Littérature scientifique sur le sujet « Enhancement additive manufacturing »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Enhancement additive manufacturing ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Enhancement additive manufacturing"
Näsström, Jonas, Frank Brueckner et Alexander F. H. Kaplan. « Laser enhancement of wire arc additive manufacturing ». Journal of Laser Applications 31, no 2 (mai 2019) : 022307. http://dx.doi.org/10.2351/1.5096111.
Texte intégralBonavolontà, Francesco, Edoardo Campoluongo, Annalisa Liccardo et Rosario Schiano Lo Moriello. « Performance Enhancement of Rogowski Coil Through an Additive Manufacturing Approach ». International Review of Electrical Engineering (IREE) 14, no 3 (30 juin 2019) : 148. http://dx.doi.org/10.15866/iree.v14i3.17606.
Texte intégralTouzé, S., M. Rauch et J. Y. Hascoët. « Flowability characterization and enhancement of aluminium powders for additive manufacturing ». Additive Manufacturing 36 (décembre 2020) : 101462. http://dx.doi.org/10.1016/j.addma.2020.101462.
Texte intégralGu, Dongdong, Xinyu Shi, Reinhart Poprawe, David L. Bourell, Rossitza Setchi et Jihong Zhu. « Material-structure-performance integrated laser-metal additive manufacturing ». Science 372, no 6545 (27 mai 2021) : eabg1487. http://dx.doi.org/10.1126/science.abg1487.
Texte intégralSrinivasan, Naveen Raj, J. Chamala Vaishnavi, BL Varun Darshan, D. Srajaysikhar, G. Sakthivel et N. Raghukiran. « Enhancement of an electric drill body using design for additive manufacturing ». Journal of Physics : Conference Series 1969, no 1 (1 juillet 2021) : 012025. http://dx.doi.org/10.1088/1742-6596/1969/1/012025.
Texte intégralAndrew, J. Jefferson, Jabir Ubaid, Farrukh Hafeez, Andreas Schiffer et S. Kumar. « Impact performance enhancement of honeycombs through additive manufacturing-enabled geometrical tailoring ». International Journal of Impact Engineering 134 (décembre 2019) : 103360. http://dx.doi.org/10.1016/j.ijimpeng.2019.103360.
Texte intégralDemadis, Konstantinos D., Maria Somara et Eleftheria Mavredaki. « Additive-Driven Dissolution Enhancement of Colloidal Silica. 3. Fluorine-Containing Additives ». Industrial & ; Engineering Chemistry Research 51, no 7 (2 février 2012) : 2952–62. http://dx.doi.org/10.1021/ie202806m.
Texte intégralWang, Xiuhu. « Research Progress and Current Situation of Laser Additive Technology ». Academic Journal of Science and Technology 2, no 1 (21 juillet 2022) : 186–88. http://dx.doi.org/10.54097/ajst.v2i1.984.
Texte intégralXu, Zhenlin, Hui Zhang, Xiaojie Du, Yizhu He, Hong Luo, Guangsheng Song, Li Mao, Tingwei Zhou et Lianglong Wang. « Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing ». Corrosion Science 177 (décembre 2020) : 108954. http://dx.doi.org/10.1016/j.corsci.2020.108954.
Texte intégralKovacev, Nikolina, Sheng Li, Weining Li, Soheil Zeraati-Rezaei, Athanasios Tsolakis et Khamis Essa. « Additive Manufacturing of Novel Hybrid Monolithic Ceramic Substrates ». Aerospace 9, no 5 (7 mai 2022) : 255. http://dx.doi.org/10.3390/aerospace9050255.
Texte intégralThèses sur le sujet "Enhancement additive manufacturing"
Wei, William Lien Chin. « New Studies on Thermal Transport in Metal Additive Manufacturing Processes and Products ». Research Showcase @ CMU, 2017. http://repository.cmu.edu/dissertations/1057.
Texte intégralLi, Jiaqi. « Study of Nano-Transfer Technology for Additive Nanomanufacturing and Surface Enhanced Raman Scattering ». University of Dayton / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1628006052402601.
Texte intégralVENTOLA, LUIGI. « High-efficiency heat transfer devices by innovative manufacturing techniques ». Doctoral thesis, Politecnico di Torino, 2016. http://hdl.handle.net/11583/2644177.
Texte intégralSidhu, Kuldeep S. « Residual Stress Enhancement of Additively Manufactured Inconel 718 by Laser Shock Peening and Ultrasonic Nano-crystal Surface Modification ». University of Cincinnati / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1535464760914267.
Texte intégralImbrogno, Stano, Franco Furgiuele et Domenico Umbrello. « Surface Integrity enhancement of aerospace components produced by subtractive and additive manufacturing processes ». Thesis, 2018. http://hdl.handle.net/10955/1812.
Texte intégral« Study Thermal Property of Stereolithography 3D Printed Multiwalled Carbon Nanotubes Filled Polymer Nanocomposite ». Master's thesis, 2020. http://hdl.handle.net/2286/R.I.62966.
Texte intégralDissertation/Thesis
Masters Thesis Mechanical Engineering 2020
(9187607), Jin Cui. « COMPLIANT MICROSTRUCTURES FOR ENHANCED THERMAL CONDUCTANCE ACROSS INTERFACES ». Thesis, 2020.
Trouver le texte intégralWith the extreme increases in power density of electronic devices, the contact thermal resistance imposed at interfaces between mating solids becomes a major challenge in thermal management. This contact thermal resistance is mainly caused by micro-scale surface asperities (roughness) and wavy profile of surface (nonflatness) which severely reduce the contact area available for heat conduction. High contact pressures (1~100 MPa) can be used to deform the surface asperities to increase contact area. Besides, a variety of conventional thermal interface materials (TIM), such as greases and pastes, are used to improve the contact thermal conductance by filling the remaining air gaps. However, there are still some applications where such TIMs are disallowed for reworkability concerns. For example, heat must be transferred across dry interfaces to a heat sink in pluggable opto-electronic transceivers which needs to repeatedly slide into / out of contact with the heat sink. Dry contact and low contact pressures are required for this sliding application.
This dissertation presents a metallized micro-spring array as a surface coating to enhance dry contact thermal conductance under ultra-low interfacial contact pressure. The shape of the micro-springs is designed to be mechanically compliant to achieve conformal contact between nonflat surfaces. The polymer scaffolds of the micro-structured TIMs are fabricated by using a custom projection micro-stereolithography (μSL) system. By applying the projection scheme, this method is more cost-effective and high-throughput than other 3D micro-fabrication methods using a scanning scheme. The thermal conductance of polymer micro-springs is further enhanced by metallization using plating and surface polishing on their top surfaces. The measured mechanical compliance of TIMs indicates that they can deform ~10s μm under ~10s kPa contact pressures over their footprint area, which is large enough to accommodate most of surface nonflatness of electronic packages. The measured thermal resistances of the TIM at different fabrication stages confirms the enhanced thermal conductance by applying metallization and surface polishing. Thermal resistances of the TIMs are compared to direct metal-to-metal contact thermal resistance for flat and nonflat mating surfaces, which confirms that the TIM outperforms direct contact. A thin layer of soft polymer is coated on the top surfaces of the TIMs to accommodate surface roughness that has a smaller spatial period than the micro-springs. For rough surfaces, the polymer-coated TIM has reduced thermal resistance which is comparable to a benchmark case where the top surfaces of the TIM are glued to the mating surface. A polymer base is designed under the micro-spring array which can provide the advantages for handling as a standalone material or integration convenience, at the toll of an increased insertion resistance. Through-holes are designed in the base layer and coated with thermally conductive metal after metallization to enhance thermal conductance of the base layer; a thin layer of epoxy is applied between the base layer and the working surface to reduce contact thermal resistance exposed on the base layer. Cycling tests are conducted on the TIMs; the results show good early-stage reliability of the TIM under normal pressure, sliding contact, and temperature cycles. The TIM is thermally demonstrated on a pluggable application, namely, a CFP4 module, which shows enhanced thermal conductance by applying the TIM.
To further enhance the potential mechanical compliance of microstructured surfaces, a stable double curved beam structure with near-zero stiffness composed of intrinsic negative and positive stiffness elastic elements is designed and fabricated by introducing residual stresses. Stiffness measurements shows that the positive-stiffness single curved beam, which is the same as the top beam in the double curved beam, is stiffer than the double curved beam, which confirms the negative stiffness of the bottom beam in the double curved beam. Layered near zero-stiffness materials made of these structures are built to demonstrate the scalability of the zero-stiffness zone.Livres sur le sujet "Enhancement additive manufacturing"
International Conference on Gears 2022. VDI Verlag, 2022. http://dx.doi.org/10.51202/9783181023891.
Texte intégralChapitres de livres sur le sujet "Enhancement additive manufacturing"
Chandrashekar, Arjun C., Sreekanth Vasudev Nagar et K. Guruprasad. « A Skill Enhancement Virtual Training Model for Additive Manufacturing Technologies ». Dans Lecture Notes in Networks and Systems, 532–43. Cham : Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-23162-0_48.
Texte intégralKoneri, Raghavendra, Sanket Mulye, Karthik Ananthakrishna, Rakesh Hota, Brajamohan Khatei et Srikanth Bontha. « Additive Manufacturing of Lattice Structures for Heat Transfer Enhancement in Pipe Flow ». Dans Lecture Notes in Mechanical Engineering, 233–46. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5689-0_21.
Texte intégralŁabowska, Magdalena B., Ewa I. Borowska, Patrycja Szymczyk-Ziółkowska, Izabela Michalak et Jerzy Detyna. « Hydrogel Based on Alginate as an Ink in Additive Manufacturing Technology—Processing Methods and Printability Enhancement ». Dans New Horizons for Industry 4.0 in Modern Business, 209–32. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20443-2_10.
Texte intégralAmuda, Muhammed Olawale Hakeem, et Esther Titilayo Akinlabi. « Trend and Development in Laser Surface Modification for Enhanced Materials Properties ». Dans Additive Manufacturing, 271–95. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9624-0.ch011.
Texte intégralErinosho, Mutiu F., Esther T. Akinlabi et Sisa Pityana. « Enhancement of Surface Integrity of Titanium Alloy With Copper by Means of Laser Metal Deposition Process ». Dans Additive Manufacturing, 245–70. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9624-0.ch010.
Texte intégralGajakosh, Amithkumar, R. Suresh Kumar, V. Mohanavel, Ragavanantham Shanmugam et Monsuru Ramoni. « Application of Machine Learning Techniques in Additive Manufacturing : A Review ». Dans Applications of Artificial Intelligence in Additive Manufacturing, 1–24. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-8516-0.ch001.
Texte intégralKubade, Pravin R., Hrushikesh B. Kulkarni et Vinayak C. Gavali. « Property Enhancement of Carbon Fiber-Reinforced Polylactic Acid Composites Prepared by Fused-Deposition Modeling ». Dans Advances in Computer and Electrical Engineering, 455–78. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-0117-7.ch017.
Texte intégralBhuyan, Dheeman. « Design of Prosthetic Heart Valve and Application of Additive Manufacturing ». Dans Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement, 482–91. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-8050-9.ch024.
Texte intégralKaushik, Brahmansh, et S. Anand Kumar. « Computer vision based online monitoring technique : part quality enhancement in the selective laser melting process ». Dans Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing, 167–94. Elsevier, 2023. http://dx.doi.org/10.1016/b978-0-323-91834-3.00007-7.
Texte intégralBarua, Ranjit, Sudipto Datta, Amit Roychowdhury et Pallab Datta. « Importance of 3D Printing Technology in Medical Fields ». Dans Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement, 704–17. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-8050-9.ch036.
Texte intégralActes de conférences sur le sujet "Enhancement additive manufacturing"
Kulkarni, Anup, Vivek C. Peddiraju, Subhradeep Chatterjee et Dheepa Srinivasan. « Effect of Build Geometry and Porosity in Additively Manufactured CuCrZr ». Dans 2022 International Additive Manufacturing Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/iam2022-93986.
Texte intégralBillings, Christopher, Zahed Siddique et Yingtao Liu. « Enhancement of Mechanical Engineering Education With Additive Manufacturing Projects ». Dans ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24568.
Texte intégralWong, Kin Keong, Kai Choong Leong et S. B. Tor. « HEAT TRANSFER ENHANCEMENT OF SURFACES FOR POOL BOILING USING ADDITIVE MANUFACTURING ». Dans First Thermal and Fluids Engineering Summer Conference. Connecticut : Begellhouse, 2016. http://dx.doi.org/10.1615/tfesc1.hte.012717.
Texte intégralStafford, Gabriel J., Stephen T. McClain, David R. Hanson, Robert F. Kunz et Karen A. Thole. « Convection in Scaled Turbine Internal Cooling Passages With Additive Manufacturing Roughness ». Dans ASME Turbo Expo 2021 : Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/gt2021-59684.
Texte intégralHarding, Kevin G. « Structured light as an enhancement tool for low contrast features in additive manufacturing ». Dans Dimensional Optical Metrology and Inspection for Practical Applications VII, sous la direction de Song Zhang et Kevin G. Harding. SPIE, 2018. http://dx.doi.org/10.1117/12.2302882.
Texte intégralNawafleh, Nashat, et Emrah Celik. « Direct Write Additive Manufacturing of High-Strength, Short Fiber Reinforced Sandwich Panels ». Dans ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24501.
Texte intégralFatoba, O. S., S. A. Akinlabi, E. T. Akinlabi, L. C. Naidoo, A. A. Adediran et O. S. Odebiyi. « Microstructural Enhancement and Performance of Additive Manufactured Titanium Alloy Grade 5 Composite Coatings ». Dans ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24125.
Texte intégralFatoba, Olawale Samuel, Tien-Chien Jen et Esther Titilayo Akinlabi. « Characterization. Performance and Microstructural Enhancement of Additive Manufactured AI-Si-Sn-Cu/Ti -6A1-4 V Composite Coatings ». Dans 2022 IEEE 13th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT). IEEE, 2022. http://dx.doi.org/10.1109/icmimt55556.2022.9845310.
Texte intégralGong, Xibing, James Lydon, Kenneth Cooper et Kevin Chou. « Microstructural Analysis and Nanoindentation Characterization of Ti-6Al-4V Parts From Electron Beam Additive Manufacturing ». Dans ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-36675.
Texte intégralWei, Chao, Gabriel Alexander Vasquez Diaz, Kun Wang et Peiwen Li. « CFD Analysis and Evaluation of Heat Transfer Enhancement of Internal Flow in Tubes With 3D-Printed Complex Fins ». Dans ASME 2019 Heat Transfer Summer Conference collocated with the ASME 2019 13th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ht2019-3630.
Texte intégralRapports d'organisations sur le sujet "Enhancement additive manufacturing"
Helge, Torgersen, dir. Additive bio-manufacturing : 3D printing for medical recovery and human enhancement. Vienna : self, 2018. http://dx.doi.org/10.1553/ita-pb-stoa-3d-2018.
Texte intégral