Bibliographies thématiques / Evaluation parameter / Articles de revues

Articles de revues sur le sujet « Evaluation parameter »

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Evaluation parameter.
Auteur : Grafiati
Publié le 1 avril 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Evaluation parameter ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Muhammad Fadhil, Dr. Neti Karnati, M. Pd et Dr. Matin, M. Pd. « EVALUASI PROGRAM PELATIHAN PENGOLAHAN BAHAN PUSTAKA DI PUSDIKLAT PERPUSTAKAAN NASIONAL RI ». PARAMETER : Jurnal Pendidikan Universitas Negeri Jakarta 32, no 2 (26 décembre 2020) : 99–114. http://dx.doi.org/10.21009/parameter.322.02.

Texte intégral
Résumé :
This research was intended to see how the Kirkpatrick four level evaluation model is applied in the Library Material Processing training program organized by the Education and Training center of National Library of Indonesia. This evaluation research uses the Kirkpatrick evaluation model (Reaction, Learning, Behavior, Result). The subject of this research is training organizers, training instructors and training participants in the processing of library materials. Data collection techniques in this study used observation, documentation and interviews. Data validity test is done using triangulation of sources and methods. The results of this study show that the implementation of the Library Material Processing Training program has not gone well based on the aspect that being evaluated. 1) In the Reaction evaluation aspect, the implementation of training at this stage goes well. It can be seen from the results of the evaluator's last evaluation score which has a score of 93.88 or very satisfied and the last evaluation score of the instructor who has a score of 90.66 or very satisfied. 2) In the aspect of learning evaluation, the training process goes well according to the plan that was made before. This can be seen from the final score of all participants who have a score above the least limit. 3) in the Behavior aspect, the training organizers have not carried out observations of the participants' behavior after the training. 4) Then in the Result aspect, the training organizers also have not carried out observations on the participants' contributions or the use of participant's knowledge of the library performance. Keywords: Program Evaluation, Library Material Processing Training, Kirkpatrick Evaluation Model
Styles APA, Harvard, Vancouver, ISO, etc.
2

Badrujaman, Aip, Furqon Furqon, Syamsu Yusuf et Suherman Suherman. « PENGARUH MODEL EVALUASI LAYANAN DASAR BERORIENTASI AKUNTABILITAS TERHADAP PENINGKATAN AKUNTABILITAS GURU BK SMP ». PARAMETER : Jurnal Pendidikan Universitas Negeri Jakarta 27, no II (30 décembre 2015) : 158. http://dx.doi.org/10.21009/parameter.272.08.

Texte intégral
Résumé :
Abstract: This study aims to test the effectiveness of effect evaluation model of basic services oriented towards increasing the accountability of teacher accountability BK SMPN East Jakarta in organizing basic services. The research used a quantitative approach with a true research methods experiment with design waiting-list post-test only control group design. The study was conducted in East Jakarta to take the research subject teacher BK East Jakarta SMPN determined randomly as many as 37 people, divided in 17 experimental group and 16 control group. The determination of the group members using random (random assignment). The research instrument used is the scale of accountability in the review of the principal, homeroom, as well as students. Hypothesis testing is done using a technique Anacova by controlling the variables attitude towards the evaluation of basic services. The contribution of evaluation skills and attitudes towards evaluation through correlation analysis. The results showed empirically, basic service-oriented evaluation model was not able to improve the accountability of all components of the accountability of teachers BK SMPN East Jakarta in organizing basic services. Only one component of the increased accountability that is an explanation of the basic service. Variable skills to evaluate basic services make a major contribution to the implementation of the model MELDBA, while attitudes toward the evaluation does not really give contribution on MELDBA model implementation. Abstrak: Penelitian ini bertujuan menguji efektivitas pengaruh model evaluasi layanan dasar berorientasi akuntabilitas terhadap peningkatan akuntabilitas guru BK SMPN Jakarta Timur dalam menyelenggarakan layanan dasar. Penelitian menggunakan pendekatan kuantitatif dengan metode penelitian true eksperiment dengan desain waiting-list post-test only control group design. Penelitian dilakukan Jakarta Timur dengan mengambil subjek penelitian yakni guru BK SMPN Jakarta Timur yang ditentukan secara random sebanyak 37 orang yang terbagi pada 17 kelompok eksperimen dan 16 kelompok kontrol. Penentuan anggota kelompok menggunakan random (random assignment). Instrumen penelitian yang digunakan adalah skala akuntabilitas dalam tinjauan kepala sekolah, wali kelas, serta siswa. Pengujian hipotesis dilakukan menggunakan teknik ANAKOVA dengan mengontrol variabel sikap terhadap evaluasi layanan dasar. kontribusi variabel keterampilan evaluasi dan sikap terhadap evaluasi dilakukan melalui analisis korelasi. Hasil penelitian menunjukkan secara empirik, model evaluasi layanan dasar berorientasi akuntabilitas tidak mampu meningkatkan seluruh komponen akuntabilitas guru BK SMPN Jakarta Timur dalam menyelenggarakan layanan dasar. Hanya satu komponen akuntabilitas yang meningkat yaitu penjelasan mengenai layanan dasar. Variabel keterampilan melakukan evaluasi layanan dasar memberikan kontribusi besar terhadap implementasi model MELDBA, sedangkan sikap terhadap evaluasi tidak terlalu memberikan konrtibusi pada implementasi model MELDBA.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Fu, Qiang, Jianjun Liu, Jiarui Shi, Xiao Li, Xueji Cai et Zilong Meng. « Uncertainty Evaluation of Stochastic Structural Response with Correlated Random Variables ». Shock and Vibration 2022 (6 juin 2022) : 1–16. http://dx.doi.org/10.1155/2022/1496358.

Texte intégral
Résumé :
It has been realized that the influence of system parameter uncertainties may be very significant, even dominant, in stochastic response evaluation. Nevertheless, in reality, this evaluation process may be difficult to conduct due to these parameter variables (viz. structural property parameters, such as stiffness, damping, and strength, and excitation characteristics parameters, such as frequency content and duration) that are usually correlated with each other. Therefore, this study devotes to develop a method for evaluating stochastic response uncertainty involving correlated system parameter variables. In this method, the evaluation expression for the mean and standard deviation of the maximum response including uncertainty parameter variables are provided first; subsequently, a third-moment pseudo-correlation normal transformation is able to be performed for converting the correlated and non-normal system parameter variables with unknown joint probability density function (PDF) or marginal PDF into the mutually independent standard normal ones; ultimately, a point estimate procedure (PEP) based on univariate dimension reduction integration can be carried out for evaluating the structural stochastic response including uncertainty system parameters. Several numerical examples with an engineering background involving correlated system parameter variables are analyzed and discussed under stochastic excitation, and their results are compared with those yielded by Monte Carlo simulation (MCS) so as to demonstrate the effectiveness of the approach proposed. It indicated that the method proposed, in this study, provides an effective path to deal with uncertainty evaluation of stochastic structural response involving correlated random variables.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Samadi. « ANALISIS EVALUASI PEMBELAJARAN GURU TERSERTIFIKASI DI SMA JAKARTA PUSAT ». PARAMETER : Jurnal Pendidikan Universitas Negeri Jakarta 31, no 1 (28 juin 2019) : 28–40. http://dx.doi.org/10.21009/parameter.311.03.

Texte intégral
Résumé :
Abstrak The purpose of this study was to analyze aspects of the evaluation of learning in high school schools in Central Jakarta. The method used in this research is quantitative descriptive through the analysis of learning tools used in daily teaching and learning activities. The sample of this study consisted of 19 geography teachers who had been certified at SMAN 25, SMAN 4, and SMAN 68, SMAN 35, SMAN 7, SMAN 24, SMAN 30, SMAN 5, SMAN 1, and SMAN 10, and private schools namely SMA Santa Theresia, Paskalis High School, Taman Madya 1 and 5 High School, and Petojo IPPI High School. The analysis technique in this study uses descriptive methods in the form of matrix analysis. The results of the study indicate that the teacher learning tools that have been certified, especially in the evaluation component of learning are as follows: (1) Not the work of the teacher itself, namely the results of giving or the effects of selecting specifically for teaching materials and student worksheets, and (2) Not fully developed. Keywords: Learning evaluation analysis, Certified teacher, Central Jakarta High School Abstrak Tujuan penelitian ini adalah menganalisis aspek-aspe evaluasi pembelajaran di sekolah-sekolah SMA di Jakarta Pusat. Metode yang digunakan dalam penelitian ini adalah deskriptif kuantitatif melalui analisis perangkat pembelajaran yang digunakan dalam kegiatan belajar mengajar sehari-hari. Sampel penelitian ini terdiri dari 19 orang guru geografi yang telah disertifikasi di SMAN 25, SMAN 4, dan SMAN 68, SMAN 35, SMAN 7, SMAN 24, SMAN 30, SMAN 5, SMAN 1, dan SMAN 10, serta sekolah swasta yaitu SMA Santa Theresia, SMA Paskalis, SMA Taman Madya 1 dan 5, dan SMA IPPI Petojo. Teknik analisis dalam penelitian ini menggunakan metode deskriptif dalam bentuk analisis matriks. Hasil penelitian menunjukkan bahwa perangkat pembelajaran guru yang sudah disertifikasi khususnya pada komponen evaluasi pembelajaran adalah sebagai berikut : (1) Bukan hasil karya guru itu sendiri, yaitu hasil pemberian atau hasil dari memilih khusus untuk bahan ajar dan lembar kerja siswa, serta (2) Tidak dikembangkan secara maksimal. Kata kunci : Analisis evaluasi pembelajaran, Guru tersertifikasi, SMA Jakarta Pusat
Styles APA, Harvard, Vancouver, ISO, etc.
5

Leal, L., H. Derrien, K. Guber, G. Arbanas et D. Wiarda. « Evaluation of the Chromium Resonance Parameters Including Resonance Parameter Covariance ». Journal of the Korean Physical Society 59, no 2(3) (12 août 2011) : 1644–48. http://dx.doi.org/10.3938/jkps.59.1644.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

SOGAWA, Noriaki, Masao ARAKI, Tuyoshi UEHARA et Tomokazu KUSAKARI. « Reliability Evaluation on Estimated Parameters of 2-Parameter Lognormal Distribution ». PROCEEDINGS OF HYDRAULIC ENGINEERING 34 (1990) : 1–6. http://dx.doi.org/10.2208/prohe.34.1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Traegner, U. K., et M. T. Suidan. « Parameter Evaluation for Carbon Adsorption ». Journal of Environmental Engineering 115, no 1 (février 1989) : 109–28. http://dx.doi.org/10.1061/(asce)0733-9372(1989)115:1(109).

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Parajuli, Ayush. « Evaluation of weibull parameter estimators for wind speed of Jumla, Nepal ». Journal of Engineering Issues and Solutions 1, no 1 (1 mai 2021) : 1–7. http://dx.doi.org/10.3126/joeis.v1i1.36812.

Texte intégral
Résumé :
Weibull Probability Distribution Function (PDF) is widely used across world for estimation of wind power. Weibull function is a two parameter probability distribution function. The methods employed for the evaluation of these two parameters are critical for the efficient use of Weibull PDF. In the present study, three different Weibull PDF parameter estimators have been evaluated. For this purpose, the daily averaged wind speed data of Jumla Station, Nepal for period of 10 year (2004 – 2014: 2012 excluded) is studied. The parameter estimator evaluated in this study are Method of Moments (MoM), Least Square Error Method (LSEM) and Power Density Method (PDM). It has been found that Method of Moments (MoM) is the best estimator for evaluating Weibull Parameters.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Putri, Ni Luh. « MODEL PEMBELAJARAN KETERAMPILAN BINA DIRI BAGI ANAK USIA DINI TUNAGRAHITA ». PARAMETER : Jurnal Pendidikan Universitas Negeri Jakarta 25, no 2 (1 décembre 2014) : 73–85. http://dx.doi.org/10.21009/parameter.252.03.

Texte intégral
Résumé :
Abstract: This study aims to develop a learning model of Self-Care skills for mentally retarded early age children in North Sulawesi. The research was conducted in five exceptional schools in North Sulawesi which includes 10 teachers and 22 mentally retarded early age children. This study used a qualitative approach while methods of research include research and development (R&D) procedures. This Self-Building learning model were developed in four phases, which are (1) requirements analysis, (2) designing model based on the results of requirements analysis, (3) implementation of the learning model, and (4) assess the effectiveness of learning models in accordance with the teaching process. The evaluation process consist of expert matters validation, which are early age education and mentally retarded children experts, and making revision. Validation was implemented by the teachers of mentally retarded exceptional schools before making a revise, first field trials, second field trials and field tests. The trial results used to revise the product. This research resulted in RPP (Learning Implementation Plan) and a handbook for teachers. Conclusions from the study were: Implementation of the resulting learning model was effective to improve the mastery of skills to take off and put on shoes, socks, a shirt, t-shirt, short, skirt for the mentally retarded early age; The substance of the content and design flexibility of the structure of the model are included in the category of effective and the application of teaching learning model will be able to facilitate the teachers of mentally retarded exceptional School Learning Implementation Plan, carry outa learningand undertake an evaluation of learning. Abstrak: Penelitian ini bertujuan untuk mengembangkan model pembelajaran keterampilan bina diri untuk keterbelakangan mandiri pada anak usia dini di Sulawesi Utara. Penelitian ini dilaksanakan di sekolah luar biasa di Sulawesi Utara dengan melibatkan 10 orang guru dan 22 anak usia dini dengan keterbelakangan mental. Penelitian ini menggunakan pendekatan kualitatif dengan metode Research and Development (RnD). Model pembelajaran dilakukan dalam empat asa, yaitu (1) analisis kebutuhan, (2) mendisain model pembelajaran berdasarkan hasil analisis kebutuhan, (3) menerapkan model pembelajaran, dan (4) menilai keefektifan model pembelajaran sesuai dengan proses mengajar. Proses evaluasi berisi validasi meteri oleh ahli, oleh pendidik anak usia dini dan ahli keterbelakangan mental pada anak, dan membuat revisi. Validasi diterapkan oleh guru keterbelakangan mental di sekolah luar biasa sebelum membuat perbaikan, uji coba lapangan pertama, uji coba lapangan kedua, dan uji lapangan. Uji tersebut digunakan untuk memperbaik produk. Penelitian ini menghasilkan RPP (Rencana Pelaksanaan Pembelajaran) dan handbook untuk guru. Kesimpulannya dari penelitian ini adalah: penerapan menghasilkan model pembelajaran yang efektif untuk menghasilkan keterampilan dalam melepaskan dan memakai sepatu, kaus kaki, baju, kaus, dan senda untuk anak keterbelakangan mental. Substansi dari isi dan fleksibilitas desain dari struktur model termasuk didalamnnya kategori efektivitas dan penerapan model pembelajaran dan pengajaran akan mampu memfasilitasi guru di sekolah luar biasa dalam menerapkan pembelajaran, melaksanakan pembelajaran dan melakukan evaluasi pembelajaran.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Supena, Asep. « MODEL PENDIDIKAN INKLUSIF UNTUK SISWA TUNAGRAHITA DI SEKOLAH DASAR ». PARAMETER : Jurnal Pendidikan Universitas Negeri Jakarta 29, no 2 (9 juin 2017) : 145–55. http://dx.doi.org/10.21009/parameter.292.03.

Texte intégral
Résumé :
The research aims to produce a model’s implementation of inclusive education for students who are syndromic Mental Retardation in elementary school. Research conducted by the method of research and development (R&D). The research has produced two major findings: (1) a description of the facts and issues of implementation for inclusive education for students who are Syndromic Mental Retardation in elementary school today.; (2) konsep pelaksanaan model pendidikan inklusif bagi siswa tunagrahita di sekolah dasar. The resulted models include 5 main products (1) general guidelines for the implementation of inclusive education, (2) model of curriculum and learning, (3) model lesson plans, (4) evaluation model, (5) syllabus’ lessons in elementary school that have been modified for students who are Syndromic Mental Retardation Abstrak Penelitian ini bertujuan untuk menghasilkan implementasi model tentang pendidikan inklusif bagi siswa yang Tunagrahita di sekolah dasar (SD). Penelitian dilakukan dengan metode penelitian dan pengembangan (R & D). Penelitian ini menghasilkan dua temuan utama, yaitnu (1) deskripsi fakta dan isu-isu implementasi pendidikan inklusif bagi siswa tunagrahita di sekolah dasar saat ini; (2) konsep pelaksanaan model pendidikan inklusif bagi siswa yang Tunagrahita di sekolah dasar. Model hasil meliputi 5 produk utama: (a) panduan umum untuk pelaksanaan pendidikan inklusif, (b) model kurikulum dan pembelajaran, rencana Model (c) pelajaran, (d) model evaluasi, pelajaran (e) silabus 'di sekolah dasar yang telah dimodifikasi bagi siswa yang Tunagrahita.
Styles APA, Harvard, Vancouver, ISO, etc.
11

Biloshkurska, Natalia Volodymyrivna, Mykola Vasylovych Biloshkurskyi et Vitaliy Anatoliyovych Omelyanenko. « EVALUATION OF UKRAINIAN INDUSTRY INNOVATIVE DEVELOPMENT WITH A TECHNOLOGICAL PROGRESS PARAMETER ». SCIENTIFIC BULLETIN OF POLISSIA 2, no 1(13) (2018) : 23–28. http://dx.doi.org/10.25140/2410-9576-2018-2-1(13)-23-28.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
12

Escotte, L., R. Plana et J. Graffeuil. « Evaluation of noise parameter extraction methods ». IEEE Transactions on Microwave Theory and Techniques 41, no 3 (mars 1993) : 382–87. http://dx.doi.org/10.1109/22.223735.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
13

Smołalski, Grzegorz. « Knowledge modelling in signal parameter evaluation ». Measurement 42, no 6 (juillet 2009) : 863–70. http://dx.doi.org/10.1016/j.measurement.2009.01.009.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
14

Ulm, M., et H. D. Wend. « Parameter Independent Evaluation of Decentralized Stabilizability ». IFAC Proceedings Volumes 20, no 9 (août 1987) : 219–24. http://dx.doi.org/10.1016/s1474-6670(17)55709-2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Haller, F. « Molekularbiologische Evaluation prognostischer Parameter in GIST ». Der Pathologe 31, S2 (19 août 2010) : 161–66. http://dx.doi.org/10.1007/s00292-010-1333-y.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
16

Rodriguez, Mario E., et Juan C. Aristizabal. « Evaluation of a seismic damage parameter ». Earthquake Engineering & ; Structural Dynamics 28, no 5 (mai 1999) : 463–77. http://dx.doi.org/10.1002/(sici)1096-9845(199905)28:5<463 ::aid-eqe818>3.0.co;2-v.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
17

Zhang, Xinyi, Zhuo Chang, Yang Li, Hong Wu, Jian Tan, Feifei Li et Bin Cui. « Facilitating database tuning with hyper-parameter optimization ». Proceedings of the VLDB Endowment 15, no 9 (mai 2022) : 1808–21. http://dx.doi.org/10.14778/3538598.3538604.

Texte intégral
Résumé :
Recently, using automatic configuration tuning to improve the performance of modern database management systems (DBMSs) has attracted increasing interest from the database community. This is embodied with a number of systems featuring advanced tuning capabilities being developed. However, it remains a challenge to select the best solution for database configuration tuning, considering the large body of algorithm choices. In addition, beyond the applications on database systems, we could find more potential algorithms designed for configuration tuning. To this end, this paper provides a comprehensive evaluation of configuration tuning techniques from a broader perspective, hoping to better benefit the database community. In particular, we summarize three key modules of database configuration tuning systems and conduct extensive ablation studies using various challenging cases. Our evaluation demonstrates that the hyper-parameter optimization algorithms can be borrowed to further enhance the database configuration tuning. Moreover, we identify the best algorithm choices for different modules. Beyond the comprehensive evaluations, we offer an efficient and unified database configuration tuning benchmark via surrogates that reduces the evaluation cost to a minimum, allowing for extensive runs and analysis of new techniques.
Styles APA, Harvard, Vancouver, ISO, etc.
18

Hederström, E. « Renal Size Parameter ». Acta Radiologica. Diagnosis 26, no 6 (novembre 1985) : 693–96. http://dx.doi.org/10.1177/028418518502600609.

Texte intégral
Résumé :
A method for measuring the L1–L3 and L1–L4 distance by sonography is presented, and the results are compared with measurements from radiography. For 35 children aged 2 months to 13 years (mean 5.2 years) sonographic measurements displayed a mean percentage variation of 2.4 to 3.2 per cent from radiographic values. The coefficient of correlation was about 0.98. As sonography is suitable for kidney length estimation, the additional information obtained by the method presented makes it possible to perform the same kidney size evaluation by means of the same length/vertebral body-related diagrams already used in radiographic kidney size evaluation.
Styles APA, Harvard, Vancouver, ISO, etc.
19

Huang, Yawen, et Jing Wang. « Quality Evaluation Model of Education in Remote Learning and IoT Based on College Students’ Quality Cultivation ». Wireless Communications and Mobile Computing 2022 (5 septembre 2022) : 1–8. http://dx.doi.org/10.1155/2022/1171771.

Texte intégral
Résumé :
The current model for evaluating ideological and political education is mostly based on a weighted evaluation of related educational parameters, like the structure of the school and the structure of the teachers. In this cycle, the impact of college students’ general development on the construction of their ideological and political education is not considered, which makes evaluations less exact by and large. To work on the exactness of the evaluation model, you ought to upgrade the construction of the evaluation model, with the quality of education for college students as the center advancement. Education quality evaluation calculation and model parameter output calculation are integrated. In terms of the quality of training for college students, simulation tests reveal that the proposed model has the lowest blunder esteem and the highest general evaluation precision. This makes it easier to decide what kind of ideological and political education is best.
Styles APA, Harvard, Vancouver, ISO, etc.
20

Ren, Gong Chang, Zhi Wei Yang et Bo Min Meng. « Reliability Evaluation on Machining Center Based on Three-Parameter Weibull Distribution ». Advanced Materials Research 430-432 (janvier 2012) : 1645–49. http://dx.doi.org/10.4028/www.scientific.net/amr.430-432.1645.

Texte intégral
Résumé :
In order to improve the model accuracy of reliability evaluation, the Three-Parameter Weibull Distribution model of time between fault was established by introducing location parameters. The correlation coefficient optimization method based on the adaptive genetic algorithm was firstly applied to estimate the location parameter of the Three-Parameter Weibull Distribution. Shape parameter and scale parameter were obtained by the least square method. The time between failures of these series machining center submitting to three-parameter weibull Distribution was checked by the test hypothesis of goodness-of-fit distribution. Finally, the machining center was carried out reliability evaluation based on the Three-Parameter Weibull Distribution model.
Styles APA, Harvard, Vancouver, ISO, etc.
21

Huo, Jiuyuan, et Liqun Liu. « Evaluation Method of Multiobjective Functions’ Combination and Its Application in Hydrological Model Evaluation ». Computational Intelligence and Neuroscience 2020 (10 mars 2020) : 1–23. http://dx.doi.org/10.1155/2020/8594727.

Texte intégral
Résumé :
Parameter optimization of a hydrological model is intrinsically a high dimensional, nonlinear, multivariable, combinatorial optimization problem which involves a set of different objectives. Currently, the assessment of optimization results for the hydrological model is usually made through calculations and comparisons of objective function values of simulated and observed variables. Thus, the proper selection of objective functions’ combination for model parameter optimization has an important impact on the hydrological forecasting. There exist various objective functions, and how to analyze and evaluate the objective function combinations for selecting the optimal parameters has not been studied in depth. Therefore, to select the proper objective function combination which can balance the trade-off among various design objectives and achieve the overall best benefit, a simple and convenient framework for the comparison of the influence of different objective function combinations on the optimization results is urgently needed. In this paper, various objective functions related to parameters optimization of hydrological models were collected from the literature and constructed to nine combinations. Then, a selection and evaluation framework of objective functions is proposed for hydrological model parameter optimization, in which a multiobjective artificial bee colony algorithm named RMOABC is employed to optimize the hydrological model and obtain the Pareto optimal solutions. The parameter optimization problem of the Xinanjiang hydrological model was taken as the application case for long-term runoff prediction in the Heihe River basin. Finally, the technique for order preference by similarity to ideal solution (TOPSIS) based on the entropy theory is adapted to sort the Pareto optimal solutions to compare these combinations of objective functions and obtain the comprehensive optimal objective functions’ combination. The experiments results demonstrate that the combination 2 of objective functions can provide more comprehensive and reliable dominant options (i.e., parameter sets) for practical hydrological forecasting in the study area. The entropy-based method has been proved that it is effective to analyze and evaluate the performance of different combinations of objective functions and can provide more comprehensive and impersonal decision support for hydrological forecasting.
Styles APA, Harvard, Vancouver, ISO, etc.
22

Chiu, W. K., et R. Jones. « Numerical Evaluation of the Influence of Loading Rate on the Interlaminar Fracture of Graphite/Epoxy ». Engineering Plastics 2, no 5 (janvier 1994) : 147823919400200. http://dx.doi.org/10.1177/147823919400200503.

Texte intégral
Résumé :
The fracture toughness of materials that exhibit limited yielding at the crack tip is often characterised by evaluation of the “far-field” J integral. However, Carlsson et al(7) have shown that such “far-field” parameters may be less than ideal for composite materials where the crack tip in the matrix material undergoes extensive yielding. This paper investigates this proposition and presents the results of a numerical evaluation into the use of a near-tip energy integral, the so called T* parameter, for evaluating the fracture toughness of composite materials. Here attention is focused on both the near-tip fracture parameter and on load history effects.
Styles APA, Harvard, Vancouver, ISO, etc.
23

Arandjelovic-Minic, Gordana. « Sensitivity of hemodynamic parameters obtained by conventional duplex scanner in the evaluation of extracranial carotid disease severity ». Vojnosanitetski pregled 60, no 4 (2003) : 435–42. http://dx.doi.org/10.2298/vsp0304435a.

Texte intégral
Résumé :
Progresson of extracranial carotid disease is considered to be significant independent predictor in the evaluation of individual cerebrovascular prognosis. Doppler ultrasonography is a useful screening method in the diagnosis and evaluation of extracranial carotid disease. The aim of this study was to establish the most sensitive hemodynamic parameter of Doppler-ultrasonographic spectral analysis in clinical evaluation of extracranial carotid disease. Investigation included 90 patients (of both sexes) in hospital and outpatient clinic care. Spectral analysis (M-scanning technique) was used for the evaluation of hemodynamic status of carotid sinus, including the following parameters: Pourcelot (A-D/A), Gosling (A/B) and Mol (A/D) resistance parameters. After statistical processing the results of the research affirmed hemodynamic parameters' values and correlation between Pourcelot hemodynamic parameter and the degree of carotid stenosis ?=0,59 for all patients, and ?=0,58 for patients with pathological values. Correlation between Mol parameter and the degree of carotid stenosis was ?=0,50 for all patients, and ?=0,57 for patients with pathological values. Gosling parameter was not significantly different in mean value and was present in all three groups. Functional relationship between the degree of carotid stenosis and each of hemodynamic parameters was established. It was concluded that Pourcelot and Mol parameters were significant indicators of asimptomatic carotid disease, but Pourcelot parameter was considered as a more sensitive indicator in the evaluation of extracranial carotid disease.
Styles APA, Harvard, Vancouver, ISO, etc.
24

YOSHIKAWA, Tsuneo. « Evaluation of Parameter Identification Tests for Manipulators ». Transactions of the Society of Instrument and Control Engineers 23, no 11 (1987) : 1227–29. http://dx.doi.org/10.9746/sicetr1965.23.1227.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Kawada, Kazuo, Teruyuki Tamai et Toru Yamamoto. « Parameter Estimation of a Skill Evaluation Model ». Journal of Robotics, Networking and Artificial Life 4, no 3 (2017) : 205. http://dx.doi.org/10.2991/jrnal.2017.4.3.6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
26

MATSUDA, Jiro, Sadami TOMISHIGE, Ken-ichi TANAKA et Hiroshi YANO. « Evaluation of performance WEDM by parameter design. » Journal of The Japan Society of Electrical Machining Engineers 22, no 44 (1989) : 23–35. http://dx.doi.org/10.2526/jseme.22.44_23.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

Bell, Bradley M. « Generalized gamma parameter estimation and moment evaluation ». Communications in Statistics - Theory and Methods 17, no 2 (janvier 1988) : 507–17. http://dx.doi.org/10.1080/03610928808829637.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
28

Wijethunge, Dimuthu, et Woochul Kim. « New evaluation parameter for wearable thermoelectric generators ». Journal of Applied Physics 123, no 14 (14 avril 2018) : 145110. http://dx.doi.org/10.1063/1.5018762.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
29

Senseny, P. E., N. S. Brodsky et K. L. DeVries. « Parameter Evaluation for a Unified Constitutive Model ». Journal of Engineering Materials and Technology 115, no 2 (1 avril 1993) : 157–62. http://dx.doi.org/10.1115/1.2904201.

Texte intégral
Résumé :
Parameters for the unified constitutive model MATMOD [1] were evaluated for rock salt (NaCl) by using nonlinear least squares to fit the model to isothermal laboratory data. MATMOD incorporates two internal variables that represent the effects of both kinematic and isotropic hardening. The constitutive equations contain nine parameters that must be evaluated to model isothermal deformation. Laboratory data from stress relaxation, constant strain rate, and long-term creep tests were used. The latter two test types included staged tests in which the strain rate or stress was changed step-wise during the test. The test conditions were precisely controlled by a computer and the constitutive equations were integrated to simulate the laboratory conditions closely. The MATMOD parameters were then evaluated by fitting the integrated equations to the laboratory data using nonlinear least squares. The model fits the data well, but the fit may be improved by changing the evolutionary equation for the internal variable that accounts for isotropic hardening.
Styles APA, Harvard, Vancouver, ISO, etc.
30

Astudillo, Carolina, José Parra, Stephany González et Beatriz Cancino. « A new parameter for membrane cleaning evaluation ». Separation and Purification Technology 73, no 2 (18 juin 2010) : 286–93. http://dx.doi.org/10.1016/j.seppur.2010.04.015.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
31

Khoo, Chee Min, Nur Illia Shuhadah Idza Idris, Hisham Mohamad et Ahmad Shukri Abdul Rashid. « Numerical Evaluation of Settlement trough Width Parameter ». MATEC Web of Conferences 203 (2018) : 04010. http://dx.doi.org/10.1051/matecconf/201820304010.

Texte intégral
Résumé :
Construction of tunnel results in ground movements with a settlement trough which is well described by a Gaussian distribution curve. For near surface settlements, it was established that the trough width i is an approximately linear function of the tunnel depth zo in relation to a trough width parameter K and broadly independent of tunnel construction method and tunnel diameter (except for very shallow tunnels where the cover to diameter ratio is less than one). The choice of an appropriate value of K may require some judgement, since it depends on whether the ground is primarily cohesive or frictional. Published literatures recommended that for practical purposes K could be taken as 0.5 for tunnels in clays and 0.25 for tunnels in sands and gravels. This paper discusses the evaluation of trough width parameter which has not been studied much for typical soil types encountered in the Klang Valley of Malaysia (e.g. Kenny Hill formation weathered materials, granitic soil, alluvium, etc.) of which are commonly in cohesive-frictional nature. The main objective of study is to investigate, using numerical method, the arbitrary relationship of the trough width parameter for different soil types in terms of its effective shear strength parameters and stiffness parameter. A parametric study was carried out to identify parameter(s) which have a significant influence on the settlement trough width and simple equation is presented subsequently for estimating appropriate K values for empirical calculation. This study has excluded two-layered system of different geology where, for example, a tunnel in Kenny Hill formation is overlain by significant thickness of alluvium deposits. Preliminary findings based on numerical analysis showed some promising results. Effort to continually build up the field database to further refine the deduced relationship for the surface settlement trough width parameter is in progress over the course of construction for Klang Valley MRT tunnels.
Styles APA, Harvard, Vancouver, ISO, etc.
32

ZHAO, Yangang, Tetsuro ONO et Makoto SUZUKI. « DYNAMIC STRUCTURAL RELIABILITY EVALUATION CONSIDERING PARAMETER UNCERTAINTIES ». Journal of Structural and Construction Engineering (Transactions of AIJ) 62, no 497 (1997) : 33–38. http://dx.doi.org/10.3130/aijs.62.33_1.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
33

Kawada, Kazuo, et Toru Yamamoto. « Parameter Estimation of a Skill Evaluation Model ». Proceedings of International Conference on Artificial Life and Robotics 22 (19 janvier 2017) : 433–36. http://dx.doi.org/10.5954/icarob.2017.os4-3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
34

Dong, Qingbo, et Ralph E. White. « Parameter Evaluation of ORR at a RRDE ». ECS Transactions 6, no 22 (19 décembre 2019) : 15–31. http://dx.doi.org/10.1149/1.2837301.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
35

Nikolaev, S. V., et O. N. Korsun. « Nonlinearities Evaluation in the Aircraft Parameter Identification ». IOP Conference Series : Materials Science and Engineering 476 (18 février 2019) : 012020. http://dx.doi.org/10.1088/1757-899x/476/1/012020.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
36

Schneidewind, Norman F. « Predicting shuttle software reliability with parameter evaluation ». Innovations in Systems and Software Engineering 3, no 3 (11 août 2007) : 181–91. http://dx.doi.org/10.1007/s11334-007-0025-0.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
37

Randhawa, Sabah U., et Thomas M. West. « Incorporating parameter variability in multi-attribute evaluation ». Computers & ; Industrial Engineering 23, no 1-4 (novembre 1992) : 389–92. http://dx.doi.org/10.1016/0360-8352(92)90143-8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
38

Vozeh, Samuel, Pierre O. Maitre et Donald R. Stanski. « Evaluation of population (NONMEM) pharmacokinetic parameter estimates ». Journal of Pharmacokinetics and Biopharmaceutics 18, no 2 (avril 1990) : 161–73. http://dx.doi.org/10.1007/bf01063558.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
39

Ammar, O. Ben, R. Guillaume et C. Thierry. « MRP parameter evaluation under fuzzy lead times ». IFAC-PapersOnLine 49, no 12 (2016) : 1110–15. http://dx.doi.org/10.1016/j.ifacol.2016.07.644.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
40

NIHO, Tomoya, Tomoyoshi HORIE et Yoshikazu TANAKA. « Evaluation Parameter of Vibration with Magnetic Damping. 2nd Report. Evaluation of Magnetic Damping Characteristics Using Coupling Intensity Parameter. » Transactions of the Japan Society of Mechanical Engineers Series C 65, no 635 (1999) : 2643–50. http://dx.doi.org/10.1299/kikaic.65.2643.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
41

Zhang, Wenqing, Lian Xie, Bin Liu et Changlong Guan. « An Integrated Approach for Assessing Tropical Cyclone Track and Intensity Forecasts ». Weather and Forecasting 32, no 3 (20 avril 2017) : 969–90. http://dx.doi.org/10.1175/waf-d-16-0161.1.

Texte intégral
Résumé :
Abstract Track, intensity, and, in some cases, size are usually used as separate evaluation parameters to assess numerical model performance on tropical cyclone (TC) forecasts. Such an individual-parameter evaluation approach often encounters contradictory skill assessments for different parameters, for instance, small track error with large intensity error and vice versa. In this study, an intensity-weighted hurricane track density function (IW-HTDF) is designed as a new approach to the integrated evaluation of TC track, intensity, and size forecasts. The sensitivity of the TC track density to TC wind radius was investigated by calculating the IW-HTDF with density functions defined by 1) asymmetric, 2) symmetric, and 3) constant wind radii. Using the best-track data as the benchmark, IW-HTDF provides a specific score value for a TC forecast validated for a specific date and time or duration. This new TC forecast evaluation approach provides a relatively concise, integrated skill score compared with multiple skill scores when track, intensity and size are evaluated separately. It should be noted that actual observations of TC size data are very limited and so are the estimations of TC size forecasts. Therefore, including TC size as a forecast evaluation parameter is exploratory at the present. The proposed integrated evaluation method for TC track, intensity, and size forecasts can be used for evaluating the track forecast alone or in combination with intensity and size parameters. As observations and forecasts of TC size become routine in the future, including TC size as a forecast skill assessment parameter will become more imperative.
Styles APA, Harvard, Vancouver, ISO, etc.
42

Blokh, David, Ilia Stambler, Emilia Lubart et Eliyahu H. Mizrahi. « An Information Theory Approach for the Analysis of Individual and Combined Evaluation Parameters of Multiple Age-Related Diseases ». Entropy 21, no 6 (5 juin 2019) : 572. http://dx.doi.org/10.3390/e21060572.

Texte intégral
Résumé :
In view of the frequent presence of several aging-related diseases in geriatric patients, there is a need to develop analytical methodologies that would be able to perform diagnostic evaluation of several diseases at once by individual or combined evaluation parameters and select the most informative parameters or parameter combinations. So far there have been no established formal methods to enable such capabilities. We develop a new formal method for the evaluation of multiple age-related diseases by calculating the informative values (normalized mutual information) of particular parameters or parameter combinations on particular diseases, and then combine the ranks of informative values to provide an overall estimation (or correlation) on several diseases at once. Using this methodology, we evaluate a geriatric cohort, with several common age-related diseases, including cognitive and physical impairments (dementia, chronic obstructive pulmonary disease—COPD and ischemic heart disease), utilizing a set of evaluation parameters (such as demographic data and blood biomarkers) routinely available in geriatric clinical practice. This method permitted us to establish the most informative parameters and parameter combinations for several diseases at once. Combinations of evaluation parameters were shown to be more informative than individual parameters. This method, with additional clinical data, may help establish the most informative parameters and parameter combinations for the diagnostic evaluation of multiple age-related diseases and enhance specific assessment for older multi-morbid patients and treatments against old-age multimorbidity.
Styles APA, Harvard, Vancouver, ISO, etc.
43

Pang, Xue Liang, et Run Xiang Jang. « Study on Method of Key Target Tracking Parameter Matching ». Advanced Materials Research 591-593 (novembre 2012) : 2636–41. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.2636.

Texte intégral
Résumé :
This paper addresses the issue of how to get the optimal tracking parameter matching scheme. At first it establishes the comprehensive evaluation system of target tracking parameter matching scheme which includes four indexes such as capturing probability, getting probability and so on. Then based on the AHP it brings forward the evaluation method based on multi-index decision making to realize the optimized scheme evaluation. Because of the number and level of the parameters, there are numerous parameter matching schemes. So it utilized Uniform Design to optimize simulation experiment number and calculated optimized parameters matching scheme by generalized regression equation. At last, the design examples present the validity and practicability of this method on solving the problems of key target tracking parameter matching scheme.
Styles APA, Harvard, Vancouver, ISO, etc.
44

Huang, Xin, Xiaoya Dong, Jing Ma, Kuan Liu, Shibbir Ahmed, Jinlong Lin, Fiaz Ahmad et Baijing Qiu. « Evaluation and Experiment of Flight Parameter Quality of the Plant Protection UAV Based on Laser Tracker ». Agriculture 11, no 7 (5 juillet 2021) : 628. http://dx.doi.org/10.3390/agriculture11070628.

Texte intégral
Résumé :
Research shows that the accurate acquisition of flight parameters of the plant protection UAV and accurate evaluation of flight parameter quality have great significance for improving the effect and precision of spraying. In order to further improve the accuracy of the flight parameter quality evaluation of the plant protection UAV, this study conducted an evaluation and experiment of the flight parameter quality of the plant protection UAV using a laser tracker. The experimental results showed that the current plant protection UAV used the average altitude and speed of the onboard sensors to determine whether it reached the preset flight operation parameters, but this interpretation method could not accurately reflect the actual flight situation. Laser trackers could obtain more accurate flight parameters, especially instantaneous flight parameters. Compared with the laser tracker, the flight trajectory, altitude, and speed of the UAV reflected by onboard sensors were erroneous and tended to be smooth and stable. This method can obtain more accurate flight parameters, improve the accuracy of the flight parameter quality evaluation of the plant protection UAV, and provide data support and a reference for the precision spraying and performance improvement of the plant protection UAV.
Styles APA, Harvard, Vancouver, ISO, etc.
45

Fukuda, Makoto, et Kazuhiko Imano. « Evaluation Method of the Bolt Conclusion Using the Scattering Parameter for Ultrasonic Waves ». Journal of the Institute of Industrial Applications Engineers 3, no 2 (25 janvier 2015) : 80–84. http://dx.doi.org/10.12792/jiiae.3.80.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
46

Guo, Pengfei, Yingjian Yan, Bin Ye, Chunsheng Zhu, Lichao Zhang, Ting Shen et Lin Chen. « Evaluation on the Impact of Cache Parameter Selection in Access-Driven Cache Attacks ». Electronics 11, no 15 (27 juillet 2022) : 2340. http://dx.doi.org/10.3390/electronics11152340.

Texte intégral
Résumé :
Cache attacks exploit the hardware vulnerabilities inherent to modern processors and pose a new threat to Internet of Things (IoT) devices. Intuitively, different cache parameter configurations directly impact the attack effectiveness, but the current research on this issue is not systematic or comprehensive enough. This paper’s primary focus is to evaluate how different cache parameter configurations affect access-driven attacks. We build a flexible and configurable simulation verification environment based on the Chipyard framework. To reduce the interference of other factors, we established a baseline for each category of parameter evaluation. We propose a novel evaluation model, called Key Score Scissors Differential (KSSD), for evaluating common private and shared cache parameters under the local and cross-core attack models, respectively; among these are private cache replacement policy, private cache capacity, cache line size, private cache associativity, shared cache capacity, and shared cache associativity. Ours is the first evaluation of the shared cache under a cross-core attack model. As a result of the evaluation, the quantitative metrics can provide a reliable indication of information leakage level under the current cache configuration, which is helpful for attackers, defenders, and evaluators. Furthermore, we provide detailed explanations and discussions of inconsistent findings by comparing our results with the existing literature.
Styles APA, Harvard, Vancouver, ISO, etc.
47

Qin, Zengzhi, Yujun Shang, Wei Jiang, Hang Li, Hongmei Xu et Guozhong Zhang. « Comfort Evaluation and Position Optimization of the Clutch Pedal in Agricultural Machinery Based on a Multi-Level Evaluation System ». Transactions of the ASABE 64, no 6 (2021) : 1805–16. http://dx.doi.org/10.13031/trans.14287.

Texte intégral
Résumé :
HighlightsComfort evaluation and position parameter optimization of the clutch pedal were conducted.A comprehensive evaluation system was established for sitting comfort and operating comfort.A single-factor test and a response surface optimization test were carried out.Pedal inclination and its left-right distance synergistically influenced operating comfort.Abstract. The clutch pedal is the most frequently used control device in agricultural machinery and is an important component that affects operating comfort and safety. This study focused on the comfort evaluation and position parameter optimization of the clutch pedal based on a multi-degree-of-freedom test platform of an agricultural machinery cab. First, the H point (hip point) was determined based on a human body model of the operator’s sitting posture as a reference. Two position parameters were then determined: the pedal inclination angle, and the left-right distance of the pedal relative to the operator’s centerline. On this basis, a comprehensive evaluation system for sitting comfort and operating comfort was established. Single-factor tests were used to determine the comfort range and optimal levels of the two position parameters. A response surface optimization was then performed to determine the optimal parameter combination, and a first-order regression model of the response surface was established and corrected using the variance analysis method. The analysis results showed that the pedal inclination angle and its interaction with the left-right distance had a significant effect on comfort (a = 0.05). Based on the evaluation results, the mechanism underlying the influence of the position parameters on pedal comfort was analyzed. Finally, optimization and verification of the pedal position parameters were performed. The results showed that the expected comprehensive score for pedal comfort was 0.831, with an average relative error of 3.64% from the measured value, indicating that the optimization of the position parameters was reliable. The findings of this study may provide a reference for the optimal design of clutch pedals in agricultural machinery. Keywords: Agricultural machinery, Clutch pedal, Comfort evaluation, Parameter optimization, Response surface method.
Styles APA, Harvard, Vancouver, ISO, etc.
48

Tkachenko, Alina. « DEVELOPMENT OF THE NEW POINT SCALE OF ORGANOLEPTIC EVALUATION AT MANUFACTURING ORGANIC CAKES ». EUREKA : Life Sciences 4 (31 juillet 2018) : 49–55. http://dx.doi.org/10.21303/2504-5695.2018.00666.

Texte intégral
Résumé :
The article presents the ground of developing the 50-point scale for evaluating cakes by organoleptic parameters. The aim of the article is to create the new point scale of organoleptic evaluation for using at producing organic cakes. It was established, that for today such important parameters as “flavor”, “post-flavor”, “porosity structure” are not always used at the organoleptic evaluation of cakes’ quality. The article describes the recipes of four developed cakes, produced of the organic raw materials – “Grechanyk”, based on buckwheat flour, “Zhytnytsa’, based on rye flour, “Golden amaranth”, based on amaranth flour and “Hempen delight”, based on hempen flour. For evaluating organoleptic characteristics of cakes, there was presented 50-point scale that includes evaluation of the following parameters: form, surface condition, color of crust, condition and color of crumble, porosity structure, smell, taste, flavor, post-taste, malaxation of crumble. Based on the method of expert evaluations, there were determined significance coefficients for each parameter. Thus, coefficient 0,5 was set for the parameters “porosity structure” and 1,5 for “color” and “smell”, the significance coefficient was equal 1 for a series of other parameters. The developed scale provided the following criteria of cakes evaluation: 45–50 points − "perfectly”, 40–44 points − "well", 30–39 points − "satisfactorily”, lower 30 points – “unsatisfactorily”. Based on the developed scale, the developed cakes were evaluated by the gustatory commission. All developed cakes corresponded to the mark “perfectly” by organoleptic parameters. The highest index of the quality level was inherent to the cake “Grechanyk” " – 0,99 at general sum of points for the gustatory evaluation 49,95. The cake Zhytnytsa corresponded to 0,98 by the quality level, "Hempen delight" – 0,96. The lowest quality level was detected in the cake “Golden amaranth” (0,94),that is caused by the specific taste of amaranth flour.
Styles APA, Harvard, Vancouver, ISO, etc.
49

Shi, Yuning, Kenneth J. Davis, Fuqing Zhang et Christopher J. Duffy. « Evaluation of the Parameter Sensitivities of a Coupled Land Surface Hydrologic Model at a Critical Zone Observatory ». Journal of Hydrometeorology 15, no 1 (1 février 2014) : 279–99. http://dx.doi.org/10.1175/jhm-d-12-0177.1.

Texte intégral
Résumé :
Abstract Land surface models (LSMs) and hydrologic models are parameterized models. The number of involved parameters is often large. Sensitivity analysis (SA) is a key step to understand the complex relationships between parameters and between state variables and parameters. SA is also critical to understand system dynamics and to examine the parameter identifiability. In this paper, parameter SA for a fully coupled, physically based, distributed land surface hydrologic model, namely, the Flux–Penn State Integrated Hydrologic Model (Flux–PIHM), is performed. Multiparameter and single-parameter tests are performed to examine the three dimensions of identifiability: distinguishability, observability, and simplicity. Results show that Flux–PIHM model predictions of discharge, water table depth, soil moisture, land surface temperature, and surface heat fluxes are very sensitive to the selection of parameter values. Parameter uncertainties produce large uncertainties in hydrologic and land surface variable predictions. The van Genuchten parameters α and β and the Zilitinkevich parameter Czil are the most identifiable among the 20 tested parameters. Results indicate that the land surface and the subsurface are closely coupled. Hydrologic parameters have significant influence on land surface simulations. At the same time, land surface parameters have considerable impacts on hydrologic simulations; the evapotranspiration prediction prior to a strong precipitation event is critical for initializing accurate prediction of discharge peaks. Results also show that parameter identifiability depends on seasons and canopy wetness. Parameter identifiability at high and low flow conditions can be extremely different. Complex system dynamics have been revealed during the SA.
Styles APA, Harvard, Vancouver, ISO, etc.
50

Hofman, J., J. Švihálek et I. Holoubek. « Evaluation of functional diversity of soil microbial communities &ndash ; a case study ». Plant, Soil and Environment 50, No. 4 (10 décembre 2011) : 141–48. http://dx.doi.org/10.17221/4074-pse.

Texte intégral
Résumé :
In our case study, we measured the functional diversity of the microbial communities of twelve soils from the small natural area to assess if this assay is suitable for routine monitoring of soil biological quality. We found the BIOLOG assay meets especially practical benefits in routine monitoring of soils being simple and quick assay. However, we confirmed the ambiguity about the most appropriate analysis of the BIOLOG multivariate data and about the best parameter, which can be derived from the assay. The different analyses of the data were examined and various parameters derived from the BIOLOG assay were comparatively used to contribute to the discussion of how the data should be evaluated. We showed that not-normalized raw absorbances or trapezoid areas should be used for calculation of diversity index if the inoculum was standardized. There was no single answer to what parameter provided more correct results in the multivariate statistical analysis. Evaluating at least one not-normalized (e.g. trapezoid area) and one normalized parameter (e.g. absorbances read in fixed AWCD) was strongly suggested keeping in mind that they reveal different information.
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Evaluation parameter » pour d’autres types de sources :
Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie