Bibliographies thématiques / Errore geometrico

Littérature scientifique sur le sujet « Errore geometrico »

Auteur : Grafiati
Publié le 10 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Errore geometrico ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Errore geometrico"

1

Hoang, Trung Kien, et Nguyen Minh Duc Ta. « Machining Based Geometric Error Estimation Method for 3-Axis CNC Machine ». Applied Mechanics and Materials 889 (mars 2019) : 469–74. http://dx.doi.org/10.4028/www.scientific.net/amm.889.469.

Texte intégral
Résumé :
Computer numerical control (CNC) machine tool plays an extremely significant role in any manufacturing industry due to its automation and high accuracy. Keeping the CNC machine tool at its highest performance to meet the demand of high accuracy machining is always significant. To maintain the accuracy of a machine tool over the time, it is important to measure and compensate the geometric error, one of the main error source of machine tool, especially when the machine get old. There are totally 21 geometrical errors in a 3-axis machine tool including three translational errors and three rotational errors for each axis and three perpendicular error (Squareness) within three axes of the machine. This paper presents an economical and simple method for measuring the geometric error of a 3-axis CNC machine tool based on the machining of actual samples. Three samples for each axis will be machined following a design cutting path. The samples will then be measured using a coordinate measuring machine (CMM). The collect data will be used for estimating the geometric errors. The volumetric errors will be then computed and verified through machining of 3D geometries.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Liu, Junfeng, Yuqian Zhao, Tao Lai, Fei Li et Kexian Liu. « Identification of Geometrical Error on Multi-Axis Machine Tools Based on a Laser Tracker ». Journal of Physics : Conference Series 2185, no 1 (1 janvier 2022) : 012008. http://dx.doi.org/10.1088/1742-6596/2185/1/012008.

Texte intégral
Résumé :
Abstract The geometrical errors are affected by many factors for a multi-axis machine tool, such as materials, manufacturing, assembly, measurement, control, and environmental. The geometric error will eventually be reflected in the accuracy of the workpiece; therefore, for each part of the machine tool, the measurement of geometric error is essential. Most geometrical errors are measured separately for each axis. The single geometrical error measurement method is time-consuming. The multiple geometric error measurement methods have some limitations based on different instruments. Laser tracker based on GPS (Global Positioning System) positioning principle can measure the dimensional coordinate. Thus, the laser tracker measured geometric errors in high efficiency, high precision, wide range. This paper introduces the method of measuring the multi-axis machine geometrical error by using a laser tracker with a 1280mm×1280mm×240mm range and compares the measurement result from the traditional method. The results show the laser tracker method has high measurement accuracy, and rapid measurement and compensation of geometrical errors are achievable on a large-stroke machine tools.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Jian, Yi, Qian Qian Li, Hong Cheng, Bin Wu Lai et Jian Fei Zhang. « Research on Geometric Error Compensating Technique of CNC P3G Grinding Machine ». Advanced Materials Research 462 (février 2012) : 287–94. http://dx.doi.org/10.4028/www.scientific.net/amr.462.287.

Texte intégral
Résumé :
Kinematic accuracy is a key reason which influence workpiece's geometric error precision on traditional working process of precisely CNC（Computerized Numerical Control）P3G（polygon profile with 3 lobes） grinding machine. A systematic geometric error model has been presented for CNC P3G grinding machine， proposed multi-body system theory integrate with the structure of CNC P3G grinding machine tools, researched on the machine's space geometric errors. By means of separate geometric errors from the machine tools, build geometric mathematical error model. Then, identify 21 error parameters through method of 9 lines, analysis and calculate the total space geometric errors of the workpiece and wheel. Finally, formed a parameter-list and applied software error compensational technique ， achieved real-time control to the motions of workpiece and wheel. Experimental results shown that the geometrical error modeling technique is accurate and efficient, and the precision of CNC P3G grinding machine is highly raised 70%.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Jiang, Chuang, Huiliang Wang, Tianhao Han et Xing Liu. « Simulation and Compensation of Axial Geometric Errors for Cycloidal Gears Based on Form Grinding ». Mathematical Problems in Engineering 2022 (21 avril 2022) : 1–16. http://dx.doi.org/10.1155/2022/4804498.

Texte intégral
Résumé :
To increase quality, reduce cycloidal gear noise, and avoid unnecessary vibration and shock, a compensation of axial geometric errors method is proposed based on the cycloidal gear form grinding. In the process of machining cycloidal gears, the relative position relationship between the grinding wheel and workpiece is affected by geometric errors of the motion axes, which has serious effects on the surface accuracy of the cycloidal gears. Combined with cycloidal gear form grinding kinematic principles, a geometric error model for each axis of a four-axis computer numerical control form grinding machine is established. By changing the compensation value of the geometrical errors on six degrees of freedom, the error of the cycloid gear tooth surface machined is obtained. Based on a sensitivity analysis of geometrical errors of each axis, the corrections are determined through an optimization process that targets the minimization of the tooth flank errors. The geometric errors of each axis of the cycloid gear grinding machine are compensated, and then, the cycloid gears produced by the machine are processed. Through the processing experiment, the error data of the actual processing before and after the compensation are compared, which indicates that the machining accuracy of the cycloid gear grinding machine is obviously improved. It has an important guiding significance in improving the precision and performance of large CNC form gear grinding machines.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Yu, Yongjian, Guoding Chen, Jishun Li, Yujun Xue et Bitao Pang. « Prediction Method for the Radial Runout of Inner Ring in Cylindrical Roller Bearings ». Mathematical Problems in Engineering 2017 (2017) : 1–13. http://dx.doi.org/10.1155/2017/6584561.

Texte intégral
Résumé :
The motion error of assembled bearing depends on the geometric profile of bearing components. Therefore, it is crucial to establish the relationship between geometric error of bearing components and motion error of assembled bearing, which contributes to improving the rotational accuracy of assembled bearing in the design and machining of the bearing. The main purpose of this research is to propose an accurate method for predicting the radial runout of inner ring based on the geometrical constraint model of cylindrical roller bearings. In the geometrical constraint model, dimension and form errors in the inner raceway, the outer raceway, and rollers are considered, and the change of contact positions between the raceways and rollers caused by geometric errors of bearing components is taken into account. This method could predict the radial runout of inner ring after bearing components with geometric error are assembled. In order to testify the validity of the proposed prediction method, two particular cases in which the profiles of the inner raceway are circle and ellipse are selected, and the analysis algorithms for the radial runout of inner ring are derived. Two analytical results obtained from the analysis algorithms validate accuracy and effectiveness of the proposed prediction method.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Conte, Javier, Jorge Santolaria, Ana Cristina Majarena, Agustin Brau et Juan Jose Aguilar Martín. « Laser Tracker Error Modeling and Kinematic Calibration Strategy ». Key Engineering Materials 615 (juin 2014) : 63–69. http://dx.doi.org/10.4028/www.scientific.net/kem.615.63.

Texte intégral
Résumé :
Calibration of Laser Tracker systems is based most times in the determination of its geometrical errors. Some standards as the ASME B89.4.19 [1] and the VDI 2617-10 [2] describe different tests to calculate the geometric misalignments that cause systematic errors in Laser Tracker measurements. These errors are caused not only because of geometrical misalignments and other sources of error must also be taken in count. In this work we want to state the errors in a kinematic form. Errors will be split in two different components, geometric and kinematic errors. The first ones depend on the offsets, tilts and eccentricity of the mechanical and optical components of the system. Kinematic errors are different for every position of the Laser tracker, so they will be formulated as functions of three system variables: distance (R), vertical angle (V) and horizontal angle (H) usually called d, φ and θ. The goal of this work is to set up an evaluation procedure to determine geometric and kinematic errors of Laser Trackers.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Gu¨ven, H. M., et R. B. Bannerot. « Derivation of Universal Error Parameters for Comprehensive Optical Analysis of Parabolic Troughs ». Journal of Solar Energy Engineering 108, no 4 (1 novembre 1986) : 275–81. http://dx.doi.org/10.1115/1.3268106.

Texte intégral
Résumé :
A study is presented where potential optical errors in parabolic troughs are divided into two groups: random and nonrandom. It is shown that the intercept factor is a function of both random and nonrandom errors as well as geometric parameters such as concentration ratio and rim angle. Three error parameters, universal to all collector geometries, that is, “universal” error parameters which combine random and nonrandom errors with collector geometric parameters, are derived analytically. The mathematical derivation of these universal error parameters is presented. A numerical technique, a detailed ray-trace computer routine which maps rays from elemental reflector surfaces to the absorber surface, is used to validate the existence of the universal error parameters. The universal error parameters are made up of one universal random error parameter, σ* ( =σC), and two universal nonrandom error parameters, β* ( = βC) and d* (=(dr)y/D). The use of universal error parameters for comprehensive optical analysis of troughs is also presented.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Wang, Xiu Shan, Yan Li et Yong Chang Yu. « Study of the Geometrical Error Modeling of NC Lathe Based on Multi-Body System Theory ». Advanced Materials Research 139-141 (octobre 2010) : 1093–96. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.1093.

Texte intégral
Résumé :
The geometrical error modeling of the numerically controlled (NC) lathe is the key technique to kinematics design, precision analysis and error compensation. The study gives out the modeling process of the generally geometrical error model based on the multi-body system theory for the multi-axis NC machine tools. By the multi-system theory, using the low series body arrays to describe the complex mechanical system, the article has finished the geometrical error modeling of the numerically controlled lathe, analyzed the influence on the model of error of perpendicularity between the linear axes. The modeling method is highly-efficient and can not be affected by the structure of the NC machine tools. The error compensation and command correction can be implemented by the geometric errors model.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Utami, Ratih Ayu. « Analisis Kesalahan Siswa SMP dalam Menyelesaikan Soal Bangun Ruang ». MATHEdunesa 9, no 3 (18 décembre 2020) : 487–94. http://dx.doi.org/10.26740/mathedunesa.v9n3.p487-494.

Texte intégral
Résumé :
This study aims to: (1) describe the location of the students' mistakes in solving geometrical problems, (2) to describe the students' mistakes in solving geometrical problems, and (3) to describe the factors that cause students' errors in solving geometric problems. This research is a qualitative study using test and interview methods and was conducted at SMP Negeri 21 Surabaya. Selection of subjects based on criteria, namely students who made many mistakes on indicators of the location and type of error, variation of errors, openness and fluency of the subject to communicate during the interview process.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Yu, Yongjian, Guoding Chen, Jishun Li et Yujun Xue. « Influence of Geometric Error of Rollers on Rotational Accuracy of Cylindrical Roller Bearings ». Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 37, no 4 (août 2019) : 774–84. http://dx.doi.org/10.1051/jnwpu/20193740774.

Texte intégral
Résumé :
As the rotation of roller bearings is carried out under geometrical constraint of the inner ring, outer ring and multiple rollers, the motion error of the bearing should also be resulted from geometric errors of bearing parts. Therefore, it is crucial to establish the relationship between geometric errors of bearing components and motion error of assembled bearing, which contributes to improve rotational accuracy of assembled bearing in the design and machining of the bearing. For this purpose, considering roundness error and dimension error of the inner raceway, the outer raceway and rollers, a prediction method for rotational accuracy of cylindrical roller bearings is proposed, and the correctness of the proposed prediction method is verified by experimental results. The influences of roller's geometric error distribution, roller's roundness error and the number of rollers on the runout value of inner ring are investigated. The results show that, the roller arrangement with different geometric errors has a significant impact on rotational accuracy of cylindrical roller bearings. The rotational accuracy could be improved remarkably when multiple rollers with different dimension error are distributed alternately according to the size error. Even-order roundness error of rollers has a significant effect on the rotational accuracy, and the decrease level depends on the orders of roundness errors of bearing parts and the number of rollers. But odd-order roundness error of rollers has almost no effect on the rotational accuracy. The rotational accuracy of assembled bearing would be significantly improved or decreased when even order harmonic of rollers and the number of rollers satisfy specific relationships. The greater the order of roundness error of the rollers, the more severe the influence of the roller number on rotational accuracy of assembled bearing. The rotational accuracy can not be always improved with the increase of the number of rollers.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Errore geometrico"

1

Knobloch, Josef. « Mapování geometrických chyb v pracovním prostoru obráběcího stroje ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229906.

Texte intégral
Résumé :
Diploma thesis offers a new approach to the measuring of geometry errors in the machine tool workspace with the aid of laser tracker. There is a method of data acquisition and also the Matlab programs for data processing suggested in the thesis. This method can determine the accuracy and repeatibility of positioning and angular displacement of the numerical controlled axes of the measured machine tool and it compiles its mathematical model. All the gathered knowledge is used to evaluation of geometric accuracy of the virtual machined workpiece.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Fyn-Sydney, Betty Iboroma. « Phan geometries and error correcting codes ». Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4433/.

Texte intégral
Résumé :
In this thesis, we define codes based on the Phan geometry of type An. We show that the action of the group SUn+1(q) is not irreducible on the code. In the rank two case, we prove that the code is spanned by those apartments which only consist of chambers belonging to the Phan geometry and obtain submodules for the code.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Suchomel, Kamil. « Vlivy výrobních technologií na geometrickou a rozměrovou přesnost obrobků ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319263.

Texte intégral
Résumé :
The aim of the diploma thesis is to describe influences of selected production technologies on geometrical and dimensional accuracy of workpieces. Specific technologies - turning, milling and grinding and the machines on which these technologies will be implemented - a vertical lathe, a portal milling machine and a center grinder are described in this thesis. Additionally a procedure is created for adding geometric errors to a tri-axial machine tool to describe the entire working area of the machine in terms of errors. Subsequently an analysis of each geometric error is created for each machine and their influence on the resulting workpiece is determined.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Mårtensson, Jonas. « Geometric analysis of stochastic model errors in system identification ». Doctoral thesis, KTH, Reglerteknik, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4506.

Texte intégral
Résumé :
Models of dynamical systems are important in many disciplines of science, ranging from physics and traditional mechanical and electrical engineering to life sciences, computer science and economics. Engineers, for example, use models for development, analysis and control of complex technical systems. Dynamical models can be derived from physical insights, for example some known laws of nature, (which are models themselves), or, as considered here, by fitting unknown model parameters to measurements from an experiment. The latter approach is what we call system identification. A model is always (at best) an approximation of the true system, and for a model to be useful, we need some characterization of how large the model error is. In this thesis we consider model errors originating from stochastic (random) disturbances that the system was subject to during the experiment. Stochastic model errors, known as variance-errors, are usually analyzed under the assumption of an infinite number of data. In this context the variance-error can be expressed as a (complicated) function of the spectra (and cross-spectra) of the disturbances and the excitation signals, a description of the true system, and the model structure (i.e., the parametrization of the model). The primary contribution of this thesis is an alternative geometric interpretation of this expression. This geometric approach consists in viewing the asymptotic variance as an orthogonal projection on a vector space that to a large extent is defined from the model structure. This approach is useful in several ways. Primarily, it facilitates structural analysis of how, for example, model structure and model order, and possible feedback mechanisms, affect the variance-error. Moreover, simple upper bounds on the variance-error can be obtained, which are independent of the employed model structure. The accuracy of estimated poles and zeros of linear time-invariant systems can also be analyzed using results closely related to the approach described above. One fundamental conclusion is that the accuracy of estimates of unstable poles and zeros is little affected by the model order, while the accuracy deteriorates fast with the model order for stable poles and zeros. The geometric approach has also shown potential in input design, which treats how the excitation signal (input signal) should be chosen to yield informative experiments. For example, we show cases when the input signal can be chosen so that the variance-error does not depend on the model order or the model structure. Perhaps the most important contribution of this thesis, and of the geometric approach, is the analysis method as such. Hopefully the methodology presented in this work will be useful in future research on the accuracy of identified models; in particular non-linear models and models with multiple inputs and outputs, for which there are relatively few results at present.
QC 20100810
Styles APA, Harvard, Vancouver, ISO, etc.
5

Mårtensson, Jonas. « Geometric analysis of stochastic model errors in system identification / ». Stockholm : Elektro- och systemteknik, Kungliga Tekniska högskolan, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4506.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Melo, Nolmar. « Codigos geometricos de Goppa via metodos elementares ». [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/306316.

Texte intégral
Résumé :
Orientadores: Paulo Roberto Brumatti, Fernando Eduardo Torres Orihuela
Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Matematica, Estatistica e Computação Cientifica
Made available in DSpace on 2018-08-05T23:44:44Z (GMT). No. of bitstreams: 1 Melo_Nolmar_M.pdf: 705654 bytes, checksum: b8ecfe0cc3ffd2dd2f63bc813a9c4a8d (MD5) Previous issue date: 2006
Resumo: O objetivo central desta dissertação foi o de apresentar os Códigos Geométricos de Goppa via métodos elementares que foram introduzidos por J. H. van Lint, R. Pellikaan e T. Hfhold por volta de 1998. Numa primeira parte da dissertação são apresentados os conceitos fundamentais sobre corpos de funções racionais de uma curva algébrica na direção de se definir os códigos de Goppa de maneira clássica, neste estudo nos baseamos principalmente no livro ¿Algebraic Function Fields and Codes¿ de H. Stichtenoth. A segunda parte inicia-se com a introdução dos conceitos de funções peso, grau e ordem que são fundamentais para o estudo dos Códigos de Goppa via métodos elementares de álgebra linear e de semigrupos, tal estudo foi baseado em ¿Algebraic geometry codes¿ de J. H. van Lint, R. Pellikaan e T. Hfhold.A dissertação termina com a apresentação de exemplos que ilustram os métodos elementares que nos referimos acima
Abstract: The central objective of this dissertation was to present the Goppa Geometry Codes via elementary methods which were introduced by J. H. van Lint, R. Pellikaan and T. Hfhold about 1998. On the first past of such dissertation are presented the fundamental concepts about fields of rational functions of an algebraic curve in the direction as to define the Goppa Codes on a classical manner. In this study we based ourselves mainly on the book ¿Algebraic Function Fields and Codes¿ of H. Stichtenoth. The second part is initiated with an introduction about the functions weight, degree and order which are fundamental for the study of the Goppa Codes throught elementary methods of linear algebra and of semigroups and such study was based on ¿Algebraic Geometry Codes¿ of J. h. van Lint, R. Pellikaan and T. Hfhold. The dissertation ends up with a presentation of examples which illustrate the elementary methods that we have referred to above
Mestrado
Algebra
Mestre em Matemática
Styles APA, Harvard, Vancouver, ISO, etc.
7

Bhatia, Shaleen. « Effect of Machine Positional Errors on Geometric Tolerances in Additive Manufacturing ». University of Cincinnati / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1406820498.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Bibler, Jared Evan. « Effects of imbalance and geometric error on precision grinding machines ». Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/43428.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Slavíček, Josef. « Měření vřeten obráběcích strojů pomocí bezkontaktních snímačů ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230490.

Texte intégral
Résumé :
The goal of this work is to propose a suitable methodology for measuring and evaluating the geometric precision of spindle rotation. Identification and classification of errors while moving spindle. Part of this work should be also a program in LabVIEW that evaluate the errors in the motion of the spindle. Practical functionality of the proposed measurement system should be tested at selected MCV754 QUICK machines, lathes SV 18 and milling machine FNG 32. For processing of the results should be used basic statistical procedures. This thesis includes research in the field of machine tool spindles and different ways of measuring spindle motion deviations from the ideal path. There is also included the effect of sensors to measuring spindle running accuracy and identification of suitable sensors applicable for this application. There is a proposal of measurement of selected machinery, and defines all the components required for measurements that were used during spindle running precision measurement. Part of this work is a basic description of the program developed for evaluating errors in the motion of the spindle.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Ramanaiah, Harikishan Veluru. « Relation between Process Capability Indices and Geometric Errors of Machine Tool ». Thesis, KTH, Skolan för industriell teknik och management (ITM), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-215977.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Errore geometrico"

1

A. Alzubi, Jafar, Omar A. Alzubi et Thomas M. Chen. Forward Error Correction Based On Algebraic-Geometric Theory. Cham : Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-08293-6.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Bruen, Aiden A., et David L. Wehlau, dir. Error-Correcting Codes, Finite Geometries and Cryptography. Providence, Rhode Island : American Mathematical Society, 2010. http://dx.doi.org/10.1090/conm/523.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Maday, Yvon. Optimal error analysis of spectral methods with emphasis on non-constant coefficients and deformed geometries. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1989.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

1941-, Bruen Aiden A., Wehlau David L. 1960- et Canadian Mathematical Society. Special Session on Error Control Codes, Information Theory, and Applied Cryptography, dir. Error-correcting codes, finite geometries, and cryptography : Conference on Error-control Codes, Information Theory, and Applied Cryptography, December 5-6, 2007, Fields Institute, Toronto, Ontario, Canada : Canadian Mathematical Society Special Session on Error Control Codes, Information Theory, and Applied Cryptography, Dec 8-10, 2007, CMS Winter Meeting, London, Ontario, Canada. Providence, R.I : American Mathematical Society, 2010.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Geometry and codes. Dordrecht [Netherlands] : Kluwer Academic Publishers, 1988.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Barg, Alexander, et O. R. Musin. Discrete geometry and algebraic combinatorics. Providence, Rhode Island : American Mathematical Society, 2014.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

International Conference Arithmetic, Geometry, Cryptography and Coding Theory (14th 2013 Marseille, France). Algorithmic arithmetic, geometry, and coding theory : 14th International Conference, Arithmetic, Geometry, Cryptography, and Coding Theory, June 3-7 2013, CIRM, Marseille, France. Sous la direction de Ballet Stéphane 1971 editor, Perret, M. (Marc), 1963- editor et Zaytsev, Alexey (Alexey I.), 1976- editor. Providence, Rhode Island : American Mathematical Society, 2015.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Dubnov, Y. S. Errores De Las Demostraciones Geometricas. Limusa, 2002.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Eberly, Dave. Robust and Error-Free Geometric Computing. Taylor & Francis Group, 2020.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Eberly, Dave. Robust and Error-Free Geometric Computing. Taylor & Francis Group, 2020.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Errore geometrico"

1

Kiong, Tan Kok, Lee Tong Heng, Dou Huifang et Huang Sunan. « Geometrical Error Compensation ». Dans Advances in Industrial Control, 113–56. London : Springer London, 2001. http://dx.doi.org/10.1007/978-1-4471-3691-0_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Mukhopadhyay, Jayanta. « Error Analysis : Geometric Approaches ». Dans Approximation of Euclidean Metric by Digital Distances, 57–102. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9901-9_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Senin, Nicola, Stefano Pini et Roberto Groppetti. « Identification of Microtopographic Surface Features and Form Error Assessment ». Dans Geometric Tolerances, 159–88. London : Springer London, 2011. http://dx.doi.org/10.1007/978-1-84996-311-4_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Dwivedi, Shri Prakash, et Ravi Shankar Singh. « Error-Tolerant Geometric Graph Similarity ». Dans Lecture Notes in Computer Science, 337–44. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-97785-0_32.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Perret, Marc. « Binary spherical geometric codes ». Dans Applied Algebra, Algebraic Algorithms and Error-Correcting Codes, 333–39. Berlin, Heidelberg : Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/3-540-54522-0_121.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Ball, Simeon. « Alternant and Algebraic Geometric Codes ». Dans A Course in Algebraic Error-Correcting Codes, 105–21. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-41153-4_7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Morris, Daniel D., et Takeo Kanade. « Feature Localization Error in 3D Computer Vision ». Dans Uncertainty in Geometric Computations, 107–17. Boston, MA : Springer US, 2002. http://dx.doi.org/10.1007/978-1-4615-0813-7_9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Kase, Kiwamu, Hiromasa Suzuki et Fumihiko Kimura. « An Evaluation of Geometrical Errors by Segmentation with Fitting Form Error Features ». Dans Computer-aided Tolerancing, 328–37. Dordrecht : Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-1529-9_22.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Farrell, P. G. « An Introduction to Array Error Control Codes ». Dans Geometries, Codes and Cryptography, 101–28. Vienna : Springer Vienna, 1990. http://dx.doi.org/10.1007/978-3-7091-2838-1_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Blum, Walter, Werner Riegler et Luigi Rolandi. « Geometrical Track Parameters and their Errors ». Dans Particle Detection with Drift Chambers, 1–23. Berlin, Heidelberg : Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-76684-1_8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Errore geometrico"

1

Jin, Yu, Haitao Liao et Harry Pierson. « Quickest Change Point Detection in Shape Inspection of Additively Manufactured Parts Under a Multi-Resolution Framework ». Dans ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8243.

Texte intégral
Résumé :
Abstract In-situ layer-by-layer inspection is essential to achieving the full capability and advantages of additive manufacturing in producing complex geometries. The shape of each inspected layer can be described by a 2D point cloud obtained by slicing a thin layer of 3D point cloud acquired from 3D scanning. In practice, a scanned shape must be aligned with the corresponding base-truth CAD model before evaluating its geometric accuracy. Indeed, the observed geometric error is attributed to systematic, random, and alignment errors, where the systematic error is the one that triggers an alarm of system anomalies. In this work, a quickest change detection (QCD) algorithm is applied under a multi-resolution alignment and inspection framework 1) to differentiate errors from different error sources, and 2) to identify the layer where the earliest systematic deviation distribution changes during the printing process. Numerical experiments and a case study on a human heart are conducted to illustrate the performance of the proposed method in detecting layer-wise geometric error.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Golbayani, Hami, et Kazem Kazerounian. « Optimum Kinematics Error Allocation in Robotic Manipulators Using Geometric Programming ». Dans ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49764.

Texte intégral
Résumé :
In this paper, a simple and efficient formulation is presented to optimize the kinematic error mapping from the Cartesian space of the end-effector position and orientation to the inputs space. The results are optimized allocation of the joints’ errors for the accepted end-effector positioning errors. The linearized relation (Jacobian) between the end-effector position and the joints’ errors is used. Upper bounds of the error are developed so that the error function is defined in the form of posinomials of joint errors. An optimization problem is set up to find the optimum error allocation at each joint. The problem is then formulated as a zero degree-of-difficulty geometric programming. It is shown that the weight of each term in the total cost function is constant and independent of manipulator’s design. As a result, the solution to the error optimization is readily available. Explicit solutions to these weight factors are presented.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Barakat, Nael A., et Mohamed A. Elbestawi. « Detection, Modelling, and Compensation of Geometric Errors in Coordinate Measuring Machines ». Dans ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-1073.

Texte intégral
Résumé :
Abstract A rapid and inexpensive approach is proposed for identifying the existence of geometric and kinematic errors in a Coordinate Measuring Machine (CMM) by means of a circular profile measurement. The proposed approach is applied to an existing CMM where test results are compared to simulation results and errors are identified. Further, a method to improve the CMM performance by error compensation is explained. This method consists of the general and systematic kinematic and geometric error modelling of a CMM for a reference temperature, in addition to the development of a compensation strategy to correct these errors. To verify the rapid error identification approach proposed above and to calculate the error model coefficients for the CMM under investigation, individual errors of the CMM are measured by laser interferometry. The resulting error model is employed directly in the compensation for the CMM errors. Performance improvement of this CMM is presented through measurement of its work tolerance before and after compensation, in accordance with the ASME standards for CMM performance evaluation.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Tsai, Jhy-Cherng. « Geometric Tolerance Analysis for Mechanism Design ». Dans ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/dac-1053.

Texte intégral
Résumé :
Abstract Manufacturing tolerances and joint clearances are the two major factors affecting mechanism accuracy. As error analysis is one of the bottlenecks of precision machinery design, methods for geometric tolerance analysis must be investigated for mechanism design. This paper describes an approach for analyzing errors caused by geometric tolerances and clearances in mechanism design. The method consists of three parts: variational kinematic models for geometric tolerances, a systematic geometric dimensioning and tolerancing (GD&T) representation scheme, and computation methods for interval and statistical tolerances. Variational models are based on differential transformation to model kinematic errors caused by tolerances and clearances. The model is consistent with error models used in typical mechanical devices. The GD&T scheme, called the Tolerance Network (TN), employs graph theory for representing GD&T as well as fitting specifications of a design is described. Errors are propagated by traversal throughout the network and stack-up of these variational models along the dominate path in the TN. Error computation methods for both interval and statistical tolerance types are discussed. A method for computing central moments, rather than analytical distributions, of statistical tolerances is developed to reduce the computation complexity. A five-degree-of-freedom robot is used as an example at each step to illustrate this approach.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Li, Zongze, Ryuta Sato et Keiichi Shirase. « Sensitivity Analysis of Error Motions and Geometric Errors in the Case of Sphere-Shaped Workpiece ». Dans 2020 International Symposium on Flexible Automation. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/isfa2020-9610.

Texte intégral
Résumé :
Abstract Motion error of machine tool feed axes influences the machined workpiece accuracy. However, the influences of each error sources are not identical; some errors do not influence the machined surface although some error have significant influences. In addition, five-axis machine tools have more error source than conventional three-axis machine tools, and it is very tough to predict the geometric errors of the machined surface. This study proposes a method to analyze the relationships between the each error sources and the error of the machined surface. In this study, a kind of sphere-shaped workpiece is taken as a sample to explain how the sensitivity analysis makes sense in ball-end milling. The results show that the method can be applied for the axial errors, such as motion reversal errors, to make it clearer to obverse the extent of each errors. In addition, the results also show that the presented sensitivity analysis is useful to investigate that how the geometric errors influence the sphere surface accuracy. It can be proved that the presented method can help the five-axis machining center users to predict the machining errors on the designed surface of each axes error motions.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Hsu, Yung-Yuan, Chih-Hsiang Chang et You-Tern Tsai. « Modeling and Identification for Rotary Geometric Errors of Five-Axis Machine Tools With R-Test Measurement ». Dans ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-70182.

Texte intégral
Résumé :
The main purpose of this study is to use an R-test measurement device to estimate the geometric location error of the axis of rotation of five-axis machine tools. The error model of CNC machine tool describes the relationship between the individual error source and its effects on the overall position errors. This study based ISO230 to construct a geometric error model used to measure errors in the five-axis machine tools for the R-test measurement device. This model was then used to reduce the five-axis geometric error model based solely on the location error of the axis of rotation. Moreover, based on the simplified model and the overall position errors measured by the R-test with path K4, the location errors of rotary axes and ball position errors can be estimated very accurately with the least square estimation method. Finally, paths K1 and K2 were used as testing paths. The results of the test showed that the model built in this study is accurate and is effective in estimating errors.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Khodaygan, S., M. R. Movahhedy, A. Mirabolghasemi, M. Zendehbad et H. Moradi. « Statistical Error Analysis for Dimensional Control in Automotive Body Assembly Process ». Dans ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-25411.

Texte intégral
Résumé :
In mechanical assemblies, the performance, quality, cost and assemblability of the product are significantly affected by the geometric errors of the parts. This paper develops the statistical error analysis approach for dimensional control in automotive body multi-station assembly process. In this method, the homogeneous transformation matrices are used to describe the location and orientation of part and assembly features and the small homogeneous transformation matrices are used to model the errors. In this approach, the effective errors in automotive body assembly process are classified in three categories: manufacturing errors (dimensional and geometric tolerances), locating errors (fixture errors) and process errors (joining errors). In a mechanical assembly, small variations due the errors propagate according to a complex mechanism that in this approach it formulated in error analysis procedure. The propagation chain of geometric errors is described based on CAD models. The estimation of the error accumulation and the percent contributions of individual errors are based on the statistical model (root-sum-square method). The application of the proposed method is illustrated through presenting an example problem.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Chen, Zezhong C., et Wei Cai. « A Generic, Geometric Approach to Accurate Machining-Error Predictions for 3-Axis CNC Milling of Sculptured Surface Parts : Part I — Modeling and Formulation ». Dans ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99365.

Texte intégral
Résumé :
In CNC machining, machining errors are usually caused by some of the sources such as cutting tool deflection, cutting tool wear, machine tool vibration, improper coolant/lubrication, and negative thermal effect. To increase product accuracy, much research has been carried out on the prediction of machining errors. However, in milling of sculptured surface parts, due to their curved shapes, the geometries of cutting tools do not match the parts’ surfaces well if the tools cut along the tool paths on the surfaces in a point-to-point way. As a consequence, machining error is inevitable, even if there is no other source of error in ideal machining conditions. To predict machining errors caused by this tool-surface mismatch, several methods have been proposed. Some of them are simple, and some represent the geometry of machined surfaces using cutter-swept surfaces. But none of these methods is accurate and practical. In this research work, a generic, geometric approach to predicting machining errors caused by the tool-surface mismatch is proposed for 3-axis sculptured surface milling. First, a new geometric model of the furrow formed by an APT tool moving between two neighboring cutter contact (CC) points is built. Second, the mathematical formula of cutting circle envelopes is derived. Then an algorithm for calculating machining errors in each tool motion is provided. Finally, this new approach is applied to two practical parts for the accurate machining-error predictions, and these predictions are then compared to the inaccurate predictions made by two established methods to demonstrate the advantages of this approach. This approach can be used in tool path planning for high precision machining of sculptured surface parts.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Xi, Fengfeng, Marcel Verner et Chris Mechefske. « Error Sensitivity Analysis for Optimal Calibration of Parallel Kinematic Machines ». Dans ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/detc2002/dac-34113.

Texte intégral
Résumé :
In this paper, error sensitivity analysis is discussed for the purpose of optimal calibration of parallel kinematic machines (PKMs). The idea is to find a less error sensitive area in the workspace for calibration. To do so, an error model is developed that takes into consideration all the geometric errors due to imprecision in manufacturing and assembly. Based on this error model, it is shown that the error mapping from the geometric errors to the pose error of the PKM depends on the Jacobian inverse. The Jacobian inverse would introduce spurious errors that would affect the calibration results, if used without proper care. Hence, it is suggested to select the areas in the workspace with smaller condition numbers for calibration. A case study is presented to illustrate the proposed method.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Ibaraki, Soichi, Shunsuke Goto, Keisuke Tsuboi, Naoto Saito et Noriaki Kojima. « Contribution of Five-Axis Machine Geometric Errors and Workpiece Setup Errors to On-Machine Laser Scanning Measurement ». Dans ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6384.

Texte intégral
Résumé :
On-machine scanning measurement of workpiece geometry has a strong advantage in its efficiency, compared to conventional discrete measurement using a touch-trigger probe. When a workpiece is rotated and tilted, position and orientation errors in workpiece setup with respect to the machine’s rotary axes can be a significant contributor to the measurement error. The machine’s geometric errors also influence the measurement error. To establish the traceability of on-machine laser scanning measurement with workpiece rotation, this paper kinematically formulates their contribution to measured profiles. As a practical application example, this paper studies the sensitivity of work-piece setup errors and rotary axis geometric errors on the error in laser scanning measurement of an axis-symmetric part.
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Errore geometrico"

1

Bibler, J. E. Effects of imbalance and geometric error on precision grinding machines. Office of Scientific and Technical Information (OSTI), juin 1997. http://dx.doi.org/10.2172/620596.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Toutin, Th. Error Tracking in IKONOS Geometric Processing Using a 3D Parametric Modelling. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2003. http://dx.doi.org/10.4095/219801.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Mokole, Eric L. Contributions to Radar Tracking Errors for a Two-Point Target Caused by Geometric Approximations. Fort Belvoir, VA : Defense Technical Information Center, septembre 1991. http://dx.doi.org/10.21236/ada241635.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Friedman, Shmuel, Jon Wraith et Dani Or. Geometrical Considerations and Interfacial Processes Affecting Electromagnetic Measurement of Soil Water Content by TDR and Remote Sensing Methods. United States Department of Agriculture, 2002. http://dx.doi.org/10.32747/2002.7580679.bard.

Texte intégral
Résumé :
Time Domain Reflectometry (TDR) and other in-situ and remote sensing dielectric methods for determining the soil water content had become standard in both research and practice in the last two decades. Limitations of existing dielectric methods in some soils, and introduction of new agricultural measurement devices or approaches based on soil dielectric properties mandate improved understanding of the relationship between the measured effective permittivity (dielectric constant) and the soil water content. Mounting evidence indicates that consideration must be given not only to the volume fractions of soil constituents, as most mixing models assume, but also to soil attributes and ambient temperature in order to reduce errors in interpreting measured effective permittivities. The major objective of the present research project was to investigate the effects of the soil geometrical attributes and interfacial processes (bound water) on the effective permittivity of the soil, and to develop a theoretical frame for improved, soil-specific effective permittivity- water content calibration curves, which are based on easily attainable soil properties. After initializing the experimental investigation of the effective permittivity - water content relationship, we realized that the first step for water content determination by the Time Domain Reflectometry (TDR) method, namely, the TDR measurement of the soil effective permittivity still requires standardization and improvement, and we also made more efforts than originally planned towards this objective. The findings of the BARD project, related to these two consequential steps involved in TDR measurement of the soil water content, are expected to improve the accuracy of soil water content determination by existing in-situ and remote sensing dielectric methods and to help evaluate new water content sensors based on soil electrical properties. A more precise water content determination is expected to result in reduced irrigation levels, a matter which is beneficial first to American and Israeli farmers, and also to hydrologists and environmentalists dealing with production and assessment of contamination hazards of this progressively more precious natural resource. The improved understanding of the way the soil geometrical attributes affect its effective permittivity is expected to contribute to our understanding and predicting capability of other, related soil transport properties such as electrical and thermal conductivity, and diffusion coefficients of solutes and gas molecules. In addition, to the originally planned research activities we also investigated other related problems and made many contributions of short and longer terms benefits. These efforts include: Developing a method and a special TDR probe for using TDR systems to determine also the soil's matric potential; Developing a methodology for utilizing the thermodielectric effect, namely, the variation of the soil's effective permittivity with temperature, to evaluate its specific surface area; Developing a simple method for characterizing particle shape by measuring the repose angle of a granular material avalanching in water; Measurements and characterization of the pore scale, saturation degree - dependent anisotropy factor for electrical and hydraulic conductivities; Studying the dielectric properties of cereal grains towards improved determination of their water content. A reliable evaluation of the soil textural attributes (e.g. the specific surface area mentioned above) and its water content is essential for intensive irrigation and fertilization processes and within extensive precision agriculture management. The findings of the present research project are expected to improve the determination of cereal grain water content by on-line dielectric methods. A precise evaluation of grain water content is essential for pricing and evaluation of drying-before-storage requirements, issues involving energy savings and commercial aspects of major economic importance to the American agriculture. The results and methodologies developed within the above mentioned side studies are expected to be beneficial to also other industrial and environmental practices requiring the water content determination and characterization of granular materials.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Prediction of geometric-thermal machine tool errors by artificial neural networks. Gaithersburg, MD : National Institute of Standards and Technology, 1994. http://dx.doi.org/10.6028/nist.ir.5367.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Errore geometrico » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie