Energy-Efficient Technologies for Industry. Office of Scientific and Technical Information (OSTI), mai 2005. http://dx.doi.org/10.2172/920147.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Kruger, Scott. PTSolve : High performance solvers for industry. Office of Scientific and Technical Information (OSTI), mai 2018. http://dx.doi.org/10.2172/1437662.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Theofanos, Mary. Common industry specification for usability - requirements. Gaithersburg, MD : National Institute of Standards and Technology, 2007. http://dx.doi.org/10.6028/nist.ir.7432.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

McDermott, Thomas, Arturo Suman Bretas, Kiana Pitman, Jeffery Dagle, Robert Arritt et Thomas Overbye. Industry Requirements for Geomagnetic Disturbance Models. Office of Scientific and Technical Information (OSTI), août 2022. http://dx.doi.org/10.2172/1958720.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Dorgan, John R., Frederick F. Stewart et J. Douglas Way. Energy Saving Separations Technologies for the Petroleum Industry : An Industry-University-National Laboratory Research Partnership. Office of Scientific and Technical Information (OSTI), mars 2003. http://dx.doi.org/10.2172/809159.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Swainbank, R. C., T. K. Bundtzen et J. E. Wood. Summary of Alaska's mineral industry for 1990. Alaska Division of Geological & Geophysical Surveys, 1991. http://dx.doi.org/10.14509/1473.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!