Articles de revues sur le sujet « Fabrication additive (FDM) »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Fabrication additive (FDM) ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
Stöckli, Fritz, Fabio Modica et Kristina Shea. « Designing passive dynamic walking robots for additive manufacture ». Rapid Prototyping Journal 22, no 5 (15 août 2016) : 842–47. http://dx.doi.org/10.1108/rpj-11-2015-0170.
Texte intégralGutierrez, Cassie, Rudy Salas, Gustavo Hernandez, Dan Muse, Richard Olivas, Eric MacDonald, Michael D. Irwin et al. « CubeSat Fabrication through Additive Manufacturing and Micro-Dispensing ». International Symposium on Microelectronics 2011, no 1 (1 janvier 2011) : 001021–27. http://dx.doi.org/10.4071/isom-2011-tha4-paper3.
Texte intégralGeorgopoulou, Antonia, Lukas Egloff, Bram Vanderborght et Frank Clemens. « A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing ». Actuators 10, no 5 (10 mai 2021) : 102. http://dx.doi.org/10.3390/act10050102.
Texte intégralCuan-Urquizo, Enrique, Mario Martínez-Magallanes, Saúl E. Crespo-Sánchez, Alfonso Gómez-Espinosa, Oscar Olvera-Silva et Armando Roman-Flores. « Additive manufacturing and mechanical properties of lattice-curved structures ». Rapid Prototyping Journal 25, no 5 (10 juin 2019) : 895–903. http://dx.doi.org/10.1108/rpj-11-2018-0286.
Texte intégralWang, Shushu, Rakshith Badarinath, El-Amine Lehtihet et Vittaldas Prabhu. « Evaluation of Additive Manufacturing Processes in Fabrication of Personalized Robot ». International Journal of Automation Technology 11, no 1 (5 janvier 2017) : 29–37. http://dx.doi.org/10.20965/ijat.2017.p0029.
Texte intégralT., Sathies, Senthil P. et Anoop M.S. « A review on advancements in applications of fused deposition modelling process ». Rapid Prototyping Journal 26, no 4 (30 janvier 2020) : 669–87. http://dx.doi.org/10.1108/rpj-08-2018-0199.
Texte intégralHu, Xueling, Alix Marcelle Sansi Seukep, Velmurugan Senthooran, Lixin Wu, Lei Wang, Chen Zhang et Jianlei Wang. « Progress of Polymer-Based Dielectric Composites Prepared Using Fused Deposition Modeling 3D Printing ». Nanomaterials 13, no 19 (6 octobre 2023) : 2711. http://dx.doi.org/10.3390/nano13192711.
Texte intégralRaju, Suresh. « Evaluating Impact of Different Parameters in Additive Manufacturing for Complex Situations ». INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no 05 (2 juin 2024) : 1–5. http://dx.doi.org/10.55041/ijsrem35274.
Texte intégralLaban, Othman, Elsadig Mahdi, Samahat Samim et John-John Cabibihan. « A Comparative Study between Polymer and Metal Additive Manufacturing Approaches in Investigating Stiffened Hexagonal Cells ». Materials 14, no 4 (12 février 2021) : 883. http://dx.doi.org/10.3390/ma14040883.
Texte intégralPaterson, Abby Megan, Richard Bibb, R. Ian Campbell et Guy Bingham. « Comparing additive manufacturing technologies for customised wrist splints ». Rapid Prototyping Journal 21, no 3 (20 avril 2015) : 230–43. http://dx.doi.org/10.1108/rpj-10-2013-0099.
Texte intégralPrakash, Kode Jaya, et Shivraj Narayan Yeole. « Design and Additive Manufacturing of a Prototype Using Fused Deposition Modeling Technique ». Journal of Mechatronics Machine Design and Manufacturing 6, no 2 (2024) : 1–6. http://dx.doi.org/10.46610/jmmdm.2024.v06i02.001.
Texte intégralKarimi, Armin, Davood Rahmatabadi et Mostafa Baghani. « Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites : A Review ». Polymers 16, no 6 (18 mars 2024) : 831. http://dx.doi.org/10.3390/polym16060831.
Texte intégralBesnea, Daniel, Georgeta Ionascu, Mihai Avram, Lucian Bogatu et Alina Spanu. « 3D CAD, CAM and Rapid Prototyping Applied for Cam Fabrication ». Applied Mechanics and Materials 658 (octobre 2014) : 553–56. http://dx.doi.org/10.4028/www.scientific.net/amm.658.553.
Texte intégralPatterson, Albert E., Charul Chadha et Iwona M. Jasiuk. « Identification and Mapping of Manufacturability Constraints for Extrusion-Based Additive Manufacturing ». Journal of Manufacturing and Materials Processing 5, no 2 (10 avril 2021) : 33. http://dx.doi.org/10.3390/jmmp5020033.
Texte intégralQuiñonez, Paulina A., Leticia Ugarte-Sanchez, Diego Bermudez, Paulina Chinolla, Rhyan Dueck, Truman J. Cavender-Word et David A. Roberson. « Design of Shape Memory Thermoplastic Material Systems for FDM-Type Additive Manufacturing ». Materials 14, no 15 (30 juillet 2021) : 4254. http://dx.doi.org/10.3390/ma14154254.
Texte intégralUlkir, Osman, Mehmet Said Bayraklılar et Melih Kuncan. « Raster Angle Prediction of Additive Manufacturing Process Using Machine Learning Algorithm ». Applied Sciences 14, no 5 (29 février 2024) : 2046. http://dx.doi.org/10.3390/app14052046.
Texte intégralJamal, Muhammad Azfar, Owaisur Rahman Shah, Usman Ghafoor, Yumna Qureshi et M. Raheel Bhutta. « Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites via Fused Deposition Modelling : A Comprehensive Review ». Polymers 16, no 12 (7 juin 2024) : 1622. http://dx.doi.org/10.3390/polym16121622.
Texte intégralAbas, Muhammad, Mohammed Al Awadh, Tufail Habib et Sahar Noor. « Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites ». Polymers 15, no 17 (1 septembre 2023) : 3633. http://dx.doi.org/10.3390/polym15173633.
Texte intégralOlivas, Richard, Rudy Salas, Dan Muse, Eric MacDonald, Ryan Wicker, Mike Newton et Ken Church. « Structural Electronics through Additive Manufacturing and Micro-Dispensing ». International Symposium on Microelectronics 2010, no 1 (1 janvier 2010) : 000940–46. http://dx.doi.org/10.4071/isom-2010-tha5-paper6.
Texte intégralThorsnes, Quinn S., Paul R. Turner, Mohammed Azam Ali et Jaydee D. Cabral. « Integrating Fused Deposition Modeling and Melt Electrowriting for Engineering Branched Vasculature ». Biomedicines 11, no 12 (24 novembre 2023) : 3139. http://dx.doi.org/10.3390/biomedicines11123139.
Texte intégralNaidu, A. Lakshumu, K. Himanth Kumar, G. Ramesh Kumar, L. Vedavathi, J. Naveen Kumar, G. Shanmukha Rao et N. Pavan Kalyan. « A Review on Fabrication and Printing of Carbon Fiber-Reinforced Composite Filaments using FDM Process ». International Journal of Membrane Science and Technology 10, no 2 (30 juillet 2023) : 2873–81. http://dx.doi.org/10.15379/ijmst.v10i2.2979.
Texte intégralGalatas, Athanasios, Hany Hassanin, Yahya Zweiri et Lakmal Seneviratne. « Additive Manufactured Sandwich Composite/ABS Parts for Unmanned Aerial Vehicle Applications ». Polymers 10, no 11 (13 novembre 2018) : 1262. http://dx.doi.org/10.3390/polym10111262.
Texte intégralKazberov, Roman Ya. « Application of Polymer Materials and Additive Technologies in Electrical Equipment of the Agro-Industrial Complex ». Elektrotekhnologii i elektrooborudovanie v APK 48, no 4 (décembre 2021) : 51–55. http://dx.doi.org/10.22314/2658-4859-2021-68-4-51-55.
Texte intégralBarreto, Gabriela, Santiago Restrepo, Carlos Mauricio Vieira, Sergio Neves Monteiro et Henry A. Colorado. « Rice Husk with PLA : 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications ». Polymers 16, no 2 (15 janvier 2024) : 245. http://dx.doi.org/10.3390/polym16020245.
Texte intégralMogan, J., W. S. W. Harun, K. Kadirgama, D. Ramasamy, F. M. Foudzi, A. B. Sulong, F. Tarlochan et F. Ahmad. « Fused Deposition Modelling of Polymer Composite : A Progress ». Polymers 15, no 1 (21 décembre 2022) : 28. http://dx.doi.org/10.3390/polym15010028.
Texte intégralKhan, Shaheryar Atta, Bilal Ahmed Siddiqui, Muhammad Fahad et Maqsood Ahmed Khan. « Evaluation of the Effect of Infill Pattern on Mechanical Stregnth of Additively Manufactured Specimen ». Materials Science Forum 887 (mars 2017) : 128–32. http://dx.doi.org/10.4028/www.scientific.net/msf.887.128.
Texte intégralWang, Hao, Hamzeh A. Al Shraida et Jin Yu. « Predictive Modeling of Out-of-Plane Deviation for the Quality Improvement of Additive Manufacturing ». Materials Science Forum 1086 (27 avril 2023) : 79–83. http://dx.doi.org/10.4028/p-12034b.
Texte intégralWang, Yanen, Ray Tahir Mushtaq, Ammar Ahmed, Ammar Ahmed, Mudassar Rehman, Mudassar Rehman, Aqib Mashood Khan et al. « Additive manufacturing is sustainable technology : citespace based bibliometric investigations of fused deposition modeling approach ». Rapid Prototyping Journal 28, no 4 (25 octobre 2021) : 654–75. http://dx.doi.org/10.1108/rpj-05-2021-0112.
Texte intégralSingh, Sunpreet, et Rupinder Singh. « Mechanical characterization and comparison of additive manufactured ABS, Polyflex™ and ABS/Polyflex™ blended functional prototypes ». Rapid Prototyping Journal 26, no 2 (13 janvier 2020) : 225–37. http://dx.doi.org/10.1108/rpj-11-2017-0234.
Texte intégralPatterson, Albert E., Charul Chadha et Iwona M. Jasiuk. « Manufacturing process-driven structured materials (MPDSMs) : design and fabrication for extrusion-based additive manufacturing ». Rapid Prototyping Journal 28, no 4 (25 octobre 2021) : 716–31. http://dx.doi.org/10.1108/rpj-04-2021-0072.
Texte intégralTateno, Toshitake, Yuta Yaguchi et Osamu Hasegawa. « Geometric Accuracy Evaluation of Fabricated Parts by Additive Manufacturing toward Parallel Fabrication ». Applied Mechanics and Materials 761 (mai 2015) : 98–103. http://dx.doi.org/10.4028/www.scientific.net/amm.761.98.
Texte intégralTsao, Che-Chih, Ho-Hsin Chang, Meng-Hao Liu, Ho-Chia Chen, Yun-Tang Hsu, Pei-Ying Lin, Yih-Lin Chou et al. « Freeform additive manufacturing by vari-directional vari-dimensional material deposition ». Rapid Prototyping Journal 24, no 2 (12 mars 2018) : 379–94. http://dx.doi.org/10.1108/rpj-01-2017-0014.
Texte intégralAsadollahi-Yazdi, Elnaz, Julien Gardan et Pascal Lafon. « Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling ». Rapid Prototyping Journal 25, no 5 (10 juin 2019) : 875–87. http://dx.doi.org/10.1108/rpj-07-2018-0186.
Texte intégralR., Prithvirajan, Sugavaneswaran M., Sathishkumar N. et Arumaikkannu G. « Metal bellow hydroforming using additive manufactured die : a case study ». Rapid Prototyping Journal 25, no 4 (13 mai 2019) : 765–74. http://dx.doi.org/10.1108/rpj-07-2018-0182.
Texte intégralRafael Santana Queiroz, Lucas Marins Batista, Miguel Felipe Nery Vieira, Lucas Cruz da Silva, Bruno Caetano dos Santos Silva et Rodrigo Santiago Coelho. « A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots : Main Techniques, Applications, and Related Industrial-Sized Machines ». JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH 6, no 1 (8 avril 2023) : 91–97. http://dx.doi.org/10.34178/jbth.v6i1.286.
Texte intégralDrossel, Welf-Guntram, Jörn Ihlemann, Ralf Landgraf, Erik Oelsch et Marek Schmidt. « Basic Research for Additive Manufacturing of Rubber ». Polymers 12, no 10 (1 octobre 2020) : 2266. http://dx.doi.org/10.3390/polym12102266.
Texte intégralVyavahare, Swapnil, Shailendra Kumar et Deepak Panghal. « Experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling ». Rapid Prototyping Journal 26, no 9 (13 juillet 2020) : 1535–54. http://dx.doi.org/10.1108/rpj-12-2019-0315.
Texte intégralDontsov, Yury V., Sergey V. Panin, Dmitry G. Buslovich et Filippo Berto. « Taguchi Optimization of Parameters for Feedstock Fabrication and FDM Manufacturing of Wear-Resistant UHMWPE-Based Composites ». Materials 13, no 12 (15 juin 2020) : 2718. http://dx.doi.org/10.3390/ma13122718.
Texte intégralLanzotti, Antonio, Massimo Martorelli, Teresa Russo et Antonio Gloria. « Design of Additively Manufactured Lattice Structures for Tissue Regeneration ». Materials Science Forum 941 (décembre 2018) : 2154–59. http://dx.doi.org/10.4028/www.scientific.net/msf.941.2154.
Texte intégralBagatella, Simone, Annacarla Cereti, Francesco Manarini, Marco Cavallaro, Raffaella Suriano et Marinella Levi. « Thermally Conductive and Electrically Insulating Polymer-Based Composites Heat Sinks Fabricated by Fusion Deposition Modeling ». Polymers 16, no 3 (4 février 2024) : 432. http://dx.doi.org/10.3390/polym16030432.
Texte intégralAli, Hind B., Jawad K. Oleiwi et Farhad M. Othman. « Compressive and Tensile Properties of ABS Material as a Function of 3D Printing Process Parameters ». Revue des composites et des matériaux avancés 32, no 3 (30 juin 2022) : 117–23. http://dx.doi.org/10.18280/rcma.320302.
Texte intégralFountas, Nikolaos A., Ioannis Papantoniou, John D. Kechagias, Dimitrios E. Manolakos et Nikolaos M. Vaxevanidis. « Experimental and statistical investigation on flexural properties of FDM fabricated PLA specimens applying response surface methodology ». Journal of Physics : Conference Series 2692, no 1 (1 février 2024) : 012047. http://dx.doi.org/10.1088/1742-6596/2692/1/012047.
Texte intégralBamiduro, Oluwakayode, Gbadebo Owolabi, Mulugeta A. Haile et Jaret C. Riddick. « The influence of load direction, microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS ». Rapid Prototyping Journal 25, no 3 (8 avril 2019) : 462–72. http://dx.doi.org/10.1108/rpj-04-2018-0087.
Texte intégralPranzo, Daniela, Piero Larizza, Daniel Filippini et Gianluca Percoco. « Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications : A Topical Review ». Micromachines 9, no 8 (27 juillet 2018) : 374. http://dx.doi.org/10.3390/mi9080374.
Texte intégralSyrlybayev, Daniyar, Beibit Zharylkassyn, Aidana Seisekulova, Mustakhim Akhmetov, Asma Perveen et Didier Talamona. « Optimisation of Strength Properties of FDM Printed Parts—A Critical Review ». Polymers 13, no 10 (14 mai 2021) : 1587. http://dx.doi.org/10.3390/polym13101587.
Texte intégralM. Johnson, Wayne, Matthew Rowell, Bill Deason et Malik Eubanks. « Comparative evaluation of an open-source FDM system ». Rapid Prototyping Journal 20, no 3 (14 avril 2014) : 205–14. http://dx.doi.org/10.1108/rpj-06-2012-0058.
Texte intégralPodsiadły, Bartłomiej, Piotr Matuszewski, Andrzej Skalski et Marcin Słoma. « Carbon Nanotube-Based Composite Filaments for 3D Printing of Structural and Conductive Elements ». Applied Sciences 11, no 3 (30 janvier 2021) : 1272. http://dx.doi.org/10.3390/app11031272.
Texte intégralSingh, Rupinder, Ranvijay Kumar, Ilenia Farina, Francesco Colangelo, Luciano Feo et Fernando Fraternali. « Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures ». Polymers 11, no 1 (4 janvier 2019) : 62. http://dx.doi.org/10.3390/polym11010062.
Texte intégralGarcía-Martínez, Héctor, Ernesto Ávila-Navarro, Germán Torregrosa-Penalva, Alberto Rodríguez-Martínez, Carolina Blanco-Angulo et Miguel A. de la de la Casa-Lillo. « Low-Cost Additive Manufacturing Techniques Applied to the Design of Planar Microwave Circuits by Fused Deposition Modeling ». Polymers 12, no 9 (28 août 2020) : 1946. http://dx.doi.org/10.3390/polym12091946.
Texte intégralUlkir, Osman. « Energy-Consumption-Based Life Cycle Assessment of Additive-Manufactured Product with Different Types of Materials ». Polymers 15, no 6 (15 mars 2023) : 1466. http://dx.doi.org/10.3390/polym15061466.
Texte intégral