Bibliographies thématiques / FABRICATED

Littérature scientifique sur le sujet « FABRICATED »

Auteur : Grafiati
Publié le 11 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « FABRICATED ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "FABRICATED"

1

Dawson, Nathan J., Yunli Lu, Zoe Lowther, Jacob Abell, Nicholas D. Christianson, Aaron W. Weiser et Gioia Aquino. « Low-cost automated spin coater and thermal annealer for additive prototyping of multilayer Bragg reflectors ». American Journal of Physics 91, no 1 (janvier 2023) : 48–55. http://dx.doi.org/10.1119/5.0088776.

Texte intégral
Résumé :
We present and implement a design for an automated system that fabricates multilayer photonic crystal structures. The device is constructed with low-cost materials. A polystyrene/cellulose acetate multilayer Bragg reflector was fabricated to confirm the device's capability. A distributed feedback laser was also fabricated and characterized. The system has also been used to fabricate microlasers for a Modern Physics laboratory assignment in which students measure fluorescence, amplified spontaneous emission, lasing from one-dimensional Bragg reflectors, and lasing from scattering media.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Dou, Wei, Ziwei Yin, Yi Zhang, Huiyong Deng et Ning Dai. « Two-Dimensional Perovskite (PEA)2PbI4 Two-Color Blue-Green Photodetector ». Nanomaterials 12, no 15 (25 juillet 2022) : 2556. http://dx.doi.org/10.3390/nano12152556.

Texte intégral
Résumé :
Perovskite materials have been widely used to fabricate solar cells, laser diodes and other photodevices, owing to the advantage of high absorption coefficient, long carrier life and shallow defect energy levels. However, due to easy hydrolysis, it is difficult to fabricate perovskite micro-nano devices. Herein, we developed a water-free device fabrication technology and fabricated a two-dimensional (C6H5C2H4NH3)2PbI4 ((PEA)2PbI4) two-color blue-green light detector, which exhibits high detection performance under the illumination of two-color lasers (λ = 460 nm, 532 nm). Compared with bulk devices, the dark current of the fabricated devices (10−11 A) was reduced by 2 orders of magnitude. The peak responsivity and detectivity are about 1 A/W and 1011 Jones, respectively. The photodetection performance of the device is basically the same under the two-color lasers. Our results provide a new process to fabricate perovskite microelectronic devices, and the fabricated photodetector shows great application prospects in underwater detection, owing to the blue-green window existing in water.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Ali, A. « Fabricated illness ». British Dental Journal 206, no 5 (mars 2009) : 239. http://dx.doi.org/10.1038/sj.bdj.2009.173.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Gundry, Lucy. « Fabricated Skins ». TEXTILE 6, no 3 (novembre 2008) : 286–91. http://dx.doi.org/10.2752/175183508x377654.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Márquez Reiter, Rosina. « Fabricated ignorance ». Pragmatics. Quarterly Publication of the International Pragmatics Association (IPrA) 23, no 4 (1 décembre 2013) : 661–84. http://dx.doi.org/10.1075/prag.23.4.04mar.

Texte intégral
Résumé :
In this article I examine a negotiating strategy observed in telephone calls made by (prospective) clients to the Latin American call centre operation of a multinational company specialised in holiday time-shares. Through this strategy, which I have termed ‘fabricated ignorance’, the (prospective) clients show an unawareness of how the system works in order to gain access to information, services, or benefits that they are not, in theory, entitled to. They do so, among other things, by formulating pre-sequences designed to address a gap in knowledge as a way of dealing with the possibility of their requests being rejected. Essentially, the callers approach the interactions displaying only partial knowledge of the system and manage the conversations in such a way that the agents will be induced to have a false notion of what is going on. I contend that service operationalization, which positions the (prospective) clients as information-disadvantaged relative to the agents, coupled with unfair commercial practices leads them to pursue ways of counterbalancing such imbalances providing thus fertile ground for the emergence of this strategy. Fabricated ignorance is a (prospective) client’s way of sizing up opportunities. Sizing up entails a participant’s assessment of where the interaction is leading, an estimation of the extent to which is conducive to meeting the participant’s goals and the steps that might be needed to achieve them. One avenue for achieving this aim is judging the moment in the encounter when it might be potentially more convenient to make their move and to act out an uninformed stance.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Robinson, R. H. M. « FABRICATED SHIPS† ». Journal of the American Society for Naval Engineers 30, no 2 (18 mars 2009) : 407–10. http://dx.doi.org/10.1111/j.1559-3584.1918.tb02508.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Yeo, Giselle C., Behnaz Aghaei-Ghareh-Bolagh, Edwin P. Brackenreg, Matti A. Hiob, Pearl Lee et Anthony S. Weiss. « Fabricated Elastin ». Advanced Healthcare Materials 4, no 16 (13 mars 2015) : 2530–56. http://dx.doi.org/10.1002/adhm.201400781.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Yeo, Giselle C., Behnaz Aghaei‐Ghareh‐Bolagh, Edwin P. Brackenreg, Matti A. Hiob, Pearl Lee et Anthony S. Weiss. « Fabricated Elastin ». Advanced Healthcare Materials 7, no 23 (décembre 2018) : 1801342. http://dx.doi.org/10.1002/adhm.201801342.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

LEE, JIN HYOUNG, et WOUNJHANG PARK. « THREE-DIMENSIONAL METALLIC PHOTONIC CRYSTAL BASED ON SELF-ASSEMBLED GOLD NANOSHELLS ». Functional Materials Letters 01, no 01 (juin 2008) : 65–69. http://dx.doi.org/10.1142/s1793604708000125.

Texte intégral
Résumé :
Three-dimensional metallic photonic crystal is fabricated by self-assembly of gold nanoshells. In order to fabricate highly ordered crystal structure, fabrication parameters such as silica coating thickness, the zeta potential and the concentration of gold nanoshells are carefully controlled and optimized. Highly ordered gold nanoshell opal is fabricated and its structural and optical properties are presented.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Hangai, Yoshihiko, Ryusei Kobayashi, Ryosuke Suzuki, Masaaki Matsubara et Nobuhiro Yoshikawa. « Aluminum Foam-Filled Steel Tube Fabricated from Aluminum Burrs of Die-Castings by Friction Stir Back Extrusion ». Metals 9, no 2 (24 janvier 2019) : 124. http://dx.doi.org/10.3390/met9020124.

Texte intégral
Résumé :
A mixture of Al burrs of Al high-pressure die-castings and a blowing agent powder was used to fabricate Al foam-filled steel tubes by friction stir back extrusion (FSBE). It was shown that the mixture can be sufficiently consolidated to form an Al precursor that is coated on the inner surface of a steel tube by the plastic flow generated during FSBE. Namely, a precursor coated steel tube can be fabricated from Al burrs by FSBE. By heat treatment of the precursor coated steel tube, an Al foam-filled steel tube can be fabricated. Al foam was sufficiently filled in the steel tube, and the porosity was almost homogeneously distributed in the entire sample. In compression tests of the samples, the Al foam-filled steel tube fabricated from Al burrs exhibited similar compression properties to an Al foam-filled steel tube fabricated from the bulk Al precursor. Consequently, it was shown that an Al foam-filled steel tube cost-effectively fabricated from Al burrs by FSBE compares favorably with an Al foam-filled steel tube fabricated from the bulk Al precursor.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "FABRICATED"

1

Monzel, Daniel Robert. « Fabricated Preservation ». Thesis, Virginia Tech, 2020. http://hdl.handle.net/10919/98492.

Texte intégral
Résumé :
"Fabricated Preservation" aims to push the boundaries with traditional theses, creating a multi-layered experience that blends fact and fiction through a performance that centers around environmental storytelling in virtual reality. The experience questions the balance of theatrical elements in traditional storytelling which forefront text and human characters over architecture, props, and environment, and critically examines how an environment can play a crucial role in a narrative. The narrative itself focuses on one question: if a genealogy company had access to past environments via time travel, what new information could we learn about our ancestors?  The normal perceptions of a "game" are challenged, introducing real world elements to trick the audience and subtly influence how they navigate a virtual space. A complex fictional character is introduced through the performance and developed through the environment, with the hopes that the audience will gain some emotion toward them: either connecting with the character as if they were a close friend, or feeling unsettled that they observed the character's realistic personal space. This voyeuristic theme weaves its way through each layer of the storytelling, poking at the audience's morals with the hopes that they will question the experience around them.  Above all, the main goal of Fabricated Preservation is to challenge the audience to mentally engage with the virtual experience, by paying attention to the details of their environment and constructing their own version of a narrative from those details.
Master of Fine Arts
Fabricated Preservation examines how an environment can play a crucial role in a narrative. An environmental story was created that centers around a fictional character, influenced by a close friend's life. Virtual reality was used to allow the audience to immerse themselves more within a virtual bedroom environment, using virtual props to convey the personality of the character. A fictional genealogy company called The Fifth Turning was also created to convey that environmental story through a different perspective to the audience. There are two main stories that go hand in hand with this experience: the primary story is the life of a college girl in the 1990s. The secondary story is of the fictional company, the Fifth Turning, which uses time travel technology to access the bedroom environment of the college girl to obtain more personalized genealogy information.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Santini, Lauren Mee. « The Fabricated Forest ». Thesis, Harvard University, 2016. http://nrs.harvard.edu/urn-3:HUL.InstRepos:26718758.

Texte intégral
Résumé :
This dissertation approaches historical ecology as reflexive process, tying together archaeology, iconographic analysis, ethnography, and ethnohistory to argue that modern tropical ecosystems are the result of long-term, intentional engagement with human needs and priorites. Civilizational success in these environments, once thought to be marginal zones, required active and sensitive management of arboreal resources. Through a case study at the Late Preclassic and Late Classic inhabited Maya site of San Bartolo, Guatemala, I demonstrate the correspondence between the modern forest and ancient use patterns. The fieldwork component integrated silvicultural and ecohistorical development of the Petén. In conjunction with this interdisciplinary track, laboratory protocols were employed to secure ancient tree species identification on charcoal recovered from Late Classic internal chultún middens and a central plaza offering from the Preclassic period at Grupo Zacatál. Finally, connections are drawn between the archaeological data and iconographic depictions of arboreal elements present in the iconographic depictions from the site’s Preclassic structure, Las Pinturas, sub-1. Situating these remains in local context, I suggest that the canonical images form these mural scenes have connections to canonical images that appear throughout Mesoamerica, the Preclssic artists of San Bartolo connected the mythical actions to local space by adding botanical elements from species in their environment. While a full reconstruction of species exploitation and ancient silvicultural tactics are not possible from the analyses conducted in this dissertation alone, the establishment of silvicultural and archaeobotanical methods in tropical zones represents a crucial step towards more sophisticated analyses of anthropogenic ecological resilience and collapse.
Anthropology
Styles APA, Harvard, Vancouver, ISO, etc.
3

Atta, Raghied Mohammed Helmy. « Micro-fabricated magnetic sensors ». Thesis, University of Cambridge, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.624826.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Ananta, M. « A rapidly fabricated dermal equivalent ». Thesis, University College London (University of London), 2011. http://discovery.ucl.ac.uk/1301269/.

Texte intégral
Résumé :
Cell encapsulation in collagen hydrogels affords the ability to rapidly create living yet mechanically weak tissue equivalents. A previously developed compression technique that removes the interstitial fluid from these hydrogels allows for a rapid improvement of the mechanical strength with adequate cell survival. However, although the UTS of the resulting compressed collagen-rich tissue sheets approach those found in vivo, the break strength, due to the small size of these sheets, does not allow for appropriate handling properties such as suturing. In the present study it was found that both the thickness and the break strength of the compressed sheets could be improved by increasing the (pre-compression) collagen hydrogel volume. It was found here, however, that the previously described anisotropic increase of the collagen density in the hydrogel at the surface through which the interstitial fluid content is removed forms a mass transfer dependent resistance to the outflow of fluid through this surface which indicates that there is a limit to the size and strength of living tissue that can be achieved with this technique. It was found here that the suturability of the compressed sheets could also be enhanced by the hybridisation with a synthetic degradable mesh without compromising cell survival or the speed of construction. Fibroblast seeded hybrid constructs featuring a near confluent epithelial monolayer and with a stratified epithelium, created within 5 hours and 2 weeks respectively, were tested in a lapine model of an acute full thickness skin defect to test for their safety and efficacy in wound healing. Only constructs with a stratified epidermis showed a significant increase in wound closure and neo-vascularisation of the wound bed compared to untreated wounds. Comparison of the present findings with currently available living biological dressings for the treatment of chronic wounds suggests the utility and possible cost-effectiveness of this rapid tissue engineering technique.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Song, Liqun. « W-band LiGA fabricated klystron / ». For electronic version search Digital dissertations database. Restricted to UC campuses. Access is free to UC campus dissertations, 2002. http://uclibs.org/PID/11984.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Bradley, Robert John. « Capacitive ultrasonic transducers fabricated using microstereolithography ». Thesis, University of Warwick, 2007. http://wrap.warwick.ac.uk/2400/.

Texte intégral
Résumé :
Air-coupled thin-membrane capacitive ultrasonic transducers have been developed that use microstereolithography fabrication with architectures comprised entirely of partially metalised photopolymer. These devices derive considerable advantages from rapid prototyping technology, in that they are cheap to produce, and benefit from the design-to-product lead times inherent in the production of components using stereolithography. To date membranes have been produced with thicknesses ranging from 30 to 90 μm with aspect ratios in the range of 100 - 1000. These devices have been shown to operate both as transmitters and as receivers of ultrasound, and have a bandwidth approaching 100% with a centre frequency of 100 kHz. The method of fabricating these devices allows for easy modification for various applications including structural health monitoring and immersion, as well as affording the possibility of integrated focussing or wave-guiding architecture and packaging that can be incorporated into a single build. Fundamental or subtle changes to a given transducer design may be achieved incurring little additional cost or time. This novel approach to transducer fabrication enables the bespoke manufacture of specific transducer architectures from a computer aided design package using polymers that exhibit different material properties to materials used in silicon micromachining, but at the same time allow for fabrication on a scale that is approaching that of microfabrication. The versatility of 3-D rapid prototyping allows the realisation of more complicated structures than was possible previously. This work examines these transducers in terms of their characterisation and their operation in conjunction with other transduction architecture, such as focussing parabolic mirrors that were also produced using the same manufacturing technology. In addition, their operation in contacting acoustics and the reception of surface acoustic waves has been demonstrated. Immersion studies using these devices have found that that they hold promise for operation in a variety of different media. These transducers are seen as an important prototype development tool in the field of capacitive ultrasonic transduction and microphone-speaker design.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Zhao, Ming Hui. « Survival of laboratory fabricated space maintainers ». Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/44828.

Texte intégral
Résumé :
Objective: Few studies have examined the longevity of a large sample of space maintainers. The aim of this research was to determine if appliance, patient or provider factors played a role in the success and survival of laboratory-fabricated fixed space maintainers. Methods: A retrospective chart review was conducted of laboratory-fabricated fixed passive space maintainers inserted between January 1, 2000 and December 31, 2003 in a metro Vancouver pediatric dentistry/orthodontic practice. Appliances were followed until removal or, if still in use, to study’s end point; no observations were censored. Patients lost to follow-up were excluded. All appliances had been prepared and inserted using a consistent, meticulous technique. If an appliance failed prematurely, reasons for failure, e.g. cement loss, solder breakage, eruption interference, were recorded. Other data collected included child’s date of birth, gender, cement type, caries rate, oral hygiene score and patient cooperation at the time of appliance placement. Statistical analyses included descriptive statistics, Kaplan-Meier and the Mantel-Cox Log-rank survival analysis. Results: Of the original sample of 1218, 892 appliances were analyzed. The sample included band and loop (B&L), lingual holding arch (LHA) and Nance appliances from 692 subjects. Subjects were analyzed by specialty: pediatric (n=370), orthodontic (n=322). The mean age at insertion was 9(2) years. For sixty-five percent of subjects (n=452), appliances were deemed ‘successful’ i.e., “did what the clinician expected”. After controlling for the effect of other explanatory variables, type of space maintainer (p<0.03), patient gender (p=0.003) and age at insertion (p<0.0001) were all significantly related to success. Mandibular B&Ls had the longest median survival time (time for half of appliances to fail, MST) of 38 months; maxillary B&Ls, the lowest MST of 22 months. The MST of LHA and Nance were 25 months and 26 months, respectively. In the failure group, no statistical significant differences were found in the MST of space maintainers when appliance type was considered. Conclusion: The majority of the space maintainers lasted their anticipated lifetime. Appliance type, patient gender and age at insertion were significantly associated with outcomes.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Naik, Jay Prakash. « Nanowires fabricated by Focused Ion Beam ». Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4638/.

Texte intégral
Résumé :
This thesis reports research on nanowires fabricated by FIB lithography with experiments to understand their mechanical, electrical and hydrodynamic properties. Au nanowires fabricated on Si\(_3\)N\(_4\) membranes with width below 50nm exhibit liquid like instabilities and below \(\sim\)20nm the instabilities grow destroying the nanowires due to the Rayleigh- Plateau instability. Stability is better in the case for Si substrates than for the insulators Si0\(_2\) and Si\(_3\)N\(_4\). A series of 4-terminal resistance measurements were carried out on a "platinum" nanowire grown by FIB-induced decomposition of an organometallic precursor. Such nanowires are found to be a two phase percolating system, containing up to 70% by volume carbon. They have unexpected temperature behaviour which is explained using a percolation model with Kirkpatrick conduction in the presence of temperature induced strain. Au nanowire bridges of very small diameter were probed using AFM to investigate their deformation and fracture strength. Below a diameter \(\sim\)50nm, the mechanical properties are consistent with liquid-like behaviour. After reaching the fracture, the gold molecules from the bridge retract towards the fixed ends; rebinding of the gold causing reforming of the nanowire bridge can occur. FIB fabrication was also used to form a thermal bimorph MEMS cantilever which was investigated by AFM during actuation.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Baumann, Judith Marie. « Fabricated Histories (or My American Daydreams) ». VCU Scholars Compass, 2005. http://scholarscompass.vcu.edu/etd_retro/144.

Texte intégral
Résumé :
The three print series I completed within the past two years appear hardly related at first. However, these individual bodies of work, when examined chronologically, are continually informed by similar ideas. The most obvious of these is the act of piecing elements together to form something that had previously not existed, yet still influences the original source. In all three series, images are taken from an original source and re-contextualized. The idea of cultural or anthropological landscapes is also a theme throughout my work. Each individual series toyed with the idea of an imaginary or theoretical anthropological landscape in direct comparison to its pre-existing model. These humorous and oftentimes puzzling images are influenced by my over-active imagination, fueled by equal parts pop culture, playful cynicism, and desperate idealism.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Barron, James Richard. « Improving finite element methods for fabricated structures ». Thesis, Imperial College London, 2000. http://hdl.handle.net/10044/1/8022.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "FABRICATED"

1

Harthorn, Sandy. Fabricated nature. Sous la direction de Bettis Kathleen 1947-, Boise Art Museum, University of Wyoming. Art Museum. et Virginia Beach Center for the Arts. Boise : Boise Art Museum, 1994.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Rivera, Rick P. A fabricated Mexican. Houston, TX : Arte Público Press, 1995.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Faisal, Shaikh Abdullah. 100 fabricated myths. London : Darul Islam, 2000.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Babington, Mary F., Anna Docktor, Jennifer L. Mapes et Lori L. Mort. Fabricated glass products. Cleveland : Freedonia Group, 1999.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

La, Grace. LA DALLMAN : Fabricated landscapes. Milwaukee, Wis : University of Wisconsin-Milwaukee School of Architecture & Urban Planning, 2009.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

La, Grace. LA DALLMAN : Fabricated landscapes. Milwaukee, Wis : University of Wisconsin-Milwaukee School of Architecture & Urban Planning, 2009.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Western Australia. Dept. of Industrial Development., dir. Fabricated structural steel industry. [Perth] : Dept. of Industrial Development, Western Australia, 1985.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

James, Dallman, Ryan Raymund, Tejchman Filip et University of Wisconsin--Milwaukee. School of Architecture & Urban Planning., dir. LA DALLMAN : Fabricated landscapes. Milwaukee, Wis : University of Wisconsin-Milwaukee School of Architecture & Urban Planning, 2009.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Canada. Industry, Science and Technology Canada. Non-ferrous semi-fabricated products. Ottawa : Industry, Science and Technology Canada, 1988.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Canada. Industry, Science and Technology Canada. Non-ferrous semi-fabricated metal products. Ottawa : Industry, Science and Technology Canada, 1991.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "FABRICATED"

1

Munslow, Alun. « Fabricated ». Dans The Aesthetics of History, 47–63. New York : Routledge Taylor & Francis Group, 2019. | Series : Routledge approaches to history ; 31 : Routledge, 2019. http://dx.doi.org/10.4324/9780429295911-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Reading, Anthony. « Fabricated Devices ». Dans SpringerBriefs in Biology, 143–50. New York, NY : Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-0158-2_17.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Neckel, Sighard, et Elgen Sauerborn. « Fabricated Feelings ». Dans Affect, Power, and Institutions, 35–46. London : Routledge, 2022. http://dx.doi.org/10.4324/9781003303770-3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Da Vià, Cinzia. « Micro-Fabricated Sensors ». Dans From Physics to Daily Life, 99–118. Weinheim, Germany : Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527687077.ch05.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Choda, Jamyang, Heman Das Lohano et Priya Shyamsundar. « Fabricated Electric Fencing ». Dans Environmental Economics in Developing Countries, 308–28. London : Routledge India, 2022. http://dx.doi.org/10.4324/9781003253884-19.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Juarez-Martinez, Gabriela, Alessandro Chiolerio, Paolo Allia, Martino Poggio, Christian L. Degen, Li Zhang, Bradley J. Nelson et al. « MEMS Fabricated Microwave Devices ». Dans Encyclopedia of Nanotechnology, 1327. Dordrecht : Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-90-481-9751-4_100398.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Schwinn, Tobias, Oliver David Krieg et Achim Menges. « Robotically Fabricated Wood Plate Morphologies ». Dans Rob | Arch 2012, 48–61. Vienna : Springer Vienna, 2013. http://dx.doi.org/10.1007/978-3-7091-1465-0_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Svehla, Danielle, Sabrina Feldman, Jason Feldman, Frank Grunthaner, Partha Shakkottai, Linda del Castillo et Victor White. « Nano-Fabricated Size Exclusion Chromatograph ». Dans Micro Total Analysis Systems 2002, 545–47. Dordrecht : Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0295-0_182.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Bischof, Patrick, Jaime Mata-Falcón, Joris Burger et Walter Kaufmann. « Digitally Fabricated Keyed Concrete Connections ». Dans RILEM Bookseries, 241–46. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-06116-5_36.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Ylli, Klevis, et Yiannos Manoli. « Experimental Evaluation of Fabricated Architectures ». Dans Energy Harvesting for Wearable Sensor Systems, 55–76. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4448-8_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "FABRICATED"

1

Ward, M. C. L. « ‘Small' micro inertial sensors ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961213.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Wood, D. « A monolithic silicon gyroscope capable of sensing about three axes simultaneously ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961214.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Paoletti, F. « A silicon micromachined tuning fork gyroscope ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961215.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Yates, R. « A micromachined rotating gyroscope ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961216.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Harris, A. J. « A silicon membrane gyroscope with electrostatic actuation ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961217.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Greenwood, J. C. « A silicon bulk micromachined capacitive force feedback accelerometer ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961218.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Burdess, J. S. « Mechanical characterisation of a polysilicon accelerometer ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961219.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Kirby, P. B. « Thin film piezoelectric layers for sensing and actuation in microstructures ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961220.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Moore, D. F. « Silicon-on-insulator material for sensors and accelerometers ». Dans IEE Colloquium on Silicon Fabricated Inertial Instruments. IEE, 1996. http://dx.doi.org/10.1049/ic:19961221.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Kyrish, Matthew, Nelson Cardenas, Margaret Fraelich, Oscar Lechuga, Richard Claytor et Nelson Claytor. « Fabricated Freeform Optics ». Dans Adaptive Optics : Analysis, Methods & Systems. Washington, D.C. : OSA, 2015. http://dx.doi.org/10.1364/aoms.2015.jt5a.5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "FABRICATED"

1

VAN KATWIJK, C. Fabricated - MCO inlet / outlet valves. Office of Scientific and Technical Information (OSTI), juillet 1999. http://dx.doi.org/10.2172/797524.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Katoh, Y., T.-S. Byun et R. K. Nanstad. Materials Fabricated for Futurix-MI Experiment. Office of Scientific and Technical Information (OSTI), mai 2005. http://dx.doi.org/10.2172/862022.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

McIntosh, Jr, et A. C. Testing of Locally-Fabricated Tiedown Fittings. Fort Belvoir, VA : Defense Technical Information Center, septembre 1992. http://dx.doi.org/10.21236/ada265025.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Katoh, Yutai, Thak Sang Byun et Randy K. Nanstad. MATERIALS FABRICATED FOR FUTURIX-MI EXPERIMENT. Office of Scientific and Technical Information (OSTI), octobre 2005. http://dx.doi.org/10.2172/1024215.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

none,. Fabricated Metals Footprint, December 2010 (MECS 2006). Office of Scientific and Technical Information (OSTI), juin 2010. http://dx.doi.org/10.2172/1218598.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Hochanadel, Patrick Wayne. Historical photograph of vessel fabricated for LANL. Office of Scientific and Technical Information (OSTI), avril 2020. http://dx.doi.org/10.2172/1617333.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Wager, Elizabeth. Suspected fabricated data in a submitted manuscript. Committee on Publication Ethics, janvier 2006. http://dx.doi.org/10.24318/cope.2019.2.3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Wager, Elizabeth. Suspected fabricated data in a published manuscript. Committee on Publication Ethics, janvier 2006. http://dx.doi.org/10.24318/cope.2019.2.4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Loubriel, Guillermo Manuel, Thomas Lemp, Mark L. Weyn, Phillip Dale Coleman et James E. Rowley. Progress toward a MEMS fabricated 100 GHz oscillator. Office of Scientific and Technical Information (OSTI), février 2006. http://dx.doi.org/10.2172/922077.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

A. Anderko, G. Engelhardt, M.M. Lencka, M.A. Jakab, G. Tormoen et N. Sridhar. Prediction of Corrosion of Advanced Materials and Fabricated Components. Office of Scientific and Technical Information (OSTI), septembre 2007. http://dx.doi.org/10.2172/916966.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « FABRICATED » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie