Littérature scientifique sur le sujet « Fabrication additive indirecte »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Fabrication additive indirecte ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Fabrication additive indirecte"
Li, Yan, Dichen Li, Bingheng Lu, Dajing Gao et Jack Zhou. « Current status of additive manufacturing for tissue engineering scaffold ». Rapid Prototyping Journal 21, no 6 (19 octobre 2015) : 747–62. http://dx.doi.org/10.1108/rpj-03-2014-0029.
Texte intégralTony, Anthony, Ildiko Badea, Chun Yang, Yuyi Liu, Garth Wells, Kemin Wang, Ruixue Yin, Hongbo Zhang et Wenjun Zhang. « The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices : Review and Future Directions ». Polymers 15, no 8 (18 avril 2023) : 1926. http://dx.doi.org/10.3390/polym15081926.
Texte intégralRomani, Alessia, Stefan Caba, Raffaella Suriano et Marinella Levi. « Recycling Glass and Carbon Fibers for Reusable Components in the Automotive Sector through Additive Manufacturing ». Applied Sciences 13, no 10 (9 mai 2023) : 5848. http://dx.doi.org/10.3390/app13105848.
Texte intégralAizat, M., et S. F. Khan. « Fabrication of mandible fracture plate by indirect additive manufacturing ». Journal of Physics : Conference Series 908 (octobre 2017) : 012063. http://dx.doi.org/10.1088/1742-6596/908/1/012063.
Texte intégralKhan, S. F., Kenneth W. Dalgarno et Rakhmad Arief Siregar. « Indirect Additive Manufacturing (AM) of Apatite-Wollastonite (A-W) Glass-Ceramic for Medical Implants ». Applied Mechanics and Materials 786 (août 2015) : 354–60. http://dx.doi.org/10.4028/www.scientific.net/amm.786.354.
Texte intégralGreeff, G. P. « Material Flow Rate Estimation in Material Extrusion Additive Manufacturing ». NCSL International measure 13, no 1 (2021) : 46–56. http://dx.doi.org/10.51843/measure.13.1.5.
Texte intégralKalman, Les, et Lyndsay Desimone. « A novel workflow for indirect cobalt-chromium restorations using additive manufacturing without digital design ». Journal of Dental Research, Dental Clinics, Dental Prospects 15, no 3 (25 août 2021) : 147–51. http://dx.doi.org/10.34172/joddd.2021.025.
Texte intégralHe, Rujie, Niping Zhou, Keqiang Zhang, Xueqin Zhang, Lu Zhang, Wenqing Wang et Daining Fang. « Progress and challenges towards additive manufacturing of SiC ceramic ». Journal of Advanced Ceramics 10, no 4 (18 juillet 2021) : 637–74. http://dx.doi.org/10.1007/s40145-021-0484-z.
Texte intégralKhan, Shah Fenner, M. J. German et K. W. Dalgarno. « Indirect Additive Manufacturing Processing of Poly-Lactide-co-Glycolide ». Applied Mechanics and Materials 754-755 (avril 2015) : 985–89. http://dx.doi.org/10.4028/www.scientific.net/amm.754-755.985.
Texte intégralAlmonti, Daniele, Gabriele Baiocco, Vincenzo Tagliaferri et Nadia Ucciardello. « Design and Mechanical Characterization of Voronoi Structures Manufactured by Indirect Additive Manufacturing ». Materials 13, no 5 (29 février 2020) : 1085. http://dx.doi.org/10.3390/ma13051085.
Texte intégralThèses sur le sujet "Fabrication additive indirecte"
Grimaud, Pierre. « Élaboration de prothèses dentaires par fabrication additive indirecte combinant stéréolithographie et gel casting ». Electronic Thesis or Diss., Valenciennes, Université Polytechnique Hauts-de-France, 2024. http://www.theses.fr/2024UPHF0004.
Texte intégralThis thesis results from collaborative research initiated in October 2020, the theme of which revolves around the development of technical ceramic pieces with complex geometry using innovative processes. Combining the skills of CERAMATHS of Maubeuge-France and the BCRC of Mons-Belgium, this applied thesis was co-financed by the agglomeration of Maubeuge-Val-de-Sambre (CAMVS) and the BCRC and is part of an approach of Eco-design aimed in particular at the manufacture of dental crowns in ZrO2. The established strategy consists of combining additive techniques with gel-casting processes, by molding biosourced polymer gels that can be mineralized after conventional heat treatment. This involves addressing recurring problems specific to machining operations on parts with complex geometry (production of waste, appearance of microcracks, etc.). Numerous tests and experimental measurements are presented, as well as molecular modeling calculations, in order to understand the chemical mechanisms involved during the transformation stages and correlate physicochemical measurements and forecast calculations. The thesis is therefore divided into four main chapters: Chapter II presents dental prostheses in general and a description of the various manufacturing techniques taken from the literature. Focusing mainly on the making of ceramic pieces, this bibliographical chapter allows us to compare and classify the processes between them, specifying the techniques of direct and indirect additive, subtractive and formative shaping. A focus on the gel casting process allows us to address the potential advantages of a route using a gel loaded with ceramic powders. By justifying the experimental approach adopted, this bibliography will make it possible to confront the current difficulties of implementing complex ceramic parts with the requirements of the dental field. We will see in the chapter III that Agarose can be used as a sacrificial polymer matrix capable of dispersing ceramic powders before heat treatment and densification. This chapter is thus devoted to the characterization of raw materials, then to the manufacture of ceramic parts combining an additive method (mold design) and a Gel Casting method using Agarose. On the one hand, agarose in solution is presented from a preparatory, behavioral and physicochemical point of view. Furthermore, the manufacturing of molds by stereolithography is also described. Chapter IV specifies the strategies and work undertaken to modify the general properties of agarose. Various agarose succinates have been synthesized and experimentally characterized in this direction. Results are presented to qualify the rheological behavior, with interpretations supported by macromolecular modeling calculations. Chapter V concerns the implementation work of chemically activated gelation in order to exploit the properties of sodium alginate rather than those of agarose. In this chapter, two different pathways are studied based on stoichiometric variations of the initial reaction medium, as well as promising shaping results. The general conclusion specifies a qualitative assessment and perspectives on our process which combines molds obtained by stereolithography and a viscous matrix based on natural polymers such as agarose and sodium alginate
Krimi, Imane. « Contribution au potentiel de la fabrication additive dans la construction : Proposition d’une formulation cimentaire imprimable ». Thesis, Ecole centrale de Lille, 2017. http://www.theses.fr/2017ECLI0021.
Texte intégralAdditive Manufacturing (3D printing) consists in building an object layer by layer following a 3D model. For this purpose an appropriate material, machine and model are needed. From Construction industry point of view, 3D printing is considered as a new building method. Since 2010, the use of 3D printing for construction has known a large evolution. More and more real construction projects are using this new technology. Some of these examples are Winsun in China, D-Shape in Italy, Contour Crafting in California or Apis Cor in Russia…etc.The work presented in this manuscript was conducted through an industrial PhD thesis (CIFRE) which was launched between “Ecole Centrale de Lille” and “Bouygues Construction” in 2015. The objective of this work was to study the potential of large scale 3D printing integration in the construction process and more precisely the development of a printable cement based mix design.The work is organized in three main parts.The first part was dedicated to 3D printing and cement based material as general concepts. Then their interactions were analyzed. The second part was devoted to the printable mix design. The printability was defined using three indicators: Extrudability, Buildability and layers adhesion. The third part was dedicated to check the printability of the proposed mix design. This work may be considered as a first approach to define a laboratory scale methodology for cement based materials printability testing. It is also a step to contribute to the development of construction 3D printers
Bernardo, Jesse Raymond. « Indirect Tissue Scaffold Fabrication via Additive Manufacturing and Biomimetic Mineralization ». Thesis, Virginia Tech, 2010. http://hdl.handle.net/10919/36312.
Texte intégralMaster of Science
Actes de conférences sur le sujet "Fabrication additive indirecte"
Tsybeskov, L., K. L. Moore, S. P. Duttagupta, K. D. Hirschman, D. G. Hall et P. M. Fauchet. « Fabrication and Luminescence of Large Si Nanocrystals ». Dans Chemistry and Physics of Small-Scale Structures. Washington, D.C. : Optica Publishing Group, 1997. http://dx.doi.org/10.1364/cps.1997.ctub.6.
Texte intégralTsybeskov, L., K. D. Hirschman, S. P. Duttagupta, D. G. Hall et P. M. Fauchet. « Fabrication and Characterization of Si Dots Prepared by Self-Organized Recrystallization ». Dans Quantum Optoelectronics. Washington, D.C. : Optica Publishing Group, 1997. http://dx.doi.org/10.1364/qo.1997.qfc.4.
Texte intégralOyekola, Peter O., Al-Barkat Mehedi, Morgan Ivey et Mohammad I. Albakri. « Indirect Impedance-Based NDE Through Instrumented Fixtures ; Effects of Fixture Material on Defect-Detection Capabilities ». Dans ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/smasis2021-67797.
Texte intégralAbouhashem, Azza, Ali Al-Maadeed, Abdulaziz Almohannadi, Hemalatha Rajajothi et Jolly Bhadra. « Super-hydrophobic Membrane based on PVDF/ZnO Composite Electrospun Nanofibers for wastewater & ; Oil spill treatment ». Dans Qatar University Annual Research Forum & Exhibition. Qatar University Press, 2020. http://dx.doi.org/10.29117/quarfe.2020.0049.
Texte intégralEl-Tantawi, Wael AbdelSattar. « Comparison Between Different Types of Suction Pile ». Dans Offshore Technology Conference. OTC, 2023. http://dx.doi.org/10.4043/32220-ms.
Texte intégral